- 10 Nov, 2018 40 commits
-
-
Larry Finger authored
[ Upstream commit 54328e64 ] In commit 1277fa2a ("rtlwifi: Remove the clear interrupt routine from all drivers"), the code that cleared all interrupt enable bits before setting them was removed for all PCI drivers. This fixed an issue that caused TX to be blocked for 3-5 seconds. On some RTL8821AE units, this change causes soft lockups to occur on boot. For that reason, the portion of the earlier commit that applied to rtl8821ae is reverted. Kernels 4.1 and newer are affected. See http://marc.info/?l=linux-wireless&m=144373370103285&w=2 and https://bugzilla.opensuse.org/show_bug.cgi?id=944978 for two cases where this regression affected user systems. Note that this bug does not appear on any of the developer's setups. For those users whose systems are affected by the TX blockage, but do not lock up on boot, a module parameter is added to disable the interrupt clear Fixes: 1277fa2a ("rtlwifi: Remove the clear interrupt routine from all drivers") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [V4.1+] Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chris Mi authored
[ Upstream commit 7f071998 ] # ./tdc_batch.py -h usage: tdc_batch.py [-h] [-n NUMBER] [-o] [-s] [-p] device file TC batch file generator positional arguments: device device name file batch file name optional arguments: -h, --help show this help message and exit -n NUMBER, --number NUMBER how many lines in batch file -o, --skip_sw skip_sw (offload), by default skip_hw -s, --share_action all filters share the same action -p, --prio all filters have different prio Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Lucas Bates <lucasb@mojatatu.com> Signed-off-by:
Chris Mi <chrism@mellanox.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Brian Norris authored
[ Upstream commit f3c63795 ] Commit 073db4a5 ("mtd: fix: avoid race condition when accessing mtd->usecount") fixed a race condition but due to poor ordering of the mutex acquisition, introduced a potential deadlock. The deadlock can occur, for example, when rmmod'ing the m25p80 module, which will delete one or more MTDs, along with any corresponding mtdblock devices. This could potentially race with an acquisition of the block device as follows. -> blktrans_open() -> mutex_lock(&dev->lock); -> mutex_lock(&mtd_table_mutex); -> del_mtd_device() -> mutex_lock(&mtd_table_mutex); -> blktrans_notify_remove() -> del_mtd_blktrans_dev() -> mutex_lock(&dev->lock); This is a classic (potential) ABBA deadlock, which can be fixed by making the A->B ordering consistent everywhere. There was no real purpose to the ordering in the original patch, AFAIR, so this shouldn't be a problem. This ordering was actually already present in del_mtd_blktrans_dev(), for one, where the function tried to ensure that its caller already held mtd_table_mutex before it acquired &dev->lock: if (mutex_trylock(&mtd_table_mutex)) { mutex_unlock(&mtd_table_mutex); BUG(); } So, reverse the ordering of acquisition of &dev->lock and &mtd_table_mutex so we always acquire mtd_table_mutex first. Snippets of the lockdep output follow: # modprobe -r m25p80 [ 53.419251] [ 53.420838] ====================================================== [ 53.427300] [ INFO: possible circular locking dependency detected ] [ 53.433865] 4.3.0-rc6 #96 Not tainted [ 53.437686] ------------------------------------------------------- [ 53.444220] modprobe/372 is trying to acquire lock: [ 53.449320] (&new->lock){+.+...}, at: [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc [ 53.457271] [ 53.457271] but task is already holding lock: [ 53.463372] (mtd_table_mutex){+.+.+.}, at: [<c0439994>] del_mtd_device+0x18/0x100 [ 53.471321] [ 53.471321] which lock already depends on the new lock. [ 53.471321] [ 53.479856] [ 53.479856] the existing dependency chain (in reverse order) is: [ 53.487660] -> #1 (mtd_table_mutex){+.+.+.}: [ 53.492331] [<c043fc5c>] blktrans_open+0x34/0x1a4 [ 53.497879] [<c01afce0>] __blkdev_get+0xc4/0x3b0 [ 53.503364] [<c01b0bb8>] blkdev_get+0x108/0x320 [ 53.508743] [<c01713c0>] do_dentry_open+0x218/0x314 [ 53.514496] [<c0180454>] path_openat+0x4c0/0xf9c [ 53.519959] [<c0182044>] do_filp_open+0x5c/0xc0 [ 53.525336] [<c0172758>] do_sys_open+0xfc/0x1cc [ 53.530716] [<c000f740>] ret_fast_syscall+0x0/0x1c [ 53.536375] -> #0 (&new->lock){+.+...}: [ 53.540587] [<c063f124>] mutex_lock_nested+0x38/0x3cc [ 53.546504] [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc [ 53.552606] [<c043f164>] blktrans_notify_remove+0x7c/0x84 [ 53.558891] [<c04399f0>] del_mtd_device+0x74/0x100 [ 53.564544] [<c043c670>] del_mtd_partitions+0x80/0xc8 [ 53.570451] [<c0439aa0>] mtd_device_unregister+0x24/0x48 [ 53.576637] [<c046ce6c>] spi_drv_remove+0x1c/0x34 [ 53.582207] [<c03de0f0>] __device_release_driver+0x88/0x114 [ 53.588663] [<c03de19c>] device_release_driver+0x20/0x2c [ 53.594843] [<c03dd9e8>] bus_remove_device+0xd8/0x108 [ 53.600748] [<c03dacc0>] device_del+0x10c/0x210 [ 53.606127] [<c03dadd0>] device_unregister+0xc/0x20 [ 53.611849] [<c046d878>] __unregister+0x10/0x20 [ 53.617211] [<c03da868>] device_for_each_child+0x50/0x7c [ 53.623387] [<c046eae8>] spi_unregister_master+0x58/0x8c [ 53.629578] [<c03e12f0>] release_nodes+0x15c/0x1c8 [ 53.635223] [<c03de0f8>] __device_release_driver+0x90/0x114 [ 53.641689] [<c03de900>] driver_detach+0xb4/0xb8 [ 53.647147] [<c03ddc78>] bus_remove_driver+0x4c/0xa0 [ 53.652970] [<c00cab50>] SyS_delete_module+0x11c/0x1e4 [ 53.658976] [<c000f740>] ret_fast_syscall+0x0/0x1c [ 53.664621] [ 53.664621] other info that might help us debug this: [ 53.664621] [ 53.672979] Possible unsafe locking scenario: [ 53.672979] [ 53.679169] CPU0 CPU1 [ 53.683900] ---- ---- [ 53.688633] lock(mtd_table_mutex); [ 53.692383] lock(&new->lock); [ 53.698306] lock(mtd_table_mutex); [ 53.704658] lock(&new->lock); [ 53.707946] [ 53.707946] *** DEADLOCK *** Fixes: 073db4a5 ("mtd: fix: avoid race condition when accessing mtd->usecount") Reported-by:
Felipe Balbi <balbi@ti.com> Tested-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lars-Peter Clausen authored
[ Upstream commit a798c24a ] Commit fdb6eb0a ("ASoC: dapm: Modify widget stream name according to prefix") fixed the case where a DAPM route between a DAI widget and a DAC/ADC/AIF widget with a matching stream name was not created when the DAPM context was using a prefix. Unfortunately the patch introduced a few issues on its own like leaking the dynamically allocated stream name memory and also not checking whether the allocation succeeded in the first place. It is also incomplete in that it still does not handle the case where stream name of the widget is a substring of the stream name of the DAI, which is explicitly allowed and works fine if no DAPM prefix is used. Revert the commit and take a slightly different approach to solving the issue. Instead of comparing the widget's stream name to the name of the DAI widget compare it to the stream name of the DAI widget. The stream name of the DAI widget is identical to the name of the DAI widget except that it wont have the DAPM prefix added. So this approach behaves identical regardless to whether the DAPM context uses a prefix or not. We don't have to worry about potentially matching with a widget with the same stream name, but from a different DAPM context with a different prefix, since the code already makes sure that both the DAI widget and the matched widget are from the same DAPM context. Fixes: fdb6eb0a ("ASoC: dapm: Modify widget stream name according to prefix") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Daniel Borkmann authored
[ Upstream commit 7829fb09 ] In commit 0b053c95 ("lib: memzero_explicit: use barrier instead of OPTIMIZER_HIDE_VAR"), we made memzero_explicit() more robust in case LTO would decide to inline memzero_explicit() and eventually find out it could be elimiated as dead store. While using barrier() works well for the case of gcc, recent efforts from LLVMLinux people suggest to use llvm as an alternative to gcc, and there, Stephan found in a simple stand-alone user space example that llvm could nevertheless optimize and thus elimitate the memset(). A similar issue has been observed in the referenced llvm bug report, which is regarded as not-a-bug. Based on some experiments, icc is a bit special on its own, while it doesn't seem to eliminate the memset(), it could do so with an own implementation, and then result in similar findings as with llvm. The fix in this patch now works for all three compilers (also tested with more aggressive optimization levels). Arguably, in the current kernel tree it's more of a theoretical issue, but imho, it's better to be pedantic about it. It's clearly visible with gcc/llvm though, with the below code: if we would have used barrier() only here, llvm would have omitted clearing, not so with barrier_data() variant: static inline void memzero_explicit(void *s, size_t count) { memset(s, 0, count); barrier_data(s); } int main(void) { char buff[20]; memzero_explicit(buff, sizeof(buff)); return 0; } $ gcc -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x0000000000400400 <+0>: lea -0x28(%rsp),%rax 0x0000000000400405 <+5>: movq $0x0,-0x28(%rsp) 0x000000000040040e <+14>: movq $0x0,-0x20(%rsp) 0x0000000000400417 <+23>: movl $0x0,-0x18(%rsp) 0x000000000040041f <+31>: xor %eax,%eax 0x0000000000400421 <+33>: retq End of assembler dump. $ clang -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x00000000004004f0 <+0>: xorps %xmm0,%xmm0 0x00000000004004f3 <+3>: movaps %xmm0,-0x18(%rsp) 0x00000000004004f8 <+8>: movl $0x0,-0x8(%rsp) 0x0000000000400500 <+16>: lea -0x18(%rsp),%rax 0x0000000000400505 <+21>: xor %eax,%eax 0x0000000000400507 <+23>: retq End of assembler dump. As gcc, clang, but also icc defines __GNUC__, it's sufficient to define this in compiler-gcc.h only to be picked up. For a fallback or otherwise unsupported compiler, we define it as a barrier. Similarly, for ecc which does not support gcc inline asm. Reference: https://llvm.org/bugs/show_bug.cgi?id=15495 Reported-by:
Stephan Mueller <smueller@chronox.de> Tested-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Stephan Mueller <smueller@chronox.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: mancha security <mancha1@zoho.com> Cc: Mark Charlebois <charlebm@gmail.com> Cc: Behan Webster <behanw@converseincode.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sylwester Nawrocki authored
[ Upstream commit a96d3b75 ] Commit b5a099c6 "net: ethernet: davicom: fix devicetree irq resource" causes an interrupt storm after the ethernet interface is activated on S3C24XX platform (ARM non-dt), due to the interrupt trigger type not being set properly. It seems, after adding parsing of IRQ flags in commit 7085a740 "drivers: platform: parse IRQ flags from resources", there is no path for non-dt platforms where irq_set_type callback could be invoked when we don't pass the trigger type flags to the request_irq() call. In case of a board where the regression is seen the interrupt trigger type flags are passed through a platform device's resource and it is not currently handled properly without passing the irq trigger type flags to the request_irq() call. In case of OF an of_irq_get() call within platform_get_irq() function seems to be ensuring required irq_chip setup, but there is no equivalent code for non OF/ACPI platforms. This patch mostly restores irq trigger type setting code which has been removed in commit ("net: ethernet: davicom: fix devicetree irq resource"). Fixes: b5a099c6 ("net: ethernet: davicom: fix devicetree irq resource") Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ezequiel Garcia authored
[ Upstream commit 7363cb7d ] cpu_set was removed (along with a bunch of cpumask helpers) by commit 2f0f267e ("cpumask: remove deprecated functions."). Fix this by replacing cpu_set with cpumask_set_cpu. Without this fix the following error is triggered when CONFIG_MIPS_MT_FPAFF=y. arch/mips/kernel/smp-cps.c: In function 'cps_smp_setup': arch/mips/kernel/smp-cps.c:95:3: error: implicit declaration of function 'cpu_set' [-Werror=implicit-function-declaration] Fixes: 90db024f ("MIPS: smp-cps: cpu_set FPU mask if FPU present") Signed-off-by:
Ezequiel Garcia <ezequiel.garcia@imgtec.com> Acked-by:
Niklas Cassel <niklass@axis.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9912/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Srikar Dronamraju authored
[ Upstream commit 2b42b09b ] With commit: e1e455f4 (perf tools: Work around lack of sched_getcpu in glibc < 2.6), perf_bench numa mem with -c or -m option is not able to correctly calculate convergence. With the above commit, sched_getcpu always seems to return -1. The intention of commit e1e455f4 was to add a sched_getcpu in glibc < 2.6. Hence keep the sched_getcpu definition under an ifdef. This regression happened occurred between v4.0 and v4.1 Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vinson Lee <vlee@twitter.com> Fixes: e1e455f4 ("perf tools: Work around lack of sched_getcpu in glibc < 2.6") Link: http://lkml.kernel.org/r/20150624111004.GA5220@linux.vnet.ibm.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Robert Jarzmik authored
[ Upstream commit b5a099c6 ] The dm9000 driver doesn't work in at least one device-tree configuration, spitting an error message on irq resource : [ 1.062495] dm9000 8000000.ethernet: insufficient resources [ 1.068439] dm9000 8000000.ethernet: not found (-2). [ 1.073451] dm9000: probe of 8000000.ethernet failed with error -2 The reason behind is that the interrupt might be provided by a gpio controller, not probed when dm9000 is probed, and needing the probe deferral mechanism to apply. Currently, the interrupt is directly taken from resources. This patch changes this to use the more generic platform_get_irq(), which handles the deferral. Moreover, since commit Fixes: 7085a740 ("drivers: platform: parse IRQ flags from resources"), the interrupt trigger flags are honored in platform_get_irq(), so remove the needless code in dm9000. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Acked-by:
Marcel Ziswiler <marcel@ziswiler.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by:
Sergei Ianovich <ynvich@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Theodore Ts'o authored
[ Upstream commit b9576fc3 ] The xfstests test suite assumes that an attempt to collapse range on the range (0, 1) will return EOPNOTSUPP if the file system does not support collapse range. Commit 280227a7 : "ext4: move check under lock scope to close a race" broke this, and this caused xfstests to fail when run when testing file systems that did not have the extents feature enabled. Reported-by:
Eric Whitney <enwlinux@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jisheng Zhang authored
[ Upstream commit e43d0189 ] Commit b253149b ("sched/idle/x86: Restore mwait_idle() to fix boot hangs, to improve power savings and to improve performance") restores mwait_idle(), but the trace_cpu_idle related calls are missing. This causes powertop on my old desktop powered by Intel Core2 E6550 to report zero wakeups and zero events. Add them back to restore the proper behaviour. Fixes: b253149b ("sched/idle/x86: Restore mwait_idle() to ...") Signed-off-by:
Jisheng Zhang <jszhang@marvell.com> Cc: <len.brown@intel.com> Cc: stable@vger.kernel.org # 4.1 Link: http://lkml.kernel.org/r/1440046479-4262-1-git-send-email-jszhang@marvell.com Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Stefan Agner authored
[ Upstream commit d68827c6 ] Commit 8e4934c6 ("tty: serial: fsl_lpuart: clear receive flag on FIFO flush") implemented clearing of the receive flag by reading the status register only. It turned out that even though we flush the FIFO afterwards, a explicit read of the data register is still required. This leads to a FIFO underrun. To avoid this, follow the advice in the overrun "Operation section": Unconditionally clear RXUF after using RXFLUSH. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alex Williamson authored
[ Upstream commit 46ebb7af ] This continues the attempt to fix commit fb170fb4 ("iommu/vt-d: Introduce helper functions to make code symmetric for readability"). The previous attempt in commit 71684406 ("iommu/vt-d: Detach domain *only* from attached iommus") overlooked the fact that dmar_domain.iommu_bmp gets cleared for VM domains when devices are detached: intel_iommu_detach_device domain_remove_one_dev_info domain_detach_iommu The domain is detached from the iommu, but the iommu is still attached to the domain, for whatever reason. Thus when we get to domain_exit(), we can't rely on iommu_bmp for VM domains to find the active iommus, we must check them all. Without that, the corresponding bit in intel_iommu.domain_ids doesn't get cleared and repeated VM domain creation and destruction will run out of domain IDs. Meanwhile we still can't call iommu_detach_domain() on arbitrary non-VM domains or we risk clearing in-use domain IDs, as 71684406 attempted to address. It's tempting to modify iommu_detach_domain() to test the domain iommu_bmp, but the call ordering from domain_remove_one_dev_info() prevents it being able to work as fb170fb4 seems to have intended. Caching of unused VM domains on the iommu object seems to be the root of the problem, but this code is far too fragile for that kind of rework to be proposed for stable, so we simply revert this chunk to its state prior to fb170fb4. Fixes: fb170fb4 ("iommu/vt-d: Introduce helper functions to make code symmetric for readability") Fixes: 71684406 ("iommu/vt-d: Detach domain *only* from attached iommus") Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: stable@vger.kernel.org # v3.17+ Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eugenia Emantayev authored
[ Upstream commit fc9f5ea9 ] Service task is responsible for other tasks in addition to timestamping overflow check. Launch it even if timestamping is not supported by device. Fixes: 07841f9d ('net/mlx4_en: Schedule napi when RX buffers allocation fails') Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marc Zyngier authored
[ Upstream commit 90f6e150 ] We don't hold the mmap_sem while searching for the VMAs when we try to unmap each memslot for a VM. Fix this properly to avoid unexpected results. Fixes: commit 957db105 ("arm/arm64: KVM: Introduce stage2_unmap_vm") Cc: stable@vger.kernel.org # v3.19+ Reviewed-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Junichi Nomura authored
[ Upstream commit 2a708cff ] __dm_destroy() takes io_barrier SRCU lock (dm_get_live_table) and suspend_lock in reverse order. Doing so can cause AB-BA deadlock: __dm_destroy dm_swap_table --------------------------------------------------- mutex_lock(suspend_lock) dm_get_live_table() srcu_read_lock(io_barrier) dm_sync_table() synchronize_srcu(io_barrier) .. waiting for dm_put_live_table() mutex_lock(suspend_lock) .. waiting for suspend_lock Fix this by taking the locks in proper order. Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Fixes: ab7c7bb6 ("dm: hold suspend_lock while suspending device during device deletion") Acked-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Uwe Kleine-König authored
[ Upstream commit 9911a2d5 ] The code in pinctrl-imx.c only works correctly if in the imx_pinctrl_soc_info passed to imx_pinctrl_probe we have: info->pins[i].number = i conf_reg(info->pins[i]) = 4 * i (which conf_reg(pin) being the offset of the pin's configuration register). When the imx25 specific part was introduced in b4a87c9b ("pinctrl: pinctrl-imx: add imx25 pinctrl driver") we had: info->pins[i].number = i + 1 conf_reg(info->pins[i]) = 4 * i . Commit 34027ca2 ("pinctrl: imx25: fix numbering for pins") tried to fix that but made the situation: info->pins[i-1].number = i conf_reg(info->pins[i-1]) = 4 * i which is hardly better but fixed the error seen back then. So insert another reserved entry in the array to finally yield: info->pins[i].number = i conf_reg(info->pins[i]) = 4 * i Fixes: 34027ca2 ("pinctrl: imx25: fix numbering for pins") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Filipe Manana authored
[ Upstream commit b659ef02 ] Commit 3a8b36f3 ("Btrfs: fix data loss in the fast fsync path") added a performance regression for that causes an unnecessary sync of the log trees (fs/subvol and root log trees) when 2 consecutive fsyncs are done against a file, without no writes or any metadata updates to the inode in between them and if a transaction is committed before the second fsync is called. Huang Ying reported this to lkml (https://lkml.org/lkml/2015/3/18/99) after a test sysbench test that measured a -62% decrease of file io requests per second for that tests' workload. The test is: echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor mkfs -t btrfs /dev/sda2 mount -t btrfs /dev/sda2 /fs/sda2 cd /fs/sda2 for ((i = 0; i < 1024; i++)); do fallocate -l 67108864 testfile.$i; done sysbench --test=fileio --max-requests=0 --num-threads=4 --max-time=600 \ --file-test-mode=rndwr --file-total-size=68719476736 --file-io-mode=sync \ --file-num=1024 run A test on kvm guest, running a debug kernel gave me the following results: Without 3a8b36f3: 16.01 reqs/sec With 3a8b36f3: 3.39 reqs/sec With 3a8b36f3 and this patch: 16.04 reqs/sec Reported-by:
Huang Ying <ying.huang@intel.com> Tested-by:
Huang, Ying <ying.huang@intel.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lorenzo Pieralisi authored
[ Upstream commit feb28979 ] Commit d2be00c0 ("of/pci: Free resources on failure in of_pci_get_host_bridge_resources()") fixed the error path so it frees everything on the "resources" list. That list includes the bus_range, so we should not free it again. Remove the superfluous free of bus_range. [bhelgaas: changelog] Fixes: d2be00c0 ("of/pci: Free resources on failure in of_pci_get_host_bridge_resources()") Reported-by:
Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Joerg Roedel authored
[ Upstream commit d97eb896 ] When an interrupt is migrated away from a cpu it will stay in its vector_irq array until smp_irq_move_cleanup_interrupt succeeded. The cfg->move_in_progress flag is cleared already when the IPI was sent. When the interrupt is destroyed after migration its 'struct irq_desc' is freed and the vector_irq arrays are cleaned up. But since cfg->move_in_progress is already 0 the references at cpus before the last migration will not be cleared. So this would leave a reference to an already destroyed irq alive. When the cpu is taken down at this point, the check_irq_vectors_for_cpu_disable() function finds a valid irq number in the vector_irq array, but gets NULL for its descriptor and dereferences it, causing a kernel panic. This has been observed on real systems at shutdown. Add a check to check_irq_vectors_for_cpu_disable() for a valid 'struct irq_desc' to prevent this issue. Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Jiang Liu <jiang.liu@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Yinghai Lu <yinghai@kernel.org> Cc: alnovak@suse.com Cc: joro@8bytes.org Link: http://lkml.kernel.org/r/20150204132754.GA10078@suse.de Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Paul E. McKenney authored
[ Upstream commit c0135d07 ] If the scheduling-clock interrupt sets the current tasks need_qs flag, but if the current CPU passes through a quiescent state in the meantime, then rcu_preempt_qs() will fail to clear the need_qs flag, which can fool RCU into thinking that additional rcu_read_unlock_special() processing is needed. This commit therefore clears the need_qs flag before checking for additional processing. For this problem to occur, we need rcu_preempt_data.passed_quiesce equal to true and current->rcu_read_unlock_special.b.need_qs also equal to true. This condition can occur as follows: 1. CPU 0 is aware of the current preemptible RCU grace period, but has not yet passed through a quiescent state. Among other things, this means that rcu_preempt_data.passed_quiesce is false. 2. Task A running on CPU 0 enters a preemptible RCU read-side critical section. 3. CPU 0 takes a scheduling-clock interrupt, which notices the RCU read-side critical section and the need for a quiescent state, and thus sets current->rcu_read_unlock_special.b.need_qs to true. 4. Task A is preempted, enters the scheduler, eventually invoking rcu_preempt_note_context_switch() which in turn invokes rcu_preempt_qs(). Because rcu_preempt_data.passed_quiesce is false, control enters the body of the "if" statement, which sets rcu_preempt_data.passed_quiesce to true. 5. At this point, CPU 0 takes an interrupt. The interrupt handler contains an RCU read-side critical section, and the rcu_read_unlock() notes that current->rcu_read_unlock_special is nonzero, and thus invokes rcu_read_unlock_special(). 6. Once in rcu_read_unlock_special(), the fact that current->rcu_read_unlock_special.b.need_qs is true becomes apparent, so rcu_read_unlock_special() invokes rcu_preempt_qs(). Recursively, given that we interrupted out of that same function in the preceding step. 7. Because rcu_preempt_data.passed_quiesce is now true, rcu_preempt_qs() does nothing, and simply returns. 8. Upon return to rcu_read_unlock_special(), it is noted that current->rcu_read_unlock_special is still nonzero (because the interrupted rcu_preempt_qs() had not yet gotten around to clearing current->rcu_read_unlock_special.b.need_qs). 9. Execution proceeds to the WARN_ON_ONCE(), which notes that we are in an interrupt handler and thus duly splats. The solution, as noted above, is to make rcu_read_unlock_special() clear out current->rcu_read_unlock_special.b.need_qs after calling rcu_preempt_qs(). The interrupted rcu_preempt_qs() will clear it again, but this is harmless. The worst that happens is that we clobber another attempt to set this field, but this is not a problem because we just got done reporting a quiescent state. Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Fix embarrassing build bug noted by Sasha Levin. ] Tested-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jeff Layton authored
[ Upstream commit 5d05e54a ] Chuck pointed out a problem that crept in with commit 6ffa30d3 (nfs: don't call blocking operations while !TASK_RUNNING). Linux counts tasks in uninterruptible sleep against the load average, so this caused the system's load average to be pinned at at least 1 when there was a NFSv4.1+ mount active. Not a huge problem, but it's probably worth fixing before we get too many complaints about it. This patch converts the code back to use TASK_INTERRUPTIBLE sleep, simply has it flush any signals on each loop iteration. In practice no one should really be signalling this thread at all, so I think this is reasonably safe. With this change, there's also no need to game the hung task watchdog so we can also convert the schedule_timeout call back to a normal schedule. Cc: <stable@vger.kernel.org> Reported-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Jeff Layton <jeff.layton@primarydata.com> Tested-by:
Chuck Lever <chuck.lever@oracle.com> Fixes: commit 6ffa30d3 (“nfs: don't call blocking . . .”) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Daniel Borkmann authored
[ Upstream commit 025331df ] When allocating rtnl dump messages, struct ifla_port_vsi is never dumped, so we can save header plus payload in rtnl_port_size(). Infact, attribute IFLA_PORT_VSI_TYPE and struct ifla_port_vsi are not used anywhere in the kernel. We only need to keep the nla policy should applications in user space be filling this out. Same NLA_BINARY issue exists as was fixed in 364d5716 ("rtnetlink: ifla_vf_policy: fix misuses of NLA_BINARY") and others, but then again IFLA_PORT_VSI_TYPE is not used anywhere, so just add a comment that it's unused. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jan Kara authored
[ Upstream commit 7e08da50 ] Currently quota format that supports 64-bit usage sets maximum quota limit as 2^64-1. However quota core code uses signed numbers to track usage and even limits themselves are stored in long long. Checking of maximum allowable limits worked by luck until commit 14bf61ff (quota: Switch ->get_dqblk() and ->set_dqblk() to use bytes as space units) because variable we compared with was unsigned. After that commit the type we compared against changed to signed and thus checks for maximum limits with the newest VFS quota format started to refuse any non-negative value. Later the problem was inadvertedly fixed by commit b10a0819 (quota: Store maximum space limit in bytes) because we started to compare against unsigned type as well. Fix possible future problems of this kind by setting maximum limits to 2^63-1 to avoid overflow issues. Reported-by:
Carlos Carvalho <carlos@fisica.ufpr.br> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Heiko Stübner authored
[ Upstream commit a5e1baf7 ] Lockdep reported a possible deadlock between the cpuclk lock and for example the i2c driver. CPU0 CPU1 ---- ---- lock(clk_lock); local_irq_disable(); lock(&(&i2c->lock)->rlock); lock(clk_lock); <Interrupt> lock(&(&i2c->lock)->rlock); *** DEADLOCK *** The generic clock-types of the core ccf already use spin_lock_irqsave when touching clock registers, so do the same for the cpuclk. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Michael Turquette <mturquette@linaro.org> [mturquette@linaro.org: removed initialization of "flags"] Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Abhilash Kesavan authored
[ Upstream commit 25217fef ] The arndale-octa board was giving "imprecise external aborts" during boot-up with MCPM enabled. CCI enablement of the boot cluster was found to be the cause of these aborts (possibly because the secure f/w was not allowing it). Hence, disable CCI for the arndale-octa board. Signed-off-by:
Abhilash Kesavan <a.kesavan@samsung.com> Tested-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
Kevin Hilman <khilman@linaro.org> Tested-by:
Tyler Baker <tyler.baker@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Abhilash Kesavan authored
[ Upstream commit 896ddd60 ] The arm-cci driver completes the probe sequence even if the cci node is marked as disabled. Add a check in the driver to honour the cci status in the device tree. Signed-off-by:
Abhilash Kesavan <a.kesavan@samsung.com> Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Nicolas Pitre <nico@linaro.org> Tested-by:
Sudeep Holla <sudeep.holla@arm.com> Tested-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Namhyung Kim authored
[ Upstream commit 813ccd15 ] Currently the symbol structure is allocated with symbol_conf.priv_size to carry sideband information like annotation, map browser on TUI and sort-by-name tree node. So retrieving these information from symbol needs to care about the details of such placement. However the annotation code just assumes that the symbol is placed after the struct annotation. But actually there's other info between them. So accessing those struct will lead to an undefined behavior (usually a crash) after they write their info to the same location. To reproduce the problem, please follow the steps below: 1. run perf report (TUI of course) with -v option 2. open map browser (by pressing right arrow key for any entry) 3. search any function (by pressing '/' key and input whatever..) 4. return to the hist browser (by pressing 'q' or left arrow key) 5. open annotation window for the same entry (by pressing 'a' key) Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421234288-22758-1-git-send-email-namhyung@kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vineet Gupta authored
[ Upstream commit ea1fe3a8 ] This is due to duplicated unistd inclusion (via uClibc headers + kernel headers) Also seen on ARM uClibc based tools ------- ARC build ---------->8------------- CC util/evlist.o In file included from ~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0, from util/../perf-sys.h:10, from util/../perf.h:15, from util/event.h:7, from util/event.c:3: ~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0: warning: "__NR_fcntl64" redefined [enabled by default] #define __NR_fcntl64 __NR3264_fcntl ^ In file included from ~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0, from util/../perf-sys.h:6, ----------------->8------------------- ------- ARM build ---------->8------------- CC FPIC plugin_scsi.o In file included from util/../perf-sys.h:9:0, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0: warning: "__NR_restart_syscall" redefined [enabled by default] In file included from ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0, from util/../perf-sys.h:6, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0: note: this is the location of the previous definition ----------------->8------------------- Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-4-git-send-email-vgupta@synopsys.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alexey Brodkin authored
[ Upstream commit db1806ed ] ARC Linux uses the no legacy syscalls abi and corresponding uClibc headers statfs defines f_type to be U32 which causes perf build breakage http://git.uclibc.org/uClibc/tree/libc/sysdeps/linux/common-generic/bits/statfs.h ----------->8--------------- CC fs/fs.o fs/fs.c: In function 'fs__valid_mount': fs/fs.c:82:24: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] else if (st_fs.f_type != magic) ^ cc1: all warnings being treated as errors ----------->8--------------- Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Cody P Schafer <dev@codyps.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: http://lkml.kernel.org/r/1420888254-17504-2-git-send-email-vgupta@synopsys.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Namhyung Kim authored
[ Upstream commit 260d819e ] When thread__init_map_groups() fails, a new thread should be removed from the rbtree since it's gonna be freed. Also update last match cache only if the function succeeded. Reported-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420763892-15535-1-git-send-email-namhyung@kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kan Liang authored
[ Upstream commit 33636732 ] cycles:p and cycles:pp do not work on SLM since commit: 86a04461 ("perf/x86: Revamp PEBS event selection") UOPS_RETIRED.ALL is not a PEBS capable event, so it should not be used to count cycle number. Actually SLM calls intel_pebs_aliases_core2() which uses INST_RETIRED.ANY_P to count the number of cycles. It's a PEBS capable event. But inv and cmask must be set to count cycles. Considering SLM allows all events as PEBS with no flags, only INST_RETIRED.ANY_P, inv=1, cmask=16 needs to handled specially. Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421084541-31639-1-git-send-email-kan.liang@intel.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Stephane Eranian authored
[ Upstream commit 433678bd ] This patch fixes a problem with the initialization of the sysfs_show() routine for the RAPL PMU. The current code was wrongly relying on the EVENT_ATTR_STR() macro which uses the events_sysfs_show() function in the x86 PMU code. That function itself was relying on the x86_pmu data structure. Yet RAPL and the core PMU (x86_pmu) have nothing to do with each other. They should therefore not interact with each other. The x86_pmu structure is initialized at boot time based on the host CPU model. When the host CPU is not supported, the x86_pmu remains uninitialized and some of the callbacks it contains are NULL. The false dependency with x86_pmu could potentially cause crashes in case the x86_pmu is not initialized while the RAPL PMU is. This may, for instance, be the case in virtualized environments. This patch fixes the problem by using a private sysfs_show() routine for exporting the RAPL PMU events. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150113225953.GA21525@thinkpad Cc: vincent.weaver@maine.edu Cc: jolsa@redhat.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Steven Rostedt (Red Hat) authored
[ Upstream commit ce1039bd ] Commit 5f893b26 "tracing: Move enabling tracepoints to just after rcu_init()" broke the enabling of system call events from the command line. The reason was that the enabling of command line trace events was moved before PID 1 started, and the syscall tracepoints require that all tasks have the TIF_SYSCALL_TRACEPOINT flag set. But the swapper task (pid 0) is not part of that. Since the swapper task is the only task that is running at this early in boot, no task gets the flag set, and the tracepoint never gets reached. Instead of setting the swapper task flag (there should be no reason to do that), re-enabled trace events again after the init thread (PID 1) has been started. It requires disabling all command line events and re-enabling them, as just enabling them again will not reset the logic to set the TIF_SYSCALL_TRACEPOINT flag, as the syscall tracepoint will be fooled into thinking that it was already set, and wont try setting it again. For this reason, we must first disable it and re-enable it. Link: http://lkml.kernel.org/r/1421188517-18312-1-git-send-email-mpe@ellerman.id.au Link: http://lkml.kernel.org/r/20150115040506.216066449@goodmis.org Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Colin Ian King authored
[ Upstream commit ef6899cd ] static code analysis from cppcheck reports: [drivers/video/fbdev/broadsheetfb.c:673]: (error) Memory leak: sector_buffer sector_buffer is not being kfree'd on each call to broadsheet_spiflash_rewrite_sector(), so free it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Wenyou Yang authored
[ Upstream commit b8659752 ] Appearance: On some SAMA5D4EK boards, after power up, the Eth1 doesn't work. Reason: The PIOE2 pin is connected to the NAND_Tree# of KSZ8081, But it outputs LOW during the reset period, which cause the NAND_Tree# enabled. Add phy_fixup() to disable NAND_Tree by overriding the Operation Mode Strap Override register(i.e. Register 16h) to clear the NAND_Tree bit. Signed-off-by:
Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alexander Stein authored
[ Upstream commit 55eb9c34 ] atmel_lcdfb needs also uses hclk clock, but AT91SAM9263 doesn't have that specific clock, so use lcd_clk twice. The same was done in arch/arm/mach-at91/at91sam9263.c Signed-off-by:
Alexander Stein <alexanders83@web.de> Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Bo Shen authored
[ Upstream commit 04582fd0 ] The MICBIAS is a supply, should route to MIC while not IN1L. Signed-off-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Bo Shen authored
[ Upstream commit 0068b2e1 ] The second property of reg is the length, so correct it for timer. Signed-off-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Johannes Thumshirn authored
[ Upstream commit 7b7c5491 ] Currently it is not possible to have a kernel with built-in MCB attached devices. This results out of the fact that mcb-pci requests PCI BAR 0, then parses the chameleon table and calls the driver's probe function before releasing BAR 0 again. When building the kernel with modules this is not a problem (and therefore it wasn't detected by my tests yet). A solution is to only remap the 1st 0x200 bytes of a Chameleon PCI device. 0x200 bytes is the maximum size of a Chameleon v2 Table. Also this patch stops disabling the PCI device on successful registration of MCB devices. Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@men.de> Suggested-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-