- 29 Jun, 2022 30 commits
-
-
Kai-Heng Feng authored
[ Upstream commit 4e0effd9 ] Intel I210 on some Intel Alder Lake platforms can only achieve ~750Mbps Tx speed via iperf. The RR2DCDELAY shows around 0x2xxx DMA delay, which will be significantly lower when 1) ASPM is disabled or 2) SoC package c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx speed can reach to ~950Mbps. According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC", "DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so set it to 1b for "DMA is considered idle when there is no Rx or Tx AND when there are no TLPs indicating that CPU is active detected on the PCIe link (such as the host executes CSR or Configuration register read or write operation)" and performing Tx should also fall under "active CPU on PCIe link" case. In addition to that, commit b6e0c419 ("igb: Move DMA Coalescing init code to separate function.") seems to wrongly changed from enabling E1000_PCIEMISC_LX_DECISION to disabling it, also fix that. Fixes: b6e0c419 ("igb: Move DMA Coalescing init code to separate function.") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220621221056.604304-1-anthony.l.nguyen@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Aidan MacDonald authored
[ Upstream commit 485037ae ] When enabling a type_in_mask irq, the type_buf contents must be AND'd with the mask of the IRQ we're enabling to avoid enabling other IRQs by accident, which can happen if several type_in_mask irqs share a mask register. Fixes: bc998a73 ("regmap: irq: handle HW using separate rising/falling edge interrupts") Signed-off-by:
Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20220620200644.1961936-2-aidanmacdonald.0x0@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Anatolii Gerasymenko authored
[ Upstream commit c3d184c8 ] In current implementation ice_update_phy_type enables all link modes for selected speed. This approach doesn't work for 1000M speeds, because both copper (1000baseT) and optical (1000baseX) standards cannot be enabled at once. Fix this, by adding the function `ice_set_phy_type_from_speed()` for 1000M speeds. Fixes: 48cb27f2 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by:
Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
David Howells authored
[ Upstream commit cb78d1b5 ] The recent patch to make afs_getattr consult the server didn't account for the pseudo-inodes employed by the dynamic root-type afs superblock not having a volume or a server to access, and thus an oops occurs if such a directory is stat'd. Fix this by checking to see if the vnode->volume pointer actually points anywhere before following it in afs_getattr(). This can be tested by stat'ing a directory in /afs. It may be sufficient just to do "ls /afs" and the oops looks something like: BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:afs_getattr+0x8b/0x14b ... Call Trace: <TASK> vfs_statx+0x79/0xf5 vfs_fstatat+0x49/0x62 Fixes: 2aeb8c86 ("afs: Fix afs_getattr() to refetch file status if callback break occurred") Reported-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
huhai authored
[ Upstream commit c81aba8f ] commit 979934da ("[PATCH] mips: update IRQ handling for vr41xx") added a function irq_dispatch, and it'll increase irq_err_count when the get_irq callback returns a negative value, but increase irq_err_count in get_irq was not removed. And also, modpost complains once gpio-vr41xx drivers become modules. ERROR: modpost: "irq_err_count" [drivers/gpio/gpio-vr41xx.ko] undefined! So it would be a good idea to remove repetitive increase irq_err_count in get_irq callback. Fixes: 27fdd325 ("MIPS: Update VR41xx GPIO driver to use gpiolib") Fixes: 979934da ("[PATCH] mips: update IRQ handling for vr41xx") Reported-by:
k2ci <kernel-bot@kylinos.cn> Signed-off-by:
huhai <huhai@kylinos.cn> Signed-off-by:
Genjian Zhang <zhanggenjian@kylinos.cn> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Julien Grall authored
[ Upstream commit ecb6237f ] 1 << 31 is undefined. So switch to 1U << 31. Fixes: 5ead97c8 ("xen: Core Xen implementation") Signed-off-by:
Julien Grall <jgrall@amazon.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220617103037.57828-1-julien@xen.org Signed-off-by:
-
Gerd Hoffmann authored
[ Upstream commit 05b252cc ] Check vm_fault->pgoff before using it. When we removed the warning, we also removed the check. Fixes: 7b26e4e2 ("udmabuf: drop WARN_ON() check.") Reported-by: zdi-disclosures@trendmicro.com Suggested-by:
Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Ziyang Xuan authored
[ Upstream commit 69135c57 ] After setting the sock ktls, update ctx->sk_proto to sock->sk_prot by tls_update(), so now ctx->sk_proto->close is tls_sk_proto_close(). When close the sock, tls_sk_proto_close() is called for sock->sk_prot->close is tls_sk_proto_close(). But ctx->sk_proto->close() will be executed later in tls_sk_proto_close(). Thus tls_sk_proto_close() executed repeatedly occurred. That will trigger the following bug. ================================================================= KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:tls_sk_proto_close+0xd8/0xaf0 net/tls/tls_main.c:306 Call Trace: <TASK> tls_sk_proto_close+0x356/0xaf0 net/tls/tls_main.c:329 inet_release+0x12e/0x280 net/ipv4/af_inet.c:428 __sock_release+0xcd/0x280 net/socket.c:650 sock_close+0x18/0x20 net/socket.c:1365 Updating a proto which is same with sock->sk_prot is incorrect. Add proto and sock->sk_prot equality check at the head of tls_update() to fix it. Fixes: 95fa1454 ("bpf: sockmap/tls, close can race with map free") Reported-by: syzbot+29c3c12f3214b85ad081@syzkaller.appspotmail.com Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 301bd140 ] Rewrite tests in ip6erspan_tunnel_xmit() and erspan_fb_xmit() to not assume transport header is set. syzbot reported: WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 skb_transport_header include/linux/skbuff.h:2911 [inline] WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Modules linked in: CPU: 0 PID: 1350 Comm: aoe_tx0 Not tainted 5.19.0-rc2-syzkaller-00160-g274295c6 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_transport_header include/linux/skbuff.h:2911 [inline] RIP: 0010:ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Code: 0f 47 f0 40 88 b5 7f fe ff ff e8 8c 16 4b f9 89 de bf ff ff ff ff e8 a0 12 4b f9 66 83 fb ff 0f 85 1d f1 ff ff e8 71 16 4b f9 <0f> 0b e9 43 f0 ff ff e8 65 16 4b f9 48 8d 85 30 ff ff ff ba 60 00 RSP: 0018:ffffc90005daf910 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000 RDX: ffff88801f032100 RSI: ffffffff882e8d3f RDI: 0000000000000003 RBP: ffffc90005dafab8 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: ffff888024f21d40 R13: 000000000000a288 R14: 00000000000000b0 R15: ffff888025a2e000 FS: 0000000000000000(0000) GS:ffff88802c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e425000 CR3: 000000006d099000 CR4: 0000000000152ef0 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] xmit_one net/core/dev.c:3588 [inline] dev_hard_start_xmit+0x188/0x880 net/core/dev.c:3604 sch_direct_xmit+0x19f/0xbe0 net/sched/sch_generic.c:342 __dev_xmit_skb net/core/dev.c:3815 [inline] __dev_queue_xmit+0x14a1/0x3900 net/core/dev.c:4219 dev_queue_xmit include/linux/netdevice.h:2994 [inline] tx+0x6a/0xc0 drivers/block/aoe/aoenet.c:63 kthread+0x1e7/0x3b0 drivers/block/aoe/aoecmd.c:1229 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> Fixes: d5db21a3 ("erspan: auto detect truncated ipv6 packets.") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: William Tu <u9012063@gmail.com> Signed-off-by:
-
Miaoqian Lin authored
[ Upstream commit b9cc4598 ] of_graph_get_remote_node() returns remote device node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 86418f90 ("drm: convert drivers to use of_graph_get_remote_node") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488473/ Link: https://lore.kernel.org/r/20220607110841.53889-1-linmq006@gmail.com Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
-
Peilin Ye authored
[ Upstream commit a2b1a5d4 ] As reported by Yuming, currently tc always show a latency of UINT_MAX for netem Qdisc's on 32-bit platforms: $ tc qdisc add dev dummy0 root netem latency 100ms $ tc qdisc show dev dummy0 qdisc netem 8001: root refcnt 2 limit 1000 delay 275s 275s ^^^^^^^^^^^^^^^^ Let us take a closer look at netem_dump(): qopt.latency = min_t(psched_tdiff_t, PSCHED_NS2TICKS(q->latency, UINT_MAX); qopt.latency is __u32, psched_tdiff_t is signed long, (psched_tdiff_t)(UINT_MAX) is negative for 32-bit platforms, so qopt.latency is always UINT_MAX. Fix it by using psched_time_t (u64) instead. Note: confusingly, users have two ways to specify 'latency': 1. normally, via '__u32 latency' in struct tc_netem_qopt; 2. via the TCA_NETEM_LATENCY64 attribute, which is s64. For the second case, theoretically 'latency' could be negative. This patch ignores that corner case, since it is broken (i.e. assigning a negative s64 to __u32) anyways, and should be handled separately. Thanks Ted Lin for the analysis [1] . [1] https://github.com/raspberrypi/linux/issues/3512 Reported-by:
Yuming Chen <chenyuming.junnan@bytedance.com> Fixes: 112f9cb6 ("netem: convert to qdisc_watchdog_schedule_ns") Reviewed-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
Peilin Ye <peilin.ye@bytedance.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/20220616234336.2443-1-yepeilin.cs@gmail.com Signed-off-by:
-
Jay Vosburgh authored
[ Upstream commit 7a9214f3 ] The bonding ARP monitor fails to decrement send_peer_notif, the number of peer notifications (gratuitous ARP or ND) to be sent. This results in a continuous series of notifications. Correct this by decrementing the counter for each notification. Reported-by:
Jonathan Toppins <jtoppins@redhat.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: b0929915 ("bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor") Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.com/ Tested-by:
-
Claudiu Manoil authored
[ Upstream commit 9b7fd167 ] Even when the eth port is resticted to work with speeds not higher than 1G, and so the eth driver is requesting the phy (via phylink) to advertise up to 1000BASET support, the aquantia phy device is still advertising for 2.5G and 5G speeds. Clear these advertising defaults when requested. Cc: Ondrej Spacek <ondrej.spacek@nxp.com> Fixes: 09c4c57f ("net: phy: aquantia: add support for auto-negotiation configuration") Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@nxp.com Signed-off-by:
-
Jon Maxwell authored
[ Upstream commit 3046a827 ] A customer reported a request_socket leak in a Calico cloud environment. We found that a BPF program was doing a socket lookup with takes a refcnt on the socket and that it was finding the request_socket but returning the parent LISTEN socket via sk_to_full_sk() without decrementing the child request socket 1st, resulting in request_sock slab object leak. This patch retains the existing behaviour of returning full socks to the caller but it also decrements the child request_socket if one is present before doing so to prevent the leak. Thanks to Curtis Taylor for all the help in diagnosing and testing this. And thanks to Antoine Tenart for the reproducer and patch input. v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to validate RCU flags on the listen socket so that it balances with bpf_sk_release() and update comments as per Martin KaFai Lau's suggestion. One small change to Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra instruction. Fixes: f7355a6c ("bpf: Check sk_fullsock() before returning from bpf_sk_lookup()") Fixes: edbf8c01 ("bpf: add skc_lookup_tcp helper") Co-developed-by:
Antoine Tenart <atenart@kernel.org> Signed-off-by:
Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Tested-by:
Curtis Taylor <cutaylor-pub@yahoo.com> Cc: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/56d6f898-bde0-bb25-3427-12a330b29fb8@iogearbox.net Link: https://lore.kernel.org/bpf/20220615011540.813025-1-jmaxwell37@gmail.com Signed-off-by:
-
Macpaul Lin authored
commit 15b694e9 upstream. Add usb product id of the Quectel RM500K module. RM500K provides 2 mandatory interfaces to Linux host after enumeration. - /dev/ttyUSB5: this is a serial interface for control path. User needs to write AT commands to this device node to query status, set APN, set PIN code, and enable/disable the data connection to 5G network. - ethX: this is the data path provided as a RNDIS devices. After the data connection has been established, Linux host can access 5G data network via this interface. "RNDIS": RNDIS + ADB + AT (/dev/ttyUSB5) + MODEM COMs usb-devices output for 0x7001: T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=7001 Rev=00.01 S: Manufacturer=MediaTek Inc. S: Product=USB DATA CARD S: SerialNumber=869206050009672 C: #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Co-developed-by:
Ballon Shi <ballon.shi@quectel.com> Signed-off-by:
Macpaul Lin <macpaul.lin@mediatek.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yonglin Tan authored
commit 33b29dbb upstream. The EM05-G modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030a Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030a Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Yonglin Tan <yonglin.tan@outlook.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Carlo Lobrano authored
commit 342fc0c3 upstream. Add support for the following Telit LE910Cx composition: 0x1250: rmnet, tty, tty, tty, tty Reviewed-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
Carlo Lobrano <c.lobrano@gmail.com> Link: https://lore.kernel.org/r/20220614075623.2392607-1-c.lobrano@gmail.com Cc: stable@vger.kernel.org Signed-off-by:
-
Jason A. Donenfeld authored
commit c01d4d0a upstream. random.c ratelimits how much it warns about uninitialized urandom reads using __ratelimit(). When the RNG is finally initialized, it prints the number of missed messages due to ratelimiting. It has been this way since that functionality was introduced back in 2018. Recently, cc1e127b ("random: remove ratelimiting for in-kernel unseeded randomness") put a bit more stress on the urandom ratelimiting, which teased out a bug in the implementation. Specifically, when under pressure, __ratelimit() will print its own message and reset the count back to 0, making the final message at the end less useful. Secondly, it does so as a pr_warn(), which apparently is undesirable for people's CI. Fortunately, __ratelimit() has the RATELIMIT_MSG_ON_RELEASE flag exactly for this purpose, so we set the flag. Fixes: 4e00b339 ("random: rate limit unseeded randomness warnings") Cc: stable@vger.kernel.org Reported-by:
Jon Hunter <jonathanh@nvidia.com> Reported-by:
Ron Economos <re@w6rz.net> Tested-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Mikulas Patocka authored
commit 90736eb3 upstream. Commit 85e123c2 ("dm mirror log: round up region bitmap size to BITS_PER_LONG") introduced a regression on 64-bit architectures in the lvm testsuite tests: lvcreate-mirror, mirror-names and vgsplit-operation. If the device is shrunk, we need to clear log bits beyond the end of the device. The code clears bits up to a 32-bit boundary and then calculates lc->sync_count by summing set bits up to a 64-bit boundary (the commit changed that; previously, this boundary was 32-bit too). So, it was using some non-zeroed bits in the calculation and this caused misbehavior. Fix this regression by clearing bits up to BITS_PER_LONG boundary. Fixes: 85e123c2 ("dm mirror log: round up region bitmap size to BITS_PER_LONG") Cc: stable@vger.kernel.org Reported-by:
Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@kernel.org> Signed-off-by:
-
Nikos Tsironis authored
commit 9ae6e8b1 upstream. During postsuspend dm-era does the following: 1. Archives the current era 2. Commits the metadata, as part of the RPC call for archiving the current era 3. Stops the worker Until the worker stops, it might write to the metadata again. Moreover, these writes are not flushed to disk immediately, but are cached by the dm-bufio client, which writes them back asynchronously. As a result, the committed metadata of a suspended dm-era device might not be consistent with the in-core metadata. In some cases, this can result in the corruption of the on-disk metadata. Suppose the following sequence of events: 1. Load a new table, e.g. a snapshot-origin table, to a device with a dm-era table 2. Suspend the device 3. dm-era commits its metadata, but the worker does a few more metadata writes until it stops, as part of digesting an archived writeset 4. These writes are cached by the dm-bufio client 5. Load the dm-era table to another device. 6. The new instance of the dm-era target loads the committed, on-disk metadata, which don't include the extra writes done by the worker after the metadata commit. 7. Resume the new device 8. The new dm-era target instance starts using the metadata 9. Resume the original device 10. The destructor of the old dm-era target instance is called and destroys the dm-bufio client, which results in flushing the cached writes to disk 11. These writes might overwrite the writes done by the new dm-era instance, hence corrupting its metadata. Fix this by committing the metadata after the worker stops running. stop_worker uses flush_workqueue to flush the current work. However, the work item may re-queue itself and flush_workqueue doesn't wait for re-queued works to finish. This could result in the worker changing the metadata after they have been committed, or writing to the metadata concurrently with the commit in the postsuspend thread. Use drain_workqueue instead, which waits until the work and all re-queued works finish. Fixes: eec40579 ("dm: add era target") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by:
-
Edward Wu authored
commit 540a92bf upstream. Add flags value to check the result of ata completion Fixes: 255c03d1 ("libata: Add tracepoints") Cc: stable@vger.kernel.org Signed-off-by:
Edward Wu <edwardwu@realtek.com> Signed-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
-
Sascha Hauer authored
commit 06781a50 upstream. The DEVICE_BUSY_TIMEOUT value is described in the Reference Manual as: | Timeout waiting for NAND Ready/Busy or ATA IRQ. Used in WAIT_FOR_READY | mode. This value is the number of GPMI_CLK cycles multiplied by 4096. So instead of multiplying the value in cycles with 4096, we have to divide it by that value. Use DIV_ROUND_UP to make sure we are on the safe side, especially when the calculated value in cycles is smaller than 4096 as typically the case. This bug likely never triggered because any timeout != 0 usually will do. In my case the busy timeout in cycles was originally calculated as 2408, which multiplied with 4096 is 0x968000. The lower 16 bits were taken for the 16 bit wide register field, so the register value was 0x8000. With 2970bf5a ("mtd: rawnand: gpmi: fix controller timings setting") however the value in cycles became 2384, which multiplied with 4096 is 0x950000. The lower 16 bit are 0x0 now resulting in an intermediate timeout when reading from NAND. Fixes: b1206122 ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation") Cc: stable@vger.kernel.org Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220614083138.3455683-1-s.hauer@pengutronix.de Signed-off-by:
-
Chevron Li authored
commit e591fcf6 upstream. The result from ->get_cd() may be incorrect as the card detect debouncing isn't managed correctly. Let's fix it. Signed-off-by: Chevron Li<chevron.li@bayhubtech.com> Fixes: 7d440617 ("mmc: sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220602132543.596-1-chevron.li@bayhubtech.com [Ulf: Updated the commit message] Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Rosemarie O'Riorden authored
commit 12378a5a upstream. When a packet enters the OVS datapath and does not match any existing flows installed in the kernel flow cache, the packet will be sent to userspace to be parsed, and a new flow will be created. The kernel and OVS rely on each other to parse packet fields in the same way so that packets will be handled properly. As per the design document linked below, OVS expects all later IPv6 fragments to have nw_proto=44 in the flow key, so they can be correctly matched on OpenFlow rules. OpenFlow controllers create pipelines based on this design. This behavior was changed by the commit in the Fixes tag so that nw_proto equals the next_header field of the last extension header. However, there is no counterpart for this change in OVS userspace, meaning that this field is parsed differently between OVS and the kernel. This is a problem because OVS creates actions based on what is parsed in userspace, but the kernel-provided flow key is used as a match criteria, as described in Documentation/networking/openvswitch.rst. This leads to issues such as packets incorrectly matching on a flow and thus the wrong list of actions being applied to the packet. Such changes in packet parsing cannot be implemented without breaking the userspace. The offending commit is partially reverted to restore the expected behavior. The change technically made sense and there is a good reason that it was implemented, but it does not comply with the original design of OVS. If in the future someone wants to implement such a change, then it must be user-configurable and disabled by default to preserve backwards compatibility with existing OVS versions. Cc: stable@vger.kernel.org Fixes: fa642f08 ("openvswitch: Derive IP protocol number for IPv6 later frags") Link: https://docs.openvswitch.org/en/latest/topics/design/#fragments Signed-off-by:
Rosemarie O'Riorden <roriorden@redhat.com> Acked-by:
Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20220621204845.9721-1-roriorden@redhat.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Tim Crawford authored
commit d4995121 upstream. Fixes speaker output and headset detection on Clevo PD70PNT. Signed-off-by:
Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220617133028.50568-1-tcrawford@system76.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kailang Yang authored
commit fe6900bd upstream. There is not have Headset Mic verb table in BIOS default. So, it will have recording issue from headset MIC. Add the verb table value without jack detect. It will turn on Headset Mic. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/719133a27d8844a890002cb817001dfa@realtek.com Signed-off-by:
-
Takashi Iwai authored
commit 5faa0bc6 upstream. Currently the Conexant codec driver sets up the beep NID after calling snd_hda_gen_parse_auto_config(). It turned out that this results in the insufficient setup for the beep control, as the generic parser handles the fake path in snd_hda_gen_parse_auto_config() only if the beep_nid is set up beforehand. For dealing with the beep widget properly, call cx_auto_parse_beep() before snd_hda_gen_parse_auto_config() call. Fixes: 51e19ca5 ("ALSA: hda/conexant - Clean up beep code") Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152 Link: https://lore.kernel.org/r/20220620104008.1994-1-tiwai@suse.de Signed-off-by:
-
Takashi Iwai authored
commit c7807b27 upstream. Like the previous fix for Conexant codec, the beep_nid has to be set up before calling snd_hda_gen_parse_auto_config(); otherwise it'd miss the path setup. Fix the call order for addressing the missing beep setup. Fixes: 0e8f9862 ("ALSA: hda/via - Simplify control management") Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152 Link: https://lore.kernel.org/r/20220620104008.1994-2-tiwai@suse.de Signed-off-by:
-
Jason A. Donenfeld authored
commit 534d2eaf upstream. It used to be that mix_interrupt_randomness() would credit 1 bit each time it ran, and so add_interrupt_randomness() would schedule mix() to run every 64 interrupts, a fairly arbitrary number, but nonetheless considered to be a decent enough conservative estimate. Since e3e33fc2 ("random: do not use input pool from hard IRQs"), mix() is now able to credit multiple bits, depending on the number of calls to add(). This was done for reasons separate from this commit, but it has the nice side effect of enabling this patch to schedule mix() less often. Currently the rules are: a) Credit 1 bit for every 64 calls to add(). b) Schedule mix() once a second that add() is called. c) Schedule mix() once every 64 calls to add(). Rules (a) and (c) no longer need to be coupled. It's still important to have _some_ value in (c), so that we don't "over-saturate" the fast pool, but the once per second we get from rule (b) is a plenty enough baseline. So, by increasing the 64 in rule (c) to something larger, we avoid calling queue_work_on() as frequently during irq storms. This commit changes that 64 in rule (c) to be 1024, which means we schedule mix() 16 times less often. And it does *not* need to change the 64 in rule (a). Fixes: 58340f8e ("random: defer fast pool mixing to worker") Cc: stable@vger.kernel.org Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Jiri Slaby authored
commit ff2047fb upstream. Drop support for these ioctls: * PIO_FONT, PIO_FONTX * GIO_FONT, GIO_FONTX * PIO_FONTRESET As was demonstrated by commit 90bfdeef (tty: make FONTX ioctl use the tty pointer they were actually passed), these ioctls are not used from userspace, as: 1) they used to be broken (set up font on current console, not the open one) and racy (before the commit above) 2) KDFONTOP ioctl is used for years instead Note that PIO_FONTRESET is defunct on most systems as VGA_CONSOLE is set on them for ages. That turns on BROKEN_GRAPHICS_PROGRAMS which makes PIO_FONTRESET just return an error. We are removing KD_FONT_FLAG_OLD here as it was used only by these removed ioctls. kd.h header exists both in kernel and uapi headers, so we can remove the kernel one completely. Everyone includeing kd.h will now automatically get the uapi one. There are now unused definitions of the ioctl numbers and "struct consolefontdesc" in kd.h, but as it is a uapi header, I am not touching these. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210105120239.28031-8-jslaby@suse.cz Cc: guodaxing <guodaxing@huawei.com> Signed-off-by:
-
- 25 Jun, 2022 10 commits
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220623164321.195163701@linuxfoundation.org Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Hulk Robot <hulkrobot@huawei.com> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 1ec0bc72 which is commit ddaefa20 upstream. It should not have been applied to the stable trees. Link: https://lore.kernel.org/r/20220622154454.GA1864037@roeck-us.net Reported-by:
Julian Haller <julian.haller@philips.com> Reported-by:
-
Will Deacon authored
commit c50f11c6 upstream. Invalidating the buffer memory in arch_sync_dma_for_device() for FROM_DEVICE transfers When using the streaming DMA API to map a buffer prior to inbound non-coherent DMA (i.e. DMA_FROM_DEVICE), we invalidate any dirty CPU cachelines so that they will not be written back during the transfer and corrupt the buffer contents written by the DMA. This, however, poses two potential problems: (1) If the DMA transfer does not write to every byte in the buffer, then the unwritten bytes will contain stale data once the transfer has completed. (2) If the buffer has a virtual alias in userspace, then stale data may be visible via this alias during the period between performing the cache invalidation and the DMA writes landing in memory. Address both of these issues by cleaning (aka writing-back) the dirty lines in arch_sync_dma_for_device(DMA_FROM_DEVICE) instead of discarding them using invalidation. Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220606152150.GA31568@willie-the-truck Signed-off-by:
Will Deacon <will@kernel.org> Reviewed-by:
Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220610151228.4562-2-will@kernel.org Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Willy Tarreau authored
commit e8161345 upstream. In commit 190cc824 ("tcp: change source port randomizarion at connect() time"), the table_perturb[] array was introduced and an index was taken from the port_offset via hash_32(). But it turns out that hash_32() performs a multiplication while the input here comes from the output of SipHash in secure_seq, that is well distributed enough to avoid the need for yet another hash. Suggested-by:
Amit Klein <aksecurity@gmail.com> Reviewed-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Willy Tarreau authored
commit 4c2c8f03 upstream. Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately identify a client by forcing it to emit only 40 times more connections than there are entries in the table_perturb[] table. The previous two improvements consisting in resalting the secret every 10s and adding randomness to each port selection only slightly improved the situation, and the current value of 2^8 was too small as it's not very difficult to make a client emit 10k connections in less than 10 seconds. Thus we're increasing the perturb table from 2^8 to 2^16 so that the same precision now requires 2.6M connections, which is more difficult in this time frame and harder to hide as a background activity. The impact is that the table now uses 256 kB instead of 1 kB, which could mostly affect devices making frequent outgoing connections. However such components usually target a small set of destinations (load balancers, database clients, perf assessment tools), and in practice only a few entries will be visited, like before. A live test at 1 million connections per second showed no performance difference from the previous value. Reported-by:
Moshe Kol <moshe.kol@mail.huji.ac.il> Reported-by:
Yossi Gilad <yossi.gilad@mail.huji.ac.il> Reported-by:
-
Willy Tarreau authored
commit e9261476 upstream. We'll need to further increase the size of this table and it's likely that at some point its size will not be suitable anymore for a static table. Let's allocate it on boot from inet_hashinfo2_init(), which is called from tcp_init(). Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by:
-
Willy Tarreau authored
commit ca7af040 upstream. Here we're randomly adding between 0 and 7 random increments to the selected source port in order to add some noise in the source port selection that will make the next port less predictable. With the default port range of 32768-60999 this means a worst case reuse scenario of 14116/8=1764 connections between two consecutive uses of the same port, with an average of 14116/4.5=3137. This code was stressed at more than 800000 connections per second to a fixed target with all connections closed by the client using RSTs (worst condition) and only 2 connections failed among 13 billion, despite the hash being reseeded every 10 seconds, indicating a perfectly safe situation. Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by:
-
Willy Tarreau authored
commit 9e9b70ae upstream. Amit Klein suggests that we use different parts of port_offset for the table's index and the port offset so that there is no direct relation between them. Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by:
-
Eric Dumazet authored
commit c579bd1b upstream. Even when implementing RFC 6056 3.3.4 (Algorithm 4: Double-Hash Port Selection Algorithm), a patient attacker could still be able to collect enough state from an otherwise idle host. Idea of this patch is to inject some noise, in the cases __inet_hash_connect() found a candidate in the first attempt. This noise should not significantly reduce the collision avoidance, and should be zero if connection table is already well used. Note that this is not implementing RFC 6056 3.3.5 because we think Algorithm 5 could hurt typical workloads. Signed-off-by:
-
Marian Postevca authored
commit b337af3a upstream. In systemd systems setting a fixed MAC address through the "dev_addr" module argument fails systematically. When checking the MAC address after the interface is created it always has the same but different MAC address to the one supplied as argument. This is partially caused by systemd which by default will set an internally generated permanent MAC address for interfaces that are marked as having a randomly generated address. Commit 890d5b40 ("usb: gadget: u_ether: fix race in setting MAC address in setup phase") didn't take into account the fact that the interface must be marked as having a set MAC address when it's set as module argument. Fixed by marking the interface with NET_ADDR_SET when the "dev_addr" module argument is supplied. Fixes: 890d5b40 ("usb: gadget: u_ether: fix race in setting MAC address in setup phase") Cc: stable@vger.kernel.org Signed-off-by:
Marian Postevca <posteuca@mutex.one> Link: https://lore.kernel.org/r/20220603153459.32722-1-posteuca@mutex.one Signed-off-by:
-
