- 09 Sep, 2020 40 commits
-
-
Damien Le Moal authored
commit 7785a9e4 upstream. Use the DECLARE_CRYPTO_WAIT() macro to properly initialize the crypto wait structures declared on stack before their use with crypto_wait_req(). Fixes: 39d13a1a ("dm crypt: reuse eboiv skcipher for IV generation") Fixes: bbb16584 ("dm crypt: Implement Elephant diffuser for Bitlocker compatibility") Cc: stable@vger.kernel.org Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikulas Patocka authored
commit e27fec66 upstream. The dm-integrity target did not report errors in bitmap mode just after creation. The reason is that the function integrity_recalc didn't clean up ic->recalc_bitmap as it proceeded with recalculation. Fix this by updating the bitmap accordingly -- the double shift serves to rounddown. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Fixes: 468dfca3 ("dm integrity: add a bitmap mode") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by:
-
Mike Snitzer authored
commit c322ee93 upstream. Commit 935fcc56 ("dm mpath: only flush workqueue when needed") changed flush_multipath_work() to avoid needless workqueue flushing (of a multipath global workqueue). But that change didn't realize the surrounding flush_multipath_work() code should also only run if 'pg_init_in_progress' is set. Fix this by only doing all of flush_multipath_work()'s PG init related work if 'pg_init_in_progress' is set. Otherwise multipath_wait_for_pg_init_completion() will run unconditionally but the preceeding flush_workqueue(kmpath_handlerd) may not. This could lead to deadlock (though only if kmpath_handlerd never runs a corresponding work to decrement 'pg_init_in_progress'). It could also be, though highly unlikely, that the kmpath_handlerd work that does PG init completes before 'pg_init_in_progress' is set, and then an intervening DM table reload's multipath_postsuspend() triggers flush_multipath_work(). Fixes: 935fcc56 ("dm mpath: only flush workqueue when needed") Cc: stable@vger.kernel.org Reported-by:
Ben Marzinski <bmarzins@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit f9e040ef upstream. The function dax_direct_access doesn't take partitions into account, it always maps pages from the beginning of the device. Therefore, persistent_memory_claim() must get the partition offset using get_start_sect() and add it to the page offsets passed to dax_direct_access(). Signed-off-by:
-
Sandeep Raghuraman authored
commit f7b2e34b upstream. Starting in Linux 5.8, the graphics and memory clock frequency were not being reported for CIK cards. This is a regression, since they were reported correctly in Linux 5.7. After investigation, I discovered that the smum_send_msg_to_smc() function, attempts to call the corresponding get_argument() function of ci_smu_funcs. However, the get_argument() function is not defined in ci_smu_funcs. This patch fixes the bug by specifying the correct get_argument() function. Fixes: a0ec2256 ("drm/amd/powerplay: unified interfaces for message issuing and response checking") Signed-off-by:
Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Evan Quan authored
commit 971df65c upstream. Normally softwareshutdowntemp should be greater than Thotspotlimit. However, on some VEGA10 ASIC, the softwareshutdowntemp is 91C while Thotspotlimit is 105C. This seems not right and may trigger some false alarms. Signed-off-by:
Evan Quan <evan.quan@amd.com> Acked-by:
-
Sean Paul authored
commit 9ab57658 upstream. This patch fixes a few bugs: 1- We weren't taking into account sha_leftovers when adding multiple ksvs to sha_text. As such, we were or'ing the end of ksv[j - 1] with the beginning of ksv[j] 2- In the sha_leftovers == 2 and sha_leftovers == 3 case, bstatus was being placed on the wrong half of sha_text, overlapping the leftover ksv value 3- In the sha_leftovers == 2 case, we need to manually terminate the byte stream with 0x80 since the hardware doesn't have enough room to add it after writing M0 The upside is that all of the HDCP supported HDMI repeaters I could find on Amazon just strip HDCP anyways, so it turns out to be _really_ hard to hit any of these cases without an MST hub, which is not (yet) supported. Oh, and the sha_leftovers == 1 case works perfectly! Fixes: ee5e5e7a ("drm/i915: Add HDCP framework + base implementation") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.17+ Reviewed-by:
Ramalingam C <ramalingam.c@intel.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Gustavo Pimentel authored
commit 05655541 upstream. Fix the source and destination physical address calculation of a peripheral device on scatter-gather implementation. This issue manifested during tests using a 64 bits architecture system. The abnormal behavior wasn't visible before due to all previous tests were done using 32 bits architecture system, that masked his effect. Fixes: e63d79d1 ("dmaengine: Add Synopsys eDMA IP core driver") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/8d3ab7e2ba96563fe3495b32f60077fffb85307d.1597327623.git.gustavo.pimentel@synopsys.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Tejun Heo authored
commit e11d80a8 upstream. blk-iocost calls blk_stat_enable_accounting() while holding an irqsafe lock which triggers a lockdep splat because q->stats->lock isn't irqsafe. Let's make it irqsafe. Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: cd006509 ("blk-iocost: account for IO size when testing latencies") Cc: stable@vger.kernel.org # v5.8+ Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tejun Heo authored
commit 5aeac7c4 upstream. ioc_pd_free() grabs irq-safe ioc->lock without ensuring that irq is disabled when it can be called with irq disabled or enabled. This has a small chance of causing A-A deadlocks and triggers lockdep splats. Use irqsave operations instead. Signed-off-by:
-
He Zhe authored
commit 91dbd73a upstream. We want neither " include/linux/compiler_attributes.h:201:41: warning: statement will never be executed [-Wswitch-unreachable] 201 | # define fallthrough __attribute__((__fallthrough__)) | ^~~~~~~~~~~~~ " nor " include/linux/compiler_attributes.h:201:41: warning: attribute 'fallthrough' not preceding a case label or default label 201 | # define fallthrough __attribute__((__fallthrough__)) | ^~~~~~~~~~~~~ " It's not worth adding one more macro. Let's simply place the fallthrough in between the expansions. Fixes: c9b02990 ("MIPS: Use fallthrough for arch/mips") Cc: stable@vger.kernel.org Signed-off-by:
He Zhe <zhe.he@windriver.com> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Tejun Heo authored
commit 3b545563 upstream. All three generations of Sandisk SSDs lock up hard intermittently. Experiments showed that disabling NCQ lowered the failure rate significantly and the kernel has been disabling NCQ for some models of SD7's and 8's, which is obviously undesirable. Karthik worked with Sandisk to root cause the hard lockups to trim commands larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which limits max trim size to 128M and applies it to all three generations of Sandisk SSDs. Signed-off-by:
-
Eric Farman authored
commit 114b9df4 upstream. Commit fa686453 ("sched/rt, s390: Use CONFIG_PREEMPTION") changed a bunch of uses of CONFIG_PREEMPT to _PREEMPTION. Except in the Kconfig it used two T's. That's the only place in the system where that spelling exists, so let's fix that. Fixes: fa686453 ("sched/rt, s390: Use CONFIG_PREEMPTION") Cc: <stable@vger.kernel.org> # 5.6 Signed-off-by:
Eric Farman <farman@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Jiufei Xue authored
commit 98dfd502 upstream. Index here is already the position of the file in fixed_file_table, we should not use io_file_from_index() again to get it. Otherwise, the wrong file which still in use may be released unexpectedly. Cc: stable@vger.kernel.org # v5.6 Fixes: 05f3fb3c ("io_uring: avoid ring quiesce for fixed file set unregister and update") Signed-off-by:
Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by:
-
Jiufei Xue authored
commit 95d1c8e5 upstream. While io_sqe_file_register() failed in __io_sqe_files_update(), table->files[i] still point to the original file which may freed soon, and that will trigger use-after-free problems. Cc: stable@vger.kernel.org Fixes: f3bd9dae ("io_uring: fix memleak in __io_sqe_files_update()") Signed-off-by:
-
Jens Axboe authored
commit de1b0ee4 upstream. If a driver leaves the limit settings as the defaults, then we don't initialize bdi->io_pages. This means that file systems may need to work around bdi->io_pages == 0, which is somewhat messy. Initialize the default value just like we do for ->ra_pages. Cc: stable@vger.kernel.org Fixes: 9491ae4a ("mm: don't cap request size based on read-ahead setting") Reported-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Ming Lei authored
commit 7e249690 upstream. Block layer usually doesn't support or allow zero-length bvec. Since commit 1bdc76ae ("iov_iter: use bvec iterator to implement iterate_bvec()"), iterate_bvec() switches to bvec iterator. However, Al mentioned that 'Zero-length segments are not disallowed' in iov_iter. Fixes for_each_bvec() so that it can move on after seeing one zero length bvec. Fixes: 1bdc76ae ("iov_iter: use bvec iterator to implement iterate_bvec()") Reported-by:
syzbot <syzbot+61acc40a49a3e46e25ea@syzkaller.appspotmail.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Tested-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Link: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg2262077.html Signed-off-by:
-
Max Staudt authored
commit d3a84a8d upstream. The basic permission bits (protection bits in AmigaOS) have been broken in Linux' AFFS - it would only set bits, but never delete them. Also, contrary to the documentation, the Archived bit was not handled. Let's fix this for good, and set the bits such that Linux and classic AmigaOS can coexist in the most peaceful manner. Also, update the documentation to represent the current state of things. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by:
Max Staudt <max@enpas.org> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Sean Young authored
commit 4f0835d6 upstream. Only report uevent file contents if device still registered, else we might read freed memory. Reported-by: syzbot+ceef16277388d6f24898@syzkaller.appspotmail.com Cc: Hillf Danton <hdanton@sina.com> Cc: <stable@vger.kernel.org> # 4.16+ Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Sean Young authored
commit a2e2d73f upstream. Device drivers do not expect to have change_protocol or wakeup re-programming to be accesed after rc_unregister_device(). This can cause the device driver to access deallocated resources. Cc: <stable@vger.kernel.org> # 4.16+ Signed-off-by:
-
Adrian Hunter authored
commit df57d732 upstream. For Intel controllers, SDHCI_RESET_ALL resets also CQHCI registers. Normally, SDHCI_RESET_ALL is not used while CQHCI is enabled, but that can happen on the error path. e.g. if mmc_cqe_recovery() fails, mmc_blk_reset() is called which, for a eMMC that does not support HW Reset, will cycle the bus power and the driver will perform SDHCI_RESET_ALL. So whenever performing SDHCI_RESET_ALL ensure CQHCI is deactivated. That will force the driver to reinitialize CQHCI when it is next used. A similar change was done already for sdhci-msm, and other drivers using CQHCI might benefit from a similar change, if they also have CQHCI reset by SDHCI_RESET_ALL. Fixes: 8ee82bda ("mmc: sdhci-pci: Add CQHCI support for Intel GLK") Cc: stable@vger.kernel.org # 5.4.x: 0ffa6cfb : mmc: cqhci: Add cqhci_deactivate() Cc: stable@vger.kernel.org # 5.4+ Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200819121848.16967-1-adrian.hunter@intel.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Wenbin Mei authored
commit 65557383 upstream. Add description for resets/reset-names. Cc: <stable@vger.kernel.org> # v5.4+ Fixes: 966580ad ("mmc: mediatek: add support for MT7622 SoC") Signed-off-by:
Wenbin Mei <wenbin.mei@mediatek.com> Tested-by:
Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20200814014346.6496-2-wenbin.mei@mediatek.com Signed-off-by:
-
Wenbin Mei authored
commit 855d388d upstream. This patch fixs eMMC-Access on mt7622/Bpi-64. Before we got these Errors on mounting eMMC ion R64: [ 48.664925] blk_update_request: I/O error, dev mmcblk0, sector 204800 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 48.676019] Buffer I/O error on dev mmcblk0p1, logical block 0, lost sync page write This patch adds a optional reset management for msdc. Sometimes the bootloader does not bring msdc register to default state, so need reset the msdc controller. Cc: <stable@vger.kernel.org> # v5.4+ Fixes: 966580ad ("mmc: mediatek: add support for MT7622 SoC") Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Tested-by:
-
Wenbin Mei authored
commit d6f6cbee upstream. This commit adds reset node for mmc device. Cc: <stable@vger.kernel.org> # v5.4+ Fixes: 966580ad ("mmc: mediatek: add support for MT7622 SoC") Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200814014346.6496-3-wenbin.mei@mediatek.com Signed-off-by:
-
Takashi Iwai authored
commit 6a6660d0 upstream. There've been quite a few regression reports about the lowered volume (reduced to ca 65% from the previous level) on Lenovo Thinkpad X1 after the commit d2cd795c ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen"). Although the commit itself does the right thing from HD-audio POV in order to have a volume control for bass speakers, it seems that the machine has some secret recipe under the hood. Through experiments, Benjamin Poirier found out that the following routing gives the best result: * DAC1 (NID 0x02) -> Speaker pin (NID 0x14) * DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) & Headphone pin (0x21) * DAC3 (NID 0x06) -> Unused DAC1 seems to have some equalizer internally applied, and you'd get again the output in a bad quality if you connect this to the headphone pin. Hence the headphone is connected to DAC2, which is now shared with the bass speaker pin. DAC3 has no volume amp, hence it's not connected at all. For achieving the routing above, this patch introduced a couple of workarounds: * The connection list of bass speaker pin (NID 0x17) is reduced not to include DAC3 (NID 0x06) * Pass preferred_pairs array to specify the fixed connection Here, both workarounds are needed because the generic parser prefers the individual DAC assignment over others. When the routing above is applied, the generic parser creates the two volume controls "Front" and "Bass Speaker". Since we have only two DACs for three output pins, those are not fully controlling each output individually, and it would confuse PulseAudio. For avoiding the pitfall, in this patch, we rename those volume controls to some unique ones ("DAC1" and "DAC2"). Then PulseAudio ignore them and concentrate only on the still good-working "Master" volume control. If a user still wants to control each DAC volume, they can still change manually via "DAC1" and "DAC2" volume controls. Fixes: d2cd795c ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen") Reported-by:
Benjamin Poirier <benjamin.poirier@gmail.com> Reviewed-by:
Jaroslav Kysela <perex@perex.cz> Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Adrien Crivelli authored
commit 8bcea6cb upstream. The Galaxy Book Ion NT950XCJ-X716A (15 inches) uses the same ALC298 codec as other Samsung laptops which have the no headphone sound bug. I confirmed on my own hardware that this fixes the bug. This also correct the model name for the 13 inches version. It was incorrectly referenced as NT950XCJ-X716A in commit e17f02d0. But it should have been NP930XCJ-K01US. Fixes: e17f02d0 ("ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423 Signed-off-by:
Adrien Crivelli <adrien.crivelli@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826084014.211217-1-adrien.crivelli@gmail.com Signed-off-by:
-
Takashi Sakamoto authored
commit 0bd8bce8 upstream. Tascam FE-8 is known to support communication by asynchronous transaction only. The support can be implemented in userspace application and snd-firewire-ctl-services project has the support. However, ALSA firewire-tascam driver is bound to the model. This commit changes device entries so that the model is excluded. In a commit 53b3ffee ("ALSA: firewire-tascam: change device probing processing"), I addressed to the concern that version field in configuration differs depending on installed firmware. However, as long as I checked, the version number is fixed. It's safe to return version number back to modalias. Fixes: 53b3ffee ("ALSA: firewire-tascam: change device probing processing") Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200823075537.56255-1-o-takashi@sakamocchi.jp Signed-off-by:
-
Dan Crawford authored
commit 15cbff3f upstream. Following Christian Lachner's patch for Gigabyte X570-based motherboards, also patch the MSI X570-A PRO motherboard; the ALC1220 codec requires the same workaround for Clevo laptops to enforce the DAC/mixer connection path. Set up a quirk entry for that. I suspect most if all X570 motherboards will require similar patches. [ The entries reordered in the SSID order -- tiwai ] Related buglink: https://bugzilla.kernel.org/show_bug.cgi?id=205275 Signed-off-by:
Dan Crawford <dnlcrwfrd@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200829024946.5691-1-dnlcrwfrd@gmail.com Signed-off-by:
-
Takashi Sakamoto authored
commit acd46a6b upstream. Avid Adrenaline is reported that ALSA firewire-digi00x driver is bound to. However, as long as he investigated, the design of this model is hardly similar to the one of Digi 00x family. It's better to exclude the model from modalias of ALSA firewire-digi00x driver. This commit changes device entries so that the model is excluded. $ python3 crpp < ~/git/am-config-rom/misc/avid-adrenaline.img ROM header and bus information block ----------------------------------------------------------------- 400 04203a9c bus_info_length 4, crc_length 32, crc 15004 404 31333934 bus_name "1394" 408 e064a002 irmc 1, cmc 1, isc 1, bmc 0, cyc_clk_acc 100, max_rec 10 (2048) 40c 00a07e01 company_id 00a07e | 410 00085257 device_id 0100085257 | EUI-64 00a07e0100085257 root directory ----------------------------------------------------------------- 414 0005d08c directory_length 5, crc 53388 418 0300a07e vendor 41c 8100000c --> descriptor leaf at 44c 420 0c008380 node capabilities 424 8d000002 --> eui-64 leaf at 42c 428 d1000004 --> unit directory at 438 eui-64 leaf at 42c ----------------------------------------------------------------- 42c 0002410f leaf_length 2, crc 16655 430 00a07e01 company_id 00a07e | 434 00085257 device_id 0100085257 | EUI-64 00a07e0100085257 unit directory at 438 ----------------------------------------------------------------- 438 0004d6c9 directory_length 4, crc 54985 43c 1200a02d specifier id: 1394 TA 440 13014001 version: Vender Unique and AV/C 444 17000001 model 448 81000009 --> descriptor leaf at 46c descriptor leaf at 44c ----------------------------------------------------------------- 44c 00077205 leaf_length 7, crc 29189 450 00000000 textual descriptor 454 00000000 minimal ASCII 458 41766964 "Avid" 45c 20546563 " Tec" 460 686e6f6c "hnol" 464 6f677900 "ogy" 468 00000000 descriptor leaf at 46c ----------------------------------------------------------------- 46c 000599a5 leaf_length 5, crc 39333 470 00000000 textual descriptor 474 00000000 minimal ASCII 478 41647265 "Adre" 47c 6e616c69 "nali" 480 6e650000 "ne" Reported-by:
Simon Wood <simon@mungewell.org> Fixes: 9edf723f ("ALSA: firewire-digi00x: add skeleton for Digi 002/003 family") Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by:
-
Kai Vehmanen authored
commit 858e0ad9 upstream. When system is suspended with active audio playback to HDMI/DP, two alternative sequences can happen at resume: a) monitor is detected first and ALSA prepare follows normal stream setup sequence, or b) ALSA prepare is called first, but monitor is not yet detected, so PCM is restarted without a pin, In case of (b), on i915 systems, haswell_verify_D0() is not called at resume and the pin power state may be incorrect. Result is lack of audio after resume with no error reported back to user-space. Fix the problem by always verifying converter and pin state in the i915_pin_cvt_fixup(). BugLink: https://github.com/thesofproject/linux/issues/2388 Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826170306.701566-1-kai.vehmanen@linux.intel.com Signed-off-by:
-
Takashi Iwai authored
commit 949a1ebe upstream. The PCM OSS mulaw plugin has a check of the format of the counter part whether it's a linear format. The check is with snd_BUG_ON() that emits WARN_ON() when the debug config is set, and it confuses syzkaller as if it were a serious issue. Let's drop snd_BUG_ON() for avoiding that. While we're at it, correct the error code to a more suitable, EINVAL. Reported-by: syzbot+23b22dc2e0b81cbfcc95@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200901131802.18157-1-tiwai@suse.de Signed-off-by:
-
Joshua Sivec authored
commit 7c5b892e upstream. This uses the same quirk as the Motu and SSL2 devices. Tested on the UR22C. Fixes bug 208851. Signed-off-by:
Joshua Sivec <sivec@posteo.net> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208851 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200825165515.8239-1-sivec@posteo.net Signed-off-by:
-
František Kučera authored
commit 14335d8b upstream. This patch extends support for DJM-250MK2 and allows recording. However, DVS is not possible yet (see the comment in code). Signed-off-by:
František Kučera <franta-linux@frantovo.cz> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200825153113.6352-1-konference@frantovo.cz Signed-off-by:
-
Tong Zhang authored
commit ee0761d1 upstream. snd_ca0106_spi_write() returns 1 on error, snd_ca0106_pcm_power_dac() is returning the error code directly, and the caller is expecting an negative error code Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200824224541.1260307-1-ztong0001@gmail.com Signed-off-by:
-
Tiezhu Yang authored
commit eed8f88b upstream. This reverts commit 61eee4a7 ("ALSA: hda: Add support for Loongson 7A1000 controller") to fix the following error on the Loongson LS7A platform: rcu: INFO: rcu_preempt self-detected stall on CPU <SNIP> NMI backtrace for cpu 0 CPU: 0 PID: 68 Comm: kworker/0:2 Not tainted 5.8.0+ #3 Hardware name: , BIOS Workqueue: events azx_probe_work [snd_hda_intel] <SNIP> Call Trace: [<ffffffff80211a64>] show_stack+0x9c/0x130 [<ffffffff8065a740>] dump_stack+0xb0/0xf0 [<ffffffff80665774>] nmi_cpu_backtrace+0x134/0x140 [<ffffffff80665910>] nmi_trigger_cpumask_backtrace+0x190/0x200 [<ffffffff802b1abc>] rcu_dump_cpu_stacks+0x12c/0x190 [<ffffffff802b08cc>] rcu_sched_clock_irq+0xa2c/0xfc8 [<ffffffff802b91d4>] update_process_times+0x2c/0xb8 [<ffffffff802cad80>] tick_sched_timer+0x40/0xb8 [<ffffffff802ba5f0>] __hrtimer_run_queues+0x118/0x1d0 [<ffffffff802bab74>] hrtimer_interrupt+0x12c/0x2d8 [<ffffffff8021547c>] c0_compare_interrupt+0x74/0xa0 [<ffffffff80296bd0>] __handle_irq_event_percpu+0xa8/0x198 [<ffffffff80296cf0>] handle_irq_event_percpu+0x30/0x90 [<ffffffff8029d958>] handle_percpu_irq+0x88/0xb8 [<ffffffff80296124>] generic_handle_irq+0x44/0x60 [<ffffffff80b3cfd0>] do_IRQ+0x18/0x28 [<ffffffff8067ace4>] plat_irq_dispatch+0x64/0x100 [<ffffffff80209a20>] handle_int+0x140/0x14c [<ffffffff802402e8>] irq_exit+0xf8/0x100 Because AZX_DRIVER_GENERIC can not work well for Loongson LS7A HDA controller, it needs some workarounds which are not merged into the upstream kernel at this time, so it should revert this patch now. Fixes: 61eee4a7 ("ALSA: hda: Add support for Loongson 7A1000 controller") Cc: <stable@vger.kernel.org> # 5.9-rc1+ Signed-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/r/1598348388-2518-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 4819e15f ] One can not simply remove vmalloc faulting on x86-32. Upstream commit: 7f0a002b ("x86/mm: remove vmalloc faulting") removed it on x86 alltogether because previously the arch_sync_kernel_mappings() interface was introduced. This interface added synchronization of vmalloc/ioremap page-table updates to all page-tables in the system at creation time and was thought to make vmalloc faulting obsolete. But that assumption was incredibly naive. It turned out that there is a race window between the time the vmalloc or ioremap code establishes a mapping and the time it synchronizes this change to other page-tables in the system. During this race window another CPU or thread can establish a vmalloc mapping which uses the same intermediate page-table entries (e.g. PMD or PUD) and does no synchronization in the end, because it found all necessary mappings already present in the kernel reference page-table. But when these intermediate page-table entries are not yet synchronized, the other CPU or thread will continue with a vmalloc address that is not yet mapped in the page-table it currently uses, causing an unhandled page fault and oops like below: BUG: unable to handle page fault for address: fe80c000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 33183067 *pte = a8648163 Oops: 0002 [#1] SMP CPU: 1 PID: 13514 Comm: cve-2017-17053 Tainted: G ... Call Trace: ldt_dup_context+0x66/0x80 dup_mm+0x2b3/0x480 copy_process+0x133b/0x15c0 _do_fork+0x94/0x3e0 __ia32_sys_clone+0x67/0x80 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7eef549 So the arch_sync_kernel_mappings() interface is racy, but removing it would mean to re-introduce the vmalloc_sync_all() interface, which is even more awful. Keep arch_sync_kernel_mappings() in place and catch the race condition in the page-fault handler instead. Do a partial revert of above commit to get vmalloc faulting on x86-32 back in place. Fixes: 7f0a002b ("x86/mm: remove vmalloc faulting") Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200902155904.17544-1-joro@8bytes.org [sl: revert 7f0a002b instead to restore vmalloc faulting for x86-64] Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Max Chou authored
[ Upstream commit 24b06572 ] The original return is NOTIFY_STOP, but notifier_call_chain would stop the future call for register_pm_notifier even registered on other Kernel modules with the same priority which value is zero. Signed-off-by:
Max Chou <max.chou@realtek.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Qu Wenruo authored
commit f96d6960 upstream. The error message for inode transid is the same as for inode generation, which makes us unable to detect the real problem. Reported-by:
Tyler Richmond <t.d.richmond@gmail.com> Fixes: 496245ca ("btrfs: tree-checker: Verify inode item") CC: stable@vger.kernel.org # 5.4+ Reviewed-by:
Marcos Paulo de Souza <mpdesouza@suse.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
-
Marcos Paulo de Souza authored
commit e3e39c72 upstream. [BUG] After commit 9afc6649 ("btrfs: block-group: refactor how we read one block group item"), cache->length is being assigned after calling btrfs_create_block_group_cache. This causes a problem since set_free_space_tree_thresholds calculates the free-space threshold to decide if the free-space tree should convert from extents to bitmaps. The current code calls set_free_space_tree_thresholds with cache->length being 0, which then makes cache->bitmap_high_thresh zero. This implies the system will always use bitmap instead of extents, which is not desired if the block group is not fragmented. This behavior can be seen by a test that expects to repair systems with FREE_SPACE_EXTENT and FREE_SPACE_BITMAP, but the current code only created FREE_SPACE_BITMAP. [FIX] Call set_free_space_tree_thresholds after setting cache->length. There is now a WARN_ON in set_free_space_tree_thresholds to help preventing the same mistake to happen again in the future. Link: https://github.com/kdave/btrfs-progs/issues/251 Fixes: 9afc6649 ("btrfs: block-group: refactor how we read one block group item") CC: stable@vger.kernel.org # 5.8+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Josef Bacik authored
commit d3beaa25 upstream. These are special extent buffers that get rewound in order to lookup the state of the tree at a specific point in time. As such they do not go through the normal initialization paths that set their lockdep class, so handle them appropriately when they are created and before they are locked. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
-
