- 03 Sep, 2020 40 commits
-
-
qiuguorui1 authored
commit e579076a upstream. In the current code, when the eoi callback of the exti clears the pending bit of the current interrupt, it will first read the values of fpr and rpr, then logically OR the corresponding bit of the interrupt number, and finally write back to fpr and rpr. We found through experiments that if two exti interrupts, we call them int1/int2, arrive almost at the same time. in our scenario, the time difference is 30 microseconds, assuming int1 is triggered first. there will be an extreme scenario: both int's pending bit are set to 1, the irq handle of int1 is executed first, and eoi handle is then executed, at this moment, all pending bits are cleared, but the int 2 has not finally been reported to the cpu yet, which eventually lost int2. According to stm32's TRM description about rpr and fpr: Writing a 1 to this bit will trigger a rising edge event on event x, Writing 0 has no effect. Therefore, when clearing the pending bit, we only need to clear the pending bit of the irq. Fixes: 927abfc4 ("irqchip/stm32: Add stm32mp1 support with hierarchy domain") Signed-off-by:
qiuguorui1 <qiuguorui1@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org # v4.18+ Link: https://lore.kernel.org/r/20200820031629.15582-1-qiuguorui1@huawei.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 784a0830 upstream. Most of the CPU mask operations behave the same way, but for_each_cpu() and it's variants ignore the cpumask argument and claim that CPU0 is always in the mask. This is historical, inconsistent and annoying behaviour. The matrix allocator uses for_each_cpu() and can be called on UP with an empty cpumask. The calling code does not expect that this succeeds but until commit e027ffff ("x86/irq: Unbreak interrupt affinity setting") this went unnoticed. That commit added a WARN_ON() to catch cases which move an interrupt from one vector to another on the same CPU. The warning triggers on UP. Add a check for the cpumask being empty to prevent this. Fixes: 2f75d9e1 ("genirq: Implement bitmap matrix allocator") Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
-
M. Vefa Bicakci authored
commit 7a2f2974 upstream. Commit 88b7381a ("USB: Select better matching USB drivers when available") introduced the use of a "match" function to select a non-generic/better driver for a particular USB device. This unfortunately breaks the operation of usbip in general, as reported in the kernel bugzilla with bug 208267 (linked below). Upon inspecting the aforementioned commit, one can observe that the original code in the usb_device_match function used to return 1 unconditionally, but the aforementioned commit makes the usb_device_match function use identifier tables and "match" virtual functions, if either of them are available. Hence, this commit implements a match function for usbip that unconditionally returns true to ensure that usbip is functional again. This change has been verified to restore usbip functionality, with a v5.7.y kernel on an up-to-date version of Qubes OS 4.0, which uses usbip to redirect USB devices between VMs. Thanks to Jonathan Dieter for the effort in bisecting this issue down to the aforementioned commit. Fixes: 88b7381a ("USB: Select better matching USB drivers when available") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208267 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1856443 Link: https://github.com/QubesOS/qubes-issues/issues/5905 Signed-off-by:
M. Vefa Bicakci <m.v.b@runbox.com> Cc: <stable@vger.kernel.org> # 5.7 Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Reviewed-by:
Bastien Nocera <hadess@hadess.net> Reviewed-by:
Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20200810160017.46002-1-m.v.b@runbox.com Signed-off-by:
-
Herbert Xu authored
commit c195d66a upstream. The iwd daemon uses libell which sets up the skcipher operation with two separate control messages. As the first control message is sent without MSG_MORE, it is interpreted as an empty request. While libell should be fixed to use MSG_MORE where appropriate, this patch works around the bug in the kernel so that existing binaries continue to work. We will print a warning however. A separate issue is that the new kernel code no longer allows the control message to be sent twice within the same request. This restriction is obviously incompatible with what iwd was doing (first setting an IV and then sending the real control message). This patch changes the kernel so that this is explicitly allowed. Reported-by:
Caleb Jorden <caljorden@hotmail.com> Fixes: f3c802a1 ("crypto: algif_aead - Only wake up when...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@go...
-
Heikki Krogerus authored
commit c15e1bdd upstream. When the primary firmware node pointer is removed from a device (set to NULL) the secondary firmware node pointer, when it exists, is made the primary node for the device. However, the secondary firmware node pointer of the original primary firmware node is never cleared (set to NULL). To avoid situation where the secondary firmware node pointer is pointing to a non-existing object, clearing it properly when the primary node is removed from a device in set_primary_fwnode(). Fixes: 97badf87 ("device property: Make it possible to use secondary firmware nodes") Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Alexey Kardashevskiy authored
commit b460b512 upstream. The bhrb_filter_map ("The Branch History Rolling Buffer") callback is only defined in raw CPUs' power_pmu structs. The "architected" CPUs use generic_compat_pmu, which does not have this callback, and crashes occur if a user tries to enable branch stack for an event. This add a NULL pointer check for bhrb_filter_map() which behaves as if the callback returned an error. This does not add the same check for config_bhrb() as the only caller checks for cpuhw->bhrb_users which remains zero if bhrb_filter_map==0. Fixes: be80e758 ("powerpc/perf: Add generic compat mode pmu driver") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200602025612.62707-1-aik@ozlabs.ru Signed-off-by:
-
Christophe Leroy authored
commit 4a133eb3 upstream. low_sleep_handler() can't restore the context from virtual stack because the stack can hardly be accessed with MMU OFF. For now, disable VMAP stack when CONFIG_ADB_PMU is selected. Fixes: cd08f109 ("powerpc/32s: Enable CONFIG_VMAP_STACK") Cc: stable@vger.kernel.org # v5.6+ Reported-by:
Giuseppe Sacco <giuseppe@sguazz.it> Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Rafael J. Wysocki authored
commit e3eb6e8f upstream. It has been reported that system-wide suspend may be aborted in the absence of any wakeup events due to unforseen interactions of it with the runtume PM framework. One failing scenario is when there are multiple devices sharing an ACPI power resource and runtime-resume needs to be carried out for one of them during system-wide suspend (for example, because it needs to be reconfigured before the whole system goes to sleep). In that case, the runtime-resume of that device involves turning the ACPI power resource "on" which in turn causes runtime-resume requests to be queued up for all of the other devices sharing it. Those requests go to the runtime PM workqueue which is frozen during system-wide suspend, so they are not actually taken care of until the resume of the whole system, but the pm_runtime_barrier() call in __device_suspend() sees them and triggers system wakeup events for them which then cause the system-wide suspend to be aborted if wakeup source objects are in active use. Of course, the logic that leads to triggering those wakeup events is questionable in the first place, because clearly there are cases in which a pending runtime resume request for a device is not connected to any real wakeup events in any way (like the one above). Moreover, it is racy, because the device may be resuming already by the time the pm_runtime_barrier() runs and so if the driver doesn't take care of signaling the wakeup event as appropriate, it will be lost. However, if the driver does take care of that, the extra pm_wakeup_event() call in the core is redundant. Accordingly, drop the conditional pm_wakeup_event() call fron __device_suspend() and make the latter call pm_runtime_barrier() alone. Also modify the comment next to that call to reflect the new code and extend it to mention the need to avoid unwanted interactions between runtime PM and system-wide device suspend callbacks. Fixes: 1e2ef05b ("PM: Limit race conditions between runtime PM and system sleep (v2)") Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Utkarsh H Patel <utkarsh.h.patel@intel.com> Tested-by:
Pengfei Xu <pengfei.xu@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Frank van der Linden authored
commit 5d28ba5f upstream. vdso32 should only be installed if CONFIG_COMPAT_VDSO is enabled, since it's not even supposed to be compiled otherwise, and arm64 builds without a 32bit crosscompiler will fail. Fixes: 8d75785a ("ARM64: vdso32: Install vdso32 from vdso_install") Signed-off-by:
Frank van der Linden <fllinden@amazon.com> Cc: stable@vger.kernel.org [5.4+] Link: https://lore.kernel.org/r/20200827234012.19757-1-fllinden@amazon.com Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
James Morse authored
commit 71a7f8cb upstream. AT instructions do a translation table walk and return the result, or the fault in PAR_EL1. KVM uses these to find the IPA when the value is not provided by the CPU in HPFAR_EL1. If a translation table walk causes an external abort it is taken as an exception, even if it was due to an AT instruction. (DDI0487F.a's D5.2.11 "Synchronous faults generated by address translation instructions") While we previously made KVM resilient to exceptions taken due to AT instructions, the device access causes mismatched attributes, and may occur speculatively. Prevent this, by forbidding a walk through memory described as device at stage2. Now such AT instructions will report a stage2 fault. Such a fault will cause KVM to restart the guest. If the AT instructions always walk the page tables, but guest execution uses the translation cached in the TLB, the guest can't make forward progress until the TLB entry is evicted. This isn't a problem, as since commit 5dcd0fdb ("KVM: arm64: Defer guest entry when an asynchronous exception is pending"), KVM will return to the host to process IRQs allowing the rest of the system to keep running. Cc: stable@vger.kernel.org # <v5.3: 5dcd0fdb ("KVM: arm64: Defer guest entry when an asynchronous exception is pending") Signed-off-by:
James Morse <james.morse@arm.com> Reviewed-by:
-
Pavel Begunkov authored
commit 204361a7 upstream. Don't forget to update wqe->hash_tail after cancelling a pending work item, if it was hashed. Cc: stable@vger.kernel.org # 5.7+ Reported-by:
Dmitry Shulyak <yashulyak@gmail.com> Fixes: 86f3cd1b ("io-wq: handle hashed writes in chains") Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Ding Hui authored
commit f1ec7ae6 upstream. Some device drivers call libusb_clear_halt when target ep queue is not empty. (eg. spice client connected to qemu for usb redir) Before commit f5249461 ("xhci: Clear the host side toggle manually when endpoint is soft reset"), that works well. But now, we got the error log: EP not empty, refuse reset xhci_endpoint_reset failed and left ep_state's EP_SOFT_CLEAR_TOGGLE bit still set So all the subsequent urb sumbits to the ep will fail with the warn log: Can't enqueue URB while manually clearing toggle We need to clear ep_state EP_SOFT_CLEAR_TOGGLE bit after xhci_endpoint_reset, even if it failed. Fixes: f5249461 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: stable <stable@vger.kernel.org> # v4.17+ Signed-off-by:
Ding Hui <dinghui@sangfor.com.cn> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200821091549.20556-4-mathias.nyman@linux.intel.com Signed-off-by:
-
Kai-Heng Feng authored
commit 904df64a upstream. Sometimes re-plugging a USB device during system sleep renders the device useless: [ 173.418345] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x14203e2, return 0x10262 ... [ 176.496485] usb 2-4: Waited 2000ms for CONNECT [ 176.496781] usb usb2-port4: status 0000.0262 after resume, -19 [ 176.497103] usb 2-4: can't resume, status -19 [ 176.497438] usb usb2-port4: logical disconnect Because PLS equals to XDEV_RESUME, xHCI driver reports U3 to usbcore, despite of CAS bit is flagged. So proritize CAS over XDEV_RESUME to let usbcore handle warm-reset for the port. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Li Jun authored
commit 0077b1b2 upstream. dci is 0 based and xhci_get_ep_ctx() will do ep index increment to get the ep context. [rename dci to ep_index -Mathias] Cc: stable <stable@vger.kernel.org> # v4.15+ Fixes: 02b6fdc2 ("usb: xhci: Add debugfs interface for xHCI driver") Signed-off-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
-
JC Kuo authored
commit d54343a8 upstream. tegra_xusb_get_phy() should take input argument "name". Signed-off-by:
JC Kuo <jckuo@nvidia.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200811092553.657762-1-jckuo@nvidia.com Signed-off-by:
-
JC Kuo authored
commit 316a2868 upstream. tegra_xusb_init_usb_phy() should initialize "otg_usb2_port" and "otg_usb3_port" with -EINVAL because "0" is a valid value represents usb2 port 0 or usb3 port 0. Signed-off-by:
-
Vinod Koul authored
commit d66a57be upstream. Some devices in wild are reporting bunch of firmware versions, so remove the check for versions in driver Reported by: Anastasios Vacharakis <vacharakis@gmail.com> Reported by: Glen Journeay <journeay@gmail.com> Fixes: 2478be82 ("usb: renesas-xhci: Add ROM loader for uPD720201") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208911 Signed-off-by:
Vinod Koul <vkoul@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200818071739.789720-1-vkoul@kernel.org Signed-off-by:
-
Thomas Gleixner authored
XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information. commit c330fb1d upstream. handler data is meant for interrupt handlers and not for storing irq chip specific information as some devices require handler data to store internal per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers. This obviously creates a conflict of interests and crashes the machine because the XEN pointer is overwritten by the driver pointer. As the XEN data is not handler specific it should be stored in irqdesc::irq_data::chip_data instead. A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that. Cc: stable@vger.kernel.org Reported-by:
Roman Shaposhnik <roman@zededa.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/87lfi2yckt.fsf@nanos.tec.linutronix.de Signed-off-by:
-
Jan Kara authored
commit f9cae926 upstream. When we are processing writeback for sync(2), move_expired_inodes() didn't set any inode expiry value (older_than_this). This can result in writeback never completing if there's steady stream of inodes added to b_dirty_time list as writeback rechecks dirty lists after each writeback round whether there's more work to be done. Fix the problem by using sync(2) start time is inode expiry value when processing b_dirty_time list similarly as for ordinarily dirtied inodes. This requires some refactoring of older_than_this handling which simplifies the code noticeably as a bonus. Fixes: 0ae45f63 ("vfs: add support for a lazytime mount option") CC: stable@vger.kernel.org Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 5afced3b upstream. Inode's i_io_list list head is used to attach inode to several different lists - wb->{b_dirty, b_dirty_time, b_io, b_more_io}. When flush worker prepares a list of inodes to writeback e.g. for sync(2), it moves inodes to b_io list. Thus it is critical for sync(2) data integrity guarantees that inode is not requeued to any other writeback list when inode is queued for processing by flush worker. That's the reason why writeback_single_inode() does not touch i_io_list (unless the inode is completely clean) and why __mark_inode_dirty() does not touch i_io_list if I_SYNC flag is set. However there are two flaws in the current logic: 1) When inode has only I_DIRTY_TIME set but it is already queued in b_io list due to sync(2), concurrent __mark_inode_dirty(inode, I_DIRTY_SYNC) can still move inode back to b_dirty list resulting in skipping writeback of inode time stamps during sync(2). 2) When inode is on b_dirty_time list and writeback_single_inode() races with __mark_inode_dirty() like: writeback_single_inode() __mark_inode_dirty(inode, I_DIRTY_PAGES) inode->i_state |= I_SYNC __writeback_single_inode() inode->i_state |= I_DIRTY_PAGES; if (inode->i_state & I_SYNC) bail if (!(inode->i_state & I_DIRTY_ALL)) - not true so nothing done We end up with I_DIRTY_PAGES inode on b_dirty_time list and thus standard background writeback will not writeback this inode leading to possible dirty throttling stalls etc. (thanks to Martijn Coenen for this analysis). Fix these problems by tracking whether inode is queued in b_io or b_more_io lists in a new I_SYNC_QUEUED flag. When this flag is set, we know flush worker has queued inode and we should not touch i_io_list. On the other hand we also know that once flush worker is done with the inode it will requeue the inode to appropriate dirty list. When I_SYNC_QUEUED is not set, __mark_inode_dirty() can (and must) move inode to appropriate dirty list. Reported-by:
Martijn Coenen <maco@android.com> Reviewed-by:
-
Jan Kara authored
commit b35250c0 upstream. Currently, operations on inode->i_io_list are protected by wb->list_lock. In the following patches we'll need to maintain consistency between inode->i_state and inode->i_io_list so change the code so that inode->i_lock protects also all inode's i_io_list handling. Reviewed-by:
-
Jens Axboe authored
commit 56450c20 upstream. Make sure we clear req->result, which was set to -EAGAIN for retry purposes, when moving it to the reissue list. Otherwise we can end up retrying a request more than once, which leads to weird results in the io-wq handling (and other spots). Cc: stable@vger.kernel.org Reported-by:
Andres Freund <andres@anarazel.de> Signed-off-by:
-
Sergey Senozhatsky authored
commit 205d300a upstream. We have a number of "uart.port->desc.lock vs desc.lock->uart.port" lockdep reports coming from 8250 driver; this causes a bit of trouble to people, so let's fix it. The problem is reverse lock order in two different call paths: chain #1: serial8250_do_startup() spin_lock_irqsave(&port->lock); disable_irq_nosync(port->irq); raw_spin_lock_irqsave(&desc->lock) chain #2: __report_bad_irq() raw_spin_lock_irqsave(&desc->lock) for_each_action_of_desc() printk() spin_lock_irqsave(&port->lock); Fix this by changing the order of locks in serial8250_do_startup(): do disable_irq_nosync() first, which grabs desc->lock, and grab uart->port after that, so that chain #1 and chain #2 have same lock order. Full lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.4.39 #55 Not tainted ====================================================== swapper/0/0 is trying to acquire lock: ffffffffab65b6c0 (console_owner){-...}, at: console_lock_spinning_enable+0x31/0x57 but task is already holding lock: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&irq_desc_lock_class){-.-.}: _raw_spin_lock_irqsave+0x61/0x8d __irq_get_desc_lock+0x65/0x89 __disable_irq_nosync+0x3b/0x93 serial8250_do_startup+0x451/0x75c uart_startup+0x1b4/0x2ff uart_port_activate+0x73/0xa0 tty_port_open+0xae/0x10a uart_open+0x1b/0x26 tty_open+0x24d/0x3a0 chrdev_open+0xd5/0x1cc do_dentry_open+0x299/0x3c8 path_openat+0x434/0x1100 do_filp_open+0x9b/0x10a do_sys_open+0x15f/0x3d7 kernel_init_freeable+0x157/0x1dd kernel_init+0xe/0x105 ret_from_fork+0x27/0x50 -> #1 (&port_lock_key){-.-.}: _raw_spin_lock_irqsave+0x61/0x8d serial8250_console_write+0xa7/0x2a0 console_unlock+0x3b7/0x528 vprintk_emit+0x111/0x17f printk+0x59/0x73 register_console+0x336/0x3a4 uart_add_one_port+0x51b/0x5be serial8250_register_8250_port+0x454/0x55e dw8250_probe+0x4dc/0x5b9 platform_drv_probe+0x67/0x8b really_probe+0x14a/0x422 driver_probe_device+0x66/0x130 device_driver_attach+0x42/0x5b __driver_attach+0xca/0x139 bus_for_each_dev+0x97/0xc9 bus_add_driver+0x12b/0x228 driver_register+0x64/0xed do_one_initcall+0x20c/0x4a6 do_initcall_level+0xb5/0xc5 do_basic_setup+0x4c/0x58 kernel_init_freeable+0x13f/0x1dd kernel_init+0xe/0x105 ret_from_fork+0x27/0x50 -> #0 (console_owner){-...}: __lock_acquire+0x118d/0x2714 lock_acquire+0x203/0x258 console_lock_spinning_enable+0x51/0x57 console_unlock+0x25d/0x528 vprintk_emit+0x111/0x17f printk+0x59/0x73 __report_bad_irq+0xa3/0xba note_interrupt+0x19a/0x1d6 handle_irq_event_percpu+0x57/0x79 handle_irq_event+0x36/0x55 handle_fasteoi_irq+0xc2/0x18a do_IRQ+0xb3/0x157 ret_from_intr+0x0/0x1d cpuidle_enter_state+0x12f/0x1fd cpuidle_enter+0x2e/0x3d do_idle+0x1ce/0x2ce cpu_startup_entry+0x1d/0x1f start_kernel+0x406/0x46a secondary_startup_64+0xa4/0xb0 other info that might help us debug this: Chain exists of: console_owner --> &port_lock_key --> &irq_desc_lock_class Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&irq_desc_lock_class); lock(&port_lock_key); lock(&irq_desc_lock_class); lock(console_owner); *** DEADLOCK *** 2 locks held by swapper/0/0: #0: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba #1: ffffffffab65b5c0 (console_lock){+.+.}, at: console_trylock_spinning+0x20/0x181 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.39 #55 Hardware name: XXXXXX Call Trace: <IRQ> dump_stack+0xbf/0x133 ? print_circular_bug+0xd6/0xe9 check_noncircular+0x1b9/0x1c3 __lock_acquire+0x118d/0x2714 lock_acquire+0x203/0x258 ? console_lock_spinning_enable+0x31/0x57 console_lock_spinning_enable+0x51/0x57 ? console_lock_spinning_enable+0x31/0x57 console_unlock+0x25d/0x528 ? console_trylock+0x18/0x4e vprintk_emit+0x111/0x17f ? lock_acquire+0x203/0x258 printk+0x59/0x73 __report_bad_irq+0xa3/0xba note_interrupt+0x19a/0x1d6 handle_irq_event_percpu+0x57/0x79 handle_irq_event+0x36/0x55 handle_fasteoi_irq+0xc2/0x18a do_IRQ+0xb3/0x157 common_interrupt+0xf/0xf </IRQ> Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Fixes: 768aec0b ("serial: 8250: fix shared interrupts issues with SMP and RT kernels") Reported-by:
Guenter Roeck <linux@roeck-us.net> Reported-by:
Raul Rangel <rrangel@google.com> BugLink: https://bugs.chromium.org/p/chromium/issues/detail?id=1114800 Link: https://lore.kernel.org/lkml/CAHQZ30BnfX+gxjPm1DUd5psOTqbyDh4EJE=2=VAMW_VDafctkA@mail.gmail.com/T/#u Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Valmer Huhn authored
commit c6b9e95d upstream. The following in 8250_exar.c line 589 is used to determine the number of ports for each Exar board: nr_ports = board->num_ports ? board->num_ports : pcidev->device & 0x0f; If the number of ports a card has is not explicitly specified, it defaults to the rightmost 4 bits of the PCI device ID. This is prone to error since not all PCI device IDs contain a number which corresponds to the number of ports that card provides. This particular case involves COMMTECH_4222PCIE, COMMTECH_4224PCIE and COMMTECH_4228PCIE cards with device IDs 0x0022, 0x0020 and 0x0021. Currently the multiport cards receive 2, 0 and 1 port instead of 2, 4 and 8 ports respectively. To fix this, each Commtech Fastcom PCIe card is given a struct where the number of ports is explicitly specified. This ensures 'board->num_ports' is used instead of the default 'pcidev->device & 0x0f'. Fixes: d0aeaa83 ("serial: exar: split out the exar code from 8250_pci") Signed-off-by:
Valmer Huhn <valmer.huhn@concurrent-rt.com> Tested-by:
-
Holger Assmann authored
commit fdf16d78 upstream. stm32_init_port() of the stm32-usart may trigger a warning in platform_get_irq() when the device tree specifies no wakeup interrupt. The wakeup interrupt is usually a board-specific GPIO and the driver functions correctly in its absence. The mainline stm32mp151.dtsi does not specify it, so all mainline device trees trigger an unnecessary kernel warning. Use of platform_get_irq_optional() avoids this. Fixes: 2c58e560 ("serial: stm32: fix the get_irq error case") Signed-off-by:
Holger Assmann <h.assmann@pengutronix.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200813152757.32751-1-h.assmann@pengutronix.de Signed-off-by:
-
Lukas Wunner authored
commit 89efbe70 upstream. pl011_probe() calls pl011_setup_port() to reserve an amba_ports[] entry, then calls pl011_register_port() to register the uart driver with the tty layer. If registration of the uart driver fails, the amba_ports[] entry is not released. If this happens 14 times (value of UART_NR macro), then all amba_ports[] entries will have been leaked and driver probing is no longer possible. (To be fair, that can only happen if the DeviceTree doesn't contain alias IDs since they cause the same entry to be used for a given port.) Fix it. Fixes: ef2889f7 ("serial: pl011: Move uart_register_driver call to device") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v3.15+ Cc: Tushar Behera <tushar.behera@linaro.org> Link: https://lore.kernel.org/r/138f8c15afb2f184d8102583f8301575566064a6.1597316167.git.lukas@wunner.de Signed-off-by:
-
Lukas Wunner authored
commit 27afac93 upstream. If probing of a pl011 gets deferred until after free_initmem(), an oops ensues because pl011_console_match() is called which has been freed. Fix by removing the __init attribute from the function and those it calls. Commit 10879ae5 ("serial: pl011: add console matching function") introduced pl011_console_match() not just for early consoles but regular preferred consoles, such as those added by acpi_parse_spcr(). Regular consoles may be registered after free_initmem() for various reasons, one being deferred probing, another being dynamic enablement of serial ports using a DeviceTree overlay. Thus, pl011_console_match() must not be declared __init and the functions it calls mustn't either. Stack trace for posterity: Unable to handle kernel paging request at virtual address 80c38b58 Internal error: Oops: 8000000d [#1] PREEMPT SMP ARM PC is at pl011_console_match+0x0/0xfc LR is at register_console+0x150/0x468 [<80187004>] (register_console) [<805a8184>] (uart_add_one_port) [<805b2b68>] (pl011_register_port) [<805b3ce4>] (pl011_probe) [<80569214>] (amba_probe) [<805ca088>] (really_probe) [<805ca2ec>] (driver_probe_device) [<805ca5b0>] (__device_attach_driver) [<805c8060>] (bus_for_each_drv) [<805c9dfc>] (__device_attach) [<805ca630>] (device_initial_probe) [<805c90a8>] (bus_probe_device) [<805c95a8>] (deferred_probe_work_func) Fixes: 10879ae5 ("serial: pl011: add console matching function") Signed-off-by:
-
Tamseel Shams authored
commit 8c6c378b upstream. In few older Samsung SoCs like s3c2410, s3c2412 and s3c2440, UART IP is having 2 interrupt lines. However, in other SoCs like s3c6400, s5pv210, exynos5433, and exynos4210 UART is having only 1 interrupt line. Due to this, "platform_get_irq(platdev, 1)" call in the driver gives the following false-positive error: "IRQ index 1 not found" on newer SoC's. This patch adds the condition to check for Tx interrupt only for the those SoC's which have 2 interrupt lines. Tested-by:
Alim Akhtar <alim.akhtar@samsung.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Tamseel Shams <m.shams@samsung.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200810030021.45348-1-m.shams@samsung.com Signed-off-by:
-
George Kennedy authored
commit bc5269ca upstream. vc_resize() can return with an error after failure. Change VT_RESIZEX ioctl to save struct vc_data values that are modified and restore the original values in case of error. Signed-off-by:
George Kennedy <george.kennedy@oracle.com> Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+38a3699c7eaf165b97a6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/1596213192-6635-2-git-send-email-george.kennedy@oracle.com Signed-off-by:
-
Tetsuo Handa authored
commit f8d1653d upstream. syzbot is reporting UAF bug in set_origin() from vc_do_resize() [1], for vc_do_resize() calls kfree(vc->vc_screenbuf) before calling set_origin(). Unfortunately, in set_origin(), vc->vc_sw->con_set_origin() might access vc->vc_pos when scroll is involved in order to manipulate cursor, but vc->vc_pos refers already released vc->vc_screenbuf until vc->vc_pos gets updated based on the result of vc->vc_sw->con_set_origin(). Preserving old buffer and tolerating outdated vc members until set_origin() completes would be easier than preventing vc->vc_sw->con_set_origin() from accessing outdated vc members. [1] https://syzkaller.appspot.com/bug?id=6649da2081e2ebdc65c0642c214b27fe91099db3 Reported-by:
syzbot <syzbot+9116ecc1978ca3a12f43@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1596034621-4714-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by:
-
Evgeny Novikov authored
commit 53141249 upstream. lvs_rh_probe() can return some nonnegative value from usb_control_msg() when it is less than "USB_DT_HUB_NONVAR_SIZE + 2" that is considered as a failure. Make lvs_rh_probe() return -EINVAL in this case. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200805090643.3432-1-novikov@ispras.ru Signed-off-by:
-
George Kennedy authored
commit 39b3cffb upstream. Add a check to fbcon_resize() to ensure that a possible change to user font height or user font width will not allow a font data out-of-bounds access. NOTE: must use original charcount in calculation as font charcount can change and cannot be used to determine the font data allocated size. Signed-off-by:
-
Boris Burkov authored
commit a84d5d42 upstream. can_nocow_extent and btrfs_cross_ref_exist both rely on a heuristic for detecting a must cow condition which is not exactly accurate, but saves unnecessary tree traversal. The incorrect assumption is that if the extent was created in a generation smaller than the last snapshot generation, it must be referenced by that snapshot. That is true, except the snapshot could have since been deleted, without affecting the last snapshot generation. The original patch claimed a performance win from this check, but it also leads to a bug where you are unable to use a swapfile if you ever snapshotted the subvolume it's in. Make the check slower and more strict for the swapon case, without modifying the general cow checks as a compromise. Turning swap on does not seem to be a particularly performance sensitive operation, so incurring a possibly unnecessary btrfs_search_slot seems worthwhile for the added usability. Note: Until the snapshot is competely cleaned after deletion, check_committed_refs will still cause the logic to think that cow is necessary, so the user must until 'btrfs subvolu sync' finished before activating the swapfile swapon. CC: stable@vger.kernel.org # 5.4+ Suggested-by:
Omar Sandoval <osandov@osandov.com> Signed-off-by:
Boris Burkov <boris@bur.io> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Filipe Manana authored
commit bbc37d6e upstream. If a transaction aborts it can cause a memory leak of the pages array of a block group's io_ctl structure. The following steps explain how that can happen: 1) Transaction N is committing, currently in state TRANS_STATE_UNBLOCKED and it's about to start writing out dirty extent buffers; 2) Transaction N + 1 already started and another task, task A, just called btrfs_commit_transaction() on it; 3) Block group B was dirtied (extents allocated from it) by transaction N + 1, so when task A calls btrfs_start_dirty_block_groups(), at the very beginning of the transaction commit, it starts writeback for the block group's space cache by calling btrfs_write_out_cache(), which allocates the pages array for the block group's io_ctl with a call to io_ctl_init(). Block group A is added to the io_list of transaction N + 1 by btrfs_start_dirty_block_groups(); 4) While transaction N's commit is writing out the extent buffers, it gets an IO error and aborts transaction N, also setting the file system to RO mode; 5) Task A has already returned from btrfs_start_dirty_block_groups(), is at btrfs_commit_transaction() and has set transaction N + 1 state to TRANS_STATE_COMMIT_START. Immediately after that it checks that the filesystem was turned to RO mode, due to transaction N's abort, and jumps to the "cleanup_transaction" label. After that we end up at btrfs_cleanup_one_transaction() which calls btrfs_cleanup_dirty_bgs(). That helper finds block group B in the transaction's io_list but it never releases the pages array of the block group's io_ctl, resulting in a memory leak. In fact at the point when we are at btrfs_cleanup_dirty_bgs(), the pages array points to pages that were already released by us at __btrfs_write_out_cache() through the call to io_ctl_drop_pages(). We end up freeing the pages array only after waiting for the ordered extent to complete through btrfs_wait_cache_io(), which calls io_ctl_free() to do that. But in the transaction abort case we don't wait for the space cache's ordered extent to complete through a call to btrfs_wait_cache_io(), so that's why we end up with a memory leak - we wait for the ordered extent to complete indirectly by shutting down the work queues and waiting for any jobs in them to complete before returning from close_ctree(). We can solve the leak simply by freeing the pages array right after releasing the pages (with the call to io_ctl_drop_pages()) at __btrfs_write_out_cache(), since we will never use it anymore after that and the pages array points to already released pages at that point, which is currently not a problem since no one will use it after that, but not a good practice anyway since it can easily lead to use-after-free issues. So fix this by freeing the pages array right after releasing the pages at __btrfs_write_out_cache(). This issue can often be reproduced with test case generic/475 from fstests and kmemleak can detect it and reports it with the following trace: unreferenced object 0xffff9bbf009fa600 (size 512): comm "fsstress", pid 38807, jiffies 4298504428 (age 22.028s) hex dump (first 32 bytes): 00 a0 7c 4d 3d ed ff ff 40 a0 7c 4d 3d ed ff ff ..|M=...@.|M=... 80 a0 7c 4d 3d ed ff ff c0 a0 7c 4d 3d ed ff ff ..|M=.....|M=... backtrace: [<00000000f4b5cfe2>] __kmalloc+0x1a8/0x3e0 [<0000000028665e7f>] io_ctl_init+0xa7/0x120 [btrfs] [<00000000a1f95b2d>] __btrfs_write_out_cache+0x86/0x4a0 [btrfs] [<00000000207ea1b0>] btrfs_write_out_cache+0x7f/0xf0 [btrfs] [<00000000af21f534>] btrfs_start_dirty_block_groups+0x27b/0x580 [btrfs] [<00000000c3c23d44>] btrfs_commit_transaction+0xa6f/0xe70 [btrfs] [<000000009588930c>] create_subvol+0x581/0x9a0 [btrfs] [<000000009ef2fd7f>] btrfs_mksubvol+0x3fb/0x4a0 [btrfs] [<00000000474e5187>] __btrfs_ioctl_snap_create+0x119/0x1a0 [btrfs] [<00000000708ee349>] btrfs_ioctl_snap_create_v2+0xb0/0xf0 [btrfs] [<00000000ea60106f>] btrfs_ioctl+0x12c/0x3130 [btrfs] [<000000005c923d6d>] __x64_sys_ioctl+0x83/0xb0 [<0000000043ace2c9>] do_syscall_64+0x33/0x80 [<00000000904efbce>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 CC: stable@vger.kernel.org # 4.9+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Josef Bacik authored
commit fb2fecba upstream. With my new locking code dbench is so much faster that I tripped over a transaction abort from ENOSPC. This turned out to be because btrfs_del_dir_entries_in_log was checking for ret == -ENOSPC, but this function sets err on error, and returns err. So instead of properly marking the inode as needing a full commit, we were returning -ENOSPC and aborting in __btrfs_unlink_inode. Fix this by checking the proper variable so that we return the correct thing in the case of ENOSPC. The ENOENT needs to be checked, because btrfs_lookup_dir_item_index() can return -ENOENT if the dir item isn't in the tree log (which would happen if we hadn't fsync'ed this guy). We actually handle that case in __btrfs_unlink_inode, so it's an expected error to get back. Fixes: 4a500fd1 ("Btrfs: Metadata ENOSPC handling for tree log") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Marcos Paulo de Souza authored
commit 282dd7d7 upstream. Currently a user can set mount "-o compress" which will set the compression algorithm to zlib, and use the default compress level for zlib (3): relatime,compress=zlib:3,space_cache If the user remounts the fs using "-o compress=lzo", then the old compress_level is used: relatime,compress=lzo:3,space_cache But lzo does not expose any tunable compression level. The same happens if we set any compress argument with different level, also with zstd. Fix this by resetting the compress_level when compress=lzo is specified. With the fix applied, lzo is shown without compress level: relatime,compress=lzo,space_cache CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by:
-
Ming Lei authored
commit d7d8535f upstream. SCHED_RESTART code path is relied to re-run queue for dispatch requests in hctx->dispatch. Meantime the SCHED_RSTART flag is checked when adding requests to hctx->dispatch. memory barriers have to be used for ordering the following two pair of OPs: 1) adding requests to hctx->dispatch and checking SCHED_RESTART in blk_mq_dispatch_rq_list() 2) clearing SCHED_RESTART and checking if there is request in hctx->dispatch in blk_mq_sched_restart(). Without the added memory barrier, either: 1) blk_mq_sched_restart() may miss requests added to hctx->dispatch meantime blk_mq_dispatch_rq_list() observes SCHED_RESTART, and not run queue in dispatch side or 2) blk_mq_dispatch_rq_list still sees SCHED_RESTART, and not run queue in dispatch side, meantime checking if there is request in hctx->dispatch from blk_mq_sched_restart() is missed. IO hang in ltp/fs_fill test is reported b...
-
Hans de Goede authored
commit eef40162 upstream. Before this commit i2c_hid_parse() consists of the following steps: 1. Send power on cmd 2. usleep_range(1000, 5000) 3. Send reset cmd 4. Wait for reset to complete (device interrupt, or msleep(100)) 5. Send power on cmd 6. Try to read HID descriptor Notice how there is an usleep_range(1000, 5000) after the first power-on command, but not after the second power-on command. Testing has shown that at least on the BMAX Y13 laptop's i2c-hid touchpad, not having a delay after the second power-on command causes the HID descriptor to read as all zeros. In case we hit this on other devices too, the descriptor being all zeros can be recognized by the following message being logged many, many times: hid-generic 0018:0911:5288.0002: unknown main item tag 0x0 At the same time as the BMAX Y13's touchpad issue was debugged, Kai-Heng was working on debugging some issues with Goodix i2c-hid touchpads. It turns out that these need a delay after a PWR_ON command too, otherwise they stop working after a suspend/resume cycle. According to Goodix a delay of minimal 60ms is needed. Having multiple cases where we need a delay after sending the power-on command, seems to indicate that we should always sleep after the power-on command. This commit fixes the mentioned issues by moving the existing 1ms sleep to the i2c_hid_set_power() function and changing it to a 60ms sleep. Cc: stable@vger.kernel.org BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208247 Reported-by:
Andrea Borgia <andrea@borgia.bo.it> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Ming Lei authored
commit bcb21c8c upstream. In case of block device backend, if the backend supports write zeros, the loop device will set queue flag of QUEUE_FLAG_DISCARD. However, limits.discard_granularity isn't setup, and this way is wrong, see the following description in Documentation/ABI/testing/sysfs-block: A discard_granularity of 0 means that the device does not support discard functionality. Especially 9b15d109 ("block: improve discard bio alignment in __blkdev_issue_discard()") starts to take q->limits.discard_granularity for computing max discard sectors. And zero discard granularity may cause kernel oops, or fail discard request even though the loop queue claims discard support via QUEUE_FLAG_DISCARD. Fix the issue by setup discard granularity and alignment. Fixes: c52abf56 ("loop: Better discard support for block devices") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Coly Li <colyli@suse.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Xiao Ni <xni@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Evan Green <evgreen@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Keith Busch authored
commit e4b469c6 upstream. A previous commit aligning splits to physical block sizes inadvertently modified one return case such that that it now returns 0 length splits when the number of sectors doesn't exceed the physical offset. This later hits a BUG in bio_split(). Restore the previous working behavior. Fixes: 9cc5169c ("block: Improve physical block alignment of split bios") Reported-by:
Eric Deal <eric.deal@wdc.com> Signed-off-by:
Keith Busch <kbusch@kernel.org> Cc: Bart Van Assche <bvanassche@acm.org> Cc: stable@vger.kernel.org Signed-off-by:
-
