- 25 Mar, 2020 40 commits
-
-
Alexandru Tachici authored
commit cb2116ff upstream. Data stored in the iio-buffer is BE and this should be specified in the iio_chan_spec struct. Fixes: f4f55ce3 ("iio:adxl372: Add FIFO and interrupts support") Signed-off-by:
Alexandru Tachici <alexandru.tachici@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabrice Gasnier authored
commit 29e8c825 upstream. Master mode should be disabled when stopping. This mainly impacts possible other use-case after timer has been stopped. Currently, master mode remains set (from start routine). Fixes: 6fb34812 ("iio: stm32 trigger: Add support for TRGO2 triggers") Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Wen-chien Jesse Sung authored
commit e43d110c upstream. According to ST, the HID is for LIS2DH12. Fixes: 3d56e198 ("iio: accel: st_accel: Add support for the SMO8840 ACPI id") Signed-off-by:
Wen-chien Jesse Sung <jesse.sung@canonical.com> Tested-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Petr Štetiar authored
commit 016a8845 upstream. SPS30 uses triggered buffer, but the dependency is not specified in the Kconfig file. Fix this by selecting IIO_BUFFER and IIO_TRIGGERED_BUFFER config symbols. Cc: stable@vger.kernel.org Fixes: 232e0f6d ("iio: chemical: add support for Sensirion SPS30 sensor") Signed-off-by:
Petr Štetiar <ynezz@true.cz> Signed-off-by:
-
Eric Biggers authored
commit 6e622cd8 upstream. Commit 77654350 ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start checking for the presence of the ->set_serial function pointer rather than ->get_serial. This appears to be a copy-and-paste error, since ->get_serial is the function pointer that is called as well as the pointer that is checked by the non-compat version of TIOCGSERIAL. Fix this by checking the correct function pointer. Fixes: 77654350 ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200224182044.234553-3-ebiggers@kernel.org Signed-off-by:
-
Eric Biggers authored
commit 17329563 upstream. Commit 77654350 ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start copying a whole 'serial_struct32' to userspace rather than individual fields, but failed to initialize all padding and fields -- namely the hole after the 'iomem_reg_shift' field, and the 'reserved' field. Fix this by initializing the struct to zero. [v2: use sizeof, and convert the adjacent line for consistency.] Reported-by: syzbot+8da9175e28eadcb203ce@syzkaller.appspotmail.com Fixes: 77654350 ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by:
-
Takashi Iwai authored
commit 5461e053 upstream. The return value checks in snd_pcm_plug_alloc() are covered with snd_BUG_ON() macro that may trigger a kernel WARNING depending on the kconfig. But since the error condition can be triggered by a weird user space parameter passed to OSS layer, we shouldn't give the kernel stack trace just for that. As it's a normal error condition, let's remove snd_BUG_ON() macro usage there. Reported-by: syzbot+2a59ee7a9831b264f45e@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312155730.7520-1-tiwai@suse.de Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit f2ecf903 upstream. Each OSS PCM plugins allocate its internal buffer per pre-calculation of the max buffer size through the chain of plugins (calling src_frames and dst_frames callbacks). This works for most plugins, but the rate plugin might behave incorrectly. The calculation in the rate plugin involves with the fractional position, i.e. it may vary depending on the input position. Since the buffer size pre-calculation is always done with the offset zero, it may return a shorter size than it might be; this may result in the out-of-bound access as spotted by fuzzer. This patch addresses those possible buffer overflow accesses by simply setting the upper limit per the given buffer size for each plugin before src_frames() and after dst_frames() calls. Reported-by: syzbot+e1fe9f44fb8ecf4fb5dd@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000b25ea005a02bcf21@google.com Link: https://lore.kernel.org/r/20200309082148.19855-1-tiwai@suse.de Signed-off-by:
-
Takashi Iwai authored
commit 6c3171ef upstream. This is a similar bug like the previous case for virmidi: the invalid running status is kept after receiving a sysex message. Again the fix is to clear the running status after handling the sysex. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de Link: https://lore.kernel.org/r/20200316090506.23966-3-tiwai@suse.de Signed-off-by:
-
Takashi Iwai authored
commit 4384f167 upstream. The virmidi driver handles sysex event exceptionally in a short-cut snd_seq_dump_var_event() call, but this missed the reset of the running status. As a result, it may lead to an incomplete command right after the sysex when an event with the same running status was queued. Fix it by clearing the running status properly via alling snd_midi_event_reset_decode() for that code path. Reported-by:
Andreas Steinmetz <ast@domdv.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de Link: https://lore.kernel.org/r/20200316090506.23966-2-tiwai@suse.de Signed-off-by:
-
Jian-Hong Pan authored
commit a124458a upstream. A headset on the desktop like Acer N50-600 does not work, until quirk ALC662_FIXUP_ACER_NITRO_HEADSET_MODE is applied. Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200317082806.73194-3-jian-hong@endlessm.com Signed-off-by:
-
Jian-Hong Pan authored
commit d858c706 upstream. The Acer desktop X2660G with ALC662 can't detect the headset microphone until ALC662_FIXUP_ACER_X2660G_HEADSET_MODE quirk applied. Signed-off-by:
-
Takashi Iwai authored
commit d683469b upstream. The MIDI input event parser of the LINE6 driver may enter into an endless loop when the unexpected data sequence is given, as it tries to continue the secondary bytes without termination. Also, when the input data is too short, the parser returns a negative error, while the caller doesn't handle it properly. This would lead to the unexpected behavior as well. This patch addresses those issues by checking the return value correctly and handling the one-byte event in the parser properly. The bug was reported by syzkaller. Reported-by: syzbot+cce32521ee0a824c21f7@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000033087059f8f8fa3@google.com Link: https://lore.kernel.org/r/20200309095922.30269-1-tiwai@suse.de Signed-off-by:
-
Anthony Mallet authored
commit b401f8c4 upstream. By default, tty_port_init() initializes those parameters to a multiple of HZ. For instance in line 69 of tty_port.c: port->close_delay = (50 * HZ) / 100; https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69 With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04 linux-image-4.15.0-37-generic), the default setting for close_delay is thus 125. When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then executed with the same setting '12', the value is interpreted as '120' which is different from the current setting and a EPERM error may be raised by set_serial_info() if !CAP_SYS_ADMIN. https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919 Fixes: ba2d8ce9 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)") Signed-off-by:
Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312133101.7096-2-anthony.mallet@laas.fr Signed-off-by:
-
Anthony Mallet authored
commit 633e2b2d upstream. close_delay and closing_wait are specified in hundredth of a second but stored internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies() functions to convert from each other. Signed-off-by:
-
Heikki Krogerus authored
commit 081da132 upstream. Locking the connector in ucsi_register_displayport() to make sure that nothing can access the displayport alternate mode before the function has finished and the alternate mode is actually ready. Fixes: af8622f6 ("usb: typec: ucsi: Support for DisplayPort alt mode") Cc: stable@vger.kernel.org Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200311130006.41288-3-heikki.krogerus@linux.intel.com Signed-off-by:
-
Heikki Krogerus authored
commit d16e7b62 upstream. If the registration of the DisplayPort was not successful, or if the port does not support DisplayPort alt mode in the first place, the function ucsi_displayport_remove_partner() will fail with NULL pointer dereference when it attempts to access the driver data. Adding a check to the function to make sure there really is driver data for the device before modifying it. Fixes: af8622f6 ("usb: typec: ucsi: Support for DisplayPort alt mode") Reported-by:
Andrea Gagliardi La Gala <andrea.lagala@gmail.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206365 Cc: stable@vger.kernel.org Signed-off-by:
-
Alberto Mattea authored
commit 16263abc upstream. This controller timeouts during suspend (S3) with [ 240.521724] xhci_hcd 0000:30:00.3: WARN: xHC save state timeout [ 240.521729] xhci_hcd 0000:30:00.3: ERROR mismatched command completion event thus preventing the system from entering S3. Moreover it remains in an undefined state where some connected devices stop working until a reboot. Apply the XHCI_SUSPEND_DELAY quirk to make it suspend properly. CC: stable@vger.kernel.org Signed-off-by:
Alberto Mattea <alberto@mattea.info> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200306150858.21904-3-mathias.nyman@linux.intel.com Signed-off-by:
-
Scott Chen authored
commit cecc113c upstream. Add a device id for HP LD381 Display LD381: 03f0:0f7f Signed-off-by:
Scott Chen <scott@labau.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Ran Wang authored
commit b433e340 upstream. When loading new kernel via kexec, we need to shutdown host controller to avoid any un-expected memory accessing during new kernel boot. Signed-off-by:
Ran Wang <ran.wang_1@nxp.com> Cc: stable <stable@vger.kernel.org> Tested-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200306092328.41253-1-ran.wang_1@nxp.com Signed-off-by:
-
Daniele Palmas authored
commit 8e852a79 upstream. Add ME910G1 ECM composition 0x110b: tty, tty, tty, ecm Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20200304104310.2938-1-dnlplm@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 75d7676e upstream. We have been receiving bug reports that ethernet connections over RTL8153 based ethernet adapters stops working after a while with errors like these showing up in dmesg when the ethernet stops working: [12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout [12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout [12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1 docks and with generic USB to ethernet dongles using the RTL8153 chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to the kernel commandline and all users who have tried this report that this fixes this. Also note that we already have an existing NO_LPM quirk for the RTL8153 used in the Microsoft Surface Dock (where it uses a different usb-id). This commit adds a NO_LPM quirk for the generic Realtek RTL8153 0bda:8153 usb-id, fixing the Tx timeout errors on these devices. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198931 Cc: stable@vger.kernel.org Cc: russianneuromancer@ya.ru Signed-off-by:
-
Kai-Heng Feng authored
commit b63e48fb upstream. Realtek Hub (0bda:0x0487) used in Dell Dock WD19 sometimes drops off the bus when bringing underlying ports from U3 to U0. Disabling LPM on the hub during setting link state is not enough, so let's disable LPM completely for this hub. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200205112633.25995-3-kai.heng.feng@canonical.com Signed-off-by:
-
Sasha Levin authored
[ Upstream commit f053c83a ] This reverts commit f25c7a00 ("drm/fbdev: Fallback to non tiled mode if all tiles not present"). The commit causes flip done timeouts in CI. Below are the sample errors thrown in logs: [IGT] core_getversion: executing [IGT] core_getversion: exiting, ret=0 Setting dangerous option reset - tainting kernel drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out drm:drm_atomic_helper_wait_for_dependencies] ERROR [PLANE:92:plane 1B] flip_done timed out [drm:drm_atomic_helper_wait_for_flip_done] ERROR [CRTC:152:pipe B] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] ERROR [PLANE:92:plane 1B] flip_done timed out [drm:drm_atomic_helper_wait_for_flip_done] ERROR [CRTC:152:pipe B] flip_done timed out Console: switching to colour frame buffer device 480x135 [drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out Reverting the change for now to unblock CI execution. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Fixes: f25c7a00 ("drm/fbdev: Fallback to non tiled mode if all tiles not present") Closes: https://gitlab.freedesktop.org/drm/intel/issues/6 Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191123091840.32382-1-uma.shankar@intel.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christian Brauner authored
[ Upstream commit 211b64e4 ] Binderfs binder-control devices are cleaned up via binderfs_evict_inode too() which will use refcount_dec_and_test(). However, we missed to set the refcount for binderfs binder-control devices and so we underflowed when the binderfs instance got unmounted. Pretty obvious oversight and should have been part of the more general UAF fix. The good news is that having test cases (suprisingly) helps. Technically, we could detect that we're about to cleanup the binder-control dentry in binderfs_evict_inode() and then simply clean it up. But that makes the assumption that the binder driver itself will never make use of a binderfs binder-control device after the binderfs instance it belongs to has been unmounted and the superblock for it been destroyed. While it is unlikely to ever come to this let's be on the safe side. Performance-wise this also really doesn't matter since the binder-control devic...
-
Jonathan Neuschäfer authored
[ Upstream commit 611d61f9 ] This makes the script more convenient to run. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Carlo Nonato authored
[ Upstream commit 14afc593 ] The bfq_find_set_group() function takes as input a blkcg (which represents a cgroup) and retrieves the corresponding bfq_group, then it updates the bfq internal group hierarchy (see comments inside the function for why this is needed) and finally it returns the bfq_group. In the hierarchy update cycle, the pointer holding the correct bfq_group that has to be returned is mistakenly used to traverse the hierarchy bottom to top, meaning that in each iteration it gets overwritten with the parent of the current group. Since the update cycle stops at root's children (depth = 2), the overwrite becomes a problem only if the blkcg describes a cgroup at a hierarchy level deeper than that (depth > 2). In this case the root's child that happens to be also an ancestor of the correct bfq_group is returned. The main consequence is that processes contained in a cgroup at depth greater than 2 are wrongly placed in the group described above by BFQ. This commits fixes this problem by using a different bfq_group pointer in the update cycle in order to avoid the overwrite of the variable holding the original group reference. Reported-by:
Kwon Je Oh <kwonje.oh2@gmail.com> Signed-off-by:
Carlo Nonato <carlo.nonato95@gmail.com> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Dongli Zhang authored
[ Upstream commit 8130b9d5 ] This patch adds the barrier to guarantee that req->err is always updated before req->state. Otherwise, read_reply() would not return ERR_PTR(req->err) but req->body, when process_writes()->xb_write() is failed. Signed-off-by:
Dongli Zhang <dongli.zhang@oracle.com> Link: https://lore.kernel.org/r/20200303221423.21962-2-dongli.zhang@oracle.com Reviewed-by:
Julien Grall <jgrall@amazon.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Dongli Zhang authored
[ Upstream commit 1b6a51e8 ] The req->body should be updated before req->state is updated and the order should be guaranteed by a barrier. Otherwise, read_reply() might return req->body = NULL. Below is sample callstack when the issue is reproduced on purpose by reordering the updates of req->body and req->state and adding delay in code between updates of req->state and req->body. [ 22.356105] general protection fault: 0000 [#1] SMP PTI [ 22.361185] CPU: 2 PID: 52 Comm: xenwatch Not tainted 5.5.0xen+ #6 [ 22.366727] Hardware name: Xen HVM domU, BIOS ... [ 22.372245] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60 ... ... [ 22.392163] RSP: 0018:ffffb2d64023fdf0 EFLAGS: 00010246 [ 22.395933] RAX: 0000000000000000 RBX: 75746e7562755f6d RCX: 0000000000000000 [ 22.400871] RDX: 0000000000000000 RSI: ffffb2d64023fdfc RDI: 75746e7562755f6d [ 22.405874] RBP: 0000000000000000 R08: 00000000000001e8 R09: 0000000000cdcdcd [ 22.410945] R10: ffffb2d6402ffe00 R11: ffff9d95395eaeb0 R12: ffff9d9535935000 [ 22.417613] R13: ffff9d9526d4a000 R14: ffff9d9526f4f340 R15: ffff9d9537654000 [ 22.423726] FS: 0000000000000000(0000) GS:ffff9d953bc80000(0000) knlGS:0000000000000000 [ 22.429898] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.434342] CR2: 000000c4206a9000 CR3: 00000001ea3fc002 CR4: 00000000001606e0 [ 22.439645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 22.444941] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 22.450342] Call Trace: [ 22.452509] simple_strtoull+0x27/0x70 [ 22.455572] xenbus_transaction_start+0x31/0x50 [ 22.459104] netback_changed+0x76c/0xcc1 [xen_netfront] [ 22.463279] ? find_watch+0x40/0x40 [ 22.466156] xenwatch_thread+0xb4/0x150 [ 22.469309] ? wait_woken+0x80/0x80 [ 22.472198] kthread+0x10e/0x130 [ 22.474925] ? kthread_park+0x80/0x80 [ 22.477946] ret_from_fork+0x35/0x40 [ 22.480968] Modules linked in: xen_kbdfront xen_fbfront(+) xen_netfront xen_blkfront [ 22.486783] ---[ end trace a9222030a747c3f7 ]--- [ 22.490424] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60 The virt_rmb() is added in the 'true' path of test_reply(). The "while" is changed to "do while" so that test_reply() is used as a read memory barrier. Signed-off-by:
-
Josip Pavic authored
[ Upstream commit a0275dfc ] [Why] Swath sizes are being calculated incorrectly. The horizontal swath size should be the product of block height, viewport width, and bytes per element, but the calculation uses viewport height instead of width. The vertical swath size is similarly incorrectly calculated. The effect of this is that we report the wrong DCC caps. [How] Use viewport width in the horizontal swath size calculation and viewport height in the vertical swath size calculation. Signed-off-by:
Josip Pavic <Josip.Pavic@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Bhawanpreet Lakha authored
[ Upstream commit 5ac7fd2f ] [Why] If we have a single MST display and we disconnect it, we dont disable that link. This causes the old link settings to still exist Now on a replug for MST we think its a link loss and will try to reallocate mst payload which will fail, throwing warning below. [ 129.374192] [drm] Failed to updateMST allocation table forpipe idx:0 [ 129.374206] ------------[ cut here ]------------ [ 129.374284] WARNING: CPU: 14 PID: 1710 at drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc_link.c:3153 dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374285] Modules linked in: amdgpu(OE) amd_iommu_v2 gpu_sched ttm drm_kms_helper drm fb_sys_fops syscopyarea sysfillrect sysimgblt binfmt_misc nls_iso8859_1 edac_mce_amd snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio kvm snd_hda_codec_hdmi snd_hda_intel snd_intel_nhlt snd_hda_codec irqbypass snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq crc32_pclmul ghash_clmulni_intel snd_seq_device snd_timer snd aesni_intel eeepc_wmi crypto_simd asus_wmi joydev cryptd sparse_keymap input_leds soundcore video glue_helper wmi_bmof mxm_wmi k10temp ccp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid igb i2c_algo_bit ahci dca i2c_piix4 libahci gpio_amdpt wmi gpio_generic [ 129.374318] CPU: 14 PID: 1710 Comm: kworker/14:2 Tainted: G W OE 5.4.0-rc7bhawan+ #480 [ 129.374318] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0515 03/30/2017 [ 129.374397] Workqueue: events dm_irq_work_func [amdgpu] [ 129.374468] RIP: 0010:dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374470] Code: 52 20 e8 1c 63 ad f4 48 8b 5d d0 65 48 33 1c 25 28 00 00 00 b8 01 00 00 00 75 16 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b e9 fa fe ff ff e8 ed 5b d6 f3 41 0f b6 b6 c4 02 00 00 48 c7 [ 129.374471] RSP: 0018:ffff9f9141e7fcc0 EFLAGS: 00010246 [ 129.374472] RAX: 0000000000000000 RBX: ffff91ef0762f800 RCX: 0000000000000000 [ 129.374473] RDX: 0000000000000005 RSI: ffffffffc0c4a988 RDI: 0000000000000004 [ 129.374474] RBP: ffff9f9141e7fd10 R08: 0000000000000005 R09: 0000000000000000 [ 129.374475] R10: 0000000000000002 R11: 0000000000000001 R12: ffff91eebd510c00 [ 129.374475] R13: ffff91eebd510e58 R14: ffff91ef052c01b8 R15: 0000000000000006 [ 129.374476] FS: 0000000000000000(0000) GS:ffff91ef0ef80000(0000) knlGS:0000000000000000 [ 129.374477] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 129.374478] CR2: 000055623ea01d50 CR3: 0000000408a8c000 CR4: 00000000003406e0 [ 129.374479] Call Trace: [ 129.374550] dc_link_reallocate_mst_payload+0x12e/0x150 [amdgpu] [ 129.374617] dc_link_handle_hpd_rx_irq+0x6d4/0x6e0 [amdgpu] [ 129.374693] handle_hpd_rx_irq+0x77/0x310 [amdgpu] [ 129.374768] dm_irq_work_func+0x53/0x70 [amdgpu] [ 129.374774] process_one_work+0x1fd/0x3f0 [ 129.374776] worker_thread+0x255/0x410 [ 129.374778] kthread+0x121/0x140 [ 129.374780] ? process_one_work+0x3f0/0x3f0 [ 129.374781] ? kthread_park+0x90/0x90 [ 129.374785] ret_from_fork+0x22/0x40 [How] when we disable MST we should clear the cur link settings (lane_count=0 is good enough). This will cause us to not reallocate payloads earlier than expected and not throw the warning Signed-off-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by:
Hersen Wu <hersenxs.wu@amd.com> Acked-by:
-
Yintian Tao authored
[ Upstream commit 2ab7e274 ] The TDR will be randomly failed due to compute ring test failure. If the compute ring wptr & 0x7ff(ring_buf_mask) is 0x100 then after map mqd the compute ring rptr will be synced with 0x100. And the ring test packet size is also 0x100. Then after invocation of amdgpu_ring_commit, the cp will not really handle the packet on the ring buffer because rptr is equal to wptr. Signed-off-by:
Yintian Tao <yttao@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Monk Liu <Monk.Liu@amd.com> Signed-off-by:
-
Alexandre Ghiti authored
[ Upstream commit a160eed4 ] When looking for the memblock where the kernel lives, we should check that the memory range associated to the memblock entirely comprises the kernel image and not only intersects with it. Signed-off-by:
Alexandre Ghiti <alex@ghiti.fr> Reviewed-by:
Anup Patel <anup@brainfault.org> Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by:
-
Damien Le Moal authored
[ Upstream commit aa273420 ] Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for a nommu kernel. Since the sparsemem model does not make sense anyway for the nommu case, do not allow selecting this option to always use the flatmem model. Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
-
Aaro Koskinen authored
[ Upstream commit f9981d4f ] Some error paths leave the bus id allocated. As a result the IDR allocation will fail after a deferred probe. Fix by freeing the bus id always on error. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Message-Id: <20200304111740.27915-1-aaro.koskinen@nokia.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Olivier Moysan authored
[ Upstream commit 0d6defc7 ] The commit e894efef ("ASoC: core: add support to card rebind") allows to rebind the sound card after a rebind of one of its component. With this commit, the sound card is actually rebound, but may be no more functional. The following problems have been seen with STM32 SAI driver. 1) DMA channel is not requested: With the sound card rebind the simplified call sequence is: stm32_sai_sub_probe snd_soc_register_component snd_soc_try_rebind_card snd_soc_instantiate_card devm_snd_dmaengine_pcm_register The problem occurs because the pcm must be registered, before snd_soc_instantiate_card() is called. Modify SAI driver, to change the call sequence as follows: stm32_sai_sub_probe devm_snd_dmaengine_pcm_register snd_soc_register_component snd_soc_try_rebind_card 2) DMA channel is not released: dma_release_channel() is not called when devm_dmaengine_pcm_release() is executed. This occurs because SND_DMAENGINE_PCM_DRV_NAME component, has already been released through devm_component_release(). devm_dmaengine_pcm_release() should be called before devm_component_release() to avoid this problem. Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component() explicitly from SAI driver, to have the right sequence. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Message-Id: <20200304102406.8093-1-olivier.moysan@st.com> Signed-off-by:
-
Vincent Chen authored
[ Upstream commit 0cff8bff ] The compiler uses the PIC-relative method to access static variables instead of GOT when the code model is PIC. Therefore, the limitation of the access range from the instruction to the symbol address is +-2GB. Under this circumstance, the kernel cannot load a kernel module if this module has static per-CPU symbols declared by DEFINE_PER_CPU(). The reason is that kernel relocates the .data..percpu section of the kernel module to the end of kernel's .data..percpu. Hence, the distance between the per-CPU symbols and the instruction will exceed the 2GB limits. To solve this problem, the kernel should place the loaded module in the memory area [&_end-2G, VMALLOC_END]. Signed-off-by:
Vincent Chen <vincent.chen@sifive.com> Suggested-by:
Carlos de Paula <me@carlosedp.com> Signed-off-by:
-
Mike Snitzer authored
[ Upstream commit 248aa264 ] In cases where dec_in_flight() has to requeue the integrity_bio_wait work to transfer the rest of the data, the bio's __bi_remaining might already have been decremented to 0, e.g.: if bio passed to underlying data device was split via blk_queue_split(). Use dm_bio_{record,restore} rather than effectively open-coding them in dm-integrity -- these methods now manage __bi_remaining too. Depends-on: f7f0b057a9c1 ("dm bio record: save/restore bi_end_io and bi_integrity") Reported-by:
Daniel Glöckner <dg@emlix.com> Suggested-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mike Snitzer authored
[ Upstream commit 1b17159e ] Also, save/restore __bi_remaining in case the bio was used in a BIO_CHAIN (e.g. due to blk_queue_split). Suggested-by:
-
Daniel Axtens authored
[ Upstream commit 3745488e ] altera_get_note is called from altera_init, where key is kzalloc(33). When the allocation functions are annotated to allow the compiler to see the sizes of objects, and with FORTIFY_SOURCE, we see: In file included from drivers/misc/altera-stapl/altera.c:14:0: In function ‘strlcpy’, inlined from ‘altera_init’ at drivers/misc/altera-stapl/altera.c:2189:5: include/linux/string.h:378:4: error: call to ‘__write_overflow’ declared with attribute error: detected write beyond size of object passed as 1st parameter __write_overflow(); ^~~~~~~~~~~~~~~~~~ That refers to this code in altera_get_note: if (key != NULL) strlcpy(key, &p[note_strings + get_unaligned_be32( &p[note_table + (8 * i)])], length); The error triggers because the length of 'key' is 33, but the copy uses length supplied as the 'length' parameter, which is always 256. Split the size parameter into key_len and val_len, and use the appropriate length depending on what is being copied. Detected by compiler error, only compile-tested. Cc: "Igor M. Liplianin" <liplianin@netup.ru> Signed-off-by:
Daniel Axtens <dja@axtens.net> Link: https://lore.kernel.org/r/20200120074344.504-2-dja@axtens.net Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/202002251042.D898E67AC@keescook Signed-off-by:
-
