Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (26 commits)
  V4L/DVB (6548): pvrusb2: Fix oops on module removal
  V4L/DVB (6547): V4L: remove PCI from VIDEO_VIVI depends
  V4L/DVB (6532): Add the remaining addresses for tda9887
  V4L/DVB (6531): Fix a regression caused by commit 15396236
  V4L/DVB (6518): Fix tvp5150 default values
  V4L/DVB (6514): em28xx: Include linux/mm.h
  V4L/DVB (6506): saa7134-alsa: Fix mmap support
  V4L/DVB (6504): pvrusb2: Remove dead sysfs code
  V4L/DVB (6503): pvrusb2: Fix associativity logic error
  V4L/DVB (6501): stv0297: Signal strength fixes
  V4L/DVB (6500): tda10021: Fix reported signal strength
  V4L/DVB (6499): tda10021: Bit error counting fixed
  V4L/DVB (6498): ves1820: Change the acquisition range for clock recovery from 120 ppm to 240ppm
  V4L/DVB (6495): saa7146: saa7146_wait_for_debi_done fixes
  V4L/DVB (6479): use input functions, should depend on INPUT
  V4L/DVB (6478): ir-functions use input functions, should depend on INPUT
  V4L/DVB (6432): tuner: fix CONFIG_TUNER_TEA5761=m
  V4L/DVB (6407): planb: fix obvious interrupt handling bugs
  V4L/DVB (6406): saa7134: fix analog audio in on medion md8800 quadro
  V4L/DVB (6403): mt2131: replace comma with semicolon fix
  ...

Documentation/video4linux/CARDLIST.em28xx

@@ -8,4 +8,7 @@
   7 -> Leadtek Winfast USB II                   (em2800)
   8 -> Kworld USB2800                           (em2800)
   9 -> Pinnacle Dazzle DVC 90                   (em2820/em2840) [2304:0207]
+ 10 -> Hauppauge WinTV HVR 900                  (em2880)
+ 11 -> Terratec Hybrid XS                       (em2880)
  12 -> Kworld PVR TV 2800 RF                    (em2820/em2840)
+ 13 -> Terratec Prodigy XS                      (em2880)

drivers/media/Kconfig

@@ -151,6 +151,7 @@ config VIDEO_IR_I2C
 
 config VIDEO_IR
 	tristate
+	depends on INPUT
 	select VIDEO_IR_I2C if I2C
 
 config VIDEO_TVEEPROM

drivers/media/common/saa7146_core.c

@@ -59,43 +59,89 @@ void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data)
 }
 
 /* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */
-int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
+static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev,
+				unsigned long us1, unsigned long us2)
 {
-	unsigned long start;
+	unsigned long timeout;
 	int err;
 
 	/* wait for registers to be programmed */
-	start = jiffies;
+	timeout = jiffies + usecs_to_jiffies(us1);
 	while (1) {
-		err = time_after(jiffies, start + HZ/20);
+		err = time_after(jiffies, timeout);
 		if (saa7146_read(dev, MC2) & 2)
 			break;
 		if (err) {
-			DEB_S(("timed out while waiting for registers getting programmed\n"));
+			printk(KERN_ERR "%s: %s timed out while waiting for "
+					"registers getting programmed\n",
+					dev->name, __FUNCTION__);
 			return -ETIMEDOUT;
 		}
-		if (nobusyloop)
-			msleep(1);
+		msleep(1);
 	}
 
 	/* wait for transfer to complete */
-	start = jiffies;
+	timeout = jiffies + usecs_to_jiffies(us2);
 	while (1) {
-		err = time_after(jiffies, start + HZ/4);
+		err = time_after(jiffies, timeout);
 		if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
 			break;
 		saa7146_read(dev, MC2);
 		if (err) {
-			DEB_S(("timed out while waiting for transfer completion\n"));
+			DEB_S(("%s: %s timed out while waiting for transfer "
+				"completion\n",	dev->name, __FUNCTION__));
 			return -ETIMEDOUT;
 		}
-		if (nobusyloop)
-			msleep(1);
+		msleep(1);
 	}
 
 	return 0;
 }
 
+static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev,
+				unsigned long us1, unsigned long us2)
+{
+	unsigned long loops;
+
+	/* wait for registers to be programmed */
+	loops = us1;
+	while (1) {
+		if (saa7146_read(dev, MC2) & 2)
+			break;
+		if (!loops--) {
+			printk(KERN_ERR "%s: %s timed out while waiting for "
+					"registers getting programmed\n",
+					dev->name, __FUNCTION__);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	}
+
+	/* wait for transfer to complete */
+	loops = us2 / 5;
+	while (1) {
+		if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
+			break;
+		saa7146_read(dev, MC2);
+		if (!loops--) {
+			DEB_S(("%s: %s timed out while waiting for transfer "
+				"completion\n", dev->name, __FUNCTION__));
+			return -ETIMEDOUT;
+		}
+		udelay(5);
+	}
+
+	return 0;
+}
+
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
+{
+	if (nobusyloop)
+		return saa7146_wait_for_debi_done_sleep(dev, 50000, 250000);
+	else
+		return saa7146_wait_for_debi_done_busyloop(dev, 50000, 250000);
+}
+
 /****************************************************************************
  * general helper functions
  ****************************************************************************/

drivers/media/dvb/frontends/mt2131.c

@@ -116,7 +116,7 @@ static int mt2131_set_params(struct dvb_frontend *fe,
 	f_lo1 = (f_lo1 / 250) * 250;
 	f_lo2 = f_lo1 - freq - MT2131_IF2;
 
-	priv->frequency =  (f_lo1 - f_lo2 - MT2131_IF2) * 1000,
+	priv->frequency =  (f_lo1 - f_lo2 - MT2131_IF2) * 1000;
 
 	/* Frequency LO1 = 16MHz * (DIV1 + NUM1/8192 ) */
 	num1 = f_lo1 * 64 / (MT2131_FREF / 128);

drivers/media/dvb/frontends/s5h1409.c

@@ -42,6 +42,9 @@ struct s5h1409_state {
 	fe_modulation_t current_modulation;
 
 	u32 current_frequency;
+
+	u32 is_qam_locked;
+	u32 qam_state;
 };
 
 static int debug = 0;
@@ -94,6 +97,7 @@ static struct init_tab {
 	{ 0xac, 0x1003, },
 	{ 0xad, 0x103f, },
 	{ 0xe2, 0x0100, },
+	{ 0xe3, 0x0000, },
 	{ 0x28, 0x1010, },
 	{ 0xb1, 0x000e, },
 };
@@ -335,6 +339,8 @@ static int s5h1409_softreset(struct dvb_frontend* fe)
 
 	s5h1409_writereg(state, 0xf5, 0);
 	s5h1409_writereg(state, 0xf5, 1);
+	state->is_qam_locked = 0;
+	state->qam_state = 0;
 	return 0;
 }
 
@@ -349,6 +355,11 @@ static int s5h1409_set_if_freq(struct dvb_frontend* fe, int KHz)
 		s5h1409_writereg(state, 0x87, 0x01be);
 		s5h1409_writereg(state, 0x88, 0x0436);
 		s5h1409_writereg(state, 0x89, 0x054d);
+	} else
+	if (KHz == 4000) {
+		s5h1409_writereg(state, 0x87, 0x014b);
+		s5h1409_writereg(state, 0x88, 0x0cb5);
+		s5h1409_writereg(state, 0x89, 0x03e2);
 	} else {
 		printk("%s() Invalid arg = %d KHz\n", __FUNCTION__, KHz);
 		ret = -1;
@@ -361,7 +372,7 @@ static int s5h1409_set_spectralinversion(struct dvb_frontend* fe, int inverted)
 {
 	struct s5h1409_state* state = fe->demodulator_priv;
 
-	dprintk("%s()\n", __FUNCTION__);
+	dprintk("%s(%d)\n", __FUNCTION__, inverted);
 
 	if(inverted == 1)
 		return s5h1409_writereg(state, 0x1b, 0x1101); /* Inverted */
@@ -382,14 +393,10 @@ static int s5h1409_enable_modulation(struct dvb_frontend* fe,
 		s5h1409_writereg(state, 0xf4, 0);
 		break;
 	case QAM_64:
-		dprintk("%s() QAM_64\n", __FUNCTION__);
-		s5h1409_writereg(state, 0xf4, 1);
-		s5h1409_writereg(state, 0x85, 0x100);
-		break;
 	case QAM_256:
-		dprintk("%s() QAM_256\n", __FUNCTION__);
+		dprintk("%s() QAM_AUTO (64/256)\n", __FUNCTION__);
 		s5h1409_writereg(state, 0xf4, 1);
-		s5h1409_writereg(state, 0x85, 0x101);
+		s5h1409_writereg(state, 0x85, 0x110);
 		break;
 	default:
 		dprintk("%s() Invalid modulation\n", __FUNCTION__);
@@ -423,7 +430,7 @@ static int s5h1409_set_gpio(struct dvb_frontend* fe, int enable)
 	if (enable)
 		return s5h1409_writereg(state, 0xe3, 0x1100);
 	else
-		return s5h1409_writereg(state, 0xe3, 0);
+		return s5h1409_writereg(state, 0xe3, 0x1000);
 }
 
 static int s5h1409_sleep(struct dvb_frontend* fe, int enable)
@@ -444,6 +451,66 @@ static int s5h1409_register_reset(struct dvb_frontend* fe)
 	return s5h1409_writereg(state, 0xfa, 0);
 }
 
+static void s5h1409_set_qam_amhum_mode(struct dvb_frontend *fe)
+{
+	struct s5h1409_state *state = fe->demodulator_priv;
+	u16 reg;
+
+	if (state->is_qam_locked)
+		return;
+
+	/* QAM EQ lock check */
+	reg = s5h1409_readreg(state, 0xf0);
+
+	if ((reg >> 13) & 0x1) {
+
+		state->is_qam_locked = 1;
+		reg &= 0xff;
+
+		s5h1409_writereg(state, 0x96, 0x00c);
+		if ((reg < 0x38) || (reg > 0x68) ) {
+			s5h1409_writereg(state, 0x93, 0x3332);
+			s5h1409_writereg(state, 0x9e, 0x2c37);
+		} else {
+			s5h1409_writereg(state, 0x93, 0x3130);
+			s5h1409_writereg(state, 0x9e, 0x2836);
+		}
+
+	} else {
+		s5h1409_writereg(state, 0x96, 0x0008);
+		s5h1409_writereg(state, 0x93, 0x3332);
+		s5h1409_writereg(state, 0x9e, 0x2c37);
+	}
+}
+
+static void s5h1409_set_qam_interleave_mode(struct dvb_frontend *fe)
+{
+	struct s5h1409_state *state = fe->demodulator_priv;
+	u16 reg, reg1, reg2;
+
+	reg = s5h1409_readreg(state, 0xf1);
+
+	/* Master lock */
+	if ((reg >> 15) & 0x1) {
+		if (state->qam_state != 2) {
+			state->qam_state = 2;
+			reg1 = s5h1409_readreg(state, 0xb2);
+			reg2 = s5h1409_readreg(state, 0xad);
+
+			s5h1409_writereg(state, 0x96, 0x20);
+			s5h1409_writereg(state, 0xad,
+				( ((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff)) );
+			s5h1409_writereg(state, 0xab, 0x1100);
+		}
+	} else {
+		if (state->qam_state != 1) {
+			state->qam_state = 1;
+			s5h1409_writereg(state, 0x96, 0x08);
+			s5h1409_writereg(state, 0xab, 0x1101);
+		}
+	}
+}
+
 /* Talk to the demod, set the FEC, GUARD, QAM settings etc */
 static int s5h1409_set_frontend (struct dvb_frontend* fe,
 				 struct dvb_frontend_parameters *p)
@@ -458,12 +525,21 @@ static int s5h1409_set_frontend (struct dvb_frontend* fe,
 
 	s5h1409_enable_modulation(fe, p->u.vsb.modulation);
 
+	/* Allow the demod to settle */
+	msleep(100);
+
 	if (fe->ops.tuner_ops.set_params) {
 		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1);
 		fe->ops.tuner_ops.set_params(fe, p);
 		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
 	}
 
+	/* Optimize the demod for QAM */
+	if (p->u.vsb.modulation != VSB_8) {
+		s5h1409_set_qam_amhum_mode(fe);
+		s5h1409_set_qam_interleave_mode(fe);
+	}
+
 	return 0;
 }
 
@@ -495,8 +571,8 @@ static int s5h1409_init (struct dvb_frontend* fe)
 	s5h1409_set_gpio(fe, state->config->gpio);
 	s5h1409_softreset(fe);
 
-	/* Note: Leaving the I2C gate open here. */
-	s5h1409_i2c_gate_ctrl(fe, 1);
+	/* Note: Leaving the I2C gate closed. */
+	s5h1409_i2c_gate_ctrl(fe, 0);
 
 	return 0;
 }

drivers/media/dvb/frontends/stv0297.c

@@ -358,11 +358,23 @@ static int stv0297_read_ber(struct dvb_frontend *fe, u32 * ber)
 static int stv0297_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
 {
 	struct stv0297_state *state = fe->demodulator_priv;
-	u8 STRENGTH[2];
-
-	stv0297_readregs(state, 0x41, STRENGTH, 2);
-	*strength = (STRENGTH[1] & 0x03) << 8 | STRENGTH[0];
-
+	u8 STRENGTH[3];
+	u16 tmp;
+
+	stv0297_readregs(state, 0x41, STRENGTH, 3);
+	tmp = (STRENGTH[1] & 0x03) << 8 | STRENGTH[0];
+	if (STRENGTH[2] & 0x20) {
+		if (tmp < 0x200)
+			tmp = 0;
+		else
+			tmp = tmp - 0x200;
+	} else {
+		if (tmp > 0x1ff)
+			tmp = 0;
+		else
+			tmp = 0x1ff - tmp;
+	}
+	*strength = (tmp << 7) | (tmp >> 2);
 	return 0;
 }
 

drivers/media/dvb/frontends/tda10021.c

@@ -301,6 +301,8 @@ static int tda10021_read_ber(struct dvb_frontend* fe, u32* ber)
 	u32 _ber = tda10021_readreg(state, 0x14) |
 		(tda10021_readreg(state, 0x15) << 8) |
 		((tda10021_readreg(state, 0x16) & 0x0f) << 16);
+	_tda10021_writereg(state, 0x10, (tda10021_readreg(state, 0x10) & ~0xc0)
+					| (tda10021_inittab[0x10] & 0xc0));
 	*ber = 10 * _ber;
 
 	return 0;
@@ -310,7 +312,11 @@ static int tda10021_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
 	struct tda10021_state* state = fe->demodulator_priv;
 
+	u8 config = tda10021_readreg(state, 0x02);
 	u8 gain = tda10021_readreg(state, 0x17);
+	if (config & 0x02)
+		/* the agc value is inverted */
+		gain = ~gain;
 	*strength = (gain << 8) | gain;
 
 	return 0;

drivers/media/dvb/frontends/ves1820.c

@@ -47,7 +47,7 @@ struct ves1820_state {
 static int verbose;
 
 static u8 ves1820_inittab[] = {
-	0x69, 0x6A, 0x93, 0x12, 0x12, 0x46, 0x26, 0x1A,
+	0x69, 0x6A, 0x93, 0x1A, 0x12, 0x46, 0x26, 0x1A,
 	0x43, 0x6A, 0xAA, 0xAA, 0x1E, 0x85, 0x43, 0x20,
 	0xE0, 0x00, 0xA1, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,

drivers/media/dvb/ttpci/Kconfig

@@ -84,7 +84,7 @@ config DVB_BUDGET
 
 config DVB_BUDGET_CI
 	tristate "Budget cards with onboard CI connector"
-	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1 && INPUT
 	select VIDEO_SAA7146
 	select DVB_STV0297 if !DVB_FE_CUSTOMISE
 	select DVB_STV0299 if !DVB_FE_CUSTOMISE

drivers/media/video/Kconfig

@@ -363,7 +363,7 @@ endmenu # encoder / decoder chips
 
 config VIDEO_VIVI
 	tristate "Virtual Video Driver"
-	depends on VIDEO_V4L2 && !SPARC32 && !SPARC64 && PCI
+	depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
 	select VIDEOBUF_VMALLOC
 	default n
 	---help---

drivers/media/video/bt8xx/bttv-driver.c

@@ -2881,10 +2881,6 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
 		if (NULL == fmt)
 			return -EINVAL;
 		mutex_lock(&fh->cap.lock);
-		if (fmt->depth != pic->depth) {
-			retval = -EINVAL;
-			goto fh_unlock_and_return;
-		}
 		if (fmt->flags & FORMAT_FLAGS_RAW) {
 			/* VIDIOCMCAPTURE uses gbufsize, not RAW_BPL *
 			   RAW_LINES * 2. F1 is stored at offset 0, F2
@@ -3117,6 +3113,8 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
 					     vm->width,vm->height,field);
 		if (0 != retval)
 			goto fh_unlock_and_return;
+		btv->init.width = vm->width;
+		btv->init.height = vm->height;
 		spin_lock_irqsave(&btv->s_lock,flags);
 		buffer_queue(&fh->cap,&buf->vb);
 		spin_unlock_irqrestore(&btv->s_lock,flags);

drivers/media/video/cafe_ccic.c

@@ -3,6 +3,9 @@
  * multifunction chip.  Currently works with the Omnivision OV7670
  * sensor.
  *
+ * The data sheet for this device can be found at:
+ *    http://www.marvell.com/products/pcconn/88ALP01.jsp
+ *
  * Copyright 2006 One Laptop Per Child Association, Inc.
  * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
  *
@@ -2232,13 +2235,16 @@ static int cafe_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct cafe_camera *cam = cafe_find_by_pdev(pdev);
 	int ret;
+	enum cafe_state cstate;
 
 	ret = pci_save_state(pdev);
 	if (ret)
 		return ret;
+	cstate = cam->state; /* HACK - stop_dma sets to idle */
 	cafe_ctlr_stop_dma(cam);
 	cafe_ctlr_power_down(cam);
 	pci_disable_device(pdev);
+	cam->state = cstate;
 	return 0;
 }
 

drivers/media/video/cx23885/Kconfig

 config VIDEO_CX23885
 	tristate "Conexant cx23885 (2388x successor) support"
-	depends on DVB_CORE && VIDEO_DEV && PCI && I2C
+	depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT
 	select I2C_ALGOBIT
 	select FW_LOADER
 	select VIDEO_BTCX

drivers/media/video/cx88/Kconfig

 config VIDEO_CX88
 	tristate "Conexant 2388x (bt878 successor) support"
-	depends on VIDEO_DEV && PCI && I2C
+	depends on VIDEO_DEV && PCI && I2C && INPUT
 	select I2C_ALGOBIT
 	select FW_LOADER
 	select VIDEO_BTCX

drivers/media/video/em28xx/Kconfig

 config VIDEO_EM28XX
 	tristate "Empia EM2800/2820/2840 USB video capture support"
-	depends on VIDEO_V4L1 && I2C
+	depends on VIDEO_V4L1 && I2C && INPUT
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_IR

drivers/media/video/em28xx/em28xx-i2c.c

@@ -416,8 +416,10 @@ static int attach_inform(struct i2c_client *client)
 	struct em28xx *dev = client->adapter->algo_data;
 
 	switch (client->addr << 1) {
-		case 0x43:
-		case 0x4b:
+		case 0x86:
+		case 0x84:
+		case 0x96:
+		case 0x94:
 		{
 			struct tuner_setup tun_setup;
 

drivers/media/video/em28xx/em28xx-video.c

@@ -32,6 +32,7 @@
 #include <linux/usb.h>
 #include <linux/i2c.h>
 #include <linux/version.h>
+#include <linux/mm.h>
 #include <linux/video_decoder.h>
 #include <linux/mutex.h>
 

drivers/media/video/planb.c

@@ -91,7 +91,6 @@ static void planb_close(struct video_device *);
 static int planb_ioctl(struct video_device *, unsigned int, void *);
 static int planb_init_done(struct video_device *);
 static int planb_mmap(struct video_device *, const char *, unsigned long);
-static void planb_irq(int, void *);
 static void release_planb(void);
 int init_planbs(struct video_init *);
 
@@ -1315,7 +1314,7 @@ static volatile struct dbdma_cmd *setup_grab_cmd(int fr, struct planb *pb)
 	return c1;
 }
 
-static void planb_irq(int irq, void *dev_id)
+static irqreturn_t planb_irq(int irq, void *dev_id)
 {
 	unsigned int stat, astat;
 	struct planb *pb = (struct planb *)dev_id;
@@ -1358,13 +1357,14 @@ static void planb_irq(int irq, void *dev_id)
 		pb->frame_stat[fr] = GBUFFER_DONE;
 		pb->grabbing--;
 		wake_up_interruptible(&pb->capq);
-		return;
+		return IRQ_HANDLED;
 	}
 	/* incorrect interrupts? */
 	pb->intr_mask = PLANB_CLR_IRQ;
 	out_le32(&pb->planb_base->intr_stat, PLANB_CLR_IRQ);
 	printk(KERN_ERR "PlanB: IRQ lockup, cleared intrrupts"
 							" unconditionally\n");
+	return IRQ_HANDLED;
 }
 
 /*******************************
@@ -2090,7 +2090,7 @@ static int init_planb(struct planb *pb)
 	/* clear interrupt mask */
 	pb->intr_mask = PLANB_CLR_IRQ;
 
-	result = request_irq(pb->irq, planb_irq, 0, "PlanB", (void *)pb);
+	result = request_irq(pb->irq, planb_irq, 0, "PlanB", pb);
 	if (result < 0) {
 		if (result==-EINVAL)
 			printk(KERN_ERR "PlanB: Bad irq number (%d) "

drivers/media/video/pvrusb2/pvrusb2-ctrl.c

@@ -410,7 +410,7 @@ static int parse_mtoken(const char *ptr,unsigned int len,
 	int msk;
 	*valptr = 0;
 	for (idx = 0, msk = 1; valid_bits; idx++, msk <<= 1) {
-		if (!msk & valid_bits) continue;
+		if (!(msk & valid_bits)) continue;
 		valid_bits &= ~msk;
 		if (!names[idx]) continue;
 		slen = strlen(names[idx]);

drivers/media/video/pvrusb2/pvrusb2-main.c

@@ -136,14 +136,13 @@ static int __init pvr_init(void)
 
 static void __exit pvr_exit(void)
 {
-
 	pvr2_trace(PVR2_TRACE_INIT,"pvr_exit");
 
+	usb_deregister(&pvr_driver);
+
 #ifdef CONFIG_VIDEO_PVRUSB2_SYSFS
 	pvr2_sysfs_class_destroy(class_ptr);
 #endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */
-
-	usb_deregister(&pvr_driver);
 }
 
 module_init(pvr_init);