Merge tag 'usb-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a bunch (65) of USB fixes for 4.7-rc4.  Sorry about the
  quantity, I've been slow in getting these out.

  The majority are the "normal" gadget, musb, and xhci fixes, that we
  all are used to.  There are also a few other tiny fixes resolving a
  number of reported issues that showed up in 4.7-rc1.

  All of these have been in linux-next"

* tag 'usb-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits)
  usbip: rate limit get_frame_number message
  usb: musb: sunxi: Remove bogus "Frees glue" comment
  usb: musb: sunxi: Fix NULL ptr deref when gadget is registered before musb
  usb: echi-hcd: Add ehci_setup check before echi_shutdown
  usb: host: ehci-msm: Conditionally call ehci suspend/resume
  MAINTAINERS: Add file patterns for usb device tree bindings
  usb: host: ehci-tegra: Avoid getting the same reset twice
  usb: host: ehci-tegra: Grab the correct UTMI pads reset
  USB: mos7720: delete parport
  USB: OHCI: Don't mark EDs as ED_OPER if scheduling fails
  phy: ti-pipe3: Program the DPLL even if it was already locked
  usb: musb: Stop bulk endpoint while queue is rotated
  usb: musb: Ensure rx reinit occurs for shared_fifo endpoints
  usb: musb: host: correct cppi dma channel for isoch transfer
  usb: musb: only restore devctl when session was set in backup
  usb: phy: Check initial state for twl6030
  usb: musb: Use normal module_init for 2430 glue
  usb: musb: Remove pm_runtime_set_irq_safe
  usb: musb: Remove extra PM runtime calls from 2430 glue layer
  usb: musb: Return error value from musb_mailbox
  ...

Documentation/ABI/testing/configfs-usb-gadget-uvc

 What:		/config/usb-gadget/gadget/functions/uvc.name
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	UVC function directory
 
 		streaming_maxburst	- 0..15 (ss only)
@@ -9,37 +9,37 @@ Description:	UVC function directory
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Control descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/class
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Class descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/class/ss
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Super speed control class descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/class/fs
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Full speed control class descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/terminal
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Terminal descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/terminal/output
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Output terminal descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/terminal/output/default
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Default output terminal descriptors
 
 		All attributes read only:
@@ -53,12 +53,12 @@ Description:	Default output terminal descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Camera terminal descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera/default
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Default camera terminal descriptors
 
 		All attributes read only:
@@ -75,12 +75,12 @@ Description:	Default camera terminal descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/processing
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Processing unit descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/processing/default
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Default processing unit descriptors
 
 		All attributes read only:
@@ -94,49 +94,49 @@ Description:	Default processing unit descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/header
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Control header descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/header/name
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Specific control header descriptors
 
 dwClockFrequency
 bcdUVC
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Streaming descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/class
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Streaming class descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/class/ss
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Super speed streaming class descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/class/hs
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	High speed streaming class descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/class/fs
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Full speed streaming class descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Color matching descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching/default
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Default color matching descriptors
 
 		All attributes read only:
@@ -150,12 +150,12 @@ Description:	Default color matching descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	MJPEG format descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Specific MJPEG format descriptors
 
 		All attributes read only,
@@ -174,7 +174,7 @@ Description:	Specific MJPEG format descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name/name
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Specific MJPEG frame descriptors
 
 		dwFrameInterval		- indicates how frame interval can be
@@ -196,12 +196,12 @@ Description:	Specific MJPEG frame descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Uncompressed format descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Specific uncompressed format descriptors
 
 		bmaControls		- this format's data for bmaControls in
@@ -221,7 +221,7 @@ Description:	Specific uncompressed format descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name/name
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Specific uncompressed frame descriptors
 
 		dwFrameInterval		- indicates how frame interval can be
@@ -243,12 +243,12 @@ Description:	Specific uncompressed frame descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/header
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Streaming header descriptors
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/header/name
 Date:		Dec 2014
-KernelVersion:	3.20
+KernelVersion:	4.0
 Description:	Specific streaming header descriptors
 
 		All attributes read only:

MAINTAINERS

@@ -11975,6 +11975,7 @@ L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
 S:	Supported
+F:	Documentation/devicetree/bindings/usb/
 F:	Documentation/usb/
 F:	drivers/usb/
 F:	include/linux/usb.h

drivers/phy/phy-exynos-mipi-video.c

@@ -233,8 +233,12 @@ static inline int __is_running(const struct exynos_mipi_phy_desc *data,
 			struct exynos_mipi_video_phy *state)
 {
 	u32 val;
+	int ret;
+
+	ret = regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val);
+	if (ret)
+		return 0;
 
-	regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val);
 	return val & data->resetn_val;
 }
 

drivers/phy/phy-ti-pipe3.c

@@ -293,11 +293,18 @@ static int ti_pipe3_init(struct phy *x)
 		ret = ti_pipe3_dpll_wait_lock(phy);
 	}
 
-	/* Program the DPLL only if not locked */
+	/* SATA has issues if re-programmed when locked */
 	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
-	if (!(val & PLL_LOCK))
-		if (ti_pipe3_dpll_program(phy))
-			return -EINVAL;
+	if ((val & PLL_LOCK) && of_device_is_compatible(phy->dev->of_node,
+							"ti,phy-pipe3-sata"))
+		return ret;
+
+	/* Program the DPLL */
+	ret = ti_pipe3_dpll_program(phy);
+	if (ret) {
+		ti_pipe3_disable_clocks(phy);
+		return -EINVAL;
+	}
 
 	return ret;
 }

drivers/phy/phy-twl4030-usb.c

@@ -463,7 +463,8 @@ static int twl4030_phy_power_on(struct phy *phy)
 	twl4030_usb_set_mode(twl, twl->usb_mode);
 	if (twl->usb_mode == T2_USB_MODE_ULPI)
 		twl4030_i2c_access(twl, 0);
-	schedule_delayed_work(&twl->id_workaround_work, 0);
+	twl->linkstat = MUSB_UNKNOWN;
+	schedule_delayed_work(&twl->id_workaround_work, HZ);
 
 	return 0;
 }
@@ -537,6 +538,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 	struct twl4030_usb *twl = _twl;
 	enum musb_vbus_id_status status;
 	bool status_changed = false;
+	int err;
 
 	status = twl4030_usb_linkstat(twl);
 
@@ -567,7 +569,9 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 			pm_runtime_mark_last_busy(twl->dev);
 			pm_runtime_put_autosuspend(twl->dev);
 		}
-		musb_mailbox(status);
+		err = musb_mailbox(status);
+		if (err)
+			twl->linkstat = MUSB_UNKNOWN;
 	}
 
 	/* don't schedule during sleep - irq works right then */
@@ -595,7 +599,8 @@ static int twl4030_phy_init(struct phy *phy)
 	struct twl4030_usb *twl = phy_get_drvdata(phy);
 
 	pm_runtime_get_sync(twl->dev);
-	schedule_delayed_work(&twl->id_workaround_work, 0);
+	twl->linkstat = MUSB_UNKNOWN;
+	schedule_delayed_work(&twl->id_workaround_work, HZ);
 	pm_runtime_mark_last_busy(twl->dev);
 	pm_runtime_put_autosuspend(twl->dev);
 
@@ -763,7 +768,8 @@ static int twl4030_usb_remove(struct platform_device *pdev)
 	if (cable_present(twl->linkstat))
 		pm_runtime_put_noidle(twl->dev);
 	pm_runtime_mark_last_busy(twl->dev);
-	pm_runtime_put_sync_suspend(twl->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_put_sync(twl->dev);
 	pm_runtime_disable(twl->dev);
 
 	/* autogate 60MHz ULPI clock,

drivers/usb/core/quirks.c

@@ -44,6 +44,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Creative SB Audigy 2 NX */
 	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* USB3503 */
+	{ USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Microsoft Wireless Laser Mouse 6000 Receiver */
 	{ USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -173,6 +176,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* MAYA44USB sound device */
 	{ USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* ASUS Base Station(T100) */
+	{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
+			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
 	/* Action Semiconductor flash disk */
 	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },
@@ -188,26 +195,22 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x1908, 0x1315), .driver_info =
 			USB_QUIRK_HONOR_BNUMINTERFACES },
 
-	/* INTEL VALUE SSD */
-	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
-
-	/* USB3503 */
-	{ USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME },
-
-	/* ASUS Base Station(T100) */
-	{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
-			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
-
 	/* Protocol and OTG Electrical Test Device */
 	{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
 			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
 
+	/* Acer C120 LED Projector */
+	{ USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* Blackmagic Design Intensity Shuttle */
 	{ USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM },
 
 	/* Blackmagic Design UltraStudio SDI */
 	{ USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* INTEL VALUE SSD */
+	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	{ }  /* terminating entry must be last */
 };
 

drivers/usb/dwc2/core.h

@@ -64,6 +64,17 @@
 	DWC2_TRACE_SCHEDULER_VB(pr_fmt("%s: SCH: " fmt),		\
 				dev_name(hsotg->dev), ##__VA_ARGS__)
 
+#ifdef CONFIG_MIPS
+/*
+ * There are some MIPS machines that can run in either big-endian
+ * or little-endian mode and that use the dwc2 register without
+ * a byteswap in both ways.
+ * Unlike other architectures, MIPS apparently does not require a
+ * barrier before the __raw_writel() to synchronize with DMA but does
+ * require the barrier after the __raw_writel() to serialize a set of
+ * writes. This set of operations was added specifically for MIPS and
+ * should only be used there.
+ */
 static inline u32 dwc2_readl(const void __iomem *addr)
 {
 	u32 value = __raw_readl(addr);
@@ -90,6 +101,22 @@ static inline void dwc2_writel(u32 value, void __iomem *addr)
 	pr_info("INFO:: wrote %08x to %p\n", value, addr);
 #endif
 }
+#else
+/* Normal architectures just use readl/write */
+static inline u32 dwc2_readl(const void __iomem *addr)
+{
+	return readl(addr);
+}
+
+static inline void dwc2_writel(u32 value, void __iomem *addr)
+{
+	writel(value, addr);
+
+#ifdef DWC2_LOG_WRITES
+	pr_info("info:: wrote %08x to %p\n", value, addr);
+#endif
+}
+#endif
 
 /* Maximum number of Endpoints/HostChannels */
 #define MAX_EPS_CHANNELS	16

drivers/usb/dwc2/gadget.c

@@ -1018,7 +1018,7 @@ static int dwc2_hsotg_process_req_status(struct dwc2_hsotg *hsotg,
 	return 1;
 }
 
-static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value);
+static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now);
 
 /**
  * get_ep_head - return the first request on the endpoint
@@ -1094,7 +1094,7 @@ static int dwc2_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
 		case USB_ENDPOINT_HALT:
 			halted = ep->halted;
 
-			dwc2_hsotg_ep_sethalt(&ep->ep, set);
+			dwc2_hsotg_ep_sethalt(&ep->ep, set, true);
 
 			ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0);
 			if (ret) {
@@ -2948,8 +2948,13 @@ static int dwc2_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
  * dwc2_hsotg_ep_sethalt - set halt on a given endpoint
  * @ep: The endpoint to set halt.
  * @value: Set or unset the halt.
+ * @now: If true, stall the endpoint now. Otherwise return -EAGAIN if
+ *       the endpoint is busy processing requests.
+ *
+ * We need to stall the endpoint immediately if request comes from set_feature
+ * protocol command handler.
  */
-static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value)
+static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now)
 {
 	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
 	struct dwc2_hsotg *hs = hs_ep->parent;
@@ -2969,6 +2974,17 @@ static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value)
 		return 0;
 	}
 
+	if (hs_ep->isochronous) {
+		dev_err(hs->dev, "%s is Isochronous Endpoint\n", ep->name);
+		return -EINVAL;
+	}
+
+	if (!now && value && !list_empty(&hs_ep->queue)) {
+		dev_dbg(hs->dev, "%s request is pending, cannot halt\n",
+			ep->name);
+		return -EAGAIN;
+	}
+
 	if (hs_ep->dir_in) {
 		epreg = DIEPCTL(index);
 		epctl = dwc2_readl(hs->regs + epreg);
@@ -3020,7 +3036,7 @@ static int dwc2_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value)
 	int ret = 0;
 
 	spin_lock_irqsave(&hs->lock, flags);
-	ret = dwc2_hsotg_ep_sethalt(ep, value);
+	ret = dwc2_hsotg_ep_sethalt(ep, value, false);
 	spin_unlock_irqrestore(&hs->lock, flags);
 
 	return ret;

drivers/usb/dwc3/core.h

@@ -402,6 +402,7 @@
 #define DWC3_DEPCMD_GET_RSC_IDX(x)	(((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
 #define DWC3_DEPCMD_STATUS(x)		(((x) >> 12) & 0x0F)
 #define DWC3_DEPCMD_HIPRI_FORCERM	(1 << 11)
+#define DWC3_DEPCMD_CLEARPENDIN		(1 << 11)
 #define DWC3_DEPCMD_CMDACT		(1 << 10)
 #define DWC3_DEPCMD_CMDIOC		(1 << 8)
 

drivers/usb/dwc3/dwc3-exynos.c

@@ -128,12 +128,6 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, exynos);
 
-	ret = dwc3_exynos_register_phys(exynos);
-	if (ret) {
-		dev_err(dev, "couldn't register PHYs\n");
-		return ret;
-	}
-
 	exynos->dev	= dev;
 
 	exynos->clk = devm_clk_get(dev, "usbdrd30");
@@ -183,20 +177,29 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
 		goto err3;
 	}
 
+	ret = dwc3_exynos_register_phys(exynos);
+	if (ret) {
+		dev_err(dev, "couldn't register PHYs\n");
+		goto err4;
+	}
+
 	if (node) {
 		ret = of_platform_populate(node, NULL, NULL, dev);
 		if (ret) {
 			dev_err(dev, "failed to add dwc3 core\n");
-			goto err4;
+			goto err5;
 		}
 	} else {
 		dev_err(dev, "no device node, failed to add dwc3 core\n");
 		ret = -ENODEV;
-		goto err4;
+		goto err5;
 	}
 
 	return 0;
 
+err5:
+	platform_device_unregister(exynos->usb2_phy);
+	platform_device_unregister(exynos->usb3_phy);
 err4:
 	regulator_disable(exynos->vdd10);
 err3:

drivers/usb/dwc3/dwc3-st.c

@@ -129,12 +129,18 @@ static int st_dwc3_drd_init(struct st_dwc3 *dwc3_data)
 	switch (dwc3_data->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
 
-		val &= ~(USB3_FORCE_VBUSVALID | USB3_DELAY_VBUSVALID
+		val &= ~(USB3_DELAY_VBUSVALID
 			| USB3_SEL_FORCE_OPMODE | USB3_FORCE_OPMODE(0x3)
 			| USB3_SEL_FORCE_DPPULLDOWN2 | USB3_FORCE_DPPULLDOWN2
 			| USB3_SEL_FORCE_DMPULLDOWN2 | USB3_FORCE_DMPULLDOWN2);
 
-		val |= USB3_DEVICE_NOT_HOST;
+		/*
+		 * USB3_PORT2_FORCE_VBUSVALID When '1' and when
+		 * USB3_PORT2_DEVICE_NOT_HOST = 1, forces VBUSVLDEXT2 input
+		 * of the pico PHY to 1.
+		 */
+
+		val |= USB3_DEVICE_NOT_HOST | USB3_FORCE_VBUSVALID;
 		break;
 
 	case USB_DR_MODE_HOST:

drivers/usb/dwc3/gadget.c

@@ -347,6 +347,28 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 	return ret;
 }
 
+static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep)
+{
+	struct dwc3 *dwc = dep->dwc;
+	struct dwc3_gadget_ep_cmd_params params;
+	u32 cmd = DWC3_DEPCMD_CLEARSTALL;
+
+	/*
+	 * As of core revision 2.60a the recommended programming model
+	 * is to set the ClearPendIN bit when issuing a Clear Stall EP
+	 * command for IN endpoints. This is to prevent an issue where
+	 * some (non-compliant) hosts may not send ACK TPs for pending
+	 * IN transfers due to a mishandled error condition. Synopsys
+	 * STAR 9000614252.
+	 */
+	if (dep->direction && (dwc->revision >= DWC3_REVISION_260A))
+		cmd |= DWC3_DEPCMD_CLEARPENDIN;
+
+	memset(&params, 0, sizeof(params));
+
+	return dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+}
+
 static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
 		struct dwc3_trb *trb)
 {
@@ -1314,8 +1336,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
 		else
 			dep->flags |= DWC3_EP_STALL;
 	} else {
-		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
-			DWC3_DEPCMD_CLEARSTALL, &params);
+		ret = dwc3_send_clear_stall_ep_cmd(dep);
 		if (ret)
 			dev_err(dwc->dev, "failed to clear STALL on %s\n",
 					dep->name);
@@ -2247,7 +2268,6 @@ static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
 
 	for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
 		struct dwc3_ep *dep;
-		struct dwc3_gadget_ep_cmd_params params;
 		int ret;
 
 		dep = dwc->eps[epnum];
@@ -2259,9 +2279,7 @@ static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
 
 		dep->flags &= ~DWC3_EP_STALL;
 
-		memset(&params, 0, sizeof(params));
-		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
-				DWC3_DEPCMD_CLEARSTALL, &params);
+		ret = dwc3_send_clear_stall_ep_cmd(dep);
 		WARN_ON_ONCE(ret);
 	}
 }

drivers/usb/gadget/composite.c

@@ -1868,14 +1868,19 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 				}
 				break;
 			}
-			req->length = value;
-			req->context = cdev;
-			req->zero = value < w_length;
-			value = composite_ep0_queue(cdev, req, GFP_ATOMIC);
-			if (value < 0) {
-				DBG(cdev, "ep_queue --> %d\n", value);
-				req->status = 0;
-				composite_setup_complete(gadget->ep0, req);
+
+			if (value >= 0) {
+				req->length = value;
+				req->context = cdev;
+				req->zero = value < w_length;
+				value = composite_ep0_queue(cdev, req,
+							    GFP_ATOMIC);
+				if (value < 0) {
+					DBG(cdev, "ep_queue --> %d\n", value);
+					req->status = 0;
+					composite_setup_complete(gadget->ep0,
+								 req);
+				}
 			}
 			return value;
 		}

drivers/usb/gadget/configfs.c

@@ -1401,6 +1401,7 @@ static const struct usb_gadget_driver configfs_driver_template = {
 		.owner          = THIS_MODULE,
 		.name		= "configfs-gadget",
 	},
+	.match_existing_only = 1,
 };
 
 static struct config_group *gadgets_make(

drivers/usb/gadget/function/f_fs.c

@@ -2051,7 +2051,7 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type,
 
 		if (len < sizeof(*d) ||
 		    d->bFirstInterfaceNumber >= ffs->interfaces_count ||
-		    d->Reserved1)
+		    !d->Reserved1)
 			return -EINVAL;
 		for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i)
 			if (d->Reserved2[i])
@@ -2729,6 +2729,7 @@ static int _ffs_func_bind(struct usb_configuration *c,
 		func->ffs->ss_descs_count;
 
 	int fs_len, hs_len, ss_len, ret, i;
+	struct ffs_ep *eps_ptr;
 
 	/* Make it a single chunk, less management later on */
 	vla_group(d);
@@ -2777,12 +2778,9 @@ static int _ffs_func_bind(struct usb_configuration *c,
 	       ffs->raw_descs_length);
 
 	memset(vla_ptr(vlabuf, d, inums), 0xff, d_inums__sz);
-	for (ret = ffs->eps_count; ret; --ret) {
-		struct ffs_ep *ptr;
-
-		ptr = vla_ptr(vlabuf, d, eps);
-		ptr[ret].num = -1;
-	}
+	eps_ptr = vla_ptr(vlabuf, d, eps);
+	for (i = 0; i < ffs->eps_count; i++)
+		eps_ptr[i].num = -1;
 
 	/* Save pointers
 	 * d_eps == vlabuf, func->eps used to kfree vlabuf later
@@ -2851,7 +2849,7 @@ static int _ffs_func_bind(struct usb_configuration *c,
 		goto error;
 
 	func->function.os_desc_table = vla_ptr(vlabuf, d, os_desc_table);
-	if (c->cdev->use_os_string)
+	if (c->cdev->use_os_string) {
 		for (i = 0; i < ffs->interfaces_count; ++i) {
 			struct usb_os_desc *desc;
 
@@ -2862,13 +2860,15 @@ static int _ffs_func_bind(struct usb_configuration *c,
 				vla_ptr(vlabuf, d, ext_compat) + i * 16;
 			INIT_LIST_HEAD(&desc->ext_prop);
 		}
-	ret = ffs_do_os_descs(ffs->ms_os_descs_count,
-			      vla_ptr(vlabuf, d, raw_descs) +
-			      fs_len + hs_len + ss_len,
-			      d_raw_descs__sz - fs_len - hs_len - ss_len,
-			      __ffs_func_bind_do_os_desc, func);
-	if (unlikely(ret < 0))
-		goto error;
+		ret = ffs_do_os_descs(ffs->ms_os_descs_count,
+				      vla_ptr(vlabuf, d, raw_descs) +
+				      fs_len + hs_len + ss_len,
+				      d_raw_descs__sz - fs_len - hs_len -
+				      ss_len,
+				      __ffs_func_bind_do_os_desc, func);
+		if (unlikely(ret < 0))
+			goto error;
+	}
 	func->function.os_desc_n =
 		c->cdev->use_os_string ? ffs->interfaces_count : 0;
 

drivers/usb/gadget/function/f_printer.c

@@ -161,14 +161,6 @@ static struct usb_endpoint_descriptor hs_ep_out_desc = {
 	.wMaxPacketSize =	cpu_to_le16(512)
 };
 
-static struct usb_qualifier_descriptor dev_qualifier = {
-	.bLength =		sizeof(dev_qualifier),
-	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
-	.bcdUSB =		cpu_to_le16(0x0200),
-	.bDeviceClass =		USB_CLASS_PRINTER,
-	.bNumConfigurations =	1
-};
-
 static struct usb_descriptor_header *hs_printer_function[] = {
 	(struct usb_descriptor_header *) &intf_desc,
 	(struct usb_descriptor_header *) &hs_ep_in_desc,

drivers/usb/gadget/function/f_tcm.c

@@ -1445,16 +1445,18 @@ static void usbg_drop_tpg(struct se_portal_group *se_tpg)
 	for (i = 0; i < TPG_INSTANCES; ++i)
 		if (tpg_instances[i].tpg == tpg)
 			break;
-	if (i < TPG_INSTANCES)
+	if (i < TPG_INSTANCES) {
 		tpg_instances[i].tpg = NULL;
-	opts = container_of(tpg_instances[i].func_inst,
-		struct f_tcm_opts, func_inst);
-	mutex_lock(&opts->dep_lock);
-	if (opts->has_dep)
-		module_put(opts->dependent);
-	else
-		configfs_undepend_item_unlocked(&opts->func_inst.group.cg_item);
-	mutex_unlock(&opts->dep_lock);
+		opts = container_of(tpg_instances[i].func_inst,
+			struct f_tcm_opts, func_inst);
+		mutex_lock(&opts->dep_lock);
+		if (opts->has_dep)
+			module_put(opts->dependent);
+		else
+			configfs_undepend_item_unlocked(
+				&opts->func_inst.group.cg_item);
+		mutex_unlock(&opts->dep_lock);
+	}
 	mutex_unlock(&tpg_instances_lock);
 
 	kfree(tpg);

drivers/usb/gadget/function/f_uac2.c

@@ -598,18 +598,6 @@ static struct usb_gadget_strings *fn_strings[] = {
 	NULL,
 };
 
-static struct usb_qualifier_descriptor devqual_desc = {
-	.bLength = sizeof devqual_desc,
-	.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-
-	.bcdUSB = cpu_to_le16(0x200),
-	.bDeviceClass = USB_CLASS_MISC,
-	.bDeviceSubClass = 0x02,
-	.bDeviceProtocol = 0x01,
-	.bNumConfigurations = 1,
-	.bRESERVED = 0,
-};
-
 static struct usb_interface_assoc_descriptor iad_desc = {
 	.bLength = sizeof iad_desc,
 	.bDescriptorType = USB_DT_INTERFACE_ASSOCIATION,
@@ -1292,6 +1280,7 @@ in_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr)
 
 	if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) {
 		struct cntrl_cur_lay3 c;
+		memset(&c, 0, sizeof(struct cntrl_cur_lay3));
 
 		if (entity_id == USB_IN_CLK_ID)
 			c.dCUR = p_srate;

drivers/usb/gadget/function/storage_common.c

@@ -83,9 +83,7 @@ EXPORT_SYMBOL_GPL(fsg_fs_function);
  * USB 2.0 devices need to expose both high speed and full speed
  * descriptors, unless they only run at full speed.
  *
- * That means alternate endpoint descriptors (bigger packets)
- * and a "device qualifier" ... plus more construction options
- * for the configuration descriptor.
+ * That means alternate endpoint descriptors (bigger packets).
  */
 struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,

drivers/usb/gadget/legacy/inode.c

@@ -938,8 +938,11 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 			struct usb_ep		*ep = dev->gadget->ep0;
 			struct usb_request	*req = dev->req;
 
-			if ((retval = setup_req (ep, req, 0)) == 0)
-				retval = usb_ep_queue (ep, req, GFP_ATOMIC);
+			if ((retval = setup_req (ep, req, 0)) == 0) {
+				spin_unlock_irq (&dev->lock);
+				retval = usb_ep_queue (ep, req, GFP_KERNEL);
+				spin_lock_irq (&dev->lock);
+			}
 			dev->state = STATE_DEV_CONNECTED;
 
 			/* assume that was SET_CONFIGURATION */
@@ -1457,8 +1460,11 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 							w_length);
 				if (value < 0)
 					break;
+
+				spin_unlock (&dev->lock);
 				value = usb_ep_queue (gadget->ep0, dev->req,
-							GFP_ATOMIC);
+							GFP_KERNEL);
+				spin_lock (&dev->lock);
 				if (value < 0) {
 					clean_req (gadget->ep0, dev->req);
 					break;
@@ -1481,11 +1487,14 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	if (value >= 0 && dev->state != STATE_DEV_SETUP) {
 		req->length = value;
 		req->zero = value < w_length;
-		value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
+
+		spin_unlock (&dev->lock);
+		value = usb_ep_queue (gadget->ep0, req, GFP_KERNEL);
 		if (value < 0) {
 			DBG (dev, "ep_queue --> %d\n", value);
 			req->status = 0;
 		}
+		return value;
 	}
 
 	/* device stalls when value < 0 */