- 30 Jun, 2021 40 commits
-
-
Steven Rostedt (VMware) authored
commit 4fdd595e upstream. A while ago, when the "trace" file was opened, tracing was stopped, and code was added to stop recording the comms to saved_cmdlines, for mapping of the pids to the task name. Code has been added that only records the comm if a trace event occurred, and there's no reason to not trace it if the trace file is opened. Cc: stable@vger.kernel.org Fixes: 7ffbd48d ("tracing: Cache comms only after an event occurred") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (VMware) authored
commit 85550c83 upstream. The saved_cmdlines is used to map pids to the task name, such that the output of the tracing does not just show pids, but also gives a human readable name for the task. If the name is not mapped, the output looks like this: <...>-1316 [005] ...2 132.044039: ... Instead of this: gnome-shell-1316 [005] ...2 132.044039: ... The names are updated when tracing is running, but are skipped if tracing is stopped. Unfortunately, this stops the recording of the names if the top level tracer is stopped, and not if there's other tracers active. The recording of a name only happens when a new event is written into a ring buffer, so there is no need to test if tracing is on or not. If tracing is off, then no event is written and no need to test if tracing is off or not. Remove the check, as it hides the names of tasks for events in the instance buffers. Cc: stable@vger.kernel.org Fixes: 7ffbd48d ("tracing: Cache comms only after an event occurred") Signed-off-by:
-
Andrew Lunn authored
commit a7d8d1c7 upstream. The Cypress CY7C65632 appears to have an issue with auto suspend and detecting devices, not too dissimilar to the SMSC 5534B hub. It is easiest to reproduce by connecting multiple mass storage devices to the hub at the same time. On a Lenovo Yoga, around 1 in 3 attempts result in the devices not being detected. It is however possible to make them appear using lsusb -v. Disabling autosuspend for this hub resolves the issue. Fixes: 1208f9e1 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: stable@vger.kernel.org Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210614155524.2228800-1-andrew@lunn.ch Signed-off-by:
-
Pavel Skripkin authored
commit 91c02557 upstream. Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) and this flag cannot be used with coherent buffers. Fail log: | [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected | [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem) So, all allocated buffers should be freed with usb_free_coherent() explicitly NOTE: The same pattern for allocating and freeing coherent buffers is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c Fixes: 51f3baad ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Link: https://lore.kernel.org/r/20210609215833.30393-1-paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Reported-and-tested-by: syzbot+57281c762a3922e14dfe@syzkaller.appspotmail.com Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Norbert Slusarek authored
commit 5e87ddbe upstream. On 64-bit systems, struct bcm_msg_head has an added padding of 4 bytes between struct members count and ival1. Even though all struct members are initialized, the 4-byte hole will contain data from the kernel stack. This patch zeroes out struct bcm_msg_head before usage, preventing infoleaks to userspace. Fixes: ffd980f9 ("[CAN]: Add broadcast manager (bcm) protocol") Link: https://lore.kernel.org/r/trinity-7c1b2e82-e34f-4885-8060-2cd7a13769ce-1623532166177@3c-app-gmx-bs52 Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Norbert Slusarek <nslusarek@gmx.net> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Riwen Lu authored
[ Upstream commit 78d13552 ] The scpi hwmon shows the sub-zero temperature in an unsigned integer, which would confuse the users when the machine works in low temperature environment. This shows the sub-zero temperature in an signed value and users can get it properly from sensors. Signed-off-by:
Riwen Lu <luriwen@kylinos.cn> Tested-by:
Xin Chen <chenxin@kylinos.cn> Link: https://lore.kernel.org/r/20210604030959.736379-1-luriwen@kylinos.cn Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chen Li authored
[ Upstream commit ab8363d3 ] I met a gpu addr bug recently and the kernel log tells me the pc is memcpy/memset and link register is radeon_uvd_resume. As we know, in some architectures, optimized memcpy/memset may not work well on device memory. Trival memcpy_toio/memset_io can fix this problem. BTW, amdgpu has already done it in: commit ba0b2275 ("drm/amdgpu: use memcpy_to/fromio for UVD fw upload"), that's why it has no this issue on the same gpu and platform. Signed-off-by:
Chen Li <chenli@uniontech.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Pavel Skripkin authored
[ Upstream commit 9cca0c2d ] static void ec_bhf_remove(struct pci_dev *dev) { ... struct ec_bhf_priv *priv = netdev_priv(net_dev); unregister_netdev(net_dev); free_netdev(net_dev); pci_iounmap(dev, priv->dma_io); pci_iounmap(dev, priv->io); ... } priv is netdev private data, but it is used after free_netdev(). It can cause use-after-free when accessing priv pointer. So, fix it by moving free_netdev() after pci_iounmap() calls. Fixes: 6af55ff5 ("Driver for Beckhoff CX5020 EtherCAT master module.") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Toke Høiland-Jørgensen authored
[ Upstream commit 32182747 ] When constructing ICMP response messages, the kernel will try to pick a suitable source address for the outgoing packet. However, if no IPv4 addresses are configured on the system at all, this will fail and we end up producing an ICMP message with a source address of 0.0.0.0. This can happen on a box routing IPv4 traffic via v6 nexthops, for instance. Since 0.0.0.0 is not generally routable on the internet, there's a good chance that such ICMP messages will never make it back to the sender of the original packet that the ICMP message was sent in response to. This, in turn, can create connectivity and PMTUd problems for senders. Fortunately, RFC7600 reserves a dummy address to be used as a source for ICMP messages (192.0.0.8/32), so let's teach the kernel to substitute that address as a last resort if the regular source address selection procedure fails. Below is a quick example reproducing this issue with network namespaces: ip netns add ns0 ip l add type veth peer netns ns0 ip l set dev veth0 up ip a add 10.0.0.1/24 dev veth0 ip a add fc00:dead:cafe:42::1/64 dev veth0 ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2 ip -n ns0 l set dev veth0 up ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0 ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1 ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0 ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1 tcpdump -tpni veth0 -c 2 icmp & ping -w 1 10.1.0.1 > /dev/null tcpdump: verbose output suppressed, use -v[v]... for full protocol decode listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64 IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92 2 packets captured 2 packets received by filter 0 packets dropped by kernel With this patch the above capture changes to: IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64 IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Juliusz Chroboczek <jch@irif.fr> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Linyu Yuan authored
[ Upstream commit c3b26fdf ] when usbnet transmit a skb, eem fixup it in eem_tx_fixup(), if skb_copy_expand() failed, it return NULL, usbnet_start_xmit() will have no chance to free original skb. fix it by free orginal skb in eem_tx_fixup() first, then check skb clone status, if failed, return NULL to usbnet. Fixes: 9f722c09 ("usbnet: CDC EEM support (v5)") Signed-off-by:
Linyu Yuan <linyyuan@codeaurora.org> Reviewed-by:
-
Pavel Skripkin authored
[ Upstream commit 7edcc682 ] My local syzbot instance hit memory leak in mkiss_open()[1]. The problem was in missing free_netdev() in mkiss_close(). In mkiss_open() netdevice is allocated and then registered, but in mkiss_close() netdevice was only unregistered, but not freed. Fail log: BUG: memory leak unreferenced object 0xffff8880281ba000 (size 4096): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0............. 00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880141a9a00 (size 96): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(.... 98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@.......... backtrace: [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310 [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0 [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0 [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880219bfc00 (size 512): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............ 80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff888029b2b200 (size 256): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 815f62bf ("[PATCH] SMP rewrite of mkiss") Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit c19c8c0e ] If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: d6b6d987 ("be2net: use PCIe AER capability") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a494bd64 ] While unix_may_send(sk, osk) is called while osk is locked, it appears unix_release_sock() can overwrite unix_peer() after this lock has been released, making KCSAN unhappy. Changing unix_release_sock() to access/change unix_peer() before lock is released should fix this issue. BUG: KCSAN: data-race in unix_dgram_sendmsg / unix_release_sock write to 0xffff88810465a338 of 8 bytes by task 20852 on cpu 1: unix_release_sock+0x4ed/0x6e0 net/unix/af_unix.c:558 unix_release+0x2f/0x50 net/unix/af_unix.c:859 __sock_release net/socket.c:599 [inline] sock_close+0x6c/0x150 net/socket.c:1258 __fput+0x25b/0x4e0 fs/file_table.c:280 ____fput+0x11/0x20 fs/file_table.c:313 task_work_run+0xae/0x130 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x156/0x190 kernel/entry/common.c:209 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:302 do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88810465a338 of 8 bytes by task 20888 on cpu 0: unix_may_send net/unix/af_unix.c:189 [inline] unix_dgram_sendmsg+0x923/0x1610 net/unix/af_unix.c:1712 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff888167905400 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 20888 Comm: syz-executor.0 Not tainted 5.13.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Chengyang Fan authored
[ Upstream commit d8e29730 ] BUG: memory leak unreferenced object 0xffff888101bc4c00 (size 32): comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................ backtrace: [<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline] [<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline] [<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline] [<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095 [<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416 [<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline] [<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423 [<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857 [<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117 [<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline] [<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline] [<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125 [<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47 [<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae In commit 24803f38 ("igmp: do not remove igmp souce list info when set link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed, because it was also called in igmpv3_clear_delrec(). Rough callgraph: inetdev_destroy -> ip_mc_destroy_dev -> igmpv3_clear_delrec -> ip_mc_clear_src -> RCU_INIT_POINTER(dev->ip_ptr, NULL) However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through inetdev_by_index() and then in_dev->mc_list->sources cannot be released by ip_mc_del1_src() in the sock_close. Rough call sequence goes like: sock_close -> __sock_release -> inet_release -> ip_mc_drop_socket -> inetdev_by_index -> ip_mc_leave_src -> ip_mc_del_src -> ip_mc_del1_src So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free in_dev->mc_list->sources. Fixes: 24803f38 ("igmp: do not remove igmp souce list info ...") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Chengyang Fan <cy.fan@huawei.com> Acked-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Dongliang Mu authored
[ Upstream commit 56b786d8 ] The commit 46a8b29c ("net: usb: fix memory leak in smsc75xx_bind") fails to clean up the work scheduled in smsc75xx_reset-> smsc75xx_set_multicast, which leads to use-after-free if the work is scheduled to start after the deallocation. In addition, this patch also removes a dangling pointer - dev->data[0]. This patch calls cancel_work_sync to cancel the scheduled work and set the dangling pointer to NULL. Fixes: 46a8b29c ("net: usb: fix memory leak in smsc75xx_bind") Signed-off-by:
Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by:
-
Maciej Żenczykowski authored
[ Upstream commit c1a3d406 ] This is meant to make the host side cdc_ncm interface consistently named just like the older CDC protocols: cdc_ether & cdc_ecm (and even rndis_host), which all use 'FLAG_ETHER | FLAG_POINTTOPOINT'. include/linux/usb/usbnet.h: #define FLAG_ETHER 0x0020 /* maybe use "eth%d" names */ #define FLAG_WLAN 0x0080 /* use "wlan%d" names */ #define FLAG_WWAN 0x0400 /* use "wwan%d" names */ #define FLAG_POINTTOPOINT 0x1000 /* possibly use "usb%d" names */ drivers/net/usb/usbnet.c @ line 1711: strcpy (net->name, "usb%d"); ... // heuristic: "usb%d" for links we know are two-host, // else "eth%d" when there's reasonable doubt. userspace // can rename the link if it knows better. if ((dev->driver_info->flags & FLAG_ETHER) != 0 && ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 || (net->dev_addr [0] & 0x02) == 0)) strcpy (net->name, "eth%d"); /* WLAN devices should always be named "wlan%d" */ if ((dev->driver_info->flags & FLAG_WLAN) != 0) strcpy(net->name, "wlan%d"); /* WWAN devices should always be named "wwan%d" */ if ((dev->driver_info->flags & FLAG_WWAN) != 0) strcpy(net->name, "wwan%d"); So by using ETHER | POINTTOPOINT the interface naming is either usb%d or eth%d based on the global uniqueness of the mac address of the device. Without this 2.5gbps ethernet dongles which all seem to use the cdc_ncm driver end up being called usb%d instead of eth%d even though they're definitely not two-host. (All 1gbps & 5gbps ethernet usb dongles I've tested don't hit this problem due to use of different drivers, primarily r8152 and aqc111) Fixes tag is based purely on git blame, and is really just here to make sure this hits LTS branches newer than v4.5. Cc: Lorenzo Colitti <lorenzo@google.com> Fixes: 4d06dd53 ("cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind") Signed-off-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 49a10c7b ] If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: e87ad553 ("netxen: support pci error handlers") Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit cb337660 ] If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 451724c8 ("qlcnic: aer support") Signed-off-by:
-
Jisheng Zhang authored
[ Upstream commit 1adb20f0 ] The register starts from 0x800 is the 16th MAC address register rather than the first one. Fixes: cffb13f4 ("stmmac: extend mac addr reg and fix perfect filering") Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 33e38144 ] If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: ab69bde6 ("alx: add a simple AR816x/AR817x device driver") Signed-off-by:
-
Maxim Mikityanskiy authored
[ Upstream commit 5fc177ab ] The TCP option parser in synproxy (synproxy_parse_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad2 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added an early return when length < 0 to avoid calling skb_header_pointer with negative length. Cc: Young Xiao <92siuyang@gmail.com> Fixes: 48b1de4c ("netfilter: add SYNPROXY core/target") Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit d2e381c4 ] Cited commit started returning errors when notification info is not filled by the bridge driver, resulting in the following regression: # ip link add name br1 type bridge vlan_filtering 1 # bridge vlan add dev br1 vid 555 self pvid untagged RTNETLINK answers: Invalid argument As long as the bridge driver does not fill notification info for the bridge device itself, an empty notification should not be considered as an error. This is explained in commit 59ccaaaa ("bridge: dont send notification when skb->len == 0 in rtnl_bridge_notify"). Fix by removing the error and add a comment to avoid future bugs. Fixes: a8db57c1 ("rtnetlink: Fix missing error code in rtnl_bridge_notify()") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit a8b897c7 ] Kaustubh reported and diagnosed a panic in udp_lib_lookup(). The root cause is udp_abort() racing with close(). Both racing functions acquire the socket lock, but udp{v6}_destroy_sock() release it before performing destructive actions. We can't easily extend the socket lock scope to avoid the race, instead use the SOCK_DEAD flag to prevent udp_abort from doing any action when the critical race happens. Diagnosed-and-tested-by:
Kaustubh Pandey <kapandey@codeaurora.org> Fixes: 5d77dca8 ("net: diag: support SOCK_DESTROY for UDP sockets") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Pavel Skripkin authored
[ Upstream commit 49bfcbfd ] Syzbot reported memory leak in rds. The problem was in unputted refcount in case of error. int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int msg_flags) { ... if (!rds_next_incoming(rs, &inc)) { ... } After this "if" inc refcount incremented and if (rds_cmsg_recv(inc, msg, rs)) { ret = -EFAULT; goto out; } ... out: return ret; } in case of rds_cmsg_recv() fail the refcount won't be decremented. And it's easy to see from ftrace log, that rds_inc_addref() don't have rds_inc_put() pair in rds_recvmsg() after rds_cmsg_recv() 1) | rds_recvmsg() { 1) 3.721 us | rds_inc_addref(); 1) 3.853 us | rds_message_inc_copy_to_user(); 1) + 10.395 us | rds_cmsg_recv(); 1) + 34.260 us | } Fixes: bdbe6fbc ("RDS: recv.c") Reported-and-tested-by: syzbot+5134cdf021c4ed5aaa5f@syzkaller.appspotmail.com Signed-off-by:
Håkon Bugge <haakon.bugge@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Nanyong Sun authored
[ Upstream commit d612c3f3 ] Reported by syzkaller: BUG: memory leak unreferenced object 0xffff888105df7000 (size 64): comm "syz-executor842", pid 360, jiffies 4294824824 (age 22.546s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000e67ed558>] kmalloc include/linux/slab.h:590 [inline] [<00000000e67ed558>] kzalloc include/linux/slab.h:720 [inline] [<00000000e67ed558>] netlbl_cipsov4_add_std net/netlabel/netlabel_cipso_v4.c:145 [inline] [<00000000e67ed558>] netlbl_cipsov4_add+0x390/0x2340 net/netlabel/netlabel_cipso_v4.c:416 [<0000000006040154>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 net/netlink/genetlink.c:739 [<00000000204d7a1c>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] [<00000000204d7a1c>] genl_rcv_msg+0x2bf/0x4f0 net/netlink/genetlink.c:800 [<00000000c0d6a995>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000d78b9d2c>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 [<000000009733081b>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<000000009733081b>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000d5fd43b8>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000a2d1e40>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000a2d1e40>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000321d1969>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000964e16bc>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000001615e288>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<000000004ee8b6a5>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<00000000171c7cee>] entry_SYSCALL_64_after_hwframe+0x44/0xae The memory of doi_def->map.std pointing is allocated in netlbl_cipsov4_add_std, but no place has freed it. It should be freed in cipso_v4_doi_free which frees the cipso DOI resource. Fixes: 96cb8e33 ("[NetLabel]: CIPSOv4 and Unlabeled packet integration") Reported-by:
Nanyong Sun <sunnanyong@huawei.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 9f460ae3 ] The soft/batadv interface for a queued OGM can be changed during the time the OGM was queued for transmission and when the OGM is actually transmitted by the worker. But WARN_ON must be used to denote kernel bugs and not to print simple warnings. A warning can simply be printed using pr_warn. Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by: syzbot+c0b807de416427ff3dd1@syzkaller.appspotmail.com Fixes: ef0a937f ("batman-adv: consider outgoing interface in OGM sending") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
yangerkun authored
[ Upstream commit e8675d29 ] Our syzkaller trigger the "BUG_ON(!list_empty(&inode->i_wb_list))" in clear_inode: kernel BUG at fs/inode.c:519! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: Process syz-executor.0 (pid: 249, stack limit = 0x00000000a12409d7) CPU: 1 PID: 249 Comm: syz-executor.0 Not tainted 4.19.95 Hardware name: linux,dummy-virt (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : clear_inode+0x280/0x2a8 lr : clear_inode+0x280/0x2a8 Call trace: clear_inode+0x280/0x2a8 ext4_clear_inode+0x38/0xe8 ext4_free_inode+0x130/0xc68 ext4_evict_inode+0xb20/0xcb8 evict+0x1a8/0x3c0 iput+0x344/0x460 do_unlinkat+0x260/0x410 __arm64_sys_unlinkat+0x6c/0xc0 el0_svc_common+0xdc/0x3b0 el0_svc_handler+0xf8/0x160 el0_svc+0x10/0x218 Kernel panic - not syncing: Fatal exception A crash dump of this problem show that someone called __munlock_pagevec to clear page LRU without lock_page: do_mmap -> mmap_region -> do_munmap -> munlock_vma_pages_range -> __munlock_pagevec. As a result memory_failure will call identify_page_state without wait_on_page_writeback. And after truncate_error_page clear the mapping of this page. end_page_writeback won't call sb_clear_inode_writeback to clear inode->i_wb_list. That will trigger BUG_ON in clear_inode! Fix it by checking PageWriteback too to help determine should we skip wait_on_page_writeback. Link: https://lkml.kernel.org/r/20210604084705.3729204-1-yangerkun@huawei.com Fixes: 0bc1f8b0 ("hwpoison: fix the handling path of the victimized page frame that belong to non-LRU") Signed-off-by:
yangerkun <yangerkun@huawei.com> Acked-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Jan Kara <jack@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yu Kuai <yukuai3@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Yang Yingliang authored
[ Upstream commit fffdaba4 ] Add the missing iounmap() before return from d40_probe() in the error handling case. Fixes: 8d318a50 ("DMAENGINE: Support for ST-Ericssons DMA40 block v3") Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210518141108.1324127-1-yangyingliang@huawei.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 0cfbb589 ] When CONFIG_HAS_IOMEM is not set/enabled, certain iomap() family functions [including ioremap(), devm_ioremap(), etc.] are not available. Drivers that use these functions should depend on HAS_IOMEM so that they do not cause build errors. Rectifies these build errors: s390-linux-ld: drivers/dma/qcom/hidma_mgmt.o: in function `hidma_mgmt_probe': hidma_mgmt.c:(.text+0x780): undefined reference to `devm_ioremap_resource' s390-linux-ld: drivers/dma/qcom/hidma_mgmt.o: in function `hidma_mgmt_init': hidma_mgmt.c:(.init.text+0x126): undefined reference to `of_address_to_resource' s390-linux-ld: hidma_mgmt.c:(.init.text+0x16e): undefined reference to `of_address_to_resource' Fixes: 67a2003e ("dmaengine: add Qualcomm Technologies HIDMA channel driver") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Link: https://lore.kernel.org/r/20210522021313.16405-3-rdunlap@infradead.org Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 253697b9 ] When CONFIG_HAS_IOMEM is not set/enabled, certain iomap() family functions [including ioremap(), devm_ioremap(), etc.] are not available. Drivers that use these functions should depend on HAS_IOMEM so that they do not cause build errors. Repairs this build error: s390-linux-ld: drivers/dma/altera-msgdma.o: in function `request_and_map': altera-msgdma.c:(.text+0x14b0): undefined reference to `devm_ioremap' Fixes: a85c6f1b ("dmaengine: Add driver for Altera / Intel mSGDMA IP core") Signed-off-by:
Stefan Roese <sr@denx.de> Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de Link: https://lore.kernel.org/r/20210522021313.16405-2-rdunlap@infradead.org Signed-off-by:
-
Zheng Yongjun authored
[ Upstream commit 59607863 ] When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
Zheng Yongjun authored
[ Upstream commit 49251cd0 ] When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
-
Zheng Yongjun authored
[ Upstream commit d7736958 ] When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
-
Jiapeng Chong authored
[ Upstream commit a8db57c1 ] The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'err'. Eliminate the follow smatch warning: net/core/rtnetlink.c:4834 rtnl_bridge_notify() warn: missing error code 'err'. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Josh Triplett authored
[ Upstream commit b508d5fb ] If the user specifies a hostname or domain name as part of the ip= command-line option, preserve it and don't overwrite it with one supplied by DHCP/BOOTP. For instance, ip=::::myhostname::dhcp will use "myhostname" rather than ignoring and overwriting it. Fix the comment on ic_bootp_string that suggests it only copies a string "if not already set"; it doesn't have any such logic. Signed-off-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Hannes Reinecke authored
[ Upstream commit 4237de2f ] We need to check the NVME_LOOP_Q_LIVE flag in nvme_loop_destroy_admin_queue() to protect against duplicate invocations eg during concurrent reset and remove calls. Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Hannes Reinecke authored
[ Upstream commit 1c5f8e88 ] When the call to nvme_enable_ctrl() in nvme_loop_configure_admin_queue() fails the NVME_LOOP_Q_LIVE flag is not cleared. Signed-off-by:
-
Hannes Reinecke authored
[ Upstream commit a6c144f3 ] The queue count is increased in nvme_loop_init_io_queues(), so we need to reset it to 1 at the end of nvme_loop_destroy_io_queues(). Otherwise the function is not re-entrant safe, and crash will happen during concurrent reset and remove calls. Signed-off-by:
-
Jiapeng Chong authored
[ Upstream commit f336d0b9 ] The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'status'. Eliminate the follow smatch warning: drivers/net/ethernet/myricom/myri10ge/myri10ge.c:3818 myri10ge_probe() warn: missing error code 'status'. Reported-by:
-
Maurizio Lombardi authored
[ Upstream commit 515da6f4 ] On realtime kernels, spin_lock_irq*(spinlock_t) do not disable the interrupts, a call to irqs_disabled() will return false thus firing a warning in __transport_wait_for_tasks(). Remove the warning and also replace assert_spin_locked() with lockdep_assert_held() Link: https://lore.kernel.org/r/20210531121326.3649-1-mlombard@redhat.com Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
