- 17 Jan, 2021 40 commits
-
-
Dan Carpenter authored
commit f6bcb4c7 upstream. This code will leak "map->debugfs_name" because the if statement is reversed so it only frees NULL pointers instead of non-NULL. In fact the if statement is not required and should just be removed because kfree() accepts NULL pointers. Fixes: cffa4b21 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X/RQpfAwRdLg0GqQ@mwanda Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vasily Averin authored
commit 54970a2f upstream. syzbot reproduces BUG_ON in skb_checksum_help(): tun creates (bogus) skb with huge partial-checksummed area and small ip packet inside. Then ip_rcv trims the skb based on size of internal ip packet, after that csum offset points beyond of trimmed skb. Then checksum_tg() called via netfilter hook triggers BUG_ON: offset = skb_checksum_start_offset(skb); BUG_ON(offset >= skb_headlen(skb)); To work around the problem this patch forces pskb_trim_rcsum_slow() to return -EINVAL in described scenario. It allows its callers to drop such kind of packets. Link: https://syzkaller.appspot.com/bug?id=b419a5ca95062664fe1a60b764621eb4526e2cd0 Reported-by: syzbot+7010af67ced6105e5ab6@syzkaller.appspotmail.com Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Acked-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/1b2494af-2c56-8ee2-7bc0-923fcad1cdf8@virtuozzo.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Ming Lei authored
commit aebf5db9 upstream. Make sure that bdgrab() is done on the 'block_device' instance before referring to it for avoiding use-after-free. Cc: <stable@vger.kernel.org> Reported-by: syzbot+825f0f9657d4e528046e@syzkaller.appspotmail.com Signed-off-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Marc Zyngier authored
commit 2a5f1b67 upstream. We reset the guest's view of PMCR_EL0 unconditionally, based on the host's view of this register. It is however legal for an implementation not to provide any PMU, resulting in an UNDEF. The obvious fix is to skip the reset of this shadow register when no PMU is available, sidestepping the issue entirely. If no PMU is available, the guest is not able to request a virtual PMU anyway, so not doing nothing is the right thing to do! It is unlikely that this bug can hit any HW implementation though, as they all provide a PMU. It has been found using nested virt with the host KVM not implementing the PMU itself. Fixes: ab946834 ("arm64: KVM: Add access handler for PMCR register") Reviewed-by:
Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201210083059.1277162-1-maz@kernel.org Signed-off-by:
-
Arnd Bergmann authored
commit 69931e11 upstream. Without this, the driver runs into a link failure arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_ds26522_probe': slic_ds26522.c:(.text+0x100c): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: slic_ds26522.c:(.text+0x1cdc): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_write': slic_ds26522.c:(.text+0x1e4c): undefined reference to `byte_rev_table' Fixes: c37d4a00 ("Maxim/driver: Add driver for maxim ds26522") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Xiaolei Wang authored
commit cffa4b21 upstream. After initializing the regmap through syscon_regmap_lookup_by_compatible, then regmap_attach_dev to the device, because the debugfs_name has been allocated, there is no need to redistribute it again unreferenced object 0xd8399b80 (size 64): comm "swapper/0", pid 1, jiffies 4294937641 (age 278.590s) hex dump (first 32 bytes): 64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72 dummy-iomuxc-gpr 40 32 30 65 34 30 30 30 00 7f 52 5b d8 7e 42 69 @20e4000..R[.~Bi backtrace: [<ca384d6f>] kasprintf+0x2c/0x54 [<6ad3bbc2>] regmap_debugfs_init+0xdc/0x2fc [<bc4181da>] __regmap_init+0xc38/0xd88 [<1f7e0609>] of_syscon_register+0x168/0x294 [<735e8766>] device_node_get_regmap+0x6c/0x98 [<d96c8982>] imx6ul_init_machine+0x20/0x88 [<0456565b>] customize_machine+0x1c/0x30 [<d07393d8>] do_one_initcall+0x80/0x3ac [<7e584867>] kernel_init_freeable+0x170/0x1f0 [<80074741>] kernel_init+0x8/0x120 [<285d6f28>] ret_from_fork+0x14/0x20 [<00000000>] 0x0 Fixes: 9b947a13 ("regmap: use debugfs even when no device") Signed-off-by:
Xiaolei Wang <xiaolei.wang@windriver.com> Link: https://lore.kernel.org/r/20201229105046.41984-1-xiaolei.wang@windriver.com Signed-off-by:
-
Dinghao Liu authored
commit 7a6eb072 upstream. mlx5e_create_ttc_table_groups() frees ft->g on failure of kvzalloc(), but such failure will be caught by its caller in mlx5e_create_ttc_table() and ft->g will be freed again in mlx5e_destroy_flow_table(). The same issue also occurs in mlx5e_create_ttc_table_groups(). Set ft->g to NULL after kfree() to avoid double free. Fixes: 7b3722fa ("net/mlx5e: Support RSS for GRE tunneled packets") Fixes: 33cfaaa8 ("net/mlx5e: Split the main flow steering table") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Dinghao Liu authored
commit 5b0bb12c upstream. When mlx5_create_flow_group() fails, ft->g should be freed just like when kvzalloc() fails. The caller of mlx5e_create_l2_table_groups() does not catch this issue on failure, which leads to memleak. Fixes: 33cfaaa8 ("net/mlx5e: Split the main flow steering table") Signed-off-by:
-
Dinghao Liu authored
commit ff2b46d7 upstream. When irq_domain_get_irq_data() or irqd_cfg() fails at i == 0, data allocated by kzalloc() has not been freed before returning, which leads to memleak. Fixes: b106ee63 ("irq_remapping/vt-d: Enhance Intel IR driver to support hierarchical irqdomains") Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210105051837.32118-1-dinghao.liu@zju.edu.cn Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 19cd3403 upstream. Without CRC32 support, this fails to link: arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_init': pblk-init.c:(.text+0x2654): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_exit': pblk-init.c:(.text+0x2a7c): undefined reference to `crc32_le' Fixes: a4bd217b ("lightnvm: physical block device (pblk) target") Signed-off-by:
-
Arnd Bergmann authored
commit 36a106a4 upstream. Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/block/rsxx/config.o: in function `rsxx_load_config': config.c:(.text+0x124): undefined reference to `crc32_le' Fixes: 8722ff8c ("block: IBM RamSan 70/80 device driver") Signed-off-by:
-
Arnd Bergmann authored
commit e186620d upstream. Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify': fw.c:(.text+0x74c): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow Fixes: 151a9706 ("wil6210: firmware download") Signed-off-by:
-
Shravya Kumbham authored
commit 2d5efea6 upstream. Typecast the fls(width -1) with (enum dmaengine_alignment) in xilinx_dma_chan_probe function to fix the coverity warning. Addresses-Coverity: Event mixed_enum_type. Fixes: 9cd4360d ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by:
Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-4-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Shravya Kumbham authored
commit faeb0731 upstream. In xilinx_dma_child_probe function, the nr_channels variable is passed to of_property_read_u32() which expects an u32 return value pointer. Modify the nr_channels variable type from int to u32 to fix the incompatible parameter coverity warning. Addresses-Coverity: Event incompatible_param. Fixes: 1a9e7a03 ("dmaengine: vdma: Add support for mulit-channel dma mode") Signed-off-by:
-
Shravya Kumbham authored
commit 99974aed upstream. dma_async_device_register() can return non-zero error code. Add condition to check the return value of dma_async_device_register function and handle the error path. Addresses-Coverity: Event check_return. Fixes: 9cd4360d ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by:
-
Christophe JAILLET authored
dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the error handling path of the probe function commit 33cbd54d upstream. 'mtk_hsdma_hw_deinit()' should be called in the error handling path of the probe function to undo a previous 'mtk_hsdma_hw_init()' call, as already done in the remove function. Fixes: 548c4597 ("dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and MT7623 SoC") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201219124718.182664-1-christophe.jaillet@wanadoo.fr Signed-off-by:
-
Roman Guskov authored
commit a590370d upstream. if cur_bpw <= 8 and xfer_len < 4 then the value of fthlv will be 1 and SPI registers content may have been lost. * If SPI data register is accessed as a 16-bit register and DSIZE <= 8bit, better to select FTHLV = 2, 4, 6 etc * If SPI data register is accessed as a 32-bit register and DSIZE > 8bit, better to select FTHLV = 2, 4, 6 etc, while if DSIZE <= 8bit, better to select FTHLV = 4, 8, 12 etc Signed-off-by:
Roman Guskov <rguskov@dh-electronics.com> Fixes: dcbe0d84 ("spi: add driver for STM32 SPI controller") Reviewed-by:
Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20201221123532.27272-1-rguskov@dh-electronics.com Signed-off-by:
-
Colin Ian King authored
commit 943bdd0c upstream. Currently there is an unlikely case where cpufreq_cpu_get() returns a NULL policy and this will cause a NULL pointer dereference later on. Fix this by passing the policy to transition_frequency_fidvid() from the caller and hence eliminating the need for the cpufreq_cpu_get() and cpufreq_cpu_put(). Thanks to Viresh Kumar for suggesting the fix. Addresses-Coverity: ("Dereference null return") Fixes: b43a7ffb ("cpufreq: Notify all policy->cpus in cpufreq_notify_transition()") Suggested-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Chunyan Zhang authored
commit 0b884fe7 upstream. If the i2c device SCL bus being pulled up due to some exception before message transfer done, the system cannot receive the completing interrupt signal any more, it would not exit waiting loop until MAX_SCHEDULE_TIMEOUT jiffies eclipse, that would make the system seemed hang up. To avoid that happen, this patch adds a specific timeout for message transfer. Fixes: 8b9ec071 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by:
Linhua Xu <linhua.xu@unisoc.com> Signed-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> [wsa: changed errno to ETIMEDOUT] Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Andreas Kemnade authored
commit ec76c2ee upstream. On the GTA04A5 od->_driver_status was not set to BUS_NOTIFY_BIND_DRIVER during probe of the second mmc used for wifi. Therefore omap_device_late_idle idled the device during probing causing oopses when accessing the registers. It was not set because od->_state was set to OMAP_DEVICE_STATE_IDLE in the notifier callback. Therefore set od->_driver_status also in that case. This came apparent after commit 21b2cec6 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") causing this oops: omap_hsmmc 480b4000.mmc: omap_device_late_idle: enabled but no driver. Idling 8<--- cut here --- Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0b402c ... (omap_hsmmc_set_bus_width) from [<c07996bc>] (omap_hsmmc_set_ios+0x11c/0x258) (omap_hsmmc_set_ios) from [<c077b2b0>] (mmc_power_up.part.8+0x3c/0xd0) (mmc_power_up.part.8) from [<c077c14c>] (mmc_start_host+0x88/0x9c) (mmc_start_host) from [<c077d284>] (mmc_add_host+0x58/0x84) (mmc_add_host) from [<c0799190>] (omap_hsmmc_probe+0x5fc/0x8c0) (omap_hsmmc_probe) from [<c0666728>] (platform_drv_probe+0x48/0x98) (platform_drv_probe) from [<c066457c>] (really_probe+0x1dc/0x3b4) Fixes: 04abaf07 ("ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer") Fixes: 21b2cec6 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> [tony@atomide.com: left out extra parens, trimmed description stack trace] Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Ping Cheng authored
commit 37309f47 upstream. As reported by syzbot below, kfifo_alloc'd memory would not be freed if a non-zero return value is triggered in wacom_probe. This patch creates and uses devm_kfifo_alloc to allocate and free itself. BUG: memory leak unreferenced object 0xffff88810dc44a00 (size 512): comm "kworker/1:2", pid 3674, jiffies 4294943617 (age 14.100s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000023e1afac>] kmalloc_array include/linux/slab.h:592 [inline] [<0000000023e1afac>] __kfifo_alloc+0xad/0x100 lib/kfifo.c:43 [<00000000c477f737>] wacom_probe+0x1a1/0x3b0 drivers/hid/wacom_sys.c:2727 [<00000000b3109aca>] hid_device_probe+0x16b/0x210 drivers/hid/hid-core.c:2281 [<00000000aff7c640>] really_probe+0x159/0x480 drivers/base/dd.c:554 [<00000000778d0bc3>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738 [<000000005108dbb5>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844 [<00000000efb7c59e>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 [<0000000024ab1590>] __device_attach+0x122/0x250 drivers/base/dd.c:912 [<000000004c7ac048>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491 [<00000000b93050a3>] device_add+0x5ac/0xc30 drivers/base/core.c:2936 [<00000000e5b46ea5>] hid_add_device+0x151/0x390 drivers/hid/hid-core.c:2437 [<00000000c6add147>] usbhid_probe+0x412/0x560 drivers/hid/usbhid/hid-core.c:1407 [<00000000c33acdb4>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<00000000aff7c640>] really_probe+0x159/0x480 drivers/base/dd.c:554 [<00000000778d0bc3>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738 [<000000005108dbb5>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844 https://syzkaller.appspot.com/bug?extid=5b49c9695968d7250a26 Reported-by: syzbot+5b49c9695968d7250a26@syzkaller.appspotmail.com Signed-off-by:
Ping Cheng <ping.cheng@wacom.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Lorenzo Bianconi authored
commit 3f9bce7a upstream If we are using edge IRQs, new samples can arrive while processing current interrupt since there are no hw guarantees the irq line stays "low" long enough to properly detect the new interrupt. In this case the new sample will be missed. Polling FIFO status register in st_lsm6dsx_handler_thread routine allow us to read new samples even if the interrupt arrives while processing previous data and the timeslot where the line is "low" is too short to be properly detected. Fixes: 89ca88a7 ("iio: imu: st_lsm6dsx: support active-low interrupts") Fixes: 290a6ce1 ("iio: imu: add support to lsm6dsx driver") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/5e93cda7dc1e665f5685c53ad8e9ea71dbae782d.1605378871.git.lorenzo@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> [sudip: manual backport to old irq handler path] Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Sean Nyekjaer authored
commit ec76d918 upstream No need for using reverse logic in the irq return, fix this by flip things around. Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Signed-off-by:
-
Lukas Wunner authored
commit 5626308b upstream pxa2xx_spi_remove() accesses the driver's private data after calling spi_unregister_controller() even though that function releases the last reference on the spi_controller and thereby frees the private data. Fix by switching over to the new devm_spi_alloc_master/slave() helper which keeps the private data accessible until the driver has unbound. Fixes: 32e5b572 ("spi: pxa2xx: Fix controller unregister order") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: <stable@vger.kernel.org> # v2.6.17+: 5e844cc3: spi: Introduce device-managed SPI controller allocation Cc: <stable@vger.kernel.org> # v2.6.17+: 32e5b572: spi: pxa2xx: Fix controller unregister order Cc: <stable@vger.kernel.org> # v2.6.17+ Link: https://lore.kernel.org/r/5764b04d4a6e43069ebb7808f64c2f774ac6f193.1607286887.git.lukas@wunner.de Signed-off-by:
-
Chris Wilson authored
commit 0e53656a upstream When inserting a VMA, we restrict the placement to the low 4G unless the caller opts into using the full range. This was done to allow usersapce the opportunity to transition slowly from a 32b address space, and to avoid breaking inherent 32b assumptions of some commands. However, for insert we limited ourselves to 4G-4K, but on verification we allowed the full 4G. This causes some attempts to bind a new buffer to sporadically fail with -ENOSPC, but at other times be bound successfully. commit 48ea1e32 ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page") suggests that there is a genuine problem with stateless addressing that cannot utilize the last page in 4G and so we purposefully excluded it. This means that the quick pin pass may cause us to utilize a buggy placement. Reported-by:
CQ Tang <cq.tang@intel.com> Testcase: igt/gem_exec_params/larger-than-life-batch Fixes: 48ea1e32 ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: CQ Tang <cq.tang@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v4.5+ Link: https://patchwork.freedesktop.org/patch/msgid/20201216092951.7124-1-chris@chris-wilson.co.uk (cherry picked from commit 5f22cc0b ) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> [sudip: use file from old path] Signed-off-by:
-
Nick Desaulniers authored
commit eff8728f upstream. Basically, consider .text.{hot|unlikely|unknown}.* part of .text, too. When compiling with profiling information (collected via PGO instrumentations or AutoFDO sampling), Clang will separate code into .text.hot, .text.unlikely, or .text.unknown sections based on profiling information. After D79600 (clang-11), these sections will have a trailing `.` suffix, ie. .text.hot., .text.unlikely., .text.unknown.. When using -ffunction-sections together with profiling infomation, either explicitly (FGKASLR) or implicitly (LTO), code may be placed in sections following the convention: .text.hot.<foo>, .text.unlikely.<bar>, .text.unknown.<baz> where <foo>, <bar>, and <baz> are functions. (This produces one section per function; we generally try to merge these all back via linker script so that we don't have 50k sections). For the above cases, we need to teach our linker scripts that such sections might exist and that we'd explicitly like them grouped together, otherwise we can wind up with code outside of the _stext/_etext boundaries that might not be mapped properly for some architectures, resulting in boot failures. If the linker script is not told about possible input sections, then where the section is placed as output is a heuristic-laiden mess that's non-portable between linkers (ie. BFD and LLD), and has resulted in many hard to debug bugs. Kees Cook is working on cleaning this up by adding --orphan-handling=warn linker flag used in ARCH=powerpc to additional architectures. In the case of linker scripts, borrowing from the Zen of Python: explicit is better than implicit. Also, ld.bfd's internal linker script considers .text.hot AND .text.hot.* to be part of .text, as well as .text.unlikely and .text.unlikely.*. I didn't see support for .text.unknown.*, and didn't see Clang producing such code in our kernel builds, but I see code in LLVM that can produce such section names if profiling information is missing. That may point to a larger issue with generating or collecting profiles, but I would much rather be safe and explicit than have to debug yet another issue related to orphan section placement. Reported-by:
Jian Cai <jiancai@google.com> Suggested-by:
Fāng-ruì Sòng <maskray@google.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Tested-by:
Luis Lozano <llozano@google.com> Tested-by:
Manoj Gupta <manojgupta@google.com> Acked-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Fenghua Yu authored
commit a0195f31 upstream Shakeel Butt reported in [1] that a user can request a task to be moved to a resource group even if the task is already in the group. It just wastes time to do the move operation which could be costly to send IPI to a different CPU. Add a sanity check to ensure that the move operation only happens when the task is not already in the resource group. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/ Backporting notes: Since upstream commit fa7d9493 ("x86/resctrl: Rename and move rdt files to a separate directory"), the file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c has been renamed and moved to arch/x86/kernel/cpu/resctrl/rdtgroup.c. Apply the change against file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c for older stable trees. Fixes: e02737d5 ("x86/intel_rdt: Add tasks files") Reported-by:
Shakeel Butt <shakeelb@google.com> Signed-off-by:
Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/962ede65d8e95be793cb61102cca37f7bb018e66.1608243147.git.reinette.chatre@intel.com Signed-off-by:
-
Fenghua Yu authored
commit ae28d1aa upstream Currently, when moving a task to a resource group the PQR_ASSOC MSR is updated with the new closid and rmid in an added task callback. If the task is running, the work is run as soon as possible. If the task is not running, the work is executed later in the kernel exit path when the kernel returns to the task again. Updating the PQR_ASSOC MSR as soon as possible on the CPU a moved task is running is the right thing to do. Queueing work for a task that is not running is unnecessary (the PQR_ASSOC MSR is already updated when the task is scheduled in) and causing system resource waste with the way in which it is implemented: Work to update the PQR_ASSOC register is queued every time the user writes a task id to the "tasks" file, even if the task already belongs to the resource group. This could result in multiple pending work items associated with a single task even if they are all identical and even though only a single update with most recent values is needed. Specifically, even if a task is moved between different resource groups while it is sleeping then it is only the last move that is relevant but yet a work item is queued during each move. This unnecessary queueing of work items could result in significant system resource waste, especially on tasks sleeping for a long time. For example, as demonstrated by Shakeel Butt in [1] writing the same task id to the "tasks" file can quickly consume significant memory. The same problem (wasted system resources) occurs when moving a task between different resource groups. As pointed out by Valentin Schneider in [2] there is an additional issue with the way in which the queueing of work is done in that the task_struct update is currently done after the work is queued, resulting in a race with the register update possibly done before the data needed by the update is available. To solve these issues, update the PQR_ASSOC MSR in a synchronous way right after the new closid and rmid are ready during the task movement, only if the task is running. If a moved task is not running nothing is done since the PQR_ASSOC MSR will be updated next time the task is scheduled. This is the same way used to update the register when tasks are moved as part of resource group removal. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/ [2] https://lore.kernel.org/lkml/20201123022433.17905-1-valentin.schneider@arm.com [ bp: Massage commit message and drop the two update_task_closid_rmid() variants. ] Backporting notes: Since upstream commit fa7d9493 ("x86/resctrl: Rename and move rdt files to a separate directory"), the file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c has been renamed and moved to arch/x86/kernel/cpu/resctrl/rdtgroup.c. Apply the change against file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c for older stable trees. Since upstream commit 352940ec ("x86/resctrl: Rename the RDT functions and definitions"), resctrl functions received more generic names. Specifically related to this backport, intel_rdt_sched_in() was renamed to rescrl_sched_in(). Fixes: e02737d5 ("x86/intel_rdt: Add tasks files") Reported-by:
Valentin Schneider <valentin.schneider@arm.com> Signed-off-by:
James Morse <james.morse@arm.com> Reviewed-by:
-
Ayush Sawal authored
[ Upstream commit 15ef6b0e ] CPL_ABORT_RPL is sent after releasing the resources by calling chtls_release_resources(sk); and chtls_conn_done(sk); eventually causing kernel panic. Fixing it by calling release in appropriate order. Fixes: cc35c88a ("crypto : chtls - CPL handler definition") Signed-off-by:
Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by:
Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by:
-
Ayush Sawal authored
[ Upstream commit eade1e0a ] In case of server removal lookup_stid() may return NULL pointer, which is used as listen_ctx. So added a check before accessing this pointer. Fixes: cc35c88a ("crypto : chtls - CPL handler definition") Signed-off-by:
-
Ayush Sawal authored
[ Upstream commit a84b2c0d ] The skb is unlinked twice, one in __skb_dequeue in function chtls_reset_synq() and another in cleanup_syn_rcv_conn(). So in this patch using skb_peek() instead of __skb_dequeue(), so that unlink will be handled only in cleanup_syn_rcv_conn(). Fixes: cc35c88a ("crypto : chtls - CPL handler definition") Signed-off-by:
-
Ayush Sawal authored
[ Upstream commit 5a5fac99 ] If route to peer is not configured, we might get non tls devices from dst_neigh_lookup() which is invalid, adding a check to avoid it. Fixes: cc35c88a ("crypto : chtls - CPL handler definition") Signed-off-by:
Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by:
-
Ayush Sawal authored
[ Upstream commit 827d3291 ] At the time of SYN_RECV, connection information is not initialized at FW, updating tcb flag over uninitialized connection causes adapter crash. We don't need to update the flag during SYN_RECV state, so avoid this. Fixes: cc35c88a ("crypto : chtls - CPL handler definition") Signed-off-by:
-
Ayush Sawal authored
[ Upstream commit 717df0f4 ] send_abort_rpl() is not calculating cpl_abort_req_rss offset and ends up sending wrong TID with abort_rpl WR causng tid leaks. Replaced send_abort_rpl() with chtls_send_abort_rpl() as it is redundant. Fixes: cc35c88a ("crypto : chtls - CPL handler definition") Signed-off-by:
-
Sean Tranchetti authored
[ Upstream commit d8f5c296 ] Route removal is handled by two code paths. The main removal path is via fib6_del_route() which will handle purging any PMTU exceptions from the cache, removing all per-cpu copies of the DST entry used by the route, and releasing the fib6_info struct. The second removal location is during fib6_add_rt2node() during a route replacement operation. This path also calls fib6_purge_rt() to handle cleaning up the per-cpu copies of the DST entries and releasing the fib6_info associated with the older route, but it does not flush any PMTU exceptions that the older route had. Since the older route is removed from the tree during the replacement, we lose any way of accessing it again. As these lingering DSTs and the fib6_info struct are holding references to the underlying netdevice struct as well, unregistering that device from the kernel can never complete. Fixes: 2b760fcf ("ipv6: hook up exception table to store dst cache") Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/1609892546-11389-1-git-send-email-stranche@quicinc.com Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 50c66167 ] For some reason ip_tunnel insist on setting the DF bit anyway when the inner header has the DF bit set, EVEN if the tunnel was configured with 'nopmtudisc'. This means that the script added in the previous commit cannot be made to work by adding the 'nopmtudisc' flag to the ip tunnel configuration. Doing so breaks connectivity even for the without-conntrack/netfilter scenario. When nopmtudisc is set, the tunnel will skip the mtu check, so no icmp error is sent to client. Then, because inner header has DF set, the outer header gets added with DF bit set as well. IP stack then sends an error to itself because the packet exceeds the device MTU. Fixes: 23a3647b ("ip_tunnels: Use skb-len to PMTU check.") Cc: Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit bb4cc1a1 ] Conntrack reassembly records the largest fragment size seen in IPCB. However, when this gets forwarded/transmitted, fragmentation will only be forced if one of the fragmented packets had the DF bit set. In that case, a flag in IPCB will force fragmentation even if the MTU is large enough. This should work fine, but this breaks with ip tunnels. Consider client that sends a UDP datagram of size X to another host. The client fragments the datagram, so two packets, of size y and z, are sent. DF bit is not set on any of these packets. Middlebox netfilter reassembles those packets back to single size-X packet, before routing decision. packet-size-vs-mtu checks in ip_forward are irrelevant, because DF bit isn't set. At output time, ip refragmentation is skipped as well because x is still smaller than the mtu of the output device. If ttransmit device is an ip tunnel, the packet size increases to x+overhead. Also, tunnel might be configured to force DF bit on outer header. In this case, packet will be dropped (exceeds MTU) and an ICMP error is generated back to sender. But sender already respects the announced MTU, all the packets that it sent did fit the announced mtu. Force refragmentation as per original sizes unconditionally so ip tunnel will encapsulate the fragments instead. The only other solution I see is to place ip refragmentation in the ip_tunnel code to handle this case. Fixes: d6b915e2 ("ip_fragment: don't forward defragmented DF packet") Reported-by:
Christian Perle <christian.perle@secunet.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 0f7ba7bc ] A call to dma_alloc_coherent() is wrapped by sonic_alloc_descriptors(). This is correctly freed in the remove function, but not in the error handling path of the probe function. Fix this by adding the missing dma_free_coherent() call. While at it, rename a label in order to be slightly more informative. Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Chris Zankel <chris@zankel.net> References: commit 10e3cc18 ("net/sonic: Fix a resource leak in an error handling path in 'jazz_sonic_probe()'") Fixes: 74f2a5f0 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.") Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 55b7ab11 ] VLAN checks for NETREG_UNINITIALIZED to distinguish between registration failure and unregistration in progress. Since commit cb626bf5 ("net-sysfs: Fix reference count leak") registration failure may, however, result in NETREG_UNREGISTERED as well as NETREG_UNINITIALIZED. This fix is similer to cebb6975 ("rtnetlink: Fix memory(net_device) leak when ->newlink fails") Fixes: cb626bf5 ("net-sysfs: Fix reference count leak") Signed-off-by:
-
Samuel Holland authored
[ Upstream commit b8239638 ] sun8i_dwmac_exit calls sun8i_dwmac_unpower_internal_phy, but sun8i_dwmac_init did not call sun8i_dwmac_power_internal_phy. This caused PHY power to remain off after a suspend/resume cycle. Fix this by recording if PHY power should be restored, and if so, restoring it. Fixes: 634db83b ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Signed-off-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
-
