- 16 May, 2019 31 commits
-
-
Petr Štetiar authored
[ Upstream commit a1e8783d ] Currently it's not possible to use perf on ath79 due to genirq flags mismatch happening on static virtual IRQ 13 which is used for performance counters hardware IRQ 5. On TP-Link Archer C7v5: CPU0 2: 0 MIPS 2 ath9k 4: 318 MIPS 4 19000000.eth 7: 55034 MIPS 7 timer 8: 1236 MISC 3 ttyS0 12: 0 INTC 1 ehci_hcd:usb1 13: 0 gpio-ath79 2 keys 14: 0 gpio-ath79 5 keys 15: 31 AR724X PCI 1 ath10k_pci $ perf top genirq: Flags mismatch irq 13. 00014c83 (mips_perf_pmu) vs. 00002003 (keys) On TP-Link Archer C7v4: CPU0 4: 0 MIPS 4 19000000.eth 5: 7135 MIPS 5 1a000000.eth 7: 98379 MIPS 7 timer 8: 30 MISC 3 ttyS0 12: 90028 INTC 0 ath9k 13: 5520 INTC 1 ehci_hcd:usb1 14: 4623 INTC 2 ehci_hcd:usb2 15: 32844 AR724X PCI 1 ath10k_pci 16: 0 gpio-ath79 16 keys 23: 0 gpio-ath79 23 keys $ perf top genirq: Flags mismatch irq 13. 00014c80 (mips_perf_pmu) vs. 00000080 (ehci_hcd:usb1) This problem is happening, because currently statically assigned virtual IRQ 13 for performance counters is not claimed during the initialization of MIPS PMU during the bootup, so the IRQ subsystem doesn't know, that this interrupt isn't available for further use. So this patch fixes the issue by simply booking hardware IRQ 5 for MIPS PMU. Tested-by:
Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by:
Petr Štetiar <ynezz@true.cz> Acked-by:
John Crispin <john@phrozen.org> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Florian Westphal authored
[ Upstream commit 3c791076 ] else, we leak the addresses to userspace via ctnetlink events and dumps. Compute an ID on demand based on the immutable parts of nf_conn struct. Another advantage compared to using an address is that there is no immediate re-use of the same ID in case the conntrack entry is freed and reallocated again immediately. Fixes: 35832402 ("[NETFILTER]: nf_conntrack_expect: kill unique ID") Fixes: 7f85f914 ("[NETFILTER]: nf_conntrack: kill unique ID") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit 0261ea1b ] We can receive ICMP errors from client or from tunneling real server. While the former can be scheduled to real server, the latter should not be scheduled, they are decapsulated only when existing connection is found. Fixes: 6044eeff ("ipvs: attempt to schedule icmp packets") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit becf2319 ] When an icmp error such as pkttoobig is received, conntrack checks if the "inner" header (header of packet that did not fit link mtu) is matches an existing connection, and, if so, sets that packet as being related to the conntrack entry it found. It was recently reported that this "related" setting also works if the inner header is from another, different connection (i.e., artificial/forged icmp error). Add a test, followup patch will add additional "inner dst matches outer dst in reverse direction" check before setting related state. Link: https://www.synacktiv.com/posts/systems/icmp-reachable.html Signed-off-by:
-
Dan Williams authored
[ Upstream commit 6041186a ] When a module option, or core kernel argument, toggles a static-key it requires jump labels to be initialized early. While x86, PowerPC, and ARM64 arrange for jump_label_init() to be called before parse_args(), ARM does not. Kernel command line: rdinit=/sbin/init page_alloc.shuffle=1 panic=-1 console=ttyAMA0,115200 page_alloc.shuffle=1 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ./include/linux/jump_label.h:303 page_alloc_shuffle+0x12c/0x1ac static_key_enable(): static key 'page_alloc_shuffle_key+0x0/0x4' used before call to jump_label_init() Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc4-next-20190410-00003-g3367c36ce744 #1 Hardware name: ARM Integrator/CP (Device Tree) [<c0011c68>] (unwind_backtrace) from [<c000ec48>] (show_stack+0x10/0x18) [<c000ec48>] (show_stack) from [<c07e9710>] (dump_stack+0x18/0x24) [<c07e9710>] (dump_stack) from [<c001bb1c>] (__warn+0xe0/0x108) [<c001bb1c>] (__warn) from [<c001bb88>] (warn_slowpath_fmt+0x44/0x6c) [<c001bb88>] (warn_slowpath_fmt) from [<c0b0c4a8>] (page_alloc_shuffle+0x12c/0x1ac) [<c0b0c4a8>] (page_alloc_shuffle) from [<c0b0c550>] (shuffle_store+0x28/0x48) [<c0b0c550>] (shuffle_store) from [<c003e6a0>] (parse_args+0x1f4/0x350) [<c003e6a0>] (parse_args) from [<c0ac3c00>] (start_kernel+0x1c0/0x488) Move the fallback call to jump_label_init() to occur before parse_args(). The redundant calls to jump_label_init() in other archs are left intact in case they have static key toggling use cases that are even earlier than option parsing. Link: http://lkml.kernel.org/r/155544804466.1032396.13418949511615676665.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reported-by:
Guenter Roeck <groeck@google.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Russell King <rmk@armlinux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Johannes Weiner authored
[ Upstream commit 3b991208 ] During !CONFIG_CGROUP reclaim, we expand the inactive list size if it's thrashing on the node that is about to be reclaimed. But when cgroups are enabled, we suddenly ignore the node scope and use the cgroup scope only. The result is that pressure bleeds between NUMA nodes depending on whether cgroups are merely compiled into Linux. This behavioral difference is unexpected and undesirable. When the refault adaptivity of the inactive list was first introduced, there were no statistics at the lruvec level - the intersection of node and memcg - so it was better than nothing. But now that we have that infrastructure, use lruvec_page_state() to make the list balancing decision always NUMA aware. [hannes@cmpxchg.org: fix bisection hole] Link: http://lkml.kernel.org/r/20190417155241.GB23013@cmpxchg.org Link: http://lkml.kernel.org/r/20190412144438.2645-1-hannes@cmpxchg.org Fixes: 2a2e4885 ("mm: vmscan: fix IO/refault regression in cache workingset transition") Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Cc: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
-
Rikard Falkeborn authored
[ Upstream commit f32c2877 ] There was a missing comparison with 0 when checking if type is "s64" or "u64". Therefore, the body of the if-statement was entered if "type" was "u64" or not "s64", which made the first strcmp() redundant since if type is "u64", it's not "s64". If type is "s64", the body of the if-statement is not entered but since the remainder of the function consists of if-statements which will not be entered if type is "s64", we will just return "val", which is correct, albeit at the cost of a few more calls to strcmp(), i.e., it will behave just as if the if-statement was entered. If type is neither "s64" or "u64", the body of the if-statement will be entered incorrectly and "val" returned. This means that any type that is checked after "s64" and "u64" is handled the same way as "s64" and "u64", i.e., the limiting of "val" to fit in for example "s8" is never reached. This was introduced in the kernel tree when the sources were copied from trace-cmd in commit f7d82350 ("tools/events: Add files to create libtraceevent.a"), and in the trace-cmd repo in 1cdbae6035cei ("Implement typecasting in parser") when the function was introduced, i.e., it has always behaved the wrong way. Detected by cppcheck. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Fixes: f7d82350 ("tools/events: Add files to create libtraceevent.a") Link: http://lkml.kernel.org/r/20190409091529.2686-1-rikard.falkeborn@gmail.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit 7a223e06 ] In __apic_accept_irq() interface trig_mode is int and actually on some code paths it is set above u8: kvm_apic_set_irq() extracts it from 'struct kvm_lapic_irq' where trig_mode is u16. This is done on purpose as e.g. kvm_set_msi_irq() sets it to (1 << 15) & e->msi.data kvm_apic_local_deliver sets it to reg & (1 << 15). Fix the immediate issue by making 'tm' into u16. We may also want to adjust __apic_accept_irq() interface and use proper sizes for vector, level, trig_mode but this is not urgent. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
[ Upstream commit 1d487e9b ] These were found with smatch, and then generalized when applicable. Signed-off-by:
-
Jian-Hong Pan authored
[ Upstream commit 0082517f ] Upon reboot, the Acer TravelMate X514-51T laptop appears to complete the shutdown process, but then it hangs in BIOS POST with a black screen. The problem is intermittent - at some points it has appeared related to Secure Boot settings or different kernel builds, but ultimately we have not been able to identify the exact conditions that trigger the issue to come and go. Besides, the EFI mode cannot be disabled in the BIOS of this model. However, after extensive testing, we observe that using the EFI reboot method reliably avoids the issue in all cases. So add a boot time quirk to use EFI reboot on such systems. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=203119 Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
Daniel Drake <drake@endlessm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Cc: linux@endlessm.com Link: http://lkml.kernel.org/r/20190412080152.3718-1-jian-hong@endlessm.com [ Fix !CONFIG_EFI build failure, clarify the code and the changelog a bit. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Harald Freudenberger authored
[ Upstream commit 6b1f16ba ] The debug feature entries have been used with up to 5 arguents (including the pointer to the format string) but there was only space reserved for 4 arguemnts. So now the registration does reserve space for 5 times a long value. This fixes a sometime appearing weired value as the last value of an debug feature entry like this: ... pkey_sec2protkey zcrypt_send_cprb (cardnr=10 domain=12) failed with errno -2143346254 Signed-off-by:
Harald Freudenberger <freude@linux.ibm.com> Reported-by:
Christian Rund <Christian.Rund@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Tetsuo Handa authored
[ Upstream commit 238ffdc4 ] KMSAN will complain if valid address length passed to bind() is shorter than sizeof("struct sockaddr_mISDN"->family) bytes. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Neil Armstrong authored
[ Upstream commit fbc87aa0 ] The OX820 compatible is wrong is the driver, fix it. Fixes: 2ea3401e ("clocksource/drivers/oxnas: Add OX820 compatible") Reported-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 5712f330 ] The spinlock in the raw3270_view structure is used by con3270, tty3270 and fs3270 in different ways. For con3270 the lock can be acquired in irq context, for tty3270 and fs3270 the highest context is bh. Lockdep sees the view->lock as a single class and if the 3270 driver is used for the console the following message is generated: WARNING: inconsistent lock state 5.1.0-rc3-05157-g5c168033979d #12 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. swapper/0/1 [HC0[0]:SC1[1]:HE1:SE0] takes: (____ptrval____) (&(&view->lock)->rlock){?.-.}, at: tty3270_update+0x7c/0x330 Introduce a lockdep subclass for the view lock to distinguish bh from irq locks. Signed-off-by:
-
Sunil Dutt authored
[ Upstream commit d6db02a8 ] This commit adds NL80211_FLAG_CLEAR_SKB flag to other NL commands that carry key data to ensure they do not stick around on heap after the SKB is freed. Also introduced this flag for NL80211_CMD_VENDOR as there are sub commands which configure the keys. Signed-off-by:
Sunil Dutt <usdutt@codeaurora.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit eb9b64e3 ] skb->truesize can change due to memory reallocation or when adding extra fragments. Adjust fq->memory_usage accordingly Signed-off-by:
Felix Fietkau <nbd@nbd.name> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Andrei Otcheretianski authored
[ Upstream commit 78be2d21 ] Looks that 100 chars isn't enough for messages, as we keep getting warnings popping from different places due to message shortening. Instead of trying to shorten the prints, just increase the buffer size. Signed-off-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 40586e3f ] The pointer to the last four bytes of the address is not guaranteed to be aligned, so we need to use __get_unaligned_cpu32 here Signed-off-by:
-
Peter Oberparleiter authored
[ Upstream commit 2cc9637c ] The DASD driver incorrectly limits the maximum number of blocks of ECKD DASD volumes to 32 bit numbers. Volumes with a capacity greater than 2^32-1 blocks are incorrectly recognized as smaller volumes. This results in the following volume capacity limits depending on the formatted block size: BLKSIZE MAX_GB MAX_CYL 512 2047 5843492c 1024 4095 8676701 2048 8191 13634816 4096 16383 23860929 The same problem occurs when a volume with more than 17895697 cylinders is accessed in raw-track-access mode. Fix this problem by adding an explicit type cast when calculating the maximum number of blocks. Signed-off-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by:
Stefan Haberland <sth@linux.ibm.com> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 486fa92d ] In case kmemdup fails, the fix releases resources and returns to avoid the NULL pointer dereference. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit c01908a1 ] According to HUT 1.12 usage 0xb5 from the generic desktop page is reserved for switching between external and internal display, so let's add the mapping. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit 7975a1d6 ] According to HUTRR73 usages 0x79, 0x7a and 0x7c from the consumer page correspond to Brightness Up/Down/Toggle keys, so let's add the mappings. Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit 96dd8687 ] According to HUTRR77 usage 0x29f from the consumer page is reserved for the Desktop application to present all running user’s application windows. Linux defines KEY_SCALE to request Compiz Scale (Expose) mode, so let's add the mapping. Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 55c1fc0a ] In case kmemdup fails, the fix goes to blk_err to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Sven Van Asbroeck authored
[ Upstream commit 62039b6a ] When cancel_delayed_work() returns, the delayed work may still be running. This means that the core could potentially free the private structure (struct xadc) while the delayed work is still using it. This is a potential use-after-free. Fix by calling cancel_delayed_work_sync(), which waits for any residual work to finish before returning. Signed-off-by:
Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Johan Hovold authored
commit 3f5edd58 upstream. Fix two long-standing bugs which could potentially lead to memory corruption or leave the port throttled until it is reopened (on weakly ordered systems), respectively, when read-URB completion races with unthrottle(). First, the URB must not be marked as free before processing is complete to prevent it from being submitted by unthrottle() on another CPU. CPU 1 CPU 2 ================ ================ complete() unthrottle() process_urb(); smp_mb__before_atomic(); set_bit(i, free); if (test_and_clear_bit(i, free)) submit_urb(); Second, the URB must be marked as free before checking the throttled flag to prevent unthrottle() on another CPU from failing to observe that the URB needs to be submitted if complete() sees that the throttled flag is set. CPU 1 CPU 2 ================ ================ complete() unthrottle() set_bit(i, free); throttled = 0; smp_mb__after_atomic(); smp_mb(); if (throttled) if (test_and_clear_bit(i, free)) return; submit_urb(); Note that test_and_clear_bit() only implies barriers when the test is successful. To handle the case where the URB is still in use an explicit barrier needs to be added to unthrottle() for the second race condition. Fixes: d83b4053 ("USB: serial: add support for multiple read urbs") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrea Parri authored
commit 99826790 upstream. smp_mb__before_atomic() can not be applied to atomic_set(). Remove the barrier and rely on RELEASE synchronization. Fixes: ba16b284 ("kernfs: add an API to get kernfs node from inode number") Cc: stable@vger.kernel.org Signed-off-by:
Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Stefan Wahren authored
commit 53f1647d upstream. In case pwm_fan_of_get_cooling_data() fails we should disable the PWM just like in the other error cases. Fixes: 2e5219c7 ("hwmon: (pwm-fan) Read PWM FAN configuration from device tree") Cc: <stable@vger.kernel.org> # 4.14+ Reported-by:
Guenter Rock <linux@roeck-us.net> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Jiaxun Yang authored
commit f7db839f upstream. Some AMD based ThinkPads have a firmware bug that calling "GBDC" will cause Bluetooth on Intel wireless cards blocked. Probe these models by DMI match and disable Bluetooth subdriver if specified Intel wireless card exist. Cc: stable <stable@vger.kernel.org> # 4.14+ Signed-off-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 1cbd7a64 upstream. It seems that the default case should return AE_CTRL_TERMINATE, instead of falling through to case ACPI_RESOURCE_TYPE_END_TAG and returning AE_OK; otherwise the line of code at the end of the function is unreachable and makes no sense: return AE_CTRL_TERMINATE; This fix is based on the following thread of discussion: https://lore.kernel.org/patchwork/patch/959782/ Fixes: 33a04454 ("sony-laptop: Add SNY6001 device handling (sonypi reimplementation)") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
-
Francesco Ruggeri authored
commit 8d29d16d upstream If a non zero value happens to be in xt[NFPROTO_BRIDGE].cur at init time, the following panic can be caused by running % ebtables -t broute -F BROUTING from a 32-bit user level on a 64-bit kernel. This patch replaces kmalloc_array with kcalloc when allocating xt. [ 474.680846] BUG: unable to handle kernel paging request at 0000000009600920 [ 474.687869] PGD 2037006067 P4D 2037006067 PUD 2038938067 PMD 0 [ 474.693838] Oops: 0000 [#1] SMP [ 474.697055] CPU: 9 PID: 4662 Comm: ebtables Kdump: loaded Not tainted 4.19.17-11302235.AroraKernelnext.fc18.x86_64 #1 [ 474.707721] Hardware name: Supermicro X9DRT/X9DRT, BIOS 3.0 06/28/2013 [ 474.714313] RIP: 0010:xt_compat_calc_jump+0x2f/0x63 [x_tables] [ 474.720201] Code: 40 0f b6 ff 55 31 c0 48 6b ff 70 48 03 3d dc 45 00 00 48 89 e5 8b 4f 6c 4c 8b 47 60 ff c9 39 c8 7f 2f 8d 14 08 d1 fa 48 63 fa <41> 39 34 f8 4c 8d 0c fd 00 00 00 00 73 05 8d 42 01 eb e1 76 05 8d [ 474.739023] RSP: 0018:ffffc9000943fc58 EFLAGS: 00010207 [ 474.744296] RAX: 0000000000000000 RBX: ffffc90006465000 RCX: 0000000002580249 [ 474.751485] RDX: 00000000012c0124 RSI: fffffffff7be17e9 RDI: 00000000012c0124 [ 474.758670] RBP: ffffc9000943fc58 R08: 0000000000000000 R09: ffffffff8117cf8f [ 474.765855] R10: ffffc90006477000 R11: 0000000000000000 R12: 0000000000000001 [ 474.773048] R13: 0000000000000000 R14: ffffc9000943fcb8 R15: ffffc9000943fcb8 [ 474.780234] FS: 0000000000000000(0000) GS:ffff88a03f840000(0063) knlGS:00000000f7ac7700 [ 474.788612] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 474.794632] CR2: 0000000009600920 CR3: 0000002037422006 CR4: 00000000000606e0 [ 474.802052] Call Trace: [ 474.804789] compat_do_replace+0x1fb/0x2a3 [ebtables] [ 474.810105] compat_do_ebt_set_ctl+0x69/0xe6 [ebtables] [ 474.815605] ? try_module_get+0x37/0x42 [ 474.819716] compat_nf_setsockopt+0x4f/0x6d [ 474.824172] compat_ip_setsockopt+0x7e/0x8c [ 474.828641] compat_raw_setsockopt+0x16/0x3a [ 474.833220] compat_sock_common_setsockopt+0x1d/0x24 [ 474.838458] __compat_sys_setsockopt+0x17e/0x1b1 [ 474.843343] ? __check_object_size+0x76/0x19a [ 474.847960] __ia32_compat_sys_socketcall+0x1cb/0x25b [ 474.853276] do_fast_syscall_32+0xaf/0xf6 [ 474.857548] entry_SYSENTER_compat+0x6b/0x7a Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Acked-by:
Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
- 14 May, 2019 9 commits
-
-
Greg Kroah-Hartman authored
-
Josh Poimboeuf authored
commit 95310e34 upstream Fix a minor typo in the MDS documentation: "eanbled" -> "enabled". Reported-by:
Jeff Bastian <jbastian@redhat.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Tyler Hicks authored
commit ea01668f upstream Adjust the last two rows in the table that display possible values when MDS mitigation is enabled. They both were slightly innacurate. In addition, convert the table of possible values and their descriptions to a list-table. The simple table format uses the top border of equals signs to determine cell width which resulted in the first column being far too wide in comparison to the second column that contained the majority of the text. Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
speck for Pawan Gupta authored
commit e672f8bf upstream Updated the documentation for a new CVE-2019-11091 Microarchitectural Data Sampling Uncacheable Memory (MDSUM) which is a variant of Microarchitectural Data Sampling (MDS). MDS is a family of side channel attacks on internal buffers in Intel CPUs. MDSUM is a special case of MSBDS, MFBDS and MLPDS. An uncacheable load from memory that takes a fault or assist can leave data in a microarchitectural structure that may later be observed using one of the same methods used by MSBDS, MFBDS or MLPDS. There are no new code changes expected for MDSUM. The existing mitigation for MDS applies to MDSUM as well. Signed-off-by:
Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by:
Jon Masters <jcm@redhat.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 5c14068f upstream Add MDS to the new 'mitigations=' cmdline option. Signed-off-by:
-
Josh Poimboeuf authored
commit 0336e04a upstream Configure s390 runtime CPU speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Spectre v1 and Spectre v2. The default behavior is unchanged. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/e4a161805458a5ec88812aac0307ae3908a030fc.1555085500.git.jpoimboe@redhat.com Signed-off-by:
-
Josh Poimboeuf authored
commit 782e69ef upstream Configure powerpc CPU runtime speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Meltdown, Spectre v1, Spectre v2, and Speculative Store Bypass. The default behavior is unchanged. Signed-off-by:
-
Josh Poimboeuf authored
commit d68be4c4 upstream Configure x86 runtime CPU speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Meltdown, Spectre v2, Speculative Store Bypass, and L1TF. The default behavior is unchanged. Signed-off-by:
-
Josh Poimboeuf authored
commit 98af8452 upstream Keeping track of the number of mitigations for all the CPU speculation bugs has become overwhelming for many users. It's getting more and more complicated to decide which mitigations are needed for a given architecture. Complicating matters is the fact that each arch tends to have its own custom way to mitigate the same vulnerability. Most users fall into a few basic categories: a) they want all mitigations off; b) they want all reasonable mitigations on, with SMT enabled even if it's vulnerable; or c) they want all reasonable mitigations on, with SMT disabled if vulnerable. Define a set of curated, arch-independent options, each of which is an aggregation of existing options: - mitigations=off: Disable all mitigations. - mitigations=auto: [default] Enable all the default mitigations, but leave SMT enabled, even if it's vulnerable. - mitigations=auto,nosmt: Enable all the default mitigations, disabling SMT if needed by a mitigation. Currently, these options are placeholders which don't actually do anything. They will be fleshed out in upcoming patches. Signed-off-by:
-
