- 02 Jul, 2022 34 commits
-
-
Naveen N. Rao authored
commit 3e35142e upstream. Since commit d1bcae833b32f1 ("ELF: Don't generate unused section symbols") [1], binutils (v2.36+) started dropping section symbols that it thought were unused. This isn't an issue in general, but with kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a separate .text.unlikely section and the section symbol ".text.unlikely" is being dropped. Due to this, recordmcount is unable to find a non-weak symbol in .text.unlikely to generate a relocation record against. Address this by dropping the weak attribute from these functions. Instead, follow the existing pattern of having architectures #define the name of the function they want to override in their headers. [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1 [akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h] Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hsin-Yi Wang authored
commit dd753d96 upstream. Commit 428826f5 ("fdt: add support for rng-seed") moves of_fdt_crc32 from early_init_dt_verify() to early_init_dt_scan() since early_init_dt_scan_chosen() may modify fdt to erase rng-seed. However, arm and some other arch won't call early_init_dt_scan(), they call early_init_dt_verify() then early_init_dt_scan_nodes(). Restore of_fdt_crc32 to early_init_dt_verify() then update it in early_init_dt_scan_chosen() if fdt if updated. Fixes: 428826f5 ("fdt: add support for rng-seed") Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Tested-by:
Will Deacon <will@kernel.org> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Masahiro Yamada authored
commit dbac14a5 upstream. EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because none of the in-tree call-sites (arch/arm/xen/enlighten.c, arch/x86/xen/grant-table.c) is compiled as modular. Fixes: 243848fc ("xen/grant-table: Move xlated_setup_gnttab_pages to common place") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Acked-by:
Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20220606045920.4161881-1-masahiroy@kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Christoph Hellwig authored
commit bf22c9ec upstream. drm_fb_helper_modinit has a lot of boilerplate for what is not very simple functionality. Just open code it in the only caller using IS_ENABLED and IS_MODULE, and skip the find_module check as a request_module is harmless if the module is already loaded (and not other caller has this find_module check either). Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jessica Yu <jeyu@kernel.org> Signed-off-by:
-
Jason A. Donenfeld authored
commit e561e472 upstream. The platform's RNG must be available before random_init() in order to be useful for initial seeding, which in turn means that it needs to be called from setup_arch(), rather than from an init call. Fortunately, each platform already has a setup_arch function pointer, which means it's easy to wire this up. This commit also removes some noisy log messages that don't add much. Fixes: a489043f ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Masahiro Yamada authored
commit 28438794 upstream. Since commit f02e8a65 ("module: Sort exported symbols"), EXPORT_SYMBOL* is placed in the individual section ___ksymtab(_gpl)+<sym> (3 leading underscores instead of 2). Since then, modpost cannot detect the bad combination of EXPORT_SYMBOL and __init/__exit. Fix the .fromsec field. Fixes: f02e8a65 ("module: Sort exported symbols") Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Miaoqian Lin authored
commit 1ba904b6 upstream. of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 415f5914 ("ARM: cns3xxx: initial DT support") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Acked-by:
Krzysztof Halasa <khalasa@piap.pl> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Miaoqian Lin authored
commit 7c7ff68d upstream. of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 1d22924e ("ARM: Add platform support for LSI AXM55xx SoC") Signed-off-by:
-
Miaoqian Lin authored
commit c4c79525 upstream. of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() checks null pointer. Fixes: fce9e5bb ("ARM: EXYNOS: Add support for mapping PMU base address via DT") Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Lucas Stach authored
commit 93a8ba2a upstream. Contrary to what was believed at the time, the ramp delay of 150us is not plenty for the PU LDO with the default step time of 512 pulses of the 24MHz clock. Measurements have shown that after enabling the LDO the voltage on VDDPU_CAP jumps to ~750mV in the first step and after that the regulator executes the normal ramp up as defined by the step size control. This means it takes the regulator between 360us and 370us to ramp up to the nominal 1.15V voltage for this power domain. With the old setting of the ramp delay the power up of the PU GPC domain would happen in the middle of the regulator ramp with the voltage being at around 900mV. Apparently this was enough for most units to properly power up the peripherals in the domain and execute the reset. Some units however, fail to power up properly, especially when the chip is at a low temperature. In that case any access to the GPU registers would yield an incorrect result with no way to recover from this situation. Change the ramp delay to 380us to cover the measured ramp up time with a bit of additional slack. Fixes: 40130d32 ("ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay") Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Jason A. Donenfeld authored
commit f3eac426 upstream. The platform's RNG must be available before random_init() in order to be useful for initial seeding, which in turn means that it needs to be called from setup_arch(), rather than from an init call. Complicating things, however, is that POWER8 systems need some per-cpu state and kmalloc, which isn't available at this stage. So we split things up into an early phase and a later opportunistic phase. This commit also removes some noisy log messages that don't add much. Fixes: a4da0d50 ("powerpc: Implement arch_get_random_long/int() for powernv") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by:
-
Andrew Donnellan authored
commit 7bc08056 upstream. Add a special case to block_rtas_call() to allow the ibm,platform-dump RTAS call through the RTAS filter if the buffer address is 0. According to PAPR, ibm,platform-dump is called with a null buffer address to notify the platform firmware that processing of a particular dump is finished. Without this, on a pseries machine with CONFIG_PPC_RTAS_FILTER enabled, an application such as rtas_errd that is attempting to retrieve a dump will encounter an error at the end of the retrieval process. Fixes: bd59380c ("powerpc/rtas: Restrict RTAS requests from userspace") Cc: stable@vger.kernel.org Reported-by:
Sathvika Vasireddy <sathvika@linux.ibm.com> Signed-off-by:
Andrew Donnellan <ajd@linux.ibm.com> Reviewed-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Reviewed-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
-
Naveen N. Rao authored
commit ec6d0dde upstream. On execve[at], we are zero'ing out most of the thread register state including gpr[0], which contains the syscall number. Due to this, we fail to trigger the syscall exit tracepoint properly. Fix this by retaining gpr[0] in the thread register state. Before this patch: # tail /sys/kernel/debug/tracing/trace cat-123 [000] ..... 61.449351: sys_execve(filename: 7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8) cat-124 [000] ..... 62.428481: sys_execve(filename: 7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8) echo-125 [000] ..... 65.813702: sys_execve(filename: 7fffa6b23378, argv: 7fffa6b233a0, envp: 7fffa6b233b0) echo-125 [000] ..... 65.822214: sys_execveat(fd: 0, filename: 1009ac48, argv: 7ffff65d0c98, envp: 7ffff65d0ca8, flags: 0) After this patch: # tail /sys/kernel/debug/tracing/trace cat-127 [000] ..... 100.416262: sys_execve(filename: 7fffa41b3448, argv: 7fffa41b33e0, envp: 7fffa41b33f8) cat-127 [000] ..... 100.418203: sys_execve -> 0x0 echo-128 [000] ..... 103.873968: sys_execve(filename: 7fffa41b3378, argv: 7fffa41b33a0, envp: 7fffa41b33b0) echo-128 [000] ..... 103.875102: sys_execve -> 0x0 echo-128 [000] ..... 103.882097: sys_execveat(fd: 0, filename: 1009ac48, argv: 7fffd10d2148, envp: 7fffd10d2158, flags: 0) echo-128 [000] ..... 103.883225: sys_execveat -> 0x0 Cc: stable@vger.kernel.org Signed-off-by:
Sumit Dubey2 <Sumit.Dubey2@ibm.com> Signed-off-by:
-
Liang He authored
commit a0117dc9 upstream. In calibrate_ccount(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Cc: stable@vger.kernel.org Signed-off-by:
Liang He <windhl@126.com> Message-Id: <20220617124432.4049006-1-windhl@126.com> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Liang He authored
commit 173940b3 upstream. In machine_setup(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Cc: stable@vger.kernel.org Signed-off-by:
-
Hans de Goede authored
commit 04805839 upstream. Since commit 9bcf15f7 ("iio: adc: axp288: Fix TS-pin handling") we preserve the bias current set by the firmware at boot. This fixes issues we were seeing on various models. Some models like the Nuvision Solo 10 Draw tablet actually need the old hardcoded 80ųA bias current for battery temperature monitoring to work properly. Add a quirk entry for the Nuvision Solo 10 Draw to the DMI quirk table to restore setting the bias current to 80ųA on this model. Fixes: 9bcf15f7 ("iio: adc: axp288: Fix TS-pin handling") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215882 Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220506095040.21008-1-hdegoede@redhat.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Vincent Whitchurch authored
commit 78601726 upstream. Ensure that the irq_work has completed before the trigger is freed. ================================================================== BUG: KASAN: use-after-free in irq_work_run_list Read of size 8 at addr 0000000064702248 by task python3/25 Call Trace: irq_work_run_list irq_work_tick update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt Allocated by task 25: kmem_cache_alloc_trace iio_sysfs_trig_add dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write Freed by task 25: kfree iio_sysfs_trig_remove dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write ================================================================== Fixes: f38bc926 ("staging:iio:sysfs-trigger: Use irq_work to properly active trigger") Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20220519091925.1053897-1-vincent.whitchurch@axis.com Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Zheyu Ma authored
commit b2f5ad97 upstream. The driver should disable regulators when fails at regmap_update_bits(). Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220510092431.1711284-1-zheyuma97@gmail.com Signed-off-by:
-
Haibo Chen authored
commit bf745142 upstream. On fxls8471, after set the reset bit, the device will reset immediately, will not give ACK. So ignore the return value of this reset operation, let the following code logic to check whether the reset operation works. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Fixes: ecabae71 ("iio: mma8452: Initialise before activating") Reviewed-by:
-
Dmitry Rokosov authored
commit e5f3205b upstream. IIO trigger interface function iio_trigger_get() should be called after iio_trigger_register() (or its devm analogue) strictly, because of iio_trigger_get() acquires module refcnt based on the trigger->owner pointer, which is initialized inside iio_trigger_register() to THIS_MODULE. If this call order is wrong, the next iio_trigger_put() (from sysfs callback or "delete module" path) will dereference "default" module refcnt, which is incorrect behaviour. Fixes: 0668a4e4 ("iio: accel: bma180: Fix indio_dev->trig assignment") Signed-off-by:
Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220524181150.9240-2-ddrokosov@sberdevices.ru Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Xu Yang authored
commit b24346a2 upstream. The complete() function may be called even though request is not completed. In this case, it's necessary to check request status so as not to set device address wrongly. Fixes: 10775eb1 ("usb: chipidea: udc: update gadget states according to ch9") cc: <stable@vger.kernel.org> Signed-off-by:
Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20220623030242.41796-1-xu.yang_2@nxp.com Signed-off-by:
-
Baruch Siach authored
[ Upstream commit f1a633b1 ] The documentation missed the "in_" prefix for this IIO_SHARED_BY_DIR entry. Fixes: bf04c1a3 ("iio: adc: vf610: implement configurable conversion modes") Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Acked-by:
Sasha Levin <sashal@kernel.org>
-
Kai-Heng Feng authored
[ Upstream commit 4e0effd9 ] Intel I210 on some Intel Alder Lake platforms can only achieve ~750Mbps Tx speed via iperf. The RR2DCDELAY shows around 0x2xxx DMA delay, which will be significantly lower when 1) ASPM is disabled or 2) SoC package c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx speed can reach to ~950Mbps. According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC", "DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so set it to 1b for "DMA is considered idle when there is no Rx or Tx AND when there are no TLPs indicating that CPU is active detected on the PCIe link (such as the host executes CSR or Configuration register read or write operation)" and performing Tx should also fall under "active CPU on PCIe link" case. In addition to that, commit b6e0c419 ("igb: Move DMA Coalescing init code to separate function.") seems to wrongly changed from enabling E1000_PCIEMISC_LX_DECISION to disabling it, also fix that. Fixes: b6e0c419 ("igb: Move DMA Coalescing init code to separate function.") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220621221056.604304-1-anthony.l.nguyen@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
huhai authored
[ Upstream commit c81aba8f ] commit 979934da ("[PATCH] mips: update IRQ handling for vr41xx") added a function irq_dispatch, and it'll increase irq_err_count when the get_irq callback returns a negative value, but increase irq_err_count in get_irq was not removed. And also, modpost complains once gpio-vr41xx drivers become modules. ERROR: modpost: "irq_err_count" [drivers/gpio/gpio-vr41xx.ko] undefined! So it would be a good idea to remove repetitive increase irq_err_count in get_irq callback. Fixes: 27fdd325 ("MIPS: Update VR41xx GPIO driver to use gpiolib") Fixes: 979934da ("[PATCH] mips: update IRQ handling for vr41xx") Reported-by:
k2ci <kernel-bot@kylinos.cn> Signed-off-by:
huhai <huhai@kylinos.cn> Signed-off-by:
Genjian Zhang <zhanggenjian@kylinos.cn> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Julien Grall authored
[ Upstream commit ecb6237f ] 1 << 31 is undefined. So switch to 1U << 31. Fixes: 5ead97c8 ("xen: Core Xen implementation") Signed-off-by:
Julien Grall <jgrall@amazon.com> Reviewed-by:
-
Jay Vosburgh authored
[ Upstream commit 7a9214f3 ] The bonding ARP monitor fails to decrement send_peer_notif, the number of peer notifications (gratuitous ARP or ND) to be sent. This results in a continuous series of notifications. Correct this by decrementing the counter for each notification. Reported-by:
Jonathan Toppins <jtoppins@redhat.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: b0929915 ("bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor") Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.com/ Tested-by:
-
Macpaul Lin authored
commit 15b694e9 upstream. Add usb product id of the Quectel RM500K module. RM500K provides 2 mandatory interfaces to Linux host after enumeration. - /dev/ttyUSB5: this is a serial interface for control path. User needs to write AT commands to this device node to query status, set APN, set PIN code, and enable/disable the data connection to 5G network. - ethX: this is the data path provided as a RNDIS devices. After the data connection has been established, Linux host can access 5G data network via this interface. "RNDIS": RNDIS + ADB + AT (/dev/ttyUSB5) + MODEM COMs usb-devices output for 0x7001: T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=7001 Rev=00.01 S: Manufacturer=MediaTek Inc. S: Product=USB DATA CARD S: SerialNumber=869206050009672 C: #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Co-developed-by:
Ballon Shi <ballon.shi@quectel.com> Signed-off-by:
Macpaul Lin <macpaul.lin@mediatek.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Yonglin Tan authored
commit 33b29dbb upstream. The EM05-G modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030a Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030a Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Yonglin Tan <yonglin.tan@outlook.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Carlo Lobrano authored
commit 342fc0c3 upstream. Add support for the following Telit LE910Cx composition: 0x1250: rmnet, tty, tty, tty, tty Reviewed-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
Carlo Lobrano <c.lobrano@gmail.com> Link: https://lore.kernel.org/r/20220614075623.2392607-1-c.lobrano@gmail.com Cc: stable@vger.kernel.org Signed-off-by:
-
Jason A. Donenfeld authored
commit c01d4d0a upstream. random.c ratelimits how much it warns about uninitialized urandom reads using __ratelimit(). When the RNG is finally initialized, it prints the number of missed messages due to ratelimiting. It has been this way since that functionality was introduced back in 2018. Recently, cc1e127b ("random: remove ratelimiting for in-kernel unseeded randomness") put a bit more stress on the urandom ratelimiting, which teased out a bug in the implementation. Specifically, when under pressure, __ratelimit() will print its own message and reset the count back to 0, making the final message at the end less useful. Secondly, it does so as a pr_warn(), which apparently is undesirable for people's CI. Fortunately, __ratelimit() has the RATELIMIT_MSG_ON_RELEASE flag exactly for this purpose, so we set the flag. Fixes: 4e00b339 ("random: rate limit unseeded randomness warnings") Cc: stable@vger.kernel.org Reported-by:
Jon Hunter <jonathanh@nvidia.com> Reported-by:
Ron Economos <re@w6rz.net> Tested-by:
-
Nikos Tsironis authored
commit 9ae6e8b1 upstream. During postsuspend dm-era does the following: 1. Archives the current era 2. Commits the metadata, as part of the RPC call for archiving the current era 3. Stops the worker Until the worker stops, it might write to the metadata again. Moreover, these writes are not flushed to disk immediately, but are cached by the dm-bufio client, which writes them back asynchronously. As a result, the committed metadata of a suspended dm-era device might not be consistent with the in-core metadata. In some cases, this can result in the corruption of the on-disk metadata. Suppose the following sequence of events: 1. Load a new table, e.g. a snapshot-origin table, to a device with a dm-era table 2. Suspend the device 3. dm-era commits its metadata, but the worker does a few more metadata writes until it stops, as part of digesting an archived writeset 4. These writes are cached by the dm-bufio client 5. Load the dm-era table to another device. 6. The new instance of the dm-era target loads the committed, on-disk metadata, which don't include the extra writes done by the worker after the metadata commit. 7. Resume the new device 8. The new dm-era target instance starts using the metadata 9. Resume the original device 10. The destructor of the old dm-era target instance is called and destroys the dm-bufio client, which results in flushing the cached writes to disk 11. These writes might overwrite the writes done by the new dm-era instance, hence corrupting its metadata. Fix this by committing the metadata after the worker stops running. stop_worker uses flush_workqueue to flush the current work. However, the work item may re-queue itself and flush_workqueue doesn't wait for re-queued works to finish. This could result in the worker changing the metadata after they have been committed, or writing to the metadata concurrently with the commit in the postsuspend thread. Use drain_workqueue instead, which waits until the work and all re-queued works finish. Fixes: eec40579 ("dm: add era target") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by:
Mike Snitzer <snitzer@kernel.org> Signed-off-by:
-
Edward Wu authored
commit 540a92bf upstream. Add flags value to check the result of ata completion Fixes: 255c03d1 ("libata: Add tracepoints") Cc: stable@vger.kernel.org Signed-off-by:
Edward Wu <edwardwu@realtek.com> Signed-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit 534d2eaf upstream. It used to be that mix_interrupt_randomness() would credit 1 bit each time it ran, and so add_interrupt_randomness() would schedule mix() to run every 64 interrupts, a fairly arbitrary number, but nonetheless considered to be a decent enough conservative estimate. Since e3e33fc2 ("random: do not use input pool from hard IRQs"), mix() is now able to credit multiple bits, depending on the number of calls to add(). This was done for reasons separate from this commit, but it has the nice side effect of enabling this patch to schedule mix() less often. Currently the rules are: a) Credit 1 bit for every 64 calls to add(). b) Schedule mix() once a second that add() is called. c) Schedule mix() once every 64 calls to add(). Rules (a) and (c) no longer need to be coupled. It's still important to have _some_ value in (c), so that we don't "over-saturate" the fast pool, but the once per second we get from rule (b) is a plenty enough baseline. So, by increasing the 64 in rule (c) to something larger, we avoid calling queue_work_on() as frequently during irq storms. This commit changes that 64 in rule (c) to be 1024, which means we schedule mix() 16 times less often. And it does *not* need to change the 64 in rule (a). Fixes: 58340f8e ("random: defer fast pool mixing to worker") Cc: stable@vger.kernel.org Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Jiri Slaby authored
commit ff2047fb upstream. Drop support for these ioctls: * PIO_FONT, PIO_FONTX * GIO_FONT, GIO_FONTX * PIO_FONTRESET As was demonstrated by commit 90bfdeef (tty: make FONTX ioctl use the tty pointer they were actually passed), these ioctls are not used from userspace, as: 1) they used to be broken (set up font on current console, not the open one) and racy (before the commit above) 2) KDFONTOP ioctl is used for years instead Note that PIO_FONTRESET is defunct on most systems as VGA_CONSOLE is set on them for ages. That turns on BROKEN_GRAPHICS_PROGRAMS which makes PIO_FONTRESET just return an error. We are removing KD_FONT_FLAG_OLD here as it was used only by these removed ioctls. kd.h header exists both in kernel and uapi headers, so we can remove the kernel one completely. Everyone includeing kd.h will now automatically get the uapi one. There are now unused definitions of the ioctl numbers and "struct consolefontdesc" in kd.h, but as it is a uapi header, I am not touching these. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210105120239.28031-8-jslaby@suse.cz Cc: guodaxing <guodaxing@huawei.com> Signed-off-by:
-
- 25 Jun, 2022 6 commits
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220623164343.132308638@linuxfoundation.org Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Willy Tarreau authored
commit e8161345 upstream. In commit 190cc824 ("tcp: change source port randomizarion at connect() time"), the table_perturb[] array was introduced and an index was taken from the port_offset via hash_32(). But it turns out that hash_32() performs a multiplication while the input here comes from the output of SipHash in secure_seq, that is well distributed enough to avoid the need for yet another hash. Suggested-by:
Amit Klein <aksecurity@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Willy Tarreau authored
commit 4c2c8f03 upstream. Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately identify a client by forcing it to emit only 40 times more connections than there are entries in the table_perturb[] table. The previous two improvements consisting in resalting the secret every 10s and adding randomness to each port selection only slightly improved the situation, and the current value of 2^8 was too small as it's not very difficult to make a client emit 10k connections in less than 10 seconds. Thus we're increasing the perturb table from 2^8 to 2^16 so that the same precision now requires 2.6M connections, which is more difficult in this time frame and harder to hide as a background activity. The impact is that the table now uses 256 kB instead of 1 kB, which could mostly affect devices making frequent outgoing connections. However such components usually target a small set of destinations (load balancers, database clients, perf assessment tools), and in practice only a few entries will be visited, like before. A live test at 1 million connections per second showed no performance difference from the previous value. Reported-by:
Moshe Kol <moshe.kol@mail.huji.ac.il> Reported-by:
Yossi Gilad <yossi.gilad@mail.huji.ac.il> Reported-by:
-
Willy Tarreau authored
commit e9261476 upstream. We'll need to further increase the size of this table and it's likely that at some point its size will not be suitable anymore for a static table. Let's allocate it on boot from inet_hashinfo2_init(), which is called from tcp_init(). Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by:
-
Willy Tarreau authored
commit ca7af040 upstream. Here we're randomly adding between 0 and 7 random increments to the selected source port in order to add some noise in the source port selection that will make the next port less predictable. With the default port range of 32768-60999 this means a worst case reuse scenario of 14116/8=1764 connections between two consecutive uses of the same port, with an average of 14116/4.5=3137. This code was stressed at more than 800000 connections per second to a fixed target with all connections closed by the client using RSTs (worst condition) and only 2 connections failed among 13 billion, despite the hash being reseeded every 10 seconds, indicating a perfectly safe situation. Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by:
-
Willy Tarreau authored
commit 9e9b70ae upstream. Amit Klein suggests that we use different parts of port_offset for the table's index and the port offset so that there is no direct relation between them. Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by:
-
