- 28 Mar, 2022 6 commits
-
-
Tadeusz Struk authored
commit 2e8e4c8f upstream. When an invalid (non existing) handle is used in a TPM command, that uses the resource manager interface (/dev/tpmrm0) the resource manager tries to load it from its internal cache, but fails and the tpm_dev_transmit returns an -EINVAL error to the caller. The existing async handler doesn't handle these error cases currently and the condition in the poll handler never returns mask with EPOLLIN set. The result is that the poll call blocks and the application gets stuck until the user_read_timer wakes it up after 120 sec. Change the tpm_dev_async_work function to handle error conditions returned from tpm_dev_transmit they are also reflected in the poll mask and a correct error code could passed back to the caller. Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: <linux-integrity@vger.kernel.org> Cc: <stable@vger.kernel.org> Cc: <linux-kernel@vger.kernel.org> Fixes: 9e1b74a6 ("tpm: add support for nonblocking operation") Tested-by: Jarkko Sakkinen<jarkko@kernel.org> Signed-off-by:
Tadeusz Struk <tstruk@gmail.com> Reviewed-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steffen Klassert authored
commit ebe48d36 upstream. The maximum message size that can be send is bigger than the maximum site that skb_page_frag_refill can allocate. So it is possible to write beyond the allocated buffer. Fix this by doing a fallback to COW in that case. v2: Avoid get get_order() costs as suggested by Linus Torvalds. Fixes: cac2661c ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f ("esp6: Avoid skb_cow_data whenever possible") Reported-by:
valis <sec@valis.email> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Vaibhav Rustagi <vaibhavrustagi@google.com> Signed-off-by:
-
Tadeusz Struk authored
commit 5e34af41 upstream. Syzbot found a kernel bug in the ipv6 stack: LINK: https://syzkaller.appspot.com/bug?id=205d6f11d72329ab8d62a610c44c5e7e25415580 The reproducer triggers it by sending a crafted message via sendmmsg() call, which triggers skb_over_panic, and crashes the kernel: skbuff: skb_over_panic: text:ffffffff84647fb4 len:65575 put:65575 head:ffff888109ff0000 data:ffff888109ff0088 tail:0x100af end:0xfec0 dev:<NULL> Update the check that prevents an invalid packet with MTU equal to the fregment header size to eat up all the space for payload. The reproducer can be found here: LINK: https://syzkaller.appspot.com/text?tag=ReproC&x=1648c83fb00000 Reported-by: syzbot+e223cf47ec8ae183f2a0@syzkaller.appspotmail.com Signed-off-by:
Tadeusz Struk <tadeusz.struk@linaro.org> Acked-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20220310232538.1044947-1-tadeusz.struk@linaro.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jordy Zomer authored
commit 4fbcc1a4 upstream. It appears that there are some buffer overflows in EVT_TRANSACTION. This happens because the length parameters that are passed to memcpy come directly from skb->data and are not guarded in any way. Signed-off-by:
Jordy Zomer <jordy@pwning.systems> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Denis Efremov <denis.e.efremov@oracle.com> Signed-off-by:
-
Trond Myklebust authored
commit 9542e6a6 upstream. Ensure that if the filecache laundrette gets stuck, it only affects the knfsd instances of one container. The notifier callbacks can be called from various contexts so avoid using synchonous filesystem operations that might deadlock. Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Cc: Khazhy Kumykov <khazhy@google.com> Signed-off-by:
-
Trond Myklebust authored
commit 36ebbdb9 upstream. Signed-off-by:
-
- 23 Mar, 2022 18 commits
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220321133217.148831184@linuxfoundation.org Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit dcf55b07 which is commit a7e75016 upstream. It is reported to break the bpf self-tests. Reported-by:
Geliang Tang <geliang.tang@suse.com> Reported-by:
Tommi Rantala <tommi.t.rantala@nokia.com> Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com Cc: Sasha Levin <sashal@kernel.org> Link: https://lore.kernel.org/r/a0a7298ca5c64b3d0ecfcc8821c2de79186fa9f7.camel@nokia.com Link: https://lore.kernel.org/r/HE1PR0402MB3497CB13A12C4D15D20A1FCCF8139@HE1PR0402MB3497.eurprd04.prod.outlook.com Signed-off-by:
-
Michael Petlan authored
commit 3cf6a32f upstream. Before this patch, the symbol end address fixup to be called, needed two conditions being met: if (prev->end == prev->start && prev->end != curr->start) Where "prev->end == prev->start" means that prev is zero-long (and thus needs a fixup) and "prev->end != curr->start" means that fixup hasn't been applied yet However, this logic is incorrect in the following situation: *curr = {rb_node = {__rb_parent_color = 278218928, rb_right = 0x0, rb_left = 0x0}, start = 0xc000000000062354, end = 0xc000000000062354, namelen = 40, type = 2 '\002', binding = 0 '\000', idle = 0 '\000', ignore = 0 '\000', inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false, name = 0x1159739e "kprobe_optinsn_page\t[__builtin__kprobes]"} *prev = {rb_node = {__rb_parent_color = 278219041, rb_right = 0x109548b0, rb_left = 0x109547c0}, start = 0xc000000000062354, end = 0xc000000000062354, namelen = 12, type = 2 '\002', binding = 1 '\001', idle = 0 '\000', ignore = 0 '\000', inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false, name = 0x1095486e "optinsn_slot"} In this case, prev->start == prev->end == curr->start == curr->end, thus the condition above thinks that "we need a fixup due to zero length of prev symbol, but it has been probably done, since the prev->end == curr->start", which is wrong. After the patch, the execution path proceeds to arch__symbols__fixup_end function which fixes up the size of prev symbol by adding page_size to its end offset. Fixes: 3b01a413 ("perf symbols: Improve kallsyms symbol end addr calculation") Signed-off-by:
Michael Petlan <mpetlan@redhat.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Link: http://lore.kernel.org/lkml/20220317135536.805-1-mpetlan@redhat.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Pavel Skripkin authored
commit 5600f698 upstream. Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. There was a check for the number of endpoints, but not for the type of endpoint. Fix it by replacing old desc.bNumEndpoints check with usb_find_common_endpoints() helper for finding endpoints Fail log: usb 5-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Workqueue: usb_hub_wq hub_event ... Call Trace: <TASK> aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830 input_open_device+0x1bb/0x320 drivers/input/input.c:629 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593 Fixes: 8e20cf2b ("Input: aiptek - fix crash on detecting device without endpoints") Reported-and-tested-by: syzbot+75cccf2b7da87fb6f84b@syzkaller.appspotmail.com Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@gmail.com Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Alan Stern authored
commit e9b667a8 upstream. The syzbot fuzzer reported a minor bug in the usbtmc driver: usb 5-1: BOGUS control dir, pipe 80001e80 doesn't match bRequestType 0 WARNING: CPU: 0 PID: 3813 at drivers/usb/core/urb.c:412 usb_submit_urb+0x13a5/0x1970 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 3813 Comm: syz-executor122 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58 #0 ... Call Trace: <TASK> usb_start_wait_urb+0x113/0x530 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x2a5/0x4b0 drivers/usb/core/message.c:153 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1947 [inline] The problem is that usbtmc_ioctl_request() uses usb_rcvctrlpipe() for all of its transfers, whether they are in or out. It's easy to fix. CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+a48e3d1a875240cab5de@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YiEsYTPEE6lOCOA5@rowland.harvard.edu Signed-off-by:
-
Alan Stern authored
commit 16b1941e upstream. The syzbot fuzzer found a use-after-free bug: BUG: KASAN: use-after-free in dev_uevent+0x712/0x780 drivers/base/core.c:2320 Read of size 8 at addr ffff88802b934098 by task udevd/3689 CPU: 2 PID: 3689 Comm: udevd Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 dev_uevent+0x712/0x780 drivers/base/core.c:2320 uevent_show+0x1b8/0x380 drivers/base/core.c:2391 dev_attr_show+0x4b/0x90 drivers/base/core.c:2094 Although the bug manifested in the driver core, the real cause was a race with the gadget core. dev_uevent() does: if (dev->driver) add_uevent_var(env, "DRIVER=%s", dev->driver->name); and between the test and the dereference of dev->driver, the gadget core sets dev->driver to NULL. The race wouldn't occur if the gadget core registered its devices on a real bus, using the standard synchronization techniques of the driver core. However, it's not necessary to make such a large change in order to fix this bug; all we need to do is make sure that udc->dev.driver is always NULL. In fact, there is no reason for udc->dev.driver ever to be set to anything, let alone to the value it currently gets: the address of the gadget's driver. After all, a gadget driver only knows how to manage a gadget, not how to manage a UDC. This patch simply removes the statements in the gadget core that touch udc->dev.driver. Fixes: 2ccea03a ("usb: gadget: introduce UDC Class") CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+348b571beb5eeb70a582@syzkaller.appspotmail.com Signed-off-by:
-
Dan Carpenter authored
commit 65f3324f upstream. If "BufOffset" is very large the "BufOffset + 8" operation can have an integer overflow. Cc: stable@kernel.org Fixes: 38ea1eac ("usb: gadget: rndis: check size of RNDIS_MSG_SET command") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220301080424.GA17208@kili Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 7f34b43e ] The newly introduced TRAMP_VALIAS definition causes a build warning with clang-14: arch/arm64/include/asm/vectors.h:66:31: error: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Werror,-Wnull-pointer-arithmetic] return (char *)TRAMP_VALIAS + SZ_2K * slot; Change the addition to something clang does not complain about. Fixes: bd09128d ("arm64: Add percpu vectors for EL1") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
James Morse <james.morse@arm.com> Link: https://lore.kernel.org/r/20220316183833.1563139-1-arnd@kernel.org Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Miaoqian Lin authored
[ Upstream commit cb0b430b ] The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: 6d4e5c57 ("net: dsa: get port type at parse time") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220316082602.10785-1-linmq006@gmail.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 4ee06de7 ] This kind of interface doesn't have a mac header. This patch fixes bpf_redirect() to a PIM interface. Fixes: 27b29f63 ("bpf: add bpf_redirect() helper") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220315092008.31423-1-nicolas.dichtel@6wind.com Signed-off-by:
-
Marek Vasut authored
[ Upstream commit fc1b6ef7 ] The Innolux G070Y2-L01 supports two modes of operation: 1) FRC=Low/NC ... MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ... BPP=6 2) FRC=High ..... MEDIA_BUS_FMT_RGB888_1X7X4_SPWG ... BPP=8 Currently the panel description mixes both, BPP from 1) and bus format from 2), which triggers a warning at panel-simple.c:615. Pick the later, set bpp=8, fix the warning. Fixes: a5d2ade6 ("drm/panel: simple: Add support for Innolux G070Y2-L01") Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Christoph Fritz <chf.fritz@googlemail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220220040718.532866-1-marex@denx.de Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Jiasheng Jiang authored
[ Upstream commit 886e44c9 ] As the potential failure of the kvmalloc_array(), it should be better to check and restore the 'data' if fails in order to avoid the dereference of the NULL pointer. Fixes: 6ae74671 ("hv_netvsc: Add per-cpu ethtool stats for netvsc") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220314020125.2365084-1-jiasheng@iscas.ac.cn Signed-off-by:
-
Jiasheng Jiang authored
[ Upstream commit 0f74b29a ] As the potential failure of the dma_map_single(), it should be better to check it and return error if fails. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c700525f ] syzbot found that when an AF_PACKET socket is using PACKET_COPY_THRESH and mmap operations, tpacket_rcv() is queueing skbs with garbage in skb->cb[], triggering a too big copy [1] Presumably, users of af_packet using mmap() already gets correct metadata from the mapped buffer, we can simply make sure to clear 12 bytes that might be copied to user space later. BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline] BUG: KASAN: stack-out-of-bounds in packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489 Write of size 165 at addr ffffc9000385fb78 by task syz-executor233/3631 CPU: 0 PID: 3631 Comm: syz-executor233 Not tainted 5.17.0-rc7-syzkaller-02396-g0b366069 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xf/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189 memcpy+0x39/0x60 mm/kasan/shadow.c:66 memcpy include/linux/fortify-string.h:225 [inline] packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fdfd5954c29 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcf8e71e48 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdfd5954c29 RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000005 RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffcf8e71e60 R13: 00000000000f4240 R14: 000000000000c1ff R15: 00007ffcf8e71e54 </TASK> addr ffffc9000385fb78 is located in stack of task syz-executor233/3631 at offset 32 in frame: ____sys_recvmsg+0x0/0x600 include/linux/uio.h:246 this frame has 1 object: [32, 160) 'addr' Memory state around the buggy address: ffffc9000385fa80: 00 04 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 ffffc9000385fb00: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 >ffffc9000385fb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3 ^ ffffc9000385fc00: f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 f1 ffffc9000385fc80: f1 f1 f1 00 f2 f2 f2 00 f2 f2 f2 00 00 00 00 00 ================================================================== Fixes: 0fb375fb ("[AF_PACKET]: Allow for > 8 byte hardware addresses.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220312232958.3535620-1-eric.dumazet@gmail.com Signed-off-by:
-
Kurt Cancemi authored
[ Upstream commit 837d9e49 ] This bug resulted in only the current mode being resumed and suspended when the PHY supported both fiber and copper modes and when the PHY only supported copper mode the fiber mode would incorrectly be attempted to be resumed and suspended. Fixes: 3758be3d ("Marvell phy: add functions to suspend and resume both interfaces: fiber and copper links.") Signed-off-by:
Kurt Cancemi <kurt@x64architecture.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220312201512.326047-1-kurt@x64architecture.com Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 9feaf8b3 ] When "dump_apple_properties" is used on the kernel boot command line, it causes an Unknown parameter message and the string is added to init's argument strings: Unknown kernel command line parameters "dump_apple_properties BOOT_IMAGE=/boot/bzImage-517rc6 efivar_ssdt=newcpu_ssdt", will be passed to user space. Run /sbin/init as init process with arguments: /sbin/init dump_apple_properties with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc6 efivar_ssdt=newcpu_ssdt Similarly when "efivar_ssdt=somestring" is used, it is added to the Unknown parameter message and to init's environment strings, polluting them (see examples above). Change the return value of the __setup functions to 1 to indicate that the __setup options have been handled. Fixes: 58c5475a ("x86/efi: Retrieve and assign Apple device properties") Fixes: 475fb4e8 ("efi / ACPI: load SSTDs from EFI variables") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Ard Biesheuvel <ardb@kernel.org> Cc: linux-efi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Link: https://lore.kernel.org/r/20220301041851.12459-1-rdunlap@infradead.org Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
Joseph Qi authored
commit 7b0b1332 upstream. Once s_root is set, genric_shutdown_super() will be called if fill_super() fails. That means, we will call ocfs2_dismount_volume() twice in such case, which can lead to kernel crash. Fix this issue by initializing filecheck kobj before setting s_root. Link: https://lkml.kernel.org/r/20220310081930.86305-1-joseph.qi@linux.alibaba.com Fixes: 5f483c4a ("ocfs2: add kobject for online file check") Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Brian Masney authored
commit a680b183 upstream. The generate function in struct rng_alg expects that the destination buffer is completely filled if the function returns 0. qcom_rng_read() can run into a situation where the buffer is partially filled with randomness and the remaining part of the buffer is zeroed since qcom_rng_generate() doesn't check the return value. This issue can be reproduced by running the following from libkcapi: kcapi-rng -b 9000000 > OUTFILE The generated OUTFILE will have three huge sections that contain all zeros, and this is caused by the code where the test 'val & PRNG_STATUS_DATA_AVAIL' fails. Let's fix this issue by ensuring that qcom_rng_read() always returns with a full buffer if the function returns success. Let's also have qcom_rng_generate() return the correct value. Here's some statistics from the ent project (https://www.fourmilab.ch/random/ ) that shows information about the quality of the generated numbers: $ ent -c qcom-random-before Value Char Occurrences Fraction 0 606748 0.067416 1 33104 0.003678 2 33001 0.003667 ... 253 � 32883 0.003654 254 � 33035 0.003671 255 � 33239 0.003693 Total: 9000000 1.000000 Entropy = 7.811590 bits per byte. Optimum compression would reduce the size of this 9000000 byte file by 2 percent. Chi square distribution for 9000000 samples is 9329962.81, and randomly would exceed this value less than 0.01 percent of the times. Arithmetic mean value of data bytes is 119.3731 (127.5 = random). Monte Carlo value for Pi is 3.197293333 (error 1.77 percent). Serial correlation coefficient is 0.159130 (totally uncorrelated = 0.0). Without this patch, the results of the chi-square test is 0.01%, and the numbers are certainly not random according to ent's project page. The results improve with this patch: $ ent -c qcom-random-after Value Char Occurrences Fraction 0 35432 0.003937 1 35127 0.003903 2 35424 0.003936 ... 253 � 35201 0.003911 254 � 34835 0.003871 255 � 35368 0.003930 Total: 9000000 1.000000 Entropy = 7.999979 bits per byte. Optimum compression would reduce the size of this 9000000 byte file by 0 percent. Chi square distribution for 9000000 samples is 258.77, and randomly would exceed this value 42.24 percent of the times. Arithmetic mean value of data bytes is 127.5006 (127.5 = random). Monte Carlo value for Pi is 3.141277333 (error 0.01 percent). Serial correlation coefficient is 0.000468 (totally uncorrelated = 0.0). This change was tested on a Nexus 5 phone (msm8974 SoC). Signed-off-by:
Brian Masney <bmasney@redhat.com> Fixes: ceec5f5b ("crypto: qcom-rng - Add Qcom prng driver") Cc: stable@vger.kernel.org # 4.19+ Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Andrew Halaney <ahalaney@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 19 Mar, 2022 16 commits
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220317124527.672236844@linuxfoundation.org Tested-by:
-
James Morse authored
__sdei_asm_trampoline_next_handler shouldn't have its own name as the tramp_data_read_var takes the symbol name, and generates the name for the value in the data page if CONFIG_RANDOMIZE_BASE is clear. This means when CONFIG_RANDOMIZE_BASE is clear, this code won't compile as __sdei_asm_trampoline_next_handler doesn't exist. Use the proper name, and let the macro do its thing. Reported-by:
-
Chengming Zhou authored
[ Upstream commit b773827e ] The error message when I build vm tests on debian10 (GLIBC 2.28): userfaultfd.c: In function `userfaultfd_pagemap_test': userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use in this function); did you mean `MADV_RANDOM'? if (madvise(area_dst, test_pgsize, MADV_PAGEOUT)) ^~~~~~~~~~~~ MADV_RANDOM This patch includes these newer definitions from UAPI linux/mman.h, is useful to fix tests build on systems without these definitions in glibc sys/mman.h. Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.com Signed-off-by:
Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by:
-
Niels Dossche authored
[ Upstream commit f1fb205e ] seqno could be read as a stale value outside of the lock. The lock is already acquired to protect the modification of seqno against a possible race condition. Place the reading of this value also inside this locking to protect it against a possible race condition. Signed-off-by:
Niels Dossche <dossche.niels@gmail.com> Acked-by:
Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit e3d5ea2c ] If recv_actor() returns an incorrect value, tcp_read_sock() might loop forever. Instead, issue a one time warning and make sure to make progress. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Jakub Sitnicki <jakub@cloudflare.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20220302161723.3910001-2-eric.dumazet@gmail.com Signed-off-by:
-
Sreeramya Soratkal authored
[ Upstream commit e50b88c4 ] The wdev channel information is updated post channel switch only for the station mode and not for the other modes. Due to this, the P2P client still points to the old value though it moved to the new channel when the channel change is induced from the P2P GO. Update the bss channel after CSA channel switch completion for P2P client interface as well. Signed-off-by:
Sreeramya Soratkal <quic_ssramya@quicinc.com> Link: https://lore.kernel.org/r/1646114600-31479-1-git-send-email-quic_ssramya@quicinc.com Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Manasi Navare authored
[ Upstream commit 62929726 ] VRR capable property is not attached by default to the connector It is attached only if VRR is supported. So if the driver tries to call drm core set prop function without it being attached that causes NULL dereference. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220225013055.9282-1-manasi.d.navare@intel.com Signed-off-by:
-
Golan Ben Ami authored
[ Upstream commit 1db5fcbb ] Some APs misbehave when TWT is used and cause our firmware to crash. We don't know a reasonable way to detect and work around this problem in the FW yet. To prevent these crashes, disable TWT in the driver by stopping to advertise TWT support. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523 Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> [reworded the commit message] Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fi Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit d4e26aae ] The function ioremap() in fs_init() can fail, so its return value should be checked. Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Lad Prabhakar authored
[ Upstream commit c5048a7b ] Register the CAN device only when all the necessary initialization is completed. This patch makes sure all the data structures and locks are initialized before registering the CAN device. Link: https://lore.kernel.org/all/20220221225935.12300-1-prabhakar.mahadev-lad.rj@bp.renesas.com Reported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Julian Braha authored
[ Upstream commit 11c57c3b ] Resending this to properly add it to the patch tracker - thanks for letting me know, Arnd :) When ARM is enabled, and BITREVERSE is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for HAVE_ARCH_BITREVERSE Depends on [n]: BITREVERSE [=n] Selected by [y]: - ARM [=y] && (CPU_32v7M [=n] || CPU_32v7 [=y]) && !CPU_32v6 [=n] This is because ARM selects HAVE_ARCH_BITREVERSE without selecting BITREVERSE, despite HAVE_ARCH_BITREVERSE depending on BITREVERSE. This unmet dependency bug was found by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by:
Julian Braha <julianbraha@gmail.com> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Alexander Lobakin authored
[ Upstream commit f2703def ] After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle), 2-core 2-thread-per-core interAptiv (CPS-driven) started emitting the following: [ 0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi)) [ 0.048183] ------------[ cut here ]------------ [ 0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240 [ 0.048220] Modules linked in: [ 0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35 b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f [ 0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1 [ 0.048278] 830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000 [ 0.048307] 00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000 [ 0.048334] 00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34 [ 0.048361] 817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933 [ 0.048389] ... [ 0.048396] Call Trace: [ 0.048399] [<8105a7bc>] show_stack+0x3c/0x140 [ 0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80 [ 0.048440] [<8108b5c0>] __warn+0xc0/0xf4 [ 0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c [ 0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240 [ 0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80 [ 0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140 [ 0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140 [ 0.048523] [<8106593c>] start_secondary+0xbc/0x280 [ 0.048539] [ 0.048543] ---[ end trace 0000000000000000 ]--- [ 0.048636] Synchronize counters for CPU 1: done. ...for each but CPU 0/boot. Basic debug printks right before the mentioned line say: [ 0.048170] CPU: 1, smt_mask: So smt_mask, which is sibling mask obviously, is empty when entering the function. This is critical, as sched_core_cpu_starting() calculates core-scheduling parameters only once per CPU start, and it's crucial to have all the parameters filled in at that moment (at least it uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on MIPS). A bit of debugging led me to that set_cpu_sibling_map() performing the actual map calculation, was being invocated after notify_cpu_start(), and exactly the latter function starts CPU HP callback round (sched_core_cpu_starting() is basically a CPU HP callback). While the flow is same on ARM64 (maps after the notifier, although before calling set_cpu_online()), x86 started calculating sibling maps earlier than starting the CPU HP callbacks in Linux 4.14 (see [0] for the reference). Neither me nor my brief tests couldn't find any potential caveats in calculating the maps right after performing delay calibration, but the WARN splat is now gone. The very same debug prints now yield exactly what I expected from them: [ 0.048433] CPU: 1, smt_mask: 0-1 [0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef Signed-off-by:
Alexander Lobakin <alobakin@pm.me> Reviewed-by:
Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit a6bce782 ] If an MFP station isn't authorized, the receiver will (or at least should) drop the action frame since it's a robust management frame, but if we're not authorized we haven't installed keys yet. Refuse attempts to start a session as they'd just time out. Signed-off-by:
-
Corentin Labbe authored
[ Upstream commit 3916c361 ] crypto-controller had a typo, fix it. In the same time, rename it to just crypto Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Sascha Hauer authored
[ Upstream commit be4e65bd ] The binding specifies the clock order to "iahb", "isfr", "cec". Reorder the clocks accordingly. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220210142353.3420859-1-s.hauer@pengutronix.de Signed-off-by:
-
Dinh Nguyen authored
[ Upstream commit 268a491a ] The DWC2 USB controller on the Agilex platform does not support clock gating, so use the chip specific "intel,socfpga-agilex-hsotg" compatible. Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
