- 17 Jan, 2021 6 commits
-
-
Christophe JAILLET authored
[ Upstream commit 0f7ba7bc ] A call to dma_alloc_coherent() is wrapped by sonic_alloc_descriptors(). This is correctly freed in the remove function, but not in the error handling path of the probe function. Fix this by adding the missing dma_free_coherent() call. While at it, rename a label in order to be slightly more informative. Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Chris Zankel <chris@zankel.net> References: commit 10e3cc18 ("net/sonic: Fix a resource leak in an error handling path in 'jazz_sonic_probe()'") Fixes: 74f2a5f0 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.") Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jakub Kicinski authored
[ Upstream commit 55b7ab11 ] VLAN checks for NETREG_UNINITIALIZED to distinguish between registration failure and unregistration in progress. Since commit cb626bf5 ("net-sysfs: Fix reference count leak") registration failure may, however, result in NETREG_UNREGISTERED as well as NETREG_UNINITIALIZED. This fix is similer to cebb6975 ("rtnetlink: Fix memory(net_device) leak when ->newlink fails") Fixes: cb626bf5 ("net-sysfs: Fix reference count leak") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Samuel Holland authored
[ Upstream commit b8239638 ] sun8i_dwmac_exit calls sun8i_dwmac_unpower_internal_phy, but sun8i_dwmac_init did not call sun8i_dwmac_power_internal_phy. This caused PHY power to remain off after a suspend/resume cycle. Fix this by recording if PHY power should be restored, and if so, restoring it. Fixes: 634db83b ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Signed-off-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
-
Samuel Holland authored
[ Upstream commit 52925421 ] While stmmac_pltfr_remove calls sun8i_dwmac_exit, the sun8i_dwmac_init and sun8i_dwmac_exit functions are also called by the stmmac_platform suspend/resume callbacks. They may be called many times during the device's lifetime and should not release resources used by the driver. Furthermore, there was no error handling in case registering the MDIO mux failed during probe, and the EPHY clock was never released at all. Fix all of these issues by moving the deinitialization code to a driver removal callback. Also ensure the EPHY is powered down before removal. Fixes: 634db83b ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Yufeng Mo authored
[ Upstream commit 65e61e3c ] HCLGE_MBX_MAX_ARQ_MSG_NUM is used to apply memory for the number of queues used by ARQ(Asynchronous Receive Queue), so the head and tail pointers should also use this macro. Fixes: 07a0556a ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)") Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Jouni K. Seppänen authored
[ Upstream commit 7a68d725 ] Aligning to tx_ndp_modulus is not sufficient because the next align call can be cdc_ncm_align_tail, which can add up to ctx->tx_modulus + ctx->tx_remainder - 1 bytes. This used to lead to occasional crashes on a Huawei 909s-120 LTE module as follows: - the condition marked /* if there is a remaining skb [...] */ is true so the swaps happen - skb_out is set from ctx->tx_curr_skb - skb_out->len is exactly 0x3f52 - ctx->tx_curr_size is 0x4000 and delayed_ndp_size is 0xac (note that the sum of skb_out->len and delayed_ndp_size is 0x3ffe) - the for loop over n is executed once - the cdc_ncm_align_tail call marked /* align beginning of next frame */ increases skb_out->len to 0x3f56 (the sum is now 0x4002) - the condition marked /* check if we had enough room left [...] */ is false so we break out of the loop - the condition marked /* If requested, put NDP at end of frame. */ is true so the NDP is written into skb_out - now skb_out->len is 0x4002, so padding_count is minus two interpreted as an unsigned number, which is used as the length argument to memset, leading to a crash with various symptoms but usually including > Call Trace: > <IRQ> > cdc_ncm_fill_tx_frame+0x83a/0x970 [cdc_ncm] > cdc_mbim_tx_fixup+0x1d9/0x240 [cdc_mbim] > usbnet_start_xmit+0x5d/0x720 [usbnet] The cdc_ncm_align_tail call first aligns on a ctx->tx_modulus boundary (adding at most ctx->tx_modulus-1 bytes), then adds ctx->tx_remainder bytes. Alternatively, the next alignment call can occur in cdc_ncm_ndp16 or cdc_ncm_ndp32, in which case at most ctx->tx_ndp_modulus-1 bytes are added. A similar problem has occurred before, and the code is nontrivial to reason about, so add a guard before the crashing call. By that time it is too late to prevent any memory corruption (we'll have written past the end of the buffer already) but we can at least try to get a warning written into an on-disk log by avoiding the hard crash caused by padding past the buffer with a huge number of zeros. Signed-off-by:
Jouni K. Seppänen <jks@iki.fi> Fixes: 4a0e3e98 ("cdc_ncm: Add support for moving NDP to end of NCM frame") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209407 Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
- 12 Jan, 2021 34 commits
-
-
Greg Kroah-Hartman authored
Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Pavel Machek (CIP) <pavel@denx.de> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/r/20210111130036.414620026@linuxfoundation.org Signed-off-by:
-
David Disseldorp authored
commit 2896c938 upstream. When attempting to match EXTENDED COPY CSCD descriptors with corresponding se_devices, target_xcopy_locate_se_dev_e4() currently iterates over LIO's global devices list which includes all configured backstores. This change ensures that only initiator-accessible backstores are considered during CSCD descriptor lookup, according to the session's se_node_acl LUN list. To avoid LUN removal race conditions, device pinning is changed from being configfs based to instead using the se_node_acl lun_ref. Reference: CVE-2020-28374 Fixes: cbf031f4 ("target: Add support for EXTENDED_COPY copy offload emulation") Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Paolo Bonzini authored
commit 2f80d502 upstream. Since we know that e >= s, we can reassociate the left shift, changing the shifted number from 1 to 2 in exchange for decreasing the right hand side by 1. Reported-by: syzbot+e87846c48bf72bc85311@syzkaller.appspotmail.com Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Ying-Tsun Huang authored
commit cb7f4a8b upstream. In mtrr_type_lookup(), if the input memory address region is not in the MTRR, over 4GB, and not over the top of memory, a write-back attribute is returned. These condition checks are for ensuring the input memory address region is actually mapped to the physical memory. However, if the end address is just aligned with the top of memory, the condition check treats the address is over the top of memory, and write-back attribute is not returned. And this hits in a real use case with NVDIMM: the nd_pmem module tries to map NVDIMMs as cacheable memories when NVDIMMs are connected. If a NVDIMM is the last of the DIMMs, the performance of this NVDIMM becomes very low since it is aligned with the top of memory and its memory type is uncached-minus. Move the input end address change to inclusive up into mtrr_type_lookup(), before checking for the top of memory in either mtrr_type_lookup_{variable,fixed}() helpers. [ bp: Massage commit message. ] Fixes: 0cc705f5 ("x86/mm/mtrr: Clean up mtrr_type_lookup()") Signed-off-by:
Ying-Tsun Huang <ying-tsun.huang@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201215070721.4349-1-ying-tsun.huang@amd.com Signed-off-by:
-
Florian Westphal authored
commit 6cb56218 upstream. syzbot reports: detected buffer overflow in strlen [..] Call Trace: strlen include/linux/string.h:325 [inline] strlcpy include/linux/string.h:348 [inline] xt_rateest_tg_checkentry+0x2a5/0x6b0 net/netfilter/xt_RATEEST.c:143 strlcpy assumes src is a c-string. Check info->name before its used. Reported-by: syzbot+e86f7c428c8c50db65b4@syzkaller.appspotmail.com Fixes: 5859034d ("[NETFILTER]: x_tables: add RATEEST target") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Vasily Averin authored
commit 5c8193f5 upstream. htable_bits() can call jhash_size(32) and trigger shift-out-of-bounds UBSAN: shift-out-of-bounds in net/netfilter/ipset/ip_set_hash_gen.h:151:6 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 0 PID: 8498 Comm: syz-executor519 Not tainted 5.10.0-rc7-next-20201208-syzkaller #0 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395 htable_bits net/netfilter/ipset/ip_set_hash_gen.h:151 [inline] hash_mac_create.cold+0x58/0x9b net/netfilter/ipset/ip_set_hash_gen.h:1524 ip_set_create+0x610/0x1380 net/netfilter/ipset/ip_set_core.c:1115 nfnetlink_rcv_msg+0xecc/0x1180 net/netfilter/nfnetlink.c:252 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 nfnetlink_rcv+0x1ac/0x420 net/netfilter/nfnetlink.c:600 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2345 ___sys_sendmsg+0xf3/0x170 net/socket.c:2399 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2432 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This patch replaces htable_bits() by simple fls(hashsize - 1) call: it alone returns valid nbits both for round and non-round hashsizes. It is normal to set any nbits here because it is validated inside following htable_size() call which returns 0 for nbits>31. Fixes: 1feab10d ("netfilter: ipset: Unified hash type generation") Reported-by: syzbot+d66bfadebca46cf61a2b@syzkaller.appspotmail.com Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Acked-by:
Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
commit 443d6e86 upstream. This fixes the dereference to fetch the RCU pointer when holding the appropriate xtables lock. Reported-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Reviewed-by:
-
Roger Pau Monne authored
commit 72813bfb upstream. This involves initializing the boot params EFI related fields and the efi global variable. Without this fix a PVH dom0 doesn't detect when booted from EFI, and thus doesn't support accessing any of the EFI related data. Reported-by:
PGNet Dev <pgnet.dev@gmail.com> Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Bard Liao authored
commit 47f44699 upstream. While commit d5dcce0c ("device property: Keep secondary firmware node secondary by type") describes everything correct in its commit message, the change it made does the opposite and original commit c15e1bdd ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") was fully correct. Revert the former one here and improve documentation in the next patch. Fixes: d5dcce0c ("device property: Keep secondary firmware node secondary by type") Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Filipe Manana authored
commit 0b3f407e upstream. When doing an incremental send, if we have a new inode that happens to have the same number that an old directory inode had in the base snapshot and that old directory has a pending rmdir operation, we end up computing a wrong path for the new inode, causing the receiver to fail. Example reproducer: $ cat test-send-rmdir.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV >/dev/null mount $DEV $MNT mkdir $MNT/dir touch $MNT/dir/file1 touch $MNT/dir/file2 touch $MNT/dir/file3 # Filesystem looks like: # # . (ino 256) # |----- dir/ (ino 257) # |----- file1 (ino 258) # |----- file2 (ino 259) # |----- file3 (ino 260) # btrfs subvolume snapshot -r $MNT $MNT/snap1 btrfs send -f /tmp/snap1.send $MNT/snap1 # Now remove our directory and all its files. rm -fr $MNT/dir # Unmount the filesystem and mount it again. This is to ensure that # the next inode that is created ends up with the same inode number # that our directory "dir" had, 257, which is the first free "objectid" # available after mounting again the filesystem. umount $MNT mount $DEV $MNT # Now create a new file (it could be a directory as well). touch $MNT/newfile # Filesystem now looks like: # # . (ino 256) # |----- newfile (ino 257) # btrfs subvolume snapshot -r $MNT $MNT/snap2 btrfs send -f /tmp/snap2.send -p $MNT/snap1 $MNT/snap2 # Now unmount the filesystem, create a new one, mount it and try to apply # both send streams to recreate both snapshots. umount $DEV mkfs.btrfs -f $DEV >/dev/null mount $DEV $MNT btrfs receive -f /tmp/snap1.send $MNT btrfs receive -f /tmp/snap2.send $MNT umount $MNT When running the test, the receive operation for the incremental stream fails: $ ./test-send-rmdir.sh Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1' At subvol /mnt/sdi/snap1 Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2' At subvol /mnt/sdi/snap2 At subvol snap1 At snapshot snap2 ERROR: chown o257-9-0 failed: No such file or directory So fix this by tracking directories that have a pending rmdir by inode number and generation number, instead of only inode number. A test case for fstests follows soon. Reported-by:
Massimo B. <massimo.b@gmx.net> Tested-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Kailang Yang authored
commit f86de9b1 upstream. Cannot adjust speaker's volume on Lenovo C940. Applying the alc298_fixup_speaker_volume function can fix the issue. [ Additional note: C940 has I2S amp for the speaker and this needs the same initialization as Dell machines. The patch was slightly modified so that the quirk entry is moved next to the corresponding Dell quirk entry. -- tiwai ] Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/ea25b4e5c468491aa2e9d6cb1f2fced3@realtek.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
bo liu authored
commit 744a11ab upstream. The current kernel does not support the cx11970 codec chip. Add a codec configuration item to kernel. [ Minor coding style fix by tiwai ] Signed-off-by:
bo liu <bo.liu@senarytech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201229035226.62120-1-bo.liu@senarytech.com Signed-off-by:
-
Takashi Iwai authored
commit 4bfd6247 upstream. Clevo W35xSS_370SS with VIA codec has had the runtime PM problem that looses the power state of some nodes after the runtime resume. This was worked around by disabling the default runtime PM via a denylist entry. Since 5.10.x made the runtime PM applied (casually) even though it's disabled in the denylist, this problem was revisited. The result was that disabling power_save_node feature suffices for the runtime PM problem. This patch implements the disablement of power_save_node feature in VIA codec for the device. It also drops the former denylist entry, too, as the runtime PM should work in the codec side properly now. Fixes: b529ef24 ("ALSA: hda: Add Clevo W35xSS_370SS to the power_save blacklist") Reported-by:
Christian Labisch <clnetbox@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210104153046.19993-1-tiwai@suse.de Signed-off-by:
-
Dan Williams authored
commit d1c5246e upstream. Commit 28ee90fe ("x86/mm: implement free pmd/pte page interfaces") introduced a new location where a pmd was released, but neglected to run the pmd page destructor. In fact, this happened previously for a different pmd release path and was fixed by commit: c283610e ("x86, mm: do not leak page->ptl for pmd page tables"). This issue was hidden until recently because the failure mode is silent, but commit: b2b29d6d ("mm: account PMD tables like PTE tables") turns the failure mode into this signature: BUG: Bad page state in process lt-pmem-ns pfn:15943d page:000000007262ed7b refcount:0 mapcount:-1024 mapping:0000000000000000 index:0x0 pfn:0x15943d flags: 0xaffff800000000() raw: 00affff800000000 dead000000000100 0000000000000000 0000000000000000 raw: 0000000000000000 ffff913a029bcc08 00000000fffffbff 0000000000000000 page dumped because: nonzero mapcount [..] dump_stack+0x8b/0xb0 bad_page.cold+0x63/0x94 free_pcp_prepare+0x224/0x270 free_unref_page+0x18/0xd0 pud_free_pmd_page+0x146/0x160 ioremap_pud_range+0xe3/0x350 ioremap_page_range+0x108/0x160 __ioremap_caller.constprop.0+0x174/0x2b0 ? memremap+0x7a/0x110 memremap+0x7a/0x110 devm_memremap+0x53/0xa0 pmem_attach_disk+0x4ed/0x530 [nd_pmem] ? __devm_release_region+0x52/0x80 nvdimm_bus_probe+0x85/0x210 [libnvdimm] Given this is a repeat occurrence it seemed prudent to look for other places where this destructor might be missing and whether a better helper is needed. try_to_free_pmd_page() looks like a candidate, but testing with setting up and tearing down pmd mappings via the dax unit tests is thus far not triggering the failure. As for a better helper pmd_free() is close, but it is a messy fit due to requiring an @mm arg. Also, ___pmd_free_tlb() wants to call paravirt_tlb_remove_table() instead of free_page(), so open-coded pgtable_pmd_page_dtor() seems the best way forward for now. Debugged together with Matthew Wilcox <willy@infradead.org>. Fixes: 28ee90fe ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Yi Zhang <yi.zhang@redhat.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/160697689204.605323.17629854984697045602.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by:
-
Johan Hovold authored
Remove an unused variable which was mistakingly left by commit 37faf506 ("USB: serial: keyspan_pda: fix write-wakeup use-after-free") and only removed by a later change. This is needed to suppress a W=1 warning about the unused variable in the stable trees that the build bots triggers. Reported-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Eddie Hung authored
commit 64e6bbff upstream. There is a use-after-free issue, if access udc_name in function gadget_dev_desc_UDC_store after another context free udc_name in function unregister_gadget. Context 1: gadget_dev_desc_UDC_store()->unregister_gadget()-> free udc_name->set udc_name to NULL Context 2: gadget_dev_desc_UDC_show()-> access udc_name Call trace: dump_backtrace+0x0/0x340 show_stack+0x14/0x1c dump_stack+0xe4/0x134 print_address_description+0x78/0x478 __kasan_report+0x270/0x2ec kasan_report+0x10/0x18 __asan_report_load1_noabort+0x18/0x20 string+0xf4/0x138 vsnprintf+0x428/0x14d0 sprintf+0xe4/0x12c gadget_dev_desc_UDC_show+0x54/0x64 configfs_read_file+0x210/0x3a0 __vfs_read+0xf0/0x49c vfs_read+0x130/0x2b4 SyS_read+0x114/0x208 el0_svc_naked+0x34/0x38 Add mutex_lock to protect this kind of scenario. Signed-off-by:
Eddie Hung <eddie.hung@mediatek.com> Signed-off-by:
Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by:
Peter Chen <peter.chen@nxp.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1609239215-21819-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by:
-
Chandana Kishori Chiluveru authored
commit 6cd0fe91 upstream. When binding the ConfigFS gadget to a UDC, the functions in each configuration are added in list order. However, if usb_add_function() fails, the failed function is put back on its configuration's func_list and purge_configs_funcs() is called to further clean up. purge_configs_funcs() iterates over the configurations and functions in forward order, calling unbind() on each of the previously added functions. But after doing so, each function gets moved to the tail of the configuration's func_list. This results in reshuffling the original order of the functions within a configuration such that the failed function now appears first even though it may have originally appeared in the middle or even end of the list. At this point if the ConfigFS gadget is attempted to re-bind to the UDC, the functions will be added in a different order than intended, with the only recourse being to remove and relink the functions all over again. An example of this as follows: ln -s functions/mass_storage.0 configs/c.1 ln -s functions/ncm.0 configs/c.1 ln -s functions/ffs.adb configs/c.1 # oops, forgot to start adbd echo "<udc device>" > UDC # fails start adbd echo "<udc device>" > UDC # now succeeds, but... # bind order is # "ADB", mass_storage, ncm [30133.118289] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520 [30133.119875] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520 [30133.119974] using random self ethernet address [30133.120002] using random host ethernet address [30133.139604] usb0: HOST MAC 3e:27:46:ba:3e:26 [30133.140015] usb0: MAC 6e:28:7e:42:66:6a [30133.140062] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520 [30133.140081] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 --> -19 [30133.140098] configfs-gadget gadget: unbind function 'Mass Storage Function'/ffffff810af87200 [30133.140119] configfs-gadget gadget: unbind function 'cdc_network'/ffffff80f48d1a00 [30133.173201] configfs-gadget a600000.dwc3: failed to start g1: -19 [30136.661933] init: starting service 'adbd'... [30136.700126] read descriptors [30136.700413] read strings [30138.574484] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520 [30138.575497] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520 [30138.575554] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520 [30138.575631] using random self ethernet address [30138.575660] using random host ethernet address [30138.595338] usb0: HOST MAC 2e:cf:43:cd:ca:c8 [30138.597160] usb0: MAC 6a:f0:9f:ee:82:a0 [30138.791490] configfs-gadget gadget: super-speed config #1: c Fix this by reversing the iteration order of the functions in purge_config_funcs() when unbinding them, and adding them back to the config's func_list at the head instead of the tail. This ensures that we unbind and unwind back to the original list order. Fixes: 88af8bbe ("usb: gadget: the start of the configfs interface") Signed-off-by:
Chandana Kishori Chiluveru <cchiluve@codeaurora.org> Signed-off-by:
Jack Pham <jackp@codeaurora.org> Reviewed-by:
-
Sriharsha Allenki authored
commit 5cc35c22 upstream. There is a spinlock lockup as part of composite_disconnect when it tries to acquire cdev->lock as part of usb_gadget_deactivate. This is because the usb_gadget_deactivate is called from usb_function_deactivate with the same spinlock held. This would result in the below call stack and leads to stall. rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: 3-...0: (1 GPs behind) idle=162/1/0x4000000000000000 softirq=10819/10819 fqs=2356 (detected by 2, t=5252 jiffies, g=20129, q=3770) Task dump for CPU 3: task:uvc-gadget_wlhe state:R running task stack: 0 pid: 674 ppid: 636 flags:0x00000202 Call trace: __switch_to+0xc0/0x170 _raw_spin_lock_irqsave+0x84/0xb0 composite_disconnect+0x28/0x78 configfs_composite_disconnect+0x68/0x70 usb_gadget_disconnect+0x10c/0x128 usb_gadget_deactivate+0xd4/0x108 usb_function_deactivate+0x6c/0x80 uvc_function_disconnect+0x20/0x58 uvc_v4l2_release+0x30/0x88 v4l2_release+0xbc/0xf0 __fput+0x7c/0x230 ____fput+0x14/0x20 task_work_run+0x88/0x140 do_notify_resume+0x240/0x6f0 work_pending+0x8/0x200 Fix this by doing an unlock on cdev->lock before the usb_gadget_deactivate call from usb_function_deactivate. The same lockup can happen in the usb_gadget_activate path. Fix that path as well. Reported-by:
Sriharsha Allenki <sallenki@codeaurora.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201202130220.24926-1-sallenki@codeaurora.org Signed-off-by:
-
Yang Yingliang authored
commit c91d3a6b upstream. If usb_otg_descriptor_alloc() failed, it need return ENOMEM. Fixes: 578aa8a2 ("usb: gadget: acm_ms: allocate and init otg descriptor by otg capabilities") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201117092955.4102785-1-yangyingliang@huawei.com Signed-off-by:
-
Manish Narani authored
commit 0a88fa22 upstream. Fix the MTU size issue with RX packet size as the host sends the packet with extra bytes containing ethernet header. This causes failure when user sets the MTU size to the maximum i.e. 15412. In this case the ethernet packet received will be of length 15412 plus the ethernet header length. This patch fixes the issue where there is a check that RX packet length must not be more than max packet length. Fixes: bba787a8 ("usb: gadget: ether: Allow jumbo frames") Signed-off-by:
Manish Narani <manish.narani@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1605597215-122027-1-git-send-email-manish.narani@xilinx.com Signed-off-by:
-
Zqiang authored
commit 2cc332e4 upstream. When printer driver is loaded, the printer_func_bind function is called, in this function, the interface descriptor be allocated memory, if after that, the error occurred, the interface descriptor memory need to be free. Reviewed-by:
Zqiang <qiang.zhang@windriver.com> Link: https://lore.kernel.org/r/20201210020148.6691-1-qiang.zhang@windriver.com Signed-off-by:
-
Jerome Brunet authored
commit 9389044f upstream. With commit 913e4a90 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth") wMaxPacketSize is computed dynamically but the value is never reset. Because of this, the actual maximum packet size can only decrease each time the audio gadget is instantiated. Reset the endpoint maximum packet size and mark wMaxPacketSize as dynamic to solve the problem. Fixes: 913e4a90 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201221173531.215169-2-jbrunet@baylibre.com Signed-off-by:
-
Arnd Bergmann authored
commit d7889c20 upstream. Without crc32 support, this driver fails to link: arm-linux-gnueabi-ld: drivers/usb/gadget/function/f_eem.o: in function `eem_unwrap': f_eem.c:(.text+0x11cc): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/usb/gadget/function/f_ncm.o:f_ncm.c:(.text+0x1e40): more undefined references to `crc32_le' follow Fixes: 6d3865f9 ("usb: gadget: NCM: Add transmit multi-frame.") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210103214224.1996535-1-arnd@kernel.org Signed-off-by:
-
Takashi Iwai authored
commit c06ccf3e upstream. The calculation of in_cables and out_cables bitmaps are done with the bit shift by the value from the descriptor, which is an arbitrary value, and can lead to UBSAN shift-out-of-bounds warnings. Fix it by filtering the bad descriptor values with the check of the upper bound 0x10 (the cable bitmaps are 16 bits). Reported-by: syzbot+92e45ae45543f89e8c88@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201223174557.10249-1-tiwai@suse.de Signed-off-by:
-
Johan Hovold authored
commit 020a1f45 upstream. Stack-allocated buffers cannot be used for DMA (on all architectures). Replace the HP-channel macro with a helper function that allocates a dedicated transfer buffer so that it can continue to be used with arguments from the stack. Note that the buffer is cleared on allocation as usblp_ctrl_msg() returns success also on short transfers (the buffer is only used for debugging). Cc: stable@vger.kernel.org Signed-off-by:
-
Johan Hovold authored
commit 372c9313 upstream. Make sure to always cancel the control URB in write() so that it can be reused after a timeout or spurious CMD_ACK. Currently any further write requests after a timeout would fail after triggering a WARN() in usb_submit_urb() when attempting to submit the already active URB. Reported-by: syzbot+e87ebe0f7913f71f2ea5@syzkaller.appspotmail.com Fixes: 6bc235a2 ("USB: add driver for Meywa-Denki & Kayac YUREX") Cc: stable <stable@vger.kernel.org> # 2.6.37 Signed-off-by:
-
Bjørn Mork authored
commit d6c1ddd9 upstream. New modem using ff/ff/30 for QCDM, ff/00/00 for AT and NMEA, and ff/ff/ff for RMNET/QMI. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0620 Rev= 4.09 S: Manufacturer=Quectel S: Product=EM160R-GL S: SerialNumber=e31cedc1 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by:
-
Daniel Palmer authored
commit 0e2d6795 upstream. Add a device-id entry for the LongSung M5710 module. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2df3 ProdID=9d03 Rev= 1.00 S: Manufacturer=Marvell S: Product=Mobile Composite Device Bus S: SerialNumber=<snip> C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Daniel Palmer <daniel@0x0f.com> https://lore.kernel.org/r/20201227031716.1343300-1-daniel@0x0f.com [ johan: drop id defines, only bind to vendor class ] Cc: stable@vger.kernel.org Signed-off-by:
-
Johan Hovold authored
commit 54d0a3ab upstream. Stack-allocated buffers cannot be used for DMA (on all architectures) so allocate the flush command buffer using kmalloc(). Fixes: 60a8fc01 ("USB: add iuu_phoenix driver") Cc: stable <stable@vger.kernel.org> # 2.6.25 Reviewed-by:
-
Thinh Nguyen authored
commit 96ebc9c8 upstream. Here's another variant PNY Pro Elite USB 3.1 Gen 2 portable SSD that hangs and doesn't respond to ATA_1x pass-through commands. If it doesn't support these commands, it should respond properly to the host. Add it to the unusual uas list to be able to move forward with other operations. Cc: stable@vger.kernel.org Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/2edc7af892d0913bf06f5b35e49ec463f03d5ed8.1609819418.git.Thinh.Nguyen@synopsys.com Signed-off-by:
-
Randy Dunlap authored
commit 718bf42b upstream. Fix shift out-of-bounds in vhci_hcd.c: UBSAN: shift-out-of-bounds in ../drivers/usb/usbip/vhci_hcd.c:399:41 shift exponent 768 is too large for 32-bit type 'int' Fixes: 03cd00d5 ("usbip: vhci-hcd: Set the vhci structure up to work") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by: syzbot+297d20e437b79283bf6d@syzkaller.appspotmail.com Cc: Yuyang Du <yuyang.du@intel.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201229071309.18418-1-rdunlap@infradead.org Signed-off-by:
-
Michael Grzeschik authored
commit 5d5323a6 upstream. The commit 0472bf06 ("xhci: Prevent U1/U2 link pm states if exit latency is too long") was constraining the xhci code not to allow U1/U2 sleep states if the latency to wake up from the U-states reached the service interval of an periodic endpoint. This fix was not taking into account that in case the quirk XHCI_INTEL_HOST is set, the wakeup time will be calculated and configured differently. It checks for u1_params.mel/u2_params.mel as a limit. But the code could decide to write another MEL into the hardware. This leads to broken cases where not enough bandwidth is available for other devices: usb 1-2: can't set config #1, error -28 This patch is fixing that case by checking for timeout_ns after the wakeup time was calculated depending on the quirks. Fixes: 0472bf06 ("xhci: Prevent U1/U2 link pm states if exit latency is too long") Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201215193147.11738-1-m.grzeschik@pengutronix.de Signed-off-by:
-
Yu Kuai authored
commit 83a43ff8 upstream. if of_find_device_by_node() succeed, usbmisc_get_init_data() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: ef12da91 ("usb: chipidea: imx: properly check for usbmisc") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201117011430.642589-1-yukuai3@huawei.com Signed-off-by:
-
Serge Semin authored
commit ce722da6 upstream. In accordance with [1] the DWC_usb3 core sets the GUSB2PHYACCn.VStsDone bit when the PHY vendor control access is done and clears it when the application initiates a new transaction. The doc doesn't say anything about the GUSB2PHYACCn.VStsBsy flag serving for the same purpose. Moreover we've discovered that the VStsBsy flag can be cleared before the VStsDone bit. So using the former as a signal of the PHY control registers completion might be dangerous. Let's have the VStsDone flag utilized instead then. [1] Synopsys DesignWare Cores SuperSpeed USB 3.0 xHCI Host Controller Databook, 2.70a, December 2013, p.388 Fixes: 88bc9d19 ("usb: dwc3: add ULPI interface support") Acked-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201210085008.13264-2-Sergey.Semin@baikalelectronics.ru Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
