- 17 Oct, 2020 1 commit
-
-
Luiz Augusto von Dentz authored
commit eddb7732 upstream. This fixes various places where a stack variable is used uninitialized. Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 14 Oct, 2020 39 commits
-
-
Greg Kroah-Hartman authored
Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20201012132629.585664421@linuxfoundation.org Signed-off-by:
-
Anant Thazhemadam authored
commit f45a4248 upstream. When get_registers() fails in set_ethernet_addr(),the uninitialized value of node_id gets copied over as the address. So, check the return value of get_registers(). If get_registers() executed successfully (i.e., it returns sizeof(node_id)), copy over the MAC address using ether_addr_copy() (instead of using memcpy()). Else, if get_registers() failed instead, a randomly generated MAC address is set as the MAC address instead. Reported-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com Tested-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com Acked-by:
Petko Manolov <petkan@nucleusys.com> Signed-off-by:
Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Vijay Balakrishna authored
commit 4aab2be0 upstream. When memory is hotplug added or removed the min_free_kbytes should be recalculated based on what is expected by khugepaged. Currently after hotplug, min_free_kbytes will be set to a lower default and higher default set when THP enabled is lost. This change restores min_free_kbytes as expected for THP consumers. [vijayb@linux.microsoft.com: v5] Link: https://lkml.kernel.org/r/1601398153-5517-1-git-send-email-vijayb@linux.microsoft.com Fixes: f000565a ("thp: set recommended min free kbytes") Signed-off-by:
Vijay Balakrishna <vijayb@linux.microsoft.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Allen Pais <apais@microsoft.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Song Liu <songliubraving@fb.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/1600305709-2319-2-git-send-email-vijayb@linux.microsoft.com Link: https://lkml.kernel.org/r/1600204258-13683-1-git-send-email-vijayb@linux.microsoft.com Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Kajol Jain authored
[ Upstream commit 6d6b8b9f ] The error handling introduced by commit: 2ed6edd3 ("perf: Add cond_resched() to task_function_call()") looses any return value from smp_call_function_single() that is not {0, -EINVAL}. This is a problem because it will return -EXNIO when the target CPU is offline. Worse, in that case it'll turn into an infinite loop. Fixes: 2ed6edd3 ("perf: Add cond_resched() to task_function_call()") Reported-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
Kajol Jain <kjain@linux.ibm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
Barret Rhoden <brho@google.com> Tested-by:
Sasha Levin <sashal@kernel.org>
-
David Howells authored
[ Upstream commit 38b1dc47 ] If someone calls setsockopt() twice to set a server key keyring, the first keyring is leaked. Fix it to return an error instead if the server key keyring is already set. Fixes: 17926a79 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
[ Upstream commit fa1d113a ] conn->state_lock may be taken in softirq mode, but a previous patch replaced an outer lock in the response-packet event handling code, and lost the _bh from that when doing so. Fix this by applying the _bh annotation to the state_lock locking. Fixes: a1399f8b ("rxrpc: Call channels should have separate call number spaces") Signed-off-by:
-
David Howells authored
[ Upstream commit 9a059cd5 ] If rxrpc_read() (which allows KEYCTL_READ to read a key), sees a token of a type it doesn't recognise, it can BUG in a couple of places, which is unnecessary as it can easily get back to userspace. Fix this to print an error message instead. Fixes: 99455153 ("RxRPC: Parse security index 5 keys (Kerberos 5)") Signed-off-by:
-
Marc Dionne authored
[ Upstream commit 56305118 ] The session key should be encoded with just the 8 data bytes and no length; ENCODE_DATA precedes it with a 4 byte length, which confuses some existing tools that try to parse this format. Add an ENCODE_BYTES macro that does not include a length, and use it for the key. Also adjust the expected length. Note that commit 774521f3 ("rxrpc: Fix an assertion in rxrpc_read()") had fixed a BUG by changing the length rather than fixing the encoding. The original length was correct. Fixes: 99455153 ("RxRPC: Parse security index 5 keys (Kerberos 5)") Signed-off-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 7dbbcf49 ] Fix build error by selecting MDIO_DEVRES for MDIO_THUNDER. Fixes this build error: ld: drivers/net/phy/mdio-thunder.o: in function `thunder_mdiobus_pci_probe': drivers/net/phy/mdio-thunder.c:78: undefined reference to `devm_mdiobus_alloc_size' Fixes: 379d7ac7 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: netdev@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit f32f1933 ] syzbot managed to crash a host by creating a bond with a GRE device. For non Ethernet device, bonding calls bond_setup_by_slave() instead of ether_setup(), and unfortunately dev->needed_headroom was not copied from the new added member. [ 171.243095] skbuff: skb_under_panic: text:ffffffffa184b9ea len:116 put:20 head:ffff883f84012dc0 data:ffff883f84012dbc tail:0x70 end:0xd00 dev:bond0 [ 171.243111] ------------[ cut here ]------------ [ 171.243112] kernel BUG at net/core/skbuff.c:112! [ 171.243117] invalid opcode: 0000 [#1] SMP KASAN PTI [ 171.243469] gsmi: Log Shutdown Reason 0x03 [ 171.243505] Call Trace: [ 171.243506] <IRQ> [ 171.243512] [<ffffffffa171be59>] skb_push+0x49/0x50 [ 171.243516] [<ffffffffa184b9ea>] ipgre_header+0x2a/0xf0 [ 171.243520] [<ffffffffa17452d7>] neigh_connected_output+0xb7/0x100 [ 171.243524] [<ffffffffa186f1d3>] ip6_finish_output2+0x383/0x490 [ 171.243528] [<ffffffffa186ede2>] __ip6_finish_output+0xa2/0x110 [ 171.243531] [<ffffffffa186acbc>] ip6_finish_output+0x2c/0xa0 [ 171.243534] [<ffffffffa186abe9>] ip6_output+0x69/0x110 [ 171.243537] [<ffffffffa186ac90>] ? ip6_output+0x110/0x110 [ 171.243541] [<ffffffffa189d952>] mld_sendpack+0x1b2/0x2d0 [ 171.243544] [<ffffffffa189d290>] ? mld_send_report+0xf0/0xf0 [ 171.243548] [<ffffffffa189c797>] mld_ifc_timer_expire+0x2d7/0x3b0 [ 171.243551] [<ffffffffa189c4c0>] ? mld_gq_timer_expire+0x50/0x50 [ 171.243556] [<ffffffffa0fea270>] call_timer_fn+0x30/0x130 [ 171.243559] [<ffffffffa0fea17c>] expire_timers+0x4c/0x110 [ 171.243563] [<ffffffffa0fea0e3>] __run_timers+0x213/0x260 [ 171.243566] [<ffffffffa0fecb7d>] ? ktime_get+0x3d/0xa0 [ 171.243570] [<ffffffffa0ff9c4e>] ? clockevents_program_event+0x7e/0xe0 [ 171.243574] [<ffffffffa0f7e5d5>] ? sched_clock_cpu+0x15/0x190 [ 171.243577] [<ffffffffa0fe973d>] run_timer_softirq+0x1d/0x40 [ 171.243581] [<ffffffffa1c00152>] __do_softirq+0x152/0x2f0 [ 171.243585] [<ffffffffa0f44e1f>] irq_exit+0x9f/0xb0 [ 171.243588] [<ffffffffa1a02e1d>] smp_apic_timer_interrupt+0xfd/0x1a0 [ 171.243591] [<ffffffffa1a01ea6>] apic_timer_interrupt+0x86/0x90 Fixes: f5184d26 ("net: Allow netdevices to specify needed head/tailroom") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit e94ee171 ] The struct flowi must never be interpreted by itself as its size depends on the address family. Therefore it must always be grouped with its original family value. In this particular instance, the original family value is lost in the function xfrm_state_find. Therefore we get a bogus read when it's coupled with the wrong family which would occur with inter- family xfrm states. This patch fixes it by keeping the original family value. Note that the same bug could potentially occur in LSM through the xfrm_state_pol_flow_match hook. I checked the current code there and it seems to be safe for now as only secid is used which is part of struct flowi_common. But that API should be changed so that so that we don't get new bugs in the future. We could do that by replacing fl with just secid or adding a family field. Reported-by: syzbot+577fbac3145a6eb2e7a5@syzkaller.appspotmail.com Fixes: 48b8d783 ("[XFRM]: State selection update to use inner...") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Voon Weifeng authored
[ Upstream commit 7241c5a6 ] EEE should be only be enabled during stmmac_mac_link_up() when the link are up and being set up properly. set_eee should only do settings configuration and disabling the eee. Without this fix, turning on EEE using ethtool will return "Operation not supported". This is due to the driver is in a dead loop waiting for eee to be advertised in the for eee to be activated but the driver will only configure the EEE advertisement after the eee is activated. Ethtool should only return "Operation not supported" if there is no EEE capbility in the MAC controller. Fixes: 8a7493e5 ("net: stmmac: Fix a race in EEE enable callback") Signed-off-by:
Voon Weifeng <weifeng.voon@intel.com> Acked-by:
Mark Gross <mgross@linux.intel.com> Signed-off-by:
-
Antony Antony authored
[ Upstream commit 8366685b ] When we clone state only add_time was cloned. It missed values like bytes, packets. Now clone the all members of the structure. v1->v3: - use memcpy to copy the entire structure Fixes: 80c9abaa ("[XFRM]: Extension for dynamic update of endpoint address(es)") Signed-off-by:
Antony Antony <antony.antony@secunet.com> Signed-off-by:
-
Antony Antony authored
[ Upstream commit 91a46c6d ] XFRMA_REPLAY_ESN_VAL was not cloned completely from the old to the new. Migrate this attribute during XFRMA_MSG_MIGRATE v1->v2: - move curleft cloning to a separate patch Fixes: af2f464e ("xfrm: Assign esn pointers when cloning a state") Signed-off-by:
-
Philip Yang authored
[ Upstream commit 1d0e16ac ] Set ttm->sg to NULL after kfree, to avoid memory corruption backtrace: [ 420.932812] kernel BUG at /build/linux-do9eLF/linux-4.15.0/mm/slub.c:295! [ 420.934182] invalid opcode: 0000 [#1] SMP NOPTI [ 420.935445] Modules linked in: xt_conntrack ipt_MASQUERADE [ 420.951332] Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 1.5.4 07/09/2020 [ 420.952887] RIP: 0010:__slab_free+0x180/0x2d0 [ 420.954419] RSP: 0018:ffffbe426291fa60 EFLAGS: 00010246 [ 420.955963] RAX: ffff9e29263e9c30 RBX: ffff9e29263e9c30 RCX: 000000018100004b [ 420.957512] RDX: ffff9e29263e9c30 RSI: fffff3d33e98fa40 RDI: ffff9e297e407a80 [ 420.959055] RBP: ffffbe426291fb00 R08: 0000000000000001 R09: ffffffffc0d39ade [ 420.960587] R10: ffffbe426291fb20 R11: ffff9e49ffdd4000 R12: ffff9e297e407a80 [ 420.962105] R13: fffff3d33e98fa40 R14: ffff9e29263e9c30 R15: ffff9e2954464fd8 [ 420.963611] FS: 00007fa2ea097780(0000) GS:ffff9e297e840000(0000) knlGS:0000000000000000 [ 420.965144] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 420.966663] CR2: 00007f16bfffefb8 CR3: 0000001ff0c62000 CR4: 0000000000340ee0 [ 420.968193] Call Trace: [ 420.969703] ? __page_cache_release+0x3c/0x220 [ 420.971294] ? amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.972789] kfree+0x168/0x180 [ 420.974353] ? amdgpu_ttm_tt_set_user_pages+0x64/0xc0 [amdgpu] [ 420.975850] ? kfree+0x168/0x180 [ 420.977403] amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.978888] ttm_tt_unpopulate.part.10+0x53/0x60 [amdttm] [ 420.980357] ttm_tt_destroy.part.11+0x4f/0x60 [amdttm] [ 420.981814] ttm_tt_destroy+0x13/0x20 [amdttm] [ 420.983273] ttm_bo_cleanup_memtype_use+0x36/0x80 [amdttm] [ 420.984725] ttm_bo_release+0x1c9/0x360 [amdttm] [ 420.986167] amdttm_bo_put+0x24/0x30 [amdttm] [ 420.987663] amdgpu_bo_unref+0x1e/0x30 [amdgpu] [ 420.989165] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x9ca/0xb10 [amdgpu] [ 420.990666] kfd_ioctl_alloc_memory_of_gpu+0xef/0x2c0 [amdgpu] Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Dumitru Ceara authored
commit 8aa7b526 upstream. With multiple DNAT rules it's possible that after destination translation the resulting tuples collide. For example, two openvswitch flows: nw_dst=10.0.0.10,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20)) nw_dst=10.0.0.20,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20)) Assuming two TCP clients initiating the following connections: 10.0.0.10:5000->10.0.0.10:10 10.0.0.10:5000->10.0.0.20:10 Both tuples would translate to 10.0.0.10:5000->20.0.0.1:20 causing nf_conntrack_confirm() to fail because of tuple collision. Netfilter handles this case by allocating a null binding for SNAT at egress by default. Perform the same operation in openvswitch for DNAT if no explicit SNAT is requested by the user and allocate a null binding for SNAT for packets in the "original" direction. Reported-at: https://bugzilla.redhat.com/1877128 Suggested-by:
Florian Westphal <fw@strlen.de> Fixes: 05752523 ("openvswitch: Interface with NAT.") Signed-off-by:
Dumitru Ceara <dceara@redhat.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Anant Thazhemadam authored
commit 9a9e7749 upstream. The variable "i" isn't initialized back correctly after the first loop under the label inst_rollback gets executed. The value of "i" is assigned to be option_count - 1, and the ensuing loop (under alloc_rollback) begins by initializing i--. Thus, the value of i when the loop begins execution will now become i = option_count - 2. Thus, when kfree(dst_opts[i]) is called in the second loop in this order, (i.e., inst_rollback followed by alloc_rollback), dst_optsp[option_count - 2] is the first element freed, and dst_opts[option_count - 1] does not get freed, and thus, a memory leak is caused. This memory leak can be fixed, by assigning i = option_count (instead of option_count - 1). Fixes: 80f7c668 ("team: add support for per-port options") Reported-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Tested-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Signed-off-by:
-
Eric Dumazet authored
commit 89d01748 upstream. Some devices set needed_headroom. If we ignore it, we might end up crashing in various skb_push() for example in ipgre_header() since some layers assume enough headroom has been reserved. Fixes: 1d76efe1 ("team: add support for non-ethernet devices") Signed-off-by:
-
Eric Dumazet authored
commit d42ee76e upstream. After freeing ep->auth_hmacs we have to clear the pointer or risk use-after-free as reported by syzbot: BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] BUG: KASAN: use-after-free in sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 Read of size 8 at addr ffff8880a8ff52c0 by task syz-executor941/6874 CPU: 0 PID: 6874 Comm: syz-executor941 Not tainted 5.9.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 sctp_endpoint_destroy+0x95/0x240 net/sctp/endpointola.c:203 sctp_endpoint_put net/sctp/endpointola.c:236 [inline] sctp_endpoint_free+0xd6/0x110 net/sctp/endpointola.c:183 sctp_destroy_sock+0x9c/0x3c0 net/sctp/socket.c:4981 sctp_v6_destroy_sock+0x11/0x20 net/sctp/socket.c:9415 sk_common_release+0x64/0x390 net/core/sock.c:3254 sctp_close+0x4ce/0x8b0 net/sctp/socket.c:1533 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:475 __sock_release+0xcd/0x280 net/socket.c:596 sock_close+0x18/0x20 net/socket.c:1277 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0xb7d/0x29f0 kernel/exit.c:806 do_group_exit+0x125/0x310 kernel/exit.c:903 __do_sys_exit_group kernel/exit.c:914 [inline] __se_sys_exit_group kernel/exit.c:912 [inline] __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:912 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x43f278 Code: Bad RIP value. RSP: 002b:00007fffe0995c38 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043f278 RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 RBP: 00000000004bf068 R08: 00000000000000e7 R09: ffffffffffffffd0 R10: 0000000020000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 kmem_cache_alloc_trace+0x174/0x300 mm/slab.c:3554 kmalloc include/linux/slab.h:554 [inline] kmalloc_array include/linux/slab.h:593 [inline] kcalloc include/linux/slab.h:605 [inline] sctp_auth_init_hmacs+0xdb/0x3b0 net/sctp/auth.c:464 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3422 [inline] kfree+0x10e/0x2b0 mm/slab.c:3760 sctp_auth_destroy_hmacs net/sctp/auth.c:511 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_init_hmacs net/sctp/auth.c:496 [inline] sctp_auth_init_hmacs+0x2b7/0x3b0 net/sctp/auth.c:454 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1f485649 ("[SCTP]: Implement SCTP-AUTH internals") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Hugh Dickins authored
commit 033b5d77 upstream. There have been elusive reports of filemap_fault() hitting its VM_BUG_ON_PAGE(page_to_pgoff(page) != offset, page) on kernels built with CONFIG_READ_ONLY_THP_FOR_FS=y. Suren has hit it on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y and CONFIG_NUMA is not set: and he has analyzed it down to how khugepaged without NUMA reuses the same huge page after collapse_file() failed (whereas NUMA targets its allocation to the respective node each time). And most of us were usually testing with CONFIG_NUMA=y kernels. collapse_file(old start) new_page = khugepaged_alloc_page(hpage) __SetPageLocked(new_page) new_page->index = start // hpage->index=old offset new_page->mapping = mapping xas_store(&xas, new_page) filemap_fault page = find_get_page(mapping, offset) // if offset falls inside hpage then // compound_head(page) == hpage lock_page_maybe_drop_mmap() __lock_page(page) // collapse fails xas_store(&xas, old page) new_page->mapping = NULL unlock_page(new_page) collapse_file(new start) new_page = khugepaged_alloc_page(hpage) __SetPageLocked(new_page) new_page->index = start // hpage->index=new offset new_page->mapping = mapping // mapping becomes valid again // since compound_head(page) == hpage // page_to_pgoff(page) got changed VM_BUG_ON_PAGE(page_to_pgoff(page) != offset) An initial patch replaced __SetPageLocked() by lock_page(), which did fix the race which Suren illustrates above. But testing showed that it's not good enough: if the racing task's __lock_page() gets delayed long after its find_get_page(), then it may follow collapse_file(new start)'s successful final unlock_page(), and crash on the same VM_BUG_ON_PAGE. It could be fixed by relaxing filemap_fault()'s VM_BUG_ON_PAGE to a check and retry (as is done for mapping), with similar relaxations in find_lock_entry() and pagecache_get_page(): but it's not obvious what else might get caught out; and khugepaged non-NUMA appears to be unique in exposing a page to page cache, then revoking, without going through a full cycle of freeing before reuse. Instead, non-NUMA khugepaged_prealloc_page() release the old page if anyone else has a reference to it (1% of cases when I tested). Although never reported on huge tmpfs, I believe its find_lock_entry() has been at similar risk; but huge tmpfs does not rely on khugepaged for its normal working nearly so much as READ_ONLY_THP_FOR_FS does. Reported-by:
Denis Lisov <dennis.lissov@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206569 Link: https://lore.kernel.org/linux-mm/?q=20200219144635.3b7417145de19b65f258c943%40linux-foundation.org Reported-by:
Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/linux-xfs/?q=20200616013309.GB815%40lca.pw Reported-and-analyzed-by:
Suren Baghdasaryan <surenb@google.com> Fixes: 87c460a0 ("mm/khugepaged: collapse_shmem() without freezing new_page") Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # v4.9+ Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
Eric Dumazet authored
commit c7cc9200 upstream. De-referencing skb after call to gro_cells_receive() is not allowed. We need to fetch skb->len earlier. Fixes: 5491e7c6 ("macsec: enable GRO and RPS on macsec devices") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit b40341fa upstream. The first thing that the ftrace function callback helper functions should do is to check for recursion. Peter Zijlstra found that when "rcu_is_watching()" had its notrace removed, it caused perf function tracing to crash. This is because the call of rcu_is_watching() is tested before function recursion is checked and and if it is traced, it will cause an infinite recursion loop. rcu_is_watching() should still stay notrace, but to prevent this should never had crashed in the first place. The recursion prevention must be the first thing done in callback functions. Link: https://lore.kernel.org/r/20200929112541.GM2628@hirez.programming.kicks-ass.net Cc: stable@vger.kernel.org Cc: Paul McKenney <paulmck@kernel.org> Fixes: c68c0fa2 ("ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too") Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Miquel Raynal authored
commit 3d84515f upstream. nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. Fixes: 1fef62c1 ("mtd: nand: add sunxi NAND flash controller support") Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-54-miquel.raynal@bootlin.com [iwamatsu: adjust filename] Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Tommi Rantala authored
commit 29b4f5f1 upstream. Since glibc 2.28 when running 'perf top --stdio', input handling no longer works, but hitting any key always just prints the "Mapped keys" help text. To fix it, call clearerr() in the display_thread() loop to clear any EOF sticky errors, as instructed in the glibc NEWS file (https://sourceware.org/git/?p=glibc.git;a=blob;f=NEWS ): * All stdio functions now treat end-of-file as a sticky condition. If you read from a file until EOF, and then the file is enlarged by another process, you must call clearerr or another function with the same effect (e.g. fseek, rewind) before you can read the additional data. This corrects a longstanding C99 conformance bug. It is most likely to affect programs that use stdio to read interactive input from a terminal. (Bug #1190.) Signed-off-by:
Tommi Rantala <tommi.t.rantala@nokia.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat....
-
Tetsuo Handa authored
commit b292b50b upstream. syzbot is reporting hung task in wait_for_device_probe() [1]. At least, we always need to decrement probe_count if we incremented probe_count in really_probe(). However, since I can't find "Resources present before probing" message in the console log, both "this message simply flowed off" and "syzbot is not hitting this path" will be possible. Therefore, while we are at it, let's also prepare for concurrent wait_for_device_probe() calls by replacing wake_up() with wake_up_all(). [1] https://syzkaller.appspot.com/bug?id=25c833f1983c9c1d512f4ff860dd0d7f5a2e2c0f Reported-by:
syzbot <syzbot+805f5f6ae37411f15b64@syzkaller.appspotmail.com> Fixes: 7c35e699 ("driver core: Print device when resources present in really_probe()") Cc: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20200713021254.3444-1-penguin-kernel@I-love.SAKURA.ne.jp [iwamatsu: Drop patch for deferred_probe_timeout_work_func()] Signed-off-by:
-
Aaron Ma authored
commit 720ef73d upstream. Evaluating ACPI _BCL could fail, then ACPI buffer size will be set to 0. When reuse this ACPI buffer, AE_BUFFER_OVERFLOW will be triggered. Re-initialize buffer size will make ACPI evaluate successfully. Fixes: 46445b6b ("thinkpad-acpi: fix handle locate for video and query of _BCL") Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Tom Rix authored
commit 5f38b06d upstream. clang static analysis flags this represenative problem thinkpad_acpi.c:2523:7: warning: Branch condition evaluates to a garbage value if (!oldn->mute || ^~~~~~~~~~~ In hotkey_kthread() mute is conditionally set by hotkey_read_nvram() but unconditionally checked by hotkey_compare_and_issue_event(). So the tp_nvram_state variable s[2] needs to be initialized. Fixes: 01e88f25 ("ACPI: thinkpad-acpi: add CMOS NVRAM polling for hot keys (v9)") Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
-
Linus Torvalds authored
commit 4013c149 upstream. Kernel threads intentionally do CLONE_FS in order to follow any changes that 'init' does to set up the root directory (or cwd). It is admittedly a bit odd, but it avoids the situation where 'init' does some extensive setup to initialize the system environment, and then we execute a usermode helper program, and it uses the original FS setup from boot time that may be very limited and incomplete. [ Both Al Viro and Eric Biederman point out that 'pivot_root()' will follow the root regardless, since it fixes up other users of root (see chroot_fs_refs() for details), but overmounting root and doing a chroot() would not. ] However, Vegard Nossum noticed that the CLONE_FS not only means that we follow the root and current working directories, it also means we share umask with whatever init changed it to. That wasn't intentional. Just reset umask to the original default (0022) before actually starting the usermode helper program. Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Anant Thazhemadam authored
commit 3dc289f8 upstream. In nl80211_parse_key(), key.idx is first initialized as -1. If this value of key.idx remains unmodified and gets returned, and nl80211_key_allowed() also returns 0, then rdev_del_key() gets called with key.idx = -1. This causes an out-of-bounds array access. Handle this issue by checking if the value of key.idx after nl80211_parse_key() is called and return -EINVAL if key.idx < 0. Cc: stable@vger.kernel.org Reported-by: syzbot+b1bb342d1d097516cbda@syzkaller.appspotmail.com Tested-by: syzbot+b1bb342d1d097516cbda@syzkaller.appspotmail.com Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Peilin Ye authored
commit 5af08640 upstream. fbcon_get_font() is reading out-of-bounds. A malicious user may resize `vc->vc_font.height` to a large value, causing fbcon_get_font() to read out of `fontdata`. fbcon_get_font() handles both built-in and user-provided fonts. Fortunately, recently we have added FONT_EXTRA_WORDS support for built-in fonts, so fix it by adding range checks using FNTSIZE(). This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS macros into linux/font.h", and patch "Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts". Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+29d4ed7f3bdedf2aa2fd@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfd Signed-off-by:
Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/b34544687a1a09d6de630659eb7a773f4953238b.1600953813.git.yepeilin.cs@gmail.com Signed-off-by:
-
Geert Uytterhoeven authored
commit 77972b55 upstream. This reverts commit 1838d6c6. This commit moved the ravb_mdio_init() call (and thus the of_mdiobus_register() call) from the ravb_probe() to the ravb_open() call. This causes a regression during system resume (s2idle/s2ram), as new PHY devices cannot be bound while suspended. During boot, the Micrel PHY is detected like this: Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=228) ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off During system suspend, (A) defer_all_probes is set to true, and (B) usermodehelper_disabled is set to UMH_DISABLED, to avoid drivers being probed while suspended. A. If CONFIG_MODULES=n, phy_device_register() calling device_add() merely adds the device, but does not probe it yet, as really_probe() returns early due to defer_all_probes being set: dpm_resume+0x128/0x4f8 device_resume+0xcc/0x1b0 dpm_run_callback+0x74/0x340 ravb_resume+0x190/0x1b8 ravb_open+0x84/0x770 of_mdiobus_register+0x1e0/0x468 of_mdiobus_register_phy+0x1b8/0x250 of_mdiobus_phy_device_register+0x178/0x1e8 phy_device_register+0x114/0x1b8 device_add+0x3d4/0x798 bus_probe_device+0x98/0xa0 device_initial_probe+0x10/0x18 __device_attach+0xe4/0x140 bus_for_each_drv+0x64/0xc8 __device_attach_driver+0xb8/0xe0 driver_probe_device.part.11+0xc4/0xd8 really_probe+0x32c/0x3b8 Later, phy_attach_direct() notices no PHY driver has been bound, and falls back to the Generic PHY, leading to degraded operation: Generic PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=POLL) ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off B. If CONFIG_MODULES=y, request_module() returns early with -EBUSY due to UMH_DISABLED, and MDIO initialization fails completely: mdio_bus e6800000.ethernet-ffffffff:00: error -16 loading PHY driver module for ID 0x00221622 ravb e6800000.ethernet eth0: failed to initialize MDIO PM: dpm_run_callback(): ravb_resume+0x0/0x1b8 returns -16 PM: Device e6800000.ethernet failed to resume: error -16 Ignoring -EBUSY in phy_request_driver_module(), like was done for -ENOENT in commit 21e19442 ("net: phy: fix issue with loading PHY driver w/o initramfs"), would makes it fall back to the Generic PHY, like in the CONFIG_MODULES=n case. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by:
-
Peilin Ye authored
commit 6735b463 upstream. syzbot has reported an issue in the framebuffer layer, where a malicious user may overflow our built-in font data buffers. In order to perform a reliable range check, subsystems need to know `FONTDATAMAX` for each built-in font. Unfortunately, our font descriptor, `struct console_font` does not contain `FONTDATAMAX`, and is part of the UAPI, making it infeasible to modify it. For user-provided fonts, the framebuffer layer resolves this issue by reserving four extra words at the beginning of data buffers. Later, whenever a function needs to access them, it simply uses the following macros: Recently we have gathered all the above macros to <linux/font.h>. Let us do the same thing for built-in fonts, prepend four extra words (including `FONTDATAMAX`) to their data buffers, so that subsystems can use these macros for all fonts, no matter built-in or user-provided. This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS macros into linux/font.h". Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfd Signed-off-by:
-
Peilin Ye authored
commit bb0890b4 upstream. drivers/video/console/newport_con.c is borrowing FONT_EXTRA_WORDS macros from drivers/video/fbdev/core/fbcon.h. To keep things simple, move all definitions into <linux/font.h>. Since newport_con now uses four extra words, initialize the fourth word in newport_set_font() properly. Cc: stable@vger.kernel.org Signed-off-by:
-
Will McVicker authored
commit 1cc5ef91 upstream. The indexes to the nf_nat_l[34]protos arrays come from userspace. So check the tuple's family, e.g. l3num, when creating the conntrack in order to prevent an OOB memory access during setup. Here is an example kernel panic on 4.14.180 when userspace passes in an index greater than NFPROTO_NUMPROTO. Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in:... Process poc (pid: 5614, stack limit = 0x00000000a3933121) CPU: 4 PID: 5614 Comm: poc Tainted: G S W O 4.14.180-g051355490483 Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM task: 000000002a3dfffe task.stack: 00000000a3933121 pc : __cfi_check_fail+0x1c/0x24 lr : __cfi_check_fail+0x1c/0x24 ... Call trace: __cfi_check_fail+0x1c/0x24 name_to_dev_t+0x0/0x468 nfnetlink_parse_nat_setup+0x234/0x258 ctnetlink_parse_nat_setup+0x4c/0x228 ctnetlink_new_conntrack+0x590/0xc40 nfnetlink_rcv_msg+0x31c/0x4d4 netlink_rcv_skb+0x100/0x184 nfnetlink_rcv+0xf4/0x180 netlink_unicast+0x360/0x770 netlink_sendmsg+0x5a0/0x6a4 ___sys_sendmsg+0x314/0x46c SyS_sendmsg+0xb4/0x108 el0_svc_naked+0x34/0x38 This crash is not happening since 5.4+, however, ctnetlink still allows for creating entries with unsupported layer 3 protocol number. Fixes: c1d10adb ("[NETFILTER]: Add ctnetlink port for nf_conntrack") Signed-off-by:
Will McVicker <willmcvicker@google.com> [pablo@netfilter.org: rebased original patch on top of nf.git] Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Al Viro authored
commit 3701cb59 upstream. or get freed, for that matter, if it's a long (separately stored) name. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit fe0a916c upstream. Checking for the lack of epitems refering to the epoll we want to insert into is not enough; we might have an insertion of that epoll into another one that has already collected the set of files to recheck for excessive reverse paths, but hasn't gotten to creating/inserting the epitem for it. However, any such insertion in progress can be detected - it will update the generation count in our epoll when it's done looking through it for files to check. That gets done under ->mtx of our epoll and that allows us to detect that safely. We are *not* holding epmutex here, so the generation count is not stable. However, since both the update of ep->gen by loop check and (later) insertion into ->f_ep_link are done with ep->mtx held, we are fine - the sequence is grab epmutex bump loop_check_gen ... grab tep->mtx // 1 tep->gen = loop_check_gen ... drop tep->mtx // 2 ... grab tep->mtx // 3 ... insert into ->f_ep_link ... drop tep->mtx // 4 bump loop_check_gen drop epmutex and if the fastpath check in another thread happens for that eventpoll, it can come * before (1) - in that case fastpath is just fine * after (4) - we'll see non-empty ->f_ep_link, slow path taken * between (2) and (3) - loop_check_gen is stable, with ->mtx providing barriers and we end up taking slow path. Note that ->f_ep_link emptiness check is slightly racy - we are protected against insertions into that list, but removals can happen right under us. Not a problem - in the worst case we'll end up taking a slow path for no good reason. Signed-off-by:
-
Al Viro authored
commit 18306c40 upstream. removes the need to clear it, along with the races. Signed-off-by:
-
Al Viro authored
commit f8d4f44d upstream. Signed-off-by:
-
Or Cohen authored
commit acf69c94 upstream. Using tp_reserve to calculate netoff can overflow as tp_reserve is unsigned int and netoff is unsigned short. This may lead to macoff receving a smaller value then sizeof(struct virtio_net_hdr), and if po->has_vnet_hdr is set, an out-of-bounds write will occur when calling virtio_net_hdr_from_skb. The bug is fixed by converting netoff to unsigned int and checking if it exceeds USHRT_MAX. This addresses CVE-2020-14386 Fixes: 8913336a ("packet: add PACKET_RESERVE sockopt") Signed-off-by:
Or Cohen <orcohen@paloaltonetworks.com> Signed-off-by:
Stefan Nuernberger <snu@amazon.com> CC: David Woodhouse <dwmw@amazon.co.uk> CC: Amit Shah <aams@amazon.com> CC: stable@vger.kernel.org Signed-off-by:
-
