- 20 May, 2020 40 commits
-
-
Justin Swartz authored
commit cec9d101 upstream. The following changes prevent the unrecoverable freezes and rcu_sched stall warnings experienced in each of my attempts to take advantage of lima. Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a COMPOSITE that retains the selection of HDMIPHY as the PLL source, but instead makes uses of the aclk_gpu PLL source gate and parent names defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p. Remove the now unused mux_aclk_gpu_pre_p and the four named but also unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu) of the aclk_gpu PLL source gate. Use the correct gate offset for aclk_gpu and aclk_gpu_noc. Fixes: 307a2e9a ("clk: rockchip: add clock controller for rk3228") Cc: stable@vger.kernel.org Signed-off-by:
Justin Swartz <justin.swartz@risingedge.co.za> [double-checked against SoC manual and added fixes tag] Link: https://lore.kernel.org/r/20200114162503.7548-1-justin.swartz@risingedge.co.za Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric W. Biederman authored
commit f87d1c95 upstream. I goofed when I added mm->user_ns support to would_dump. I missed the fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and binfmt_script bprm->file is reassigned. Which made the move of would_dump from setup_new_exec to __do_execve_file before exec_binprm incorrect as it can result in would_dump running on the script instead of the interpreter of the script. The net result is that the code stopped making unreadable interpreters undumpable. Which allows them to be ptraced and written to disk without special permissions. Oops. The move was necessary because the call in set_new_exec was after bprm->mm was no longer valid. To correct this mistake move the misplaced would_dump from __do_execve_file into flos_old_exec, before exec_mmap is called. I tested and confirmed that without this fix I can attach with gdb to a script with an unreadable interpreter, and with this fix I can not. Cc: stable@vger.kernel.org Fixes: f84df2a6 ("exec: Ensure mm->user_ns contains the execed files") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 71c95825 upstream. The unwind_state 'error' field is used to inform the reliable unwinding code that the stack trace can't be trusted. Set this field for all errors in __unwind_start(). Also, move the zeroing out of the unwind_state struct to before the ORC table initialization check, to prevent the caller from reading uninitialized data if the ORC table is corrupted. Fixes: af085d90 ("stacktrace/x86: add function for detecting reliable stack traces") Fixes: d3a09104 ("x86/unwinder/orc: Dont bail on stack overflow") Fixes: 98d0c8eb ("x86/unwind/orc: Prevent unwinding before ORC initialization") Reported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/d6ac7215a84ca92b895fdd2e1aa546729417e6e6.1589487277.git.jpoimboe@redhat.com Signed-off-by:
-
Borislav Petkov authored
commit a9a3ed1e upstream. ... or the odyssey of trying to disable the stack protector for the function which generates the stack canary value. The whole story started with Sergei reporting a boot crash with a kernel built with gcc-10: Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b3 #139 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013 Call Trace: dump_stack panic ? start_secondary __stack_chk_fail start_secondary secondary_startup_64 -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary This happens because gcc-10 tail-call optimizes the last function call in start_secondary() - cpu_startup_entry() - and thus emits a stack canary check which fails because the canary value changes after the boot_init_stack_canary() call. To fix that, the initial attempt was to mark the one function which generates the stack canary with: __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused) however, using the optimize attribute doesn't work cumulatively as the attribute does not add to but rather replaces previously supplied optimization options - roughly all -fxxx options. The key one among them being -fno-omit-frame-pointer and thus leading to not present frame pointer - frame pointer which the kernel needs. The next attempt to prevent compilers from tail-call optimizing the last function call cpu_startup_entry(), shy of carving out start_secondary() into a separate compilation unit and building it with -fno-stack-protector, was to add an empty asm(""). This current solution was short and sweet, and reportedly, is supported by both compilers but we didn't get very far this time: future (LTO?) optimization passes could potentially eliminate this, which leads us to the third attempt: having an actual memory barrier there which the compiler cannot ignore or move around etc. That should hold for a long time, but hey we said that about the other two solutions too so... Reported-by:
Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by:
Borislav Petkov <bp@suse.de> Tested-by:
Kalle Valo <kvalo@codeaurora.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org Signed-off-by:
-
Adam McCoy authored
commit a4813799 upstream. Failed async writes that are requeued may not clean up a refcount on the file, which can result in a leaked open. This scenario arises very reliably when using persistent handles and a reconnect occurs while writing. cifs_writev_requeue only releases the reference if the write fails (rc != 0). The server->ops->async_writev operation will take its own reference, so the initial reference can always be released. Signed-off-by:
Adam McCoy <adam@forsedomani.com> Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Christophe Leroy authored
commit 4833ce06 upstream. gpr2 is not a parametre of kuap_check(), it doesn't exist. Use gpr instead. Fixes: a68c31fc ("powerpc/32s: Implement Kernel Userspace Access Protection") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/ea599546f2a7771bde551393889e44e6b2632332.1587368807.git.christophe.leroy@c-s.fr Signed-off-by:
-
Simon Ser authored
commit 626bf90f upstream. This patch adds a basic cursor check when an atomic test-only commit is performed. The position and size of the cursor plane is checked. This should fix user-space relying on atomic checks to assign buffers to planes. Signed-off-by:
Simon Ser <contact@emersion.fr> Reported-by:
Roman Gilg <subdiff@gmail.com> References: https://github.com/emersion/libliftoff/issues/46 Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Michal Vokáč authored
commit cbe63a83 upstream. The Y Soft yapp4 platform supports up to two Ethernet ports. The Ursa board though has only one Ethernet port populated and that is the port@2. Since the introduction of this platform into mainline a wrong port was deleted and the Ethernet could never work. Fix this by deleting the correct port node. Fixes: 87489ec3 ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards") Cc: stable@vger.kernel.org Signed-off-by:
Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Fabio Estevam authored
commit 0caf3435 upstream. The I2C2 pins are already used and the following errors are seen: imx27-pinctrl 10015000.iomuxc: pin MX27_PAD_I2C2_SDA already requested by 10012000.i2c; cannot claim for 1001d000.i2c imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22 imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp on device 10015000.iomuxc imx-i2c 1001d000.i2c: Error applying setting, reverse things back imx-i2c: probe of 1001d000.i2c failed with error -22 Fix it by adding the correct I2C1 IOMUX entries for the pinctrl_i2c1 group. Cc: <stable@vger.kernel.org> Fixes: 61664d0b ("ARM: dts: imx27 phyCARD-S pinctrl") Signed-off-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by:
-
Kishon Vijay Abraham I authored
commit 90d4d3f4 upstream. Even though commit cfb5d65f ("ARM: dts: dra7: Add bus_dma_limit for L3 bus") added bus_dma_limit for L3 bus, the PCIe controller gets incorrect value of bus_dma_limit. Fix it by adding empty dma-ranges property to axi@0 and axi@1 (parent device tree node of PCIe controller). Cc: stable@kernel.org Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Peter Jones authored
commit 82152d42 upstream. This was sort of annoying me: random:~$ dmesg | tail -1 [523884.039227] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. random:~$ dmesg | grep -c "Reducing the compressed" 47 This patch makes it DRM_INFO_ONCE() just like the similar message farther down in that function is pr_info_once(). Cc: stable@vger.kernel.org Signed-off-by:
Peter Jones <pjones@redhat.com> Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1745 Link: https://patchwork.freedesktop.org/patch/msgid/20180706190424.29194-1-pjones@redhat.com [vsyrjala: Rebase due to per-device logging] Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 6b7fc6a3 ) [Rodrigo: port back to DRM_INFO_ONCE] Signed-off-by:
-
Sriharsha Allenki authored
commit 3c6f8cb9 upstream. On platforms with IOMMU enabled, multiple SGs can be coalesced into one by the IOMMU driver. In that case the SG list processing as part of the completion of a urb on a bulk endpoint can result into a NULL pointer dereference with the below stack dump. <6> Unable to handle kernel NULL pointer dereference at virtual address 0000000c <6> pgd = c0004000 <6> [0000000c] *pgd=00000000 <6> Internal error: Oops: 5 [#1] PREEMPT SMP ARM <2> PC is at xhci_queue_bulk_tx+0x454/0x80c <2> LR is at xhci_queue_bulk_tx+0x44c/0x80c <2> pc : [<c08907c4>] lr : [<c08907bc>] psr: 000000d3 <2> sp : ca337c80 ip : 00000000 fp : ffffffff <2> r10: 00000000 r9 : 50037000 r8 : 00004000 <2> r7 : 00000000 r6 : 00004000 r5 : 00000000 r4 : 00000000 <2> r3 : 00000000 r2 : 00000082 r1 : c2c1a200 r0 : 00000000 <2> Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none <2> Control: 10c0383d Table: b412c06a DAC: 00000051 <6> Process usb-storage (pid: 5961, stack limit = 0xca336210) <snip> <2> [<c08907c4>] (xhci_queue_bulk_tx) <2> [<c0881b3c>] (xhci_urb_enqueue) <2> [<c0831068>] (usb_hcd_submit_urb) <2> [<c08350b4>] (usb_sg_wait) <2> [<c089f384>] (usb_stor_bulk_transfer_sglist) <2> [<c089f2c0>] (usb_stor_bulk_srb) <2> [<c089fe38>] (usb_stor_Bulk_transport) <2> [<c089f468>] (usb_stor_invoke_transport) <2> [<c08a11b4>] (usb_stor_control_thread) <2> [<c014a534>] (kthread) The above NULL pointer dereference is the result of block_len and the sent_len set to zero after the first SG of the list when IOMMU driver is enabled. Because of this the loop of processing the SGs has run more than num_sgs which resulted in a sg_next on the last SG of the list which has SG_END set. Fix this by check for the sg before any attributes of the sg are accessed. [modified reason for null pointer dereference in commit message subject -Mathias] Fixes: f9c589e1 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: stable@vger.kernel.org Signed-off-by:
Sriharsha Allenki <sallenki@codeaurora.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200514110432.25564-2-mathias.nyman@linux.intel.com Signed-off-by:
-
Kyungtae Kim authored
commit 15753588 upstream. FuzzUSB (a variant of syzkaller) found an illegal array access using an incorrect index while binding a gadget with UDC. Reference: https://www.spinics.net/lists/linux-usb/msg194331.html This bug occurs when a size variable used for a buffer is misused to access its strcpy-ed buffer. Given a buffer along with its size variable (taken from user input), from which, a new buffer is created using kstrdup(). Due to the original buffer containing 0 value in the middle, the size of the kstrdup-ed buffer becomes smaller than that of the original. So accessing the kstrdup-ed buffer with the same size variable triggers memory access violation. The fix makes sure no zero value in the buffer, by comparing the strlen() of the orignal buffer with the size variable, so that the access to the kstrdup-ed buffer is safe. BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208 CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132 gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 flush_write_buffer fs/configfs/file.c:251 [inline] configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283 __vfs_write+0x85/0x110 fs/read_write.c:494 vfs_write+0x1cd/0x510 fs/read_write.c:558 ksys_write+0x18a/0x220 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:620 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
Kyungtae Kim <kt0755@gmail.com> Reported-and-tested-by:
-
Peter Chen authored
commit 95cd7dc4 upstream. And there are no multiple TRBs on EP0 and WA1 workaround, so it doesn't need to change TRB for EP0. It fixes below oops. configfs-gadget gadget: high-speed config #1: b android_work: sent uevent USB_STATE=CONFIGURED Unable to handle kernel read from unreadable memory at virtual address 0000000000000008 Mem abort info: android_work: sent uevent USB_STATE=DISCONNECTED ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b5bb7000 [0000000000000008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 430 Comm: HwBinder:401_1 Not tainted 5.4.24-06071-g6fa8921409c1-dirty #77 Hardware name: Freescale i.MX8QXP MEK (DT) pstate: 60400085 (nZCv daIf +PAN -UAO) pc : cdns3_gadget_ep_dequeue+0x1d4/0x270 lr : cdns3_gadget_ep_dequeue+0x48/0x270 sp : ffff800012763ba0 x29: ffff800012763ba0 x28: ffff00082c653c00 x27: 0000000000000000 x26: ffff000068fa7b00 x25: ffff0000699b2000 x24: ffff00082c6ac000 x23: ffff000834f0a480 x22: ffff000834e87b9c x21: 0000000000000000 x20: ffff000834e87800 x19: ffff000069eddc00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000001 x11: ffff80001180fbe8 x10: 0000000000000001 x9 : ffff800012101558 x8 : 0000000000000001 x7 : 0000000000000006 x6 : ffff000835d9c668 x5 : ffff000834f0a4c8 x4 : 0000000096000000 x3 : 0000000000001810 x2 : 0000000000000000 x1 : ffff800024bd001c x0 : 0000000000000001 Call trace: cdns3_gadget_ep_dequeue+0x1d4/0x270 usb_ep_dequeue+0x34/0xf8 composite_dev_cleanup+0x154/0x170 configfs_composite_unbind+0x6c/0xa8 usb_gadget_remove_driver+0x44/0x70 usb_gadget_unregister_driver+0x74/0xe0 unregister_gadget+0x28/0x58 gadget_dev_desc_UDC_store+0x80/0x110 configfs_write_file+0x1e0/0x2a0 __vfs_write+0x48/0x90 vfs_write+0xe4/0x1c8 ksys_write+0x78/0x100 __arm64_sys_write+0x24/0x30 el0_svc_common.constprop.0+0x74/0x168 el0_svc_handler+0x34/0xa0 el0_svc+0x8/0xc Code: 52830203 b9407660 f94042e4 11000400 (b9400841) ---[ end trace 1574516e4c1772ca ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0002,20002008 Memory Limit: none Rebooting in 5 seconds.. Fixes: f616c3bd ("usb: cdns3: Fix dequeue implementation") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Li Jun authored
commit 1449cb2c upstream. While removing the host (e.g. for USB role switch from host to device), if runtime pm is enabled by user, below oops occurs on dwc3 and cdns3 platforms. Keeping the xhci-plat device active during host removal, and disabling runtime pm before calling pm_runtime_set_suspended() fixes them. oops1: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000240 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.4.3-00107-g64d454a-dirty Hardware name: FSL i.MX8MP EVK (DT) Workqueue: pm pm_runtime_work pstate: 60000005 (nZCv daif -PAN -UAO) pc : xhci_suspend+0x34/0x698 lr : xhci_plat_runtime_suspend+0x2c/0x38 sp : ffff800011ddbbc0 Call trace: xhci_suspend+0x34/0x698 xhci_plat_runtime_suspend+0x2c/0x38 pm_generic_runtime_suspend+0x28/0x40 __rpm_callback+0xd8/0x138 rpm_callback+0x24/0x98 rpm_suspend+0xe0/0x448 rpm_idle+0x124/0x140 pm_runtime_work+0xa0/0xf8 process_one_work+0x1dc/0x370 worker_thread+0x48/0x468 kthread+0xf0/0x120 ret_from_fork+0x10/0x1c oops2: usb 2-1: USB disconnect, device number 2 xhci-hcd xhci-hcd.1.auto: remove, state 4 usb usb2: USB disconnect, device number 1 xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered xhci-hcd xhci-hcd.1.auto: remove, state 4 usb usb1: USB disconnect, device number 1 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000138 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.6.0-rc4-next-20200304-03578 Hardware name: Freescale i.MX8QXP MEK (DT) Workqueue: 1-0050 tcpm_state_machine_work pstate: 20000005 (nzCv daif -PAN -UAO) pc : xhci_free_dev+0x214/0x270 lr : xhci_plat_runtime_resume+0x78/0x88 sp : ffff80001006b5b0 Call trace: xhci_free_dev+0x214/0x270 xhci_plat_runtime_resume+0x78/0x88 pm_generic_runtime_resume+0x30/0x48 __rpm_callback+0x90/0x148 rpm_callback+0x28/0x88 rpm_resume+0x568/0x758 rpm_resume+0x260/0x758 rpm_resume+0x260/0x758 __pm_runtime_resume+0x40/0x88 device_release_driver_internal+0xa0/0x1c8 device_release_driver+0x1c/0x28 bus_remove_device+0xd4/0x158 device_del+0x15c/0x3a0 usb_disable_device+0xb0/0x268 usb_disconnect+0xcc/0x300 usb_remove_hcd+0xf4/0x1dc xhci_plat_remove+0x78/0xe0 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xfc/0x1c8 device_release_driver+0x1c/0x28 bus_remove_device+0xd4/0x158 device_del+0x15c/0x3a0 platform_device_del.part.0+0x20/0x90 platform_device_unregister+0x28/0x40 cdns3_host_exit+0x20/0x40 cdns3_role_stop+0x60/0x90 cdns3_role_set+0x64/0xd8 usb_role_switch_set_role.part.0+0x3c/0x68 usb_role_switch_set_role+0x20/0x30 tcpm_mux_set+0x60/0xf8 tcpm_reset_port+0xa4/0xf0 tcpm_detach.part.0+0x28/0x50 tcpm_state_machine_work+0x12ac/0x2360 process_one_work+0x1c8/0x470 worker_thread+0x50/0x428 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 Code: c8037c02 35ffffa3 17ffe7c3 f9800011 (c85f7c01) ---[ end trace 45b1a173d2679e44 ]--- [minor commit message cleanup -Mathias] Cc: Baolin Wang <baolin.wang@linaro.org> Cc: <stable@vger.kernel.org> Fixes: b0c69b4b ("usb: host: plat: Enable xHCI plat runtime PM") Reviewed-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
-
Eugeniu Rosca authored
commit 76e1ef1d upstream. On Tue, May 12, 2020 at 09:36:07PM +0800, Kai-Heng Feng wrote [1]: > This patch prevents my Raven Ridge xHCI from getting runtime suspend. The problem described in v5.6 commit 1208f9e1 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") applies solely to the USB5534B hub [2] present on the Kingfisher Infotainment Carrier Board, manufactured by Shimafuji Electric Inc [3]. Despite that, the aforementioned commit applied the quirk to _all_ hubs carrying vendor ID 0x424 (i.e. SMSC), of which there are more [4] than initially expected. Consequently, the quirk is now enabled on platforms carrying SMSC/Microchip hub models which potentially don't exhibit the original issue. To avoid reports like [1], further limit the quirk's scope to USB5534B [2], by employing both Vendor and Product ID checks. Tested on H3ULCB + Kingfisher rev. M05. [1] https://lore.kernel.org/linux-renesas-soc/73933975-6F0E-40F5-9584-D2B8F615C0F3@canonical.com/ [2] https://www.microchip.com/wwwproducts/en/USB5534B [3] http://www.shimafuji.co.jp/wp/wp-content/uploads/2018/08/SBEV-RCAR-KF-M06Board_HWSpecificationEN_Rev130.pdf [4] https://devicehunt.com/search/type/usb/vendor/0424/device/any Fixes: 1208f9e1 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: stable@vger.kernel.org # v4.14+ Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Hardik Gajjar <hgajjar@de.adit-jv.com> Cc: linux-renesas-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Reported-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by:
-
Jesus Ramos authored
commit 073919e0 upstream. Kingston HyperX headset with 0951:16ad also needs the same quirk for delaying the frequency controls. Signed-off-by:
Jesus Ramos <jesus-ramos@live.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/BY5PR19MB3634BA68C7CCA23D8DF428E796AF0@BY5PR19MB3634.namprd19.prod.outlook.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit c1f6e3c8 upstream. The rawmidi core allows user to resize the runtime buffer via ioctl, and this may lead to UAF when performed during concurrent reads or writes: the read/write functions unlock the runtime lock temporarily during copying form/to user-space, and that's the race window. This patch fixes the hole by introducing a reference counter for the runtime buffer read/write access and returns -EBUSY error when the resize is performed concurrently against read/write. Note that the ref count field is a simple integer instead of refcount_t here, since the all contexts accessing the buffer is basically protected with a spinlock, hence we need no expensive atomic ops. Also, note that this busy check is needed only against read / write functions, and not in receive/transmit callbacks; the race can happen only at the spinlock hole mentioned in the above, while the whole function is protected for receive / transmit callbacks. Reported-by:
butt3rflyh4ck <butterflyhuangxx@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CAFcO6XMWpUVK_yzzCpp8_XP7+=oUpQvuBeCbMffEDkpe8jWrfg@mail.gmail.com Link: https://lore.kernel.org/r/s5heerw3r5z.wl-tiwai@suse.de Signed-off-by:
-
Takashi Iwai authored
commit 1b94e59d upstream. ASUS ZenBook UX431DA requires an additional COEF setup when booted from the recent Windows 10, otherwise it produces the noisy output. The quirk turns on COEF 0x1b bit 10 that has been cleared supposedly due to the pop noise reduction. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207553 Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit b590b38c upstream. Lenovo Thinkpad T530 seems to have a sensitive internal mic capture that needs to limit the mic boost like a few other Thinkpad models. Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this hits way too many other laptop models, so let's add a new fixup model that limits the internal mic boost on top of the existing quirk and apply to only T530. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200514160533.10337-1-tiwai@suse.de Signed-off-by:
-
Greg Kroah-Hartman authored
commit a0e710a7 upstream. In commit 2bef9aed ("usb: usbfs: correct kernel->user page attribute mismatch") we switched from always calling remap_pfn_range() to call dma_mmap_coherent() to handle issues with systems with non-coherent USB host controller drivers. Unfortunatly, as syzbot quickly told us, not all the world is host controllers with DMA support, so we need to check what host controller we are attempting to talk to before doing this type of allocation. Thanks to Christoph for the quick idea of how to fix this. Fixes: 2bef9aed ("usb: usbfs: correct kernel->user page attribute mismatch") Cc: Christoph Hellwig <hch@lst.de> Cc: Hillf Danton <hdanton@sina.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+353be47c9ce21b68b7ed@syzkaller.appspotmail.com Reviewed-by:
Jeremy Linton <jeremy.linton@arm.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200514112711.1858252-1-gregkh@linuxfoundation.org Signed-off-by:
-
Jeremy Linton authored
commit 2bef9aed upstream. On some architectures (e.g. arm64) requests for IO coherent memory may use non-cachable attributes if the relevant device isn't cache coherent. If these pages are then remapped into userspace as cacheable, they may not be coherent with the non-cacheable mappings. In particular this happens with libusb, when it attempts to create zero-copy buffers for use by rtl-sdr (https://github.com/osmocom/rtl-sdr/ ). On low end arm devices with non-coherent USB ports, the application will be unexpectedly killed, while continuing to work fine on arm machines with coherent USB controllers. This bug has been discovered/reported a few times over the last few years. In the case of rtl-sdr a compile time option to enable/disable zero copy was implemented to work around it. Rather than relaying on application specific workarounds, dma_mmap_coherent() can be used instead of remap_pfn_range(). The page cache/etc attributes will then be correctly set in userspace to match the kernel mapping. Signed-off-by:
-
Linus Torvalds authored
commit 1a263ae6 upstream. gcc-10 has started warning about conflicting types for a few new built-in functions, particularly 'free()'. This results in warnings like: crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch] because the crypto layer had its local freeing functions called 'free()'. Gcc-10 is in the wrong here, since that function is marked 'static', and thus there is no chance of confusion with any standard library function namespace. But the simplest thing to do is to just use a different name here, and avoid this gcc mis-feature. [ Side note: gcc knowing about 'free()' is in itself not the mis-feature: the semantics of 'free()' are special enough that a compiler can validly do special things when seeing it. So the mis-feature here is that gcc thinks that 'free()' is some restricted name, and you can't shadow it as a local static function. Making the special 'free()' semantics be a function attribute rather than tied to the name would be the much better model ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Linus Torvalds authored
commit e99332e7 upstream. It seems that for whatever reason, gcc-10 ends up not inlining a couple of functions that used to be inlined before. Even if they only have one single callsite - it looks like gcc may have decided that the code was unlikely, and not worth inlining. The code generation difference is harmless, but caused a few new section mismatch errors, since the (now no longer inlined) function wasn't in the __init section, but called other init functions: Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem() Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap() Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap() So add the appropriate __init annotation to make modpost not complain. In both cases there were trivially just a single callsite from another __init function. Signed-off-by:
-
Linus Torvalds authored
commit 9d82973e upstream. Due to a bug-report that was compiler-dependent, I updated one of my machines to gcc-10. That shows a lot of new warnings. Happily they seem to be mostly the valid kind, but it's going to cause a round of churn for getting rid of them.. This is the really low-hanging fruit of removing a couple of zero-sized arrays in some core code. We have had a round of these patches before, and we'll have many more coming, and there is nothing special about these except that they were particularly trivial, and triggered more warnings than most. Signed-off-by:
-
Linus Torvalds authored
commit adc71920 upstream. gcc-10 now warns about passing aliasing pointers to functions that take restricted pointers. That's actually a great warning, and if we ever start using 'restrict' in the kernel, it might be quite useful. But right now we don't, and it turns out that the only thing this warns about is an idiom where we have declared a few functions to be "printf-like" (which seems to make gcc pick up the restricted pointer thing), and then we print to the same buffer that we also use as an input. And people do that as an odd concatenation pattern, with code like this: #define sysfs_show_gen_prop(buffer, fmt, ...) \ snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__) where we have 'buffer' as both the destination of the final result, and as the initial argument. Yes, it's a bit questionable. And outside of the kernel, people do have standard declarations like int snprintf( char *restrict buffer, size_t bufsz, const char *restrict format, ... ); where that output buffer is marked as a restrict pointer that cannot alias with any other arguments. But in the context of the kernel, that 'use snprintf() to concatenate to the end result' does work, and the pattern shows up in multiple places. And we have not marked our own version of snprintf() as taking restrict pointers, so the warning is incorrect for now, and gcc picks it up on its own. If we do start using 'restrict' in the kernel (and it might be a good idea if people find places where it matters), we'll need to figure out how to avoid this issue for snprintf and friends. But in the meantime, this warning is not useful. Signed-off-by:
-
Linus Torvalds authored
commit 5a76021c upstream. This is the final array bounds warning removal for gcc-10 for now. Again, the warning is good, and we should re-enable all these warnings when we have converted all the legacy array declaration cases to flexible arrays. But in the meantime, it's just noise. Signed-off-by:
-
Linus Torvalds authored
commit 44720996 upstream. This is another fine warning, related to the 'zero-length-bounds' one, but hitting the same historical code in the kernel. Because C didn't historically support flexible array members, we have code that instead uses a one-sized array, the same way we have cases of zero-sized arrays. The one-sized arrays come from either not wanting to use the gcc zero-sized array extension, or from a slight convenience-feature, where particularly for strings, the size of the structure now includes the allocation for the final NUL character. So with a "char name[1];" at the end of a structure, you can do things like v = my_malloc(sizeof(struct vendor) + strlen(name)); and avoid the "+1" for the terminator. Yes, the modern way to do that is with a flexible array, and using 'offsetof()' instead of 'sizeof()', and adding the "+1" by hand. That also technically gets the size "more correct" in that it avoids any alignment (and thus padding) issues, but this is another long-term cleanup thing that will not happen for 5.7. So disable the warning for now, even though it's potentially quite useful. Having a slew of warnings that then hide more urgent new issues is not an improvement. Signed-off-by:
-
Linus Torvalds authored
commit 5c45de21 upstream. This is a fine warning, but we still have a number of zero-length arrays in the kernel that come from the traditional gcc extension. Yes, they are getting converted to flexible arrays, but in the meantime the gcc-10 warning about zero-length bounds is very verbose, and is hiding other issues. I missed one actual build failure because it was hidden among hundreds of lines of warning. Thankfully I caught it on the second go before pushing things out, but it convinced me that I really need to disable the new warnings for now. We'll hopefully be all done with our conversion to flexible arrays in the not too distant future, and we can then re-enable this warning. Signed-off-by:
-
Linus Torvalds authored
commit 78a5255f upstream. We have some rather random rules about when we accept the "maybe-initialized" warnings, and when we don't. For example, we consider it unreliable for gcc versions < 4.9, but also if -O3 is enabled, or if optimizing for size. And then various kernel config options disabled it, because they know that they trigger that warning by confusing gcc sufficiently (ie PROFILE_ALL_BRANCHES). And now gcc-10 seems to be introducing a lot of those warnings too, so it falls under the same heading as 4.9 did. At the same time, we have a very straightforward way to _enable_ that warning when wanted: use "W=2" to enable more warnings. So stop playing these ad-hoc games, and just disable that warning by default, with the known and straight-forward "if you want to work on the extra compiler warnings, use W=123". Would it be great to have code that is always so obvious that it never confuses the compiler whether a variable is used initialized or not? Yes, it would. In a perfect world, the compilers would be smarter, and our source code would be simpler. That's currently not the world we live in, though. Signed-off-by:
-
Jason Gunthorpe authored
commit 7dba9203 upstream. Returning the error code via a 'int *ret' when the function returns a pointer is very un-kernely and causes gcc 10's static analysis to choke: net/rds/message.c: In function ‘rds_message_map_pages’: net/rds/message.c:358:10: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] 358 | return ERR_PTR(ret); Use a typical ERR_PTR return instead. Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jason Gunthorpe authored
commit 01b2bafe upstream. Aside from good practice, this avoids a warning from gcc 10: ./include/linux/kernel.h:997:3: warning: array subscript -31 is outside array bounds of ‘struct list_head[1]’ [-Warray-bounds] 997 | ((type *)(__mptr - offsetof(type, member))); }) | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/list.h:493:2: note: in expansion of macro ‘container_of’ 493 | container_of(ptr, type, member) | ^~~~~~~~~~~~ ./include/linux/pnp.h:275:30: note: in expansion of macro ‘list_entry’ 275 | #define global_to_pnp_dev(n) list_entry(n, struct pnp_dev, global_list) | ^~~~~~~~~~ ./include/linux/pnp.h:281:11: note: in expansion of macro ‘global_to_pnp_dev’ 281 | (dev) != global_to_pnp_dev(&pnp_global); \ | ^~~~~~~~~~~~~~~~~ arch/x86/kernel/rtc.c:189:2: note: in expansion of macro ‘pnp_for_each_dev’ 189 | pnp_for_each_dev(dev) { Because the common code doesn't cast the starting list_head to the containing struct. Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Olga Kornievskaia authored
[ Upstream commit 8eed292b ] Prior to commit e3d3ab64dd66 ("SUNRPC: Use au_rslack when computing reply buffer size"), there was enough slack in the reply buffer to commodate filehandles of size 60bytes. However, the real problem was that the reply buffer size for the MOUNT operation was not correctly calculated. Received buffer size used the filehandle size for NFSv2 (32bytes) which is much smaller than the allowed filehandle size for the v3 mounts. Fix the reply buffer size (decode arguments size) for the MNT command. Fixes: 2c94b8ec ("SUNRPC: Use au_rslack when computing reply buffer size") Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yafang Shao authored
[ Upstream commit 04fd61a4 ] A recent commit 9852ae3f ("mm, memcg: consider subtrees in memory.events") changed the behavior of memcg events, which will now consider subtrees in memory.events. But oom_kill event is a special one as it is used in both cgroup1 and cgroup2. In cgroup1, it is displayed in memory.oom_control. The file memory.oom_control is in both root memcg and non root memcg, that is different with memory.event as it only in non-root memcg. That commit is okay for cgroup2, but it is not okay for cgroup1 as it will cause inconsistent behavior between root memcg and non-root memcg. Here's an example on why this behavior is inconsistent in cgroup1. root memcg / memcg foo / memcg bar Suppose there's an oom_kill in memcg bar, then the oon_kill will be root memcg : memory.oom_control(oom_kill) 0 / memcg foo : memory.oom_control(oom_kill) 1 / memcg bar : memory.oom_control(oom_kill) 1 For the non-root memcg, its memory.oom_control(oom_kill) includes its descendants' oom_kill, but for root memcg, it doesn't include its descendants' oom_kill. That means, memory.oom_control(oom_kill) has different meanings in different memcgs. That is inconsistent. Then the user has to know whether the memcg is root or not. If we can't fully support it in cgroup1, for example by adding memory.events.local into cgroup1 as well, then let's don't touch its original behavior. Fixes: 9852ae3f ("mm, memcg: consider subtrees in memory.events") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Chris Down <chris@chrisdown.name> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200502141055.7378-1-laoar.shao@gmail.com Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 29b74cb7 ] Fix to return negative error code -ENOMEM from the smcd_alloc_dev() error handling case instead of 0, as done elsewhere in this function. Fixes: 684b89bc ("s390/ism: add device driver for internal shared memory") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Samu Nuutamo authored
[ Upstream commit 333e22db ] When tsi-as-adc is configured it is possible for in7[0123]_input read to return an incorrect value if a concurrent read to in[456]_input is performed. This is caused by a concurrent manipulation of the mux channel without proper locking as hwmon and mfd use different locks for synchronization. Switch hwmon to use the same lock as mfd when accessing the TSI channel. Fixes: 4f16cab1 ("hwmon: da9052: Add support for TSI channel") Signed-off-by:
Samu Nuutamo <samu.nuutamo@vincit.fi> [rebase to current master, reword commit message slightly] Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Potnuri Bharat Teja authored
[ Upstream commit c8b1f340 ] While reading the TCB field in t4_tcb_get_field32() the wrong mask is passed as a parameter which leads the driver eventually to a kernel panic/app segfault from access to an illegal SRQ index while flushing the SRQ completions during connection teardown. Fixes: 11a27e21 ("iw_cxgb4: complete the cached SRQ buffers") Link: https://lore.kernel.org/r/20200511185608.5202-1-bharat@chelsio.com Signed-off-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 50bbe3d3 ] Do not decrease the reference count of resource tracker object twice in the error flow of res_get_common_doit. Fixes: c5dfe0ea ("RDMA/nldev: Add resource tracker doit callback") Link: https://lore.kernel.org/r/20200507062942.98305-1-leon@kernel.org Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 1901b91f ] The IB core pkey cache is populated by procedure ib_cache_update(). Initially, the pkey cache pointer is NULL. ib_cache_update allocates a buffer and populates it with the device's pkeys, via repeated calls to procedure ib_query_pkey(). If there is a failure in populating the pkey buffer via ib_query_pkey(), ib_cache_update does not replace the old pkey buffer cache with the updated one -- it leaves the old cache as is. Since initially the pkey buffer cache is NULL, when calling ib_cache_update the first time, a failure in ib_query_pkey() will cause the pkey buffer cache pointer to remain NULL. In this situation, any calls subsequent to ib_get_cached_pkey(), ib_find_cached_pkey(), or ib_find_cached_pkey_exact() will try to dereference the NULL pkey cache pointer, causing a kernel panic. Fix this by checking the ib_cache_update() return value. Fixes: 8faea9fd ("RDMA/cache: Move the cache per-port data into the main ib_port_data") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/20200507071012.100594-1-leon@kernel.org Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 6693ca95 ] In the mlx4_ib_post_send() flow, some functions call ib_get_cached_pkey() without checking its return value. If ib_get_cached_pkey() returns an error code, these functions should return failure. Fixes: 1ffeb2eb ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Fixes: e622f2f4 ("IB: split struct ib_send_wr") Link: https://lore.kernel.org/r/20200426075921.130074-1-leon@kernel.org Signed-off-by:
-
