- 27 Apr, 2022 40 commits
-
-
Miaoqian Lin authored
[ Upstream commit 81022a17 ] If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1, so a test for negative value should be used to check for errors. Fixes: f77621cc ("Input: omap-keypad - dynamically handle register offsets") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220412070131.19848-1-linmq006@gmail.com Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jens Axboe authored
[ Upstream commit 323b190b ] We just return failure in this case, but we need to release the iovec first. If we're doing IO with more than FAST_IOV segments, then the iovec is allocated and must be freed. Reported-by: syzbot+96b43810dfe9c3bb95ed@syzkaller.appspotmail.com Fixes: 584b0180 ("io_uring: move read/write file prep state into actual opcode handler") Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Christian König authored
[ Upstream commit 02207491 ] Shared is the opposite of write/exclusive. Signed-off-by:
Christian König <christian.koenig@amd.com> Fixes: 0597ca7b ("drm/radeon: use new iterator in radeon_sync_resv") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1970 Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220412093626.608767-1-christian.koenig@amd.com Signed-off-by:
-
Manuel Ullmann authored
commit cbe6c3a8 upstream. This will reset deeply on freeze and thaw instead of suspend and resume and prevent null pointer dereferences of the uninitialized ring 0 buffer while thawing. The impact is an indefinitely hanging kernel. You can't switch consoles after this and the only possible user interaction is SysRq. BUG: kernel NULL pointer dereference RIP: 0010:aq_ring_rx_fill+0xcf/0x210 [atlantic] aq_vec_init+0x85/0xe0 [atlantic] aq_nic_init+0xf7/0x1d0 [atlantic] atl_resume_common+0x4f/0x100 [atlantic] pci_pm_thaw+0x42/0xa0 resolves in aq_ring.o to ``` 0000000000000ae0 <aq_ring_rx_fill>: { /* ... */ baf: 48 8b 43 08 mov 0x8(%rbx),%rax buff->flags = 0U; /* buff is NULL */ ``` The bug has been present since the introduction of the new pm code in 8aaa112a ("net: atlantic: refactoring pm logic") and was hidden until 8ce84271 ("net: atlantic: changes for multi-TC support"), which refactored the aq_vec_{free,alloc} functions into aq_vec_{,ring}_{free,alloc}, but is technically not wrong. The original functions just always reinitialized the buffers on S3/S4. If the interface is down before freezing, the bug does not occur. It does not matter, whether the initrd contains and loads the module before thawing. So the fix is to invert the boolean parameter deep in all pm function calls, which was clearly intended to be set like that. First report was on Github [1], which you have to guess from the resume logs in the posted dmesg snippet. Recently I posted one on Bugzilla [2], since I did not have an AQC device so far. #regzbot introduced: 8ce84271 #regzbot from: koo5 <kolman.jindrich@gmail.com> #regzbot monitor: https://github.com/Aquantia/AQtion/issues/32 Fixes: 8aaa112a ("net: atlantic: refactoring pm logic") Link: https://github.com/Aquantia/AQtion/issues/32 [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=215798 [2] Cc: stable@vger.kernel.org Reported-by:
koo5 <kolman.jindrich@gmail.com> Signed-off-by:
Manuel Ullmann <labre@posteo.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin Groeneveld authored
commit a3ae97f4 upstream. Commit b98ce2f4 ("dmaengine: imx-sdma: add uart rom script") broke uart rx on imx5 when using sdma firmware from older Freescale 2.6.35 kernel. In this case reading addr->uartXX_2_mcu_addr was going out of bounds of the firmware memory and corrupting the uart script addresses. Simply adding a bounds check before accessing addr->uartXX_2_mcu_addr does not work as the uartXX_2_mcu_addr members are now beyond the size of the older firmware and the uart addresses would never be populated in that case. There are other ways to fix this but overall the logic seems clearer to me to revert the uartXX_2_mcu_ram_addr structure entries back to uartXX_2_mcu_addr, change the newer entries to uartXX_2_mcu_rom_addr and update the logic accordingly. I have tested this patch on: 1. An i.MX53 system with sdma firmware from Freescale 2.6.35 kernel. Without this patch uart rx is broken in this scenario, with the patch uart rx is restored. 2. An i.MX6D system with no external sdma firmware. uart is okay with or without this patch. 3. An i.MX8MM system using current sdma-imx7d.bin firmware from linux-firmware. uart is okay with or without this patch and I confirmed the rom version of the uart script is being used which was the intention and reason for commit b98ce2f4 ("dmaengine: imx-sdma: add uart rom script") in the first place. Fixes: b98ce2f4 ("dmaengine: imx-sdma: add uart rom script") Cc: stable@vger.kernel.org Signed-off-by:
Kevin Groeneveld <kgroeneveld@lenbrook.com> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220410223118.15086-1-kgroeneveld@lenbrook.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Xiaomeng Tong authored
commit 206680c4 upstream. The bug is here: __func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue); The list iterator 'desc' will point to a bogus position containing HEAD if the list is empty or no element is found. To avoid dev_dbg() prints a invalid address, use a new variable 'iter' as the list iterator, while use the origin variable 'desc' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 82e24246 ("dmaengine: xdmac: fix print warning on dma_addr_t variable") Signed-off-by:
Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220327061154.4867-1-xiam0nd.tong@gmail.com Signed-off-by:
-
Zheyu Ma authored
commit aafa9f95 upstream. Before detecting the cable type on the dma bar, the driver should check whether the 'bmdma_addr' is zero, which means the adapter does not support DMA, otherwise we will get the following error: [ 5.146634] Bad IO access at port 0x1 (return inb(port)) [ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60 [ 5.150856] RIP: 0010:ioread8+0x4a/0x60 [ 5.160238] Call Trace: [ 5.160470] <TASK> [ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell] [ 5.161728] ata_eh_recover+0x3520/0x6cc0 [ 5.168075] ata_do_eh+0x49/0x3c0 Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
-
Alistair Popple authored
commit 31956166 upstream. In some cases it is possible for mmu_interval_notifier_remove() to race with mn_tree_inv_end() allowing it to return while the notifier data structure is still in use. Consider the following sequence: CPU0 - mn_tree_inv_end() CPU1 - mmu_interval_notifier_remove() ----------------------------------- ------------------------------------ spin_lock(subscriptions->lock); seq = subscriptions->invalidate_seq; spin_lock(subscriptions->lock); spin_unlock(subscriptions->lock); subscriptions->invalidate_seq++; wait_event(invalidate_seq != seq); return; interval_tree_remove(interval_sub); kfree(interval_sub); spin_unlock(subscriptions->lock); wake_up_all(); As the wait_event() condition is true it will return immediately. This can lead to use-after-free type errors if the caller frees the data structure containing the interval notifier subscription while it is still on a deferred list. Fix this by taking the appropriate lock when reading invalidate_seq to ensure proper synchronisation. I observed this whilst running stress testing during some development. You do have to be pretty unlucky, but it leads to the usual problems of use-after-free (memory corruption, kernel crash, difficult to diagnose WARN_ON, etc). Link: https://lkml.kernel.org/r/20220420043734.476348-1-apopple@nvidia.com Fixes: 99cb252f ("mm/mmu_notifier: add an interval tree notifier") Signed-off-by:
Alistair Popple <apopple@nvidia.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Cc: Christian König <christian.koenig@amd.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Nico Pache authored
commit e4a38402 upstream. The pthread struct is allocated on PRIVATE|ANONYMOUS memory [1] which can be targeted by the oom reaper. This mapping is used to store the futex robust list head; the kernel does not keep a copy of the robust list and instead references a userspace address to maintain the robustness during a process death. A race can occur between exit_mm and the oom reaper that allows the oom reaper to free the memory of the futex robust list before the exit path has handled the futex death: CPU1 CPU2 -------------------------------------------------------------------- page_fault do_exit "signal" wake_oom_reaper oom_reaper oom_reap_task_mm (invalidates mm) exit_mm exit_mm_release futex_exit_release futex_cleanup exit_robust_list get_user (EFAULT- can't access memory) If the get_user EFAULT's, the kernel will be unable to recover the waiters on the robust_list, leaving userspace mutexes hung indefinitely. Delay the OOM reaper, allowing more time for the exit path to perform the futex cleanup. Reproducer: https://gitlab.com/jsavitz/oom_futex_reproducer Based on a patch by Michal Hocko. Link: https://elixir.bootlin.com/glibc/glibc-2.35/source/nptl/allocatestack.c#L370 [1] Link: https://lkml.kernel.org/r/20220414144042.677008-1-npache@redhat.com Fixes: 21292580 ("mm: oom: let oom_reap_task and exit_mmap run concurrently") Signed-off-by:
Joel Savitz <jsavitz@redhat.com> Signed-off-by:
Nico Pache <npache@redhat.com> Co-developed-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Waiman Long <longman@redhat.com> Cc: Herton R. Krzesinski <herton@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Savitz <jsavitz@redhat.com> Cc: Darren Hart <dvhart@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Christophe Leroy authored
commit 5f24d5a5 upstream. This is a fix for commit f6795053 ("mm: mmap: Allow for "high" userspace addresses") for hugetlb. This patch adds support for "high" userspace addresses that are optionally supported on the system and have to be requested via a hint mechanism ("high" addr parameter to mmap). Architectures such as powerpc and x86 achieve this by making changes to their architectural versions of hugetlb_get_unmapped_area() function. However, arm64 uses the generic version of that function. So take into account arch_get_mmap_base() and arch_get_mmap_end() in hugetlb_get_unmapped_area(). To allow that, move those two macros out of mm/mmap.c into include/linux/sched/mm.h If these macros are not defined in architectural code then they default to (TASK_SIZE) and (base) so should not introduce any behavioural changes to architectures that do not define them. For the time being, only ARM64 is affected by this change. Catalin (ARM64) said "We should have fixed hugetlb_get_unmapped_area() as well when we added support for 52-bit VA. The reason for commit f6795053 was to prevent normal mmap() from returning addresses above 48-bit by default as some user-space had hard assumptions about this. It's a slight ABI change if you do this for hugetlb_get_unmapped_area() but I doubt anyone would notice. It's more likely that the current behaviour would cause issues, so I'd rather have them consistent. Basically when arm64 gained support for 52-bit addresses we did not want user-space calling mmap() to suddenly get such high addresses, otherwise we could have inadvertently broken some programs (similar behaviour to x86 here). Hence we added commit f6795053. But we missed hugetlbfs which could still get such high mmap() addresses. So in theory that's a potential regression that should have bee addressed at the same time as commit f6795053 (and before arm64 enabled 52-bit addresses)" Link: https://lkml.kernel.org/r/ab847b6edb197bffdfe189e70fb4ac76bfe79e0d.1650033747.git.christophe.leroy@csgroup.eu Fixes: f6795053 ("mm: mmap: Allow for "high" userspace addresses") Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> [5.0.x] Signed-off-by:
-
Shakeel Butt authored
commit 9b301615 upstream. Daniel Dao has reported [1] a regression on workloads that may trigger a lot of refaults (anon and file). The underlying issue is that flushing rstat is expensive. Although rstat flush are batched with (nr_cpus * MEMCG_BATCH) stat updates, it seems like there are workloads which genuinely do stat updates larger than batch value within short amount of time. Since the rstat flush can happen in the performance critical codepaths like page faults, such workload can suffer greatly. This patch fixes this regression by making the rstat flushing conditional in the performance critical codepaths. More specifically, the kernel relies on the async periodic rstat flusher to flush the stats and only if the periodic flusher is delayed by more than twice the amount of its normal time window then the kernel allows rstat flushing from the performance critical codepaths. Now the question: what are the side-effects of this change? The worst that can happen is the refault codepath will see 4sec old lruvec stats and may cause false (or missed) activations of the refaulted page which may under-or-overestimate the workingset size. Though that is not very concerning as the kernel can already miss or do false activations. There are two more codepaths whose flushing behavior is not changed by this patch and we may need to come to them in future. One is the writeback stats used by dirty throttling and second is the deactivation heuristic in the reclaim. For now keeping an eye on them and if there is report of regression due to these codepaths, we will reevaluate then. Link: https://lore.kernel.org/all/CA+wXwBSyO87ZX5PVwdHm-=dBjZYECGmfnydUicUyrQqndgX2MQ@mail.gmail.com [1] Link: https://lkml.kernel.org/r/20220304184040.1304781-1-shakeelb@google.com Fixes: 1f828223 ("memcg: flush lruvec stats in the refault") Signed-off-by:
Shakeel Butt <shakeelb@google.com> Reported-by:
Daniel Dao <dqminh@cloudflare.com> Tested-by:
Ivan Babrou <ivan@cloudflare.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Frank Hofmann <fhofmann@cloudflare.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Xu Yu authored
commit d173d541 upstream. Kernel panic when injecting memory_failure for the global huge_zero_page, when CONFIG_DEBUG_VM is enabled, as follows. Injecting memory failure for pfn 0x109ff9 at process virtual address 0x20ff9000 page:00000000fb053fc3 refcount:2 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x109e00 head:00000000fb053fc3 order:9 compound_mapcount:0 compound_pincount:0 flags: 0x17fffc000010001(locked|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 017fffc000010001 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000002ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(is_huge_zero_page(head)) ------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:2499! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 553 Comm: split_bug Not tainted 5.18.0-rc1+ #11 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 3288b3c 04/01/2014 RIP: 0010:split_huge_page_to_list+0x66a/0x880 Code: 84 9b fb ff ff 48 8b 7c 24 08 31 f6 e8 9f 5d 2a 00 b8 b8 02 00 00 e9 e8 fb ff ff 48 c7 c6 e8 47 3c 82 4c b RSP: 0018:ffffc90000dcbdf8 EFLAGS: 00010246 RAX: 000000000000003c RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff823e4c4f RDI: 00000000ffffffff RBP: ffff88843fffdb40 R08: 0000000000000000 R09: 00000000fffeffff R10: ffffc90000dcbc48 R11: ffffffff82d68448 R12: ffffea0004278000 R13: ffffffff823c6203 R14: 0000000000109ff9 R15: ffffea000427fe40 FS: 00007fc375a26740(0000) GS:ffff88842fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc3757c9290 CR3: 0000000102174006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: try_to_split_thp_page+0x3a/0x130 memory_failure+0x128/0x800 madvise_inject_error.cold+0x8b/0xa1 __x64_sys_madvise+0x54/0x60 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc3754f8bf9 Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8 RSP: 002b:00007ffeda93a1d8 EFLAGS: 00000217 ORIG_RAX: 000000000000001c RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc3754f8bf9 RDX: 0000000000000064 RSI: 0000000000003000 RDI: 0000000020ff9000 RBP: 00007ffeda93a200 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000ffffffff R11: 0000000000000217 R12: 0000000000400490 R13: 00007ffeda93a2e0 R14: 0000000000000000 R15: 0000000000000000 This makes huge_zero_page bail out explicitly before split in memory_failure(), thus the panic above won't happen again. Link: https://lkml.kernel.org/r/497d3835612610e370c74e697ea3c721d1d55b9c.1649775850.git.xuyu@linux.alibaba.com Fixes: 6a46079c ("HWPOISON: The high level memory error handler in the VM v7") Signed-off-by:
Xu Yu <xuyu@linux.alibaba.com> Reported-by:
Abaci <abaci@linux.alibaba.com> Suggested-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Acked-by:
Miaohe Lin <linmiaohe@huawei.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Shubhrajyoti Datta authored
commit e2932d1f upstream. Currently, the error count is read wrongly from the status register. Read the count from the proper error count register (ERRCNT). [ bp: Massage. ] Fixes: b500b4a0 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220414102813.4468-1-shubhrajyoti.datta@xilinx.com Signed-off-by:
-
Zqiang authored
[ Upstream commit 25934fcf ] On PREEMPT_RT kernel and KASAN is enabled. the kasan_record_aux_stack() may call alloc_pages(), and the rt-spinlock will be acquired, if currently in atomic context, will trigger warning: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 239, name: bootlogd Preemption disabled at: [<ffffffffbab1a531>] rt_mutex_slowunlock+0xa1/0x4e0 CPU: 3 PID: 239 Comm: bootlogd Tainted: G W 5.17.1-rt17-yocto-preempt-rt+ #105 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace: __might_resched.cold+0x13b/0x173 rt_spin_lock+0x5b/0xf0 get_page_from_freelist+0x20c/0x1610 __alloc_pages+0x25e/0x5e0 __stack_depot_save+0x3c0/0x4a0 kasan_save_stack+0x3a/0x50 __kasan_record_aux_stack+0xb6/0xc0 kasan_record_aux_stack+0xe/0x10 irq_work_queue_on+0x6a/0x1c0 pull_rt_task+0x631/0x6b0 do_balance_callbacks+0x56/0x80 __balance_callbacks+0x63/0x90 rt_mutex_setprio+0x349/0x880 rt_mutex_slowunlock+0x22a/0x4e0 rt_spin_unlock+0x49/0x80 uart_write+0x186/0x2b0 do_output_char+0x2e9/0x3a0 n_tty_write+0x306/0x800 file_tty_write.isra.0+0x2af/0x450 tty_write+0x22/0x30 new_sync_write+0x27c/0x3a0 vfs_write+0x3f7/0x5d0 ksys_write+0xd9/0x180 __x64_sys_write+0x43/0x50 do_syscall_64+0x44/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fix it by using kasan_record_aux_stack_noalloc() to avoid the call to alloc_pages(). Link: https://lkml.kernel.org/r/20220402142555.2699582-1-qiang1.zhang@intel.com Signed-off-by:
Zqiang <qiang1.zhang@intel.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 66dd346b ] Qemu unconditionally reports a UUID, which depending on the qemu version is either all-null (which is incorrect but harmless) or contains a single bit set for all controllers. In addition it can also optionally report a eui64 which needs to be manually set. Disable namespace identifiers for Qemu controlles entirely even if in some cases they could be set correctly through manual intervention. Reported-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit a98a945b ] The MAXIO MAP1002/1202 controllers reports completely bogus Namespace identifiers that even change after suspend cycles. Disable using the Identifiers entirely. Reported-by:
金韬 <me@kingtous.cn> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 00ff400e ] Add a quirk to disable using and exporting namespace identifiers for controllers where they are broken beyond repair. The most directly visible problem with non-unique namespace identifiers is that they break the /dev/disk/by-id/ links, with the link for a supposedly unique identifier now pointing to one of multiple possible namespaces that share the same ID, and a somewhat random selection of which one actually shows up. Signed-off-by:
Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit b3d4650d ] When asked to create a path ending '/', but which is not to be a directory (LOOKUP_DIRECTORY not set), filename_create() will never try to create the file. If it doesn't exist, -ENOENT is reported. However, it still passes LOOKUP_CREATE|LOOKUP_EXCL to the filesystems ->lookup() function, even though there is no intent to create. This is misleading and can cause incorrect behaviour. If you try ln -s foo /path/dir/ where 'dir' is a directory on an NFS filesystem which is not currently known in the dcache, this will fail with ENOENT. But as the name is not in the dcache, nfs_lookup gets called with LOOKUP_CREATE|LOOKUP_EXCL and so it returns NULL without performing any lookup, with the expectation that a subsequent call to create the target will be made, and the lookup can be combined with the creation. In the case with a trailing '/' and no LOOKUP_DIRECTORY, that call is never made. Instead filename_create() sees that the dentry is not (yet) positive and returns -ENOENT - even though the directory actually exists. So only set LOOKUP_CREATE|LOOKUP_EXCL if there really is an intent to create, and use the absence of these flags to decide if -ENOENT should be returned. Note that filename_parentat() is only interested in LOOKUP_REVAL, so we split that out and store it in 'reval_flag'. __lookup_hash() then gets reval_flag combined with whatever create flags were determined to be needed. Reviewed-by:
David Disseldorp <ddiss@suse.de> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
NeilBrown <neilb@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Mikulas Patocka authored
[ Upstream commit 932aba1e ] struct stat (defined in arch/x86/include/uapi/asm/stat.h) has 32-bit st_dev and st_rdev; struct compat_stat (defined in arch/x86/include/asm/compat.h) has 16-bit st_dev and st_rdev followed by a 16-bit padding. This patch fixes struct compat_stat to match struct stat. [ Historical note: the old x86 'struct stat' did have that 16-bit field that the compat layer had kept around, but it was changes back in 2003 by "struct stat - support larger dev_t": https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=e95b2065677fe32512a597a79db94b77b90c968d and back in those days, the x86_64 port was still new, and separate from the i386 code, and had already picked up the old version with a 16-bit st_dev field ] Note that we can't change compat_dev_t because it is used by compat_loop_info. Also, if the st_dev and st_rdev values are 32-bit, we don't have to use old_valid_dev to test if the value fits into them. This fixes -EOVERFLOW on filesystems that are on NVMe because NVMe uses the major number 259. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Mike Christie authored
[ Upstream commit 857b0652 ] We set the qedi_ep state to EP_STATE_OFLDCONN_START when the ep is created. Then in qedi_set_path we kick off the offload work. If userspace times out the connection and calls ep_disconnect, qedi will only flush the offload work if the qedi_ep state has transitioned away from EP_STATE_OFLDCONN_START. If we can't connect we will not have transitioned state and will leave the offload work running, and we will free the qedi_ep from under it. This patch just has us init the work when we create the ep, then always flush it. Link: https://lore.kernel.org/r/20220408001314.5014-10-michael.christie@oracle.com Tested-by:
Manish Rangankar <mrangankar@marvell.com> Reviewed-by:
Lee Duncan <lduncan@suse.com> Reviewed-by:
Chris Leech <cleech@redhat.com> Acked-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Mike Christie authored
[ Upstream commit 44ac9710 ] If a offload driver doesn't use the xmit workqueue, then when we are doing ep_disconnect libiscsi can still inject PDUs to the driver. This adds a check for if the connection is bound before trying to inject PDUs. Link: https://lore.kernel.org/r/20220408001314.5014-9-michael.christie@oracle.com Tested-by:
-
Mike Christie authored
[ Upstream commit 5bd85625 ] Move the tx and rx suspend fields into one flags field. Link: https://lore.kernel.org/r/20220408001314.5014-8-michael.christie@oracle.com Tested-by:
-
Mike Christie authored
[ Upstream commit 3c6ae371 ] We can't release the endpoint ID until all references to the endpoint have been dropped or it could be allocated while in use. This has us use an idr instead of looping over all conns to find a free ID and then free the ID when all references have been dropped instead of when the device is only deleted. Link: https://lore.kernel.org/r/20220408001314.5014-4-michael.christie@oracle.com Tested-by:
Wu Bo <wubo40@huawei.com> Signed-off-by:
-
Tomas Melin authored
[ Upstream commit 5ad7f18c ] commit 42983885 ("net: macb: restart tx after tx used bit read") added support for restarting transmission. Restarting tx does not work in case controller asserts TXUBR interrupt and TQBP is already at the end of the tx queue. In that situation, restarting tx will immediately cause assertion of another TXUBR interrupt. The driver will end up in an infinite interrupt loop which it cannot break out of. For cases where TQBP is at the end of the tx queue, instead only clear TX_USED interrupt. As more data gets pushed to the queue, transmission will resume. This issue was observed on a Xilinx Zynq-7000 based board. During stress test of the network interface, driver would get stuck on interrupt loop within seconds or minutes causing CPU to stall. Signed-off-by:
Tomas Melin <tomas.melin@vaisala.com> Tested-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit 42dcbe7d ] The following WARN is triggered from kvm_vm_ioctl_set_clock(): WARNING: CPU: 10 PID: 579353 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:3161 mark_page_dirty_in_slot+0x6c/0x80 [kvm] ... CPU: 10 PID: 579353 Comm: qemu-system-x86 Tainted: G W O 5.16.0.stable #20 Hardware name: LENOVO 20UF001CUS/20UF001CUS, BIOS R1CET65W(1.34 ) 06/17/2021 RIP: 0010:mark_page_dirty_in_slot+0x6c/0x80 [kvm] ... Call Trace: <TASK> ? kvm_write_guest+0x114/0x120 [kvm] kvm_hv_invalidate_tsc_page+0x9e/0xf0 [kvm] kvm_arch_vm_ioctl+0xa26/0xc50 [kvm] ? schedule+0x4e/0xc0 ? __cond_resched+0x1a/0x50 ? futex_wait+0x166/0x250 ? __send_signal+0x1f1/0x3d0 kvm_vm_ioctl+0x747/0xda0 [kvm] ... The WARN was introduced by commit 03c0304a86bc ("KVM: Warn if mark_page_dirty() is called without an active vCPU") but the change seems to be correct (unlike Hyper-V TSC page update mechanism). In fact, there's no real need to actually write to guest memory to invalidate TSC page, this can be done by the first vCPU which goes through kvm_guest_time_update(). Reported-by:
Maxim Levitsky <mlevitsk@redhat.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220407201013.963226-1-vkuznets@redhat.com> Signed-off-by:
-
Xiaoke Wang authored
[ Upstream commit 047ae665 ] kzalloc() is a memory allocation function which can return NULL when some internal memory errors happen. So it is better to check it to prevent potential wrong memory access. Besides, since mdp5_plane_reset() is void type, so we should better set `plane-state` to NULL after releasing it. Signed-off-by:
Xiaoke Wang <xkernel.wang@foxmail.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/481055/ Link: https://lore.kernel.org/r/tencent_8E2A1C78140EE1784AB2FF4B2088CC0AB908@qq.com Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
-
Lv Ruyi authored
[ Upstream commit 1a7eb80d ] Both of of_get_parent() and of_parse_phandle() return node pointer with refcount incremented, use of_node_put() on it to decrease refcount when done. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by:
-
Borislav Petkov authored
[ Upstream commit 6fb3a586 ] Fix: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function ‘brcmf_sdio_drivestrengthinit’: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3798:2: error: case label does not reduce to an integer constant case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17): ^~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3809:2: error: case label does not reduce to an integer constant case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13): ^~~~ See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/Ykx0iRlvtBnKqtbG@zn.tnic Signed-off-by:
-
Borislav Petkov authored
[ Upstream commit dbc2b176 ] Fix: drivers/net/wireless/mediatek/mt76/mt76x2/pci.c: In function ‘mt76x2e_probe’: ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_946’ \ declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 8d3a6c37 ] UBSAN warnings are observed on atlantic driver: [ 294.432996] UBSAN: array-index-out-of-bounds in /build/linux-Qow4fL/linux-5.15.0/drivers/net/ethernet/aquantia/atlantic/aq_nic.c:484:48 [ 294.433695] index 8 is out of range for type 'aq_vec_s *[8]' The ring is dereferenced right before breaking out the loop, to prevent that from happening, only use the index in the loop to fix the issue. BugLink: https://bugs.launchpad.net/bugs/1958770 Tested-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20220408022204.16815-1-kai.heng.feng@canonical.com Signed-off-by:
-
David Howells authored
[ Upstream commit 994fd530 ] Use the IOCB_DIRECT indicator flag on the I/O context rather than checking to see if the file was opened O_DIRECT. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: linux-cifs@vger.kernel.org Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Hongbin Wang authored
[ Upstream commit 7cea5560 ] When kmalloc and dst_cache_init failed, should return ENOMEM rather than ENOBUFS. Signed-off-by:
Hongbin Wang <wh_bin@126.com> Signed-off-by:
-
Rob Herring authored
[ Upstream commit 1bc12d30 ] The common touchscreen properties are all 32-bit, not 16-bit. These properties must not be too important as they are all ignored in case of an error reading them. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/Yk3moe6Hz8ELM0iS@robh.at.kernel.org ' Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Pierre-Louis Bossart authored
[ Upstream commit d52eee98 ] Add missing AlderLake-PS and RaptorLake-S PCI IDs (already in HDaudio and SOF drivers), add comments and regroup by skew. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220406190418.245044-1-pierre-louis.bossart@linux.intel.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Oliver Upton authored
[ Upstream commit 21db8384 ] In order to correctly destroy a VM, all references to the VM must be freed. The arch_timer selftest creates a VGIC for the guest, which itself holds a reference to the VM. Close the GIC FD when cleaning up a VM. Signed-off-by:
Oliver Upton <oupton@google.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220406235615.1447180-4-oupton@google.com Signed-off-by:
-
Xiaoke Wang authored
[ Upstream commit f75e582b ] kzalloc() is a memory allocation function which can return NULL when some internal memory errors happen. So it is better to check it to prevent potential wrong memory access. Signed-off-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/tencent_B3E19486FF39415098B572B7397C2936C309@qq.com Signed-off-by:
-
Borislav Petkov authored
[ Upstream commit 1ef87159 ] Fix: sound/usb/midi.c: In function ‘snd_usbmidi_out_endpoint_create’: sound/usb/midi.c:1389:2: error: case label does not reduce to an integer constant case USB_ID(0xfc08, 0x0101): /* Unknown vendor Cable */ ^~~~ See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. [ A slight correction with parentheses around the argument by tiwai ] Signed-off-by:
-
Jiapeng Chong authored
[ Upstream commit 0284d4d1 ] Eliminate the follow smatch warnings: drivers/platform/x86/samsung-laptop.c:1124 kbd_led_set() warn: unsigned 'value' is never less than zero. Reported-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20220322061830.105579-1-jiapeng.chong@linux.alibaba.com Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Sameer Pujar authored
[ Upstream commit d1da1052 ] This reverts following commit 69125b4b ("reset: tegra-bpmp: Revert Handle errors in BPMP response"). The Tegra194 HDA reset failure is fixed by commit d278dc91 ("ALSA: hda/tegra: Fix Tegra194 HDA reset failure"). The temporary revert of original commit c045ceb5 ("reset: tegra-bpmp: Handle errors in BPMP response") can be removed now. Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/1641995806-15245-1-git-send-email-spujar@nvidia.com Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit da18980a ] Deasserting the reset is vital, therefore bail out in case of error. Suggested-by:
Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
-
