- 12 Oct, 2017 28 commits
-
-
Josef Bacik authored
commit 3da40c7b upstream. At LSF we decided that if we truncate up from isize we shouldn't trim fallocated blocks that were fallocated with KEEP_SIZE and are past the new i_size. This patch fixes ext4 to do this. [ Completely reworked patch so that i_disksize would actually get set when truncating up. Also reworked the code for handling truncate so that it's easier to handle. -- tytso ] Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jani Nikula authored
commit 2ba7d7e0 upstream. The hardware state readout oopses after several warnings when trying to use HDMI on port A, if such a combination is configured in VBT. Filter the combo out already at the VBT parsing phase. v2: also ignore DVI (Ville) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102889 Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
Daniel Drake <dan@reactivated.net> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170921141920.18172-1-jani.nikula@intel.com (cherry picked from commit d27ffc1d ) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Salido authored
commit 8320caee upstream. The buffer allocation is not currently accounting for an extra byte for the report id. This can cause an out of bounds access in function i2c_hid_set_or_send_report() with reportID > 15. Signed-off-by:
Adrian Salido <salidoa@google.com> Reviewed-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolai Stange authored
commit bf563b01 upstream. When printing the driver_override parameter when it is 4095 and 4094 bytes long, the printing code would access invalid memory because we need count+1 bytes for printing. Reject driver_override values of these lengths in driver_override_store(). This is in close analogy to commit 4efe874a ("PCI: Don't read past the end of sysfs "driver_override" buffer") from Sasha Levin. Fixes: 3d713e0e ("driver core: platform: add device binding path 'driver_override'") Signed-off-by:
Nicolai Stange <nstange@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 7682e399 upstream. The usx2y driver allocates the stream read/write buffers in continuous pages depending on the stream setup, and this may spew the kernel warning messages with a stack trace like: WARNING: CPU: 1 PID: 1846 at mm/page_alloc.c:3883 __alloc_pages_slowpath+0x1ef2/0x2d70 Modules linked in: CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted .... It may confuse user as if it were any serious error, although this is no fatal error and the driver handles the error case gracefully. Since the driver has already some sanity check of the given size (128 and 256 pages), it can't pass any crazy value. So it's merely page fragmentation. This patch adds __GFP_NOWARN to each caller for suppressing such kernel warnings. The original issue was spotted by syzkaller. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Casey Schaufler authored
commit 57e7ba04 upstream. security_inode_getsecurity() provides the text string value of a security attribute. It does not provide a "secctx". The code in xattr_getsecurity() that calls security_inode_getsecurity() and then calls security_release_secctx() happened to work because SElinux and Smack treat the attribute and the secctx the same way. It fails for cap_inode_getsecurity(), because that module has no secctx that ever needs releasing. It turns out that Smack is the one that's doing things wrong by not allocating memory when instructed to do so by the "alloc" parameter. The fix is simple enough. Change the security_release_secctx() to kfree() because it isn't a secctx being returned by security_inode_getsecurity(). Change Smack to allocate the string when told to do so. Note: this also fixes memory leaks for LSMs which implement inode_getsecurity but not release_secctx, such as capabilities. Signed-off-by:
Casey Schaufler <casey@schaufler-ca.com> Reported-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrey Konovalov authored
commit 70e743e4 upstream. hwarc_neep_init() assumes that endpoint 0 is interrupt, but there's no check for that, which results in a WARNING in USB core code, when a bad USB descriptor is provided from a device: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 3 at drivers/usb/core/urb.c:449 usb_submit_urb+0xf8a/0x11d0 Modules linked in: CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.13.0+ #111 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bdc1a00 task.stack: ffff88006bde8000 RIP: 0010:usb_submit_urb+0xf8a/0x11d0 drivers/usb/core/urb.c:448 RSP: 0018:ffff88006bdee3c0 EFLAGS: 00010282 RAX: 0000000000000029 RBX: ffff8800672a7200 RCX: 0000000000000000 RDX: 0000000000000029 RSI: ffff88006c815c78 RDI: ffffed000d7bdc6a RBP: ffff88006bdee4c0 R08: fffffbfff0fe00ff R09: fffffbfff0fe00ff R10: 0000000000000018 R11: fffffbfff0fe00fe R12: 1ffff1000d7bdc7f R13: 0000000000000003 R14: 0000000000000001 R15: ffff88006b02cc90 FS: 0000000000000000(0000) GS:ffff88006c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe4daddf000 CR3: 000000006add6000 CR4: 00000000000006f0 Call Trace: hwarc_neep_init+0x4ce/0x9c0 drivers/uwb/hwa-rc.c:710 uwb_rc_add+0x2fb/0x730 drivers/uwb/lc-rc.c:361 hwarc_probe+0x34e/0x9b0 drivers/uwb/hwa-rc.c:858 usb_probe_interface+0x351/0x8d0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:385 driver_probe_device+0x610/0xa00 drivers/base/dd.c:529 __device_attach_driver+0x230/0x290 drivers/base/dd.c:625 bus_for_each_drv+0x15e/0x210 drivers/base/bus.c:463 __device_attach+0x269/0x3c0 drivers/base/dd.c:682 device_initial_probe+0x1f/0x30 drivers/base/dd.c:729 bus_probe_device+0x1da/0x280 drivers/base/bus.c:523 device_add+0xcf9/0x1640 drivers/base/core.c:1703 usb_set_configuration+0x1064/0x1890 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:385 driver_probe_device+0x610/0xa00 drivers/base/dd.c:529 __device_attach_driver+0x230/0x290 drivers/base/dd.c:625 bus_for_each_drv+0x15e/0x210 drivers/base/bus.c:463 __device_attach+0x269/0x3c0 drivers/base/dd.c:682 device_initial_probe+0x1f/0x30 drivers/base/dd.c:729 bus_probe_device+0x1da/0x280 drivers/base/bus.c:523 device_add+0xcf9/0x1640 drivers/base/core.c:1703 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4890 hub_port_connect_change drivers/usb/core/hub.c:4996 port_event drivers/usb/core/hub.c:5102 hub_event+0x23c8/0x37c0 drivers/usb/core/hub.c:5182 process_one_work+0x9fb/0x1570 kernel/workqueue.c:2097 worker_thread+0x1e4/0x1350 kernel/workqueue.c:2231 kthread+0x324/0x3f0 kernel/kthread.c:231 ret_from_fork+0x25/0x30 arch/x86/entry/entry_64.S:425 Code: 48 8b 85 30 ff ff ff 48 8d b8 98 00 00 00 e8 8e 93 07 ff 45 89 e8 44 89 f1 4c 89 fa 48 89 c6 48 c7 c7 a0 e5 55 86 e8 20 08 8f fd <0f> ff e9 9b f7 ff ff e8 4a 04 d6 fd e9 80 f7 ff ff e8 60 11 a6 ---[ end trace 55d741234124cfc3 ]--- Check that endpoint is interrupt. Found by syzkaller. Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrey Konovalov authored
commit bbf26183 upstream. uwbd_start() calls kthread_run() and checks that the return value is not NULL. But the return value is not NULL in case kthread_run() fails, it takes the form of ERR_PTR(-EINTR). Use IS_ERR() instead. Also add a check to uwbd_stop(). Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lukas Wunner authored
commit 0964e409 upstream. The driver calls spi_get_drvdata() in its ->remove hook even though it has never called spi_set_drvdata(). Stack trace for posterity: Unable to handle kernel NULL pointer dereference at virtual address 00000220 Internal error: Oops: 5 [#1] SMP ARM [<8072f564>] (mutex_lock) from [<7f1400d0>] (iio_device_unregister+0x24/0x7c [industrialio]) [<7f1400d0>] (iio_device_unregister [industrialio]) from [<7f15e020>] (mcp320x_remove+0x20/0x30 [mcp320x]) [<7f15e020>] (mcp320x_remove [mcp320x]) from [<8055a8cc>] (spi_drv_remove+0x2c/0x44) [<8055a8cc>] (spi_drv_remove) from [<805087bc>] (__device_release_driver+0x98/0x134) [<805087bc>] (__device_release_driver) from [<80509180>] (driver_detach+0xdc/0xe0) [<80509180>] (driver_detach) from [<8050823c>] (bus_remove_driver+0x5c/0xb0) [<8050823c>] (bus_remove_driver) from [<80509ab0>] (driver_unregister+0x38/0x58) [<80509ab0>] (driver_unregister) from [<7f15e69c>] (mcp320x_driver_exit+0x14/0x1c [mcp320x]) [<7f15e69c>] (mcp320x_driver_exit [mcp320x]) from [<801a78d0>] (SyS_delete_module+0x184/0x1d0) [<801a78d0>] (SyS_delete_module) from [<80108100>] (ret_fast_syscall+0x0/0x1c) Fixes: f5ce4a7a ("iio: adc: add driver for MCP3204/08 12-bit ADC") Cc: Oskar Andero <oskar.andero@gmail.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dragos Bogdan authored
commit 7ee3b7eb upstream. The serial interface can be reset by writing 32 consecutive 1s to the device. 'ret' was initialized correctly but its value was overwritten when ad7793_check_platform_data() was called. Since a dedicated reset function is present now, it should be used instead. Fixes: 2edb769d ("iio:ad7793: Add support for the ad7798 and ad7799") Signed-off-by:
Dragos Bogdan <dragos.bogdan@analog.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matt Fornero authored
commit 3d62c78a upstream. If an IIO device returns an error code for a read access via debugfs, it is currently ignored by the IIO core (other than emitting an error message). Instead, return this error code to user space, so upper layers can detect it correctly. Signed-off-by:
Matt Fornero <matt.fornero@mathworks.com> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Popa authored
commit f790923f upstream. Depends on: 691c4b95d1 ("iio: ad_sigma_delta: Implement a dedicated reset function") SPI host drivers can use DMA to transfer data, so the buffer should be properly allocated. Keeping it on the stack could cause an undefined behavior. The dedicated reset function solves this issue. Signed-off-by:
Stefan Popa <stefan.popa@analog.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dragos Bogdan authored
commit 7fc10de8 upstream. Since most of the SD ADCs have the option of reseting the serial interface by sending a number of SCLKs with CS = 0 and DIN = 1, a dedicated function that can do this is usefull. Needed for the patch: iio: ad7793: Fix the serial interface reset Signed-off-by:
Dragos Bogdan <dragos.bogdan@analog.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 5a838a13 upstream. xhci driver keeps a bus_state structure for each hcd (usb2 and usb3) The structure is picked based on hcd speed, but driver only compared for HCD_USB3 speed, returning the wrong bus_state for HCD_USB31 hosts. This caused null pointer dereference errors in bus_resume function. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit bd7a3fe7 upstream. Andrey Konovalov reported a possible out-of-bounds problem for a USB interface association descriptor. He writes: It seems there's no proper size check of a USB_DT_INTERFACE_ASSOCIATION descriptor. It's only checked that the size is >= 2 in usb_parse_configuration(), so find_iad() might do out-of-bounds access to intf_assoc->bInterfaceCount. And he's right, we don't check for crazy descriptors of this type very well, so resolve this problem. Yet another issue found by syzkaller... Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Fleytman authored
commit b2a542bb upstream. Commit e0429362 ("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e") introduced quirk to workaround an issue with some Logitech webcams. The workaround is introducing delay for some USB operations. According to our testing, delay introduced by original commit is not long enough and in rare cases we still see issues described by the aforementioned commit. This patch increases delays introduced by original commit. Having this patch applied we do not see those problems anymore. Signed-off-by:
Dmitry Fleytman <dmitry@daynix.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 786de92b upstream. The uas driver has a subtle bug in the way it handles alternate settings. The uas_find_uas_alt_setting() routine returns an altsetting value (the bAlternateSetting number in the descriptor), but uas_use_uas_driver() then treats that value as an index to the intf->altsetting array, which it isn't. Normally this doesn't cause any problems because the various alternate settings have bAlternateSetting values 0, 1, 2, ..., so the value is equal to the index in the array. But this is not guaranteed, and Andrey Konovalov used the syzkaller fuzzer with KASAN to get a slab-out-of-bounds error by violating this assumption. This patch fixes the bug by making uas_find_uas_alt_setting() return a pointer to the altsetting entry rather than either the value or the index. Pointers are less subject to misinterpretation. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Andrey Konovalov <andreyknvl@google.com> CC: Oliver Neukum <oneukum@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit fa1ed74e upstream. The user buffer has "uurb->buffer_length" bytes. If the kernel has more information than that, we should truncate it instead of writing past the end of the user's buffer. I added a WARN_ONCE() to help the user debug the issue. Reported-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 0173a68b upstream. The dummy-hcd HCD/UDC emulator tries not to do too much work during each timer interrupt. But it doesn't try very hard; currently all it does is limit the total amount of bulk data transferred. Other transfer types aren't limited, and URBs that transfer no data (because of an error, perhaps) don't count toward the limit, even though on a real USB bus they would consume at least a minimum overhead. This means it's possible to get the driver stuck in an infinite loop, for example, if the host class driver resubmits an URB every time it completes (which is common for interrupt URBs). Each time the URB is resubmitted it gets added to the end of the pending-URBs list, and dummy-hcd doesn't stop until that list is empty. Andrey Konovalov was able to trigger this failure mode using the syzkaller fuzzer. This patch fixes the infinite-loop problem by restricting the URBs handled during each timer interrupt to those that were already on the pending list when the interrupt routine started. Newly added URBs won't be processed until the next timer interrupt. The problem of properly accounting for non-bulk bandwidth (as well as packet and transaction overhead) is not addressed here. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit fe659bcc upstream. The dummy-hcd UDC driver is not careful about the way it handles connection speeds. It ignores the module parameter that is supposed to govern the maximum connection speed and it doesn't set the HCD flags properly for the case where it ends up running at full speed. The result is that in many cases, gadget enumeration over dummy-hcd fails because the bMaxPacketSize byte in the device descriptor is set incorrectly. For example, the default settings call for a high-speed connection, but the maxpacket value for ep0 ends up being set for a Super-Speed connection. This patch fixes the problem by initializing the gadget's max_speed and the HCD flags correctly. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jim Dickerson authored
commit 114ec3a6 upstream. Servers were emitting failed handoff messages but were not waiting the full 1 second as designated in section 4.22.1 of the eXtensible Host Controller Interface specifications. The handshake was using wrong units so calls were made with milliseconds not microseconds. Comments referenced 5 seconds not 1 second as in specs. The wrong units were also corrected in a second handshake call. Signed-off-by:
Jim Dickerson <jim.dickerson@hpe.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit bfc81a8b upstream. When a USB-audio device receives a maliciously adjusted or corrupted buffer descriptor, the USB-audio driver may access an out-of-bounce value at its parser. This was detected by syzkaller, something like: BUG: KASAN: slab-out-of-bounds in usb_audio_probe+0x27b2/0x2ab0 Read of size 1 at addr ffff88006b83a9e8 by task kworker/0:1/24 CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc1-42251-gebb2c243 #224 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 snd_usb_create_streams sound/usb/card.c:248 usb_audio_probe+0x27b2/0x2ab0 sound/usb/card.c:605 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 This patch adds the checks of out-of-bounce accesses at appropriate places and bails out when it goes out of the given buffer. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yoshihiro Shimoda authored
commit 0a2ce62b upstream. This patch fixes an issue that the usbhsf_fifo_clear() is possible to cause 10 msec delay if the pipe is RX direction and empty because the FRDY bit will never be set to 1 in such case. Fixes: e8d548d5 ("usb: renesas_usbhs: fifo became independent from pipe.") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yoshihiro Shimoda authored
commit 6124607a upstream. This patch fixes an issue that the driver sets the BCLR bit of {C,Dn}FIFOCTR register to 1 even when it's non-DCP pipe and the FRDY bit of {C,Dn}FIFOCTR register is set to 1. Fixes: e8d548d5 ("usb: renesas_usbhs: fifo became independent from pipe.") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 113f6eb6 upstream. Kris Lindgren reports that without the NO_WP_DETECT flag, his Seagate external disk drive fails all write accesses. This regresssion dates back approximately to the start of the 4.x kernel releases. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Kris Lindgren <kris.lindgren@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 6e76c01e upstream. The gadgetfs driver as a long-outstanding FIXME, regarding a call of copy_to_user() made while holding a spinlock. This patch fixes the issue by dropping the spinlock and using the dev->udc_usage mechanism introduced by another recent patch to guard against status changes while the lock isn't held. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 520b72fc upstream. The gadgetfs driver (drivers/usb/gadget/legacy/inode.c) was written before the UDC and composite frameworks were adopted; it is a legacy driver. As such, it expects that once bound to a UDC controller, it will not be unbound until it unregisters itself. However, the UDC framework does unbind function drivers while they are still registered. When this happens, it can cause the gadgetfs driver to misbehave or crash. For example, userspace can cause a crash by opening the device file and doing an ioctl call before setting up a configuration (found by Andrey Konovalov using the syzkaller fuzzer). This patch adds checks and synchronization to prevent these bad behaviors. It adds a udc_usage counter that the driver increments at times when it is using a gadget interface without holding the private spinlock. The unbind routine waits for this counter to go to 0 before returning, thereby ensuring that the UDC is no longer in use. The patch also adds a check in the dev_ioctl() routine to make sure the driver is bound to a UDC before dereferencing the gadget pointer, and it makes destroy_ep_files() synchronize with the endpoint I/O routines, to prevent the user from accessing an endpoint data structure after it has been removed. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Eccher authored
commit b7bd98b7 upstream. Fix bad unlock balance: ep0_write enter with the locks locked from inode.c:1769, hence it must exit with spinlock held to avoid double unlock in dev_config. Signed-off-by:
David Eccher <d.eccher@gmail.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 Oct, 2017 12 commits
-
-
Greg Kroah-Hartman authored
-
Andrey Ryabinin authored
commit f5527fff upstream. This fixes CVE-2016-8650. If mpi_powm() is given a zero exponent, it wants to immediately return either 1 or 0, depending on the modulus. However, if the result was initalised with zero limb space, no limbs space is allocated and a NULL-pointer exception ensues. Fix this by allocating a minimal amount of limb space for the result when the 0-exponent case when the result is 1 and not touching the limb space when the result is 0. This affects the use of RSA keys and X.509 certificates that carry them. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6 PGD 0 Oops: 0002 [#1] SMP Modules linked in: CPU: 3 PID: 3014 Comm: keyctl Not tainted 4.9.0-rc6-fscache+ #278 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 task: ffff8804011944c0 task.stack: ffff880401294000 RIP: 0010:[<ffffffff8138ce5d>] [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6 RSP: 0018:ffff880401297ad8 EFLAGS: 00010212 RAX: 0000000000000000 RBX: ffff88040868bec0 RCX: ffff88040868bba0 RDX: ffff88040868b260 RSI: ffff88040868bec0 RDI: ffff88040868bee0 RBP: ffff880401297ba8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000047 R11: ffffffff8183b210 R12: 0000000000000000 R13: ffff8804087c7600 R14: 000000000000001f R15: ffff880401297c50 FS: 00007f7a7918c700(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000401250000 CR4: 00000000001406e0 Stack: ffff88040868bec0 0000000000000020 ffff880401297b00 ffffffff81376cd4 0000000000000100 ffff880401297b10 ffffffff81376d12 ffff880401297b30 ffffffff81376f37 0000000000000100 0000000000000000 ffff880401297ba8 Call Trace: [<ffffffff81376cd4>] ? __sg_page_iter_next+0x43/0x66 [<ffffffff81376d12>] ? sg_miter_get_next_page+0x1b/0x5d [<ffffffff81376f37>] ? sg_miter_next+0x17/0xbd [<ffffffff8138ba3a>] ? mpi_read_raw_from_sgl+0xf2/0x146 [<ffffffff8132a95c>] rsa_verify+0x9d/0xee [<ffffffff8132acca>] ? pkcs1pad_sg_set_buf+0x2e/0xbb [<ffffffff8132af40>] pkcs1pad_verify+0xc0/0xe1 [<ffffffff8133cb5e>] public_key_verify_signature+0x1b0/0x228 [<ffffffff8133d974>] x509_check_for_self_signed+0xa1/0xc4 [<ffffffff8133cdde>] x509_cert_parse+0x167/0x1a1 [<ffffffff8133d609>] x509_key_preparse+0x21/0x1a1 [<ffffffff8133c3d7>] asymmetric_key_preparse+0x34/0x61 [<ffffffff812fc9f3>] key_create_or_update+0x145/0x399 [<ffffffff812fe227>] SyS_add_key+0x154/0x19e [<ffffffff81001c2b>] do_syscall_64+0x80/0x191 [<ffffffff816825e4>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 56 41 55 41 54 53 48 81 ec a8 00 00 00 44 8b 71 04 8b 42 04 4c 8b 67 18 45 85 f6 89 45 80 0f 84 b4 06 00 00 85 c0 75 2f 41 ff ce <49> c7 04 24 01 00 00 00 b0 01 75 0b 48 8b 41 18 48 83 38 01 0f RIP [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6 RSP <ffff880401297ad8> CR2: 0000000000000000 ---[ end trace d82015255d4a5d8d ]--- Basically, this is a backport of a libgcrypt patch: http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libgcrypt.git;a=patch;h=6e1adb05d290aeeb1c230c763970695f4a538526 Fixes: cdec9cb5 ("crypto: GnuPG based MPI lib - source files (part 1)") Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
David Howells <dhowells@redhat.com> cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> cc: linux-ima-devel@lists.sourceforge.net Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Herbert Xu authored
commit 4f0414e5 upstream. We need to load the TX SG list in sendmsg(2) after waiting for incoming data, not before. [connoro@google.com: backport to 3.18, where the relevant logic is located in skcipher_recvmsg() rather than skcipher_recvmsg_sync()] Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Tested-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Connor O'Brien <connoro@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peng Fan authored
commit 716baa7b upstream. Sparse checking warning: "drivers/staging/nvec/nvec_ps2.c:172:14: warning: duplicate const". Remove the duplicated const to fix the warning. Signed-off-by:
Peng Fan <van.freenix@gmail.com> Acked-by:
Marc Dietrich <marvin24@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 69d3973a upstream. gcc-7.0.1 warns about old code in ttpci: In file included from drivers/media/pci/ttpci/av7110.c:63:0: In function 'irdebi.isra.2', inlined from 'start_debi_dma' at drivers/media/pci/ttpci/av7110.c:376:3, inlined from 'gpioirq' at drivers/media/pci/ttpci/av7110.c:659:3: drivers/media/pci/ttpci/av7110_hw.h:406:3: warning: 'memcpy': specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=] memcpy(av7110->debi_virt, (char *) &res, count); In function 'irdebi.isra.2', inlined from 'start_debi_dma' at drivers/media/pci/ttpci/av7110.c:376:3, inlined from 'gpioirq' at drivers/media/pci/ttpci/av7110.c:668:3: drivers/media/pci/ttpci/av7110_hw.h:406:3: warning: 'memcpy': specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=] memcpy(av7110->debi_virt, (char *) &res, count); Apparently, 'count' can be negative here, which will then get turned into a giant size argument for memcpy. Changing the sizes to 'unsigned int' instead seems safe as we already check for maximum sizes, and it also simplifies the code a bit. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 13f99ebd upstream. The latest gcc-7.0.1 snapshot points out that we if nr_ch is zero, we never initialize some variables: sound/pci/au88x0/au88x0_core.c: In function 'vortex_adb_allocroute': sound/pci/au88x0/au88x0_core.c:2304:68: error: 'mix[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized] sound/pci/au88x0/au88x0_core.c:2305:58: error: 'src[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized] I assume this can never happen in practice, but adding a check here doesn't hurt either and avoids the warning. The code has been unchanged since the start of git history. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit f6aafac1 upstream. aarch64-linux-gcc-7 complains about code it doesn't fully understand: drivers/infiniband/hw/qib/qib_iba7322.c: In function 'qib_7322_txchk_change': include/asm-generic/bitops/non-atomic.h:105:35: error: 'shadow' may be used uninitialized in this function [-Werror=maybe-uninitialized] The code is right, and despite trying hard, I could not come up with a version that I liked better than just adding a fake initialization here to shut up the warning. Fixes: f931551b ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gwendal Grignou authored
[ Upstream commit d85fc67d ] Without this patch, failed probe would not free resources like irq. ata port tdev object currently hold a reference to the ata port object. Therefore the ata port object release function will not get called until the ata_tport_release is called. But that would never happen, releasing the last reference of ata port dev is done by scsi_host_release, which is called by ata_host_release when the ata port object is released. The ata device objects actually do not need to explicitly hold a reference to their real counterpart, given the transport objects are the children of these objects and device_add() is call for each child. We know the parent will not be deleted until we call the child's device_del(). Reported-by:
Matthew Whitehead <tedheadster@gmail.com> Tested-by:
Matthew Whitehead <tedheadster@gmail.com> Suggested-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Darrick J. Wong authored
[ Upstream commit 08b005f1 ] The sole remaining caller of kmem_zalloc_greedy is bulkstat, which uses it to grab 1-4 pages for staging of inobt records. The infinite loop in the greedy allocation function is causing hangs[1] in generic/269, so just get rid of the greedy allocator in favor of kmem_zalloc_large. This makes bulkstat somewhat more likely to ENOMEM if there's really no pages to spare, but eliminates a source of hangs. [1] http://lkml.kernel.org/r/20170301044634.rgidgdqqiiwsmfpj%40XZHOUW.usersys.redhat.com Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shaohua Li authored
[ Upstream commit 6d399783 ] Commit 57c67df4 (md/raid10: submit IO from originating thread instead of md thread) submits bio directly for normal disks but not for replacement disks. There is no point we shouldn't do this for replacement disks. Cc: NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhu Yanjun authored
[ Upstream commit 3b12f73a ] In the function rds_ib_setup_qp, the error handle is missing. When some error occurs, it is possible that memory leak occurs. As such, error handle is added. Cc: Joe Jin <joe.jin@oracle.com> Reviewed-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Guanglei Li <guanglei.li@oracle.com> Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arvind Yadav authored
[ Upstream commit 74e3f6e6 ] Fix potential NULL pointer dereference and clean up coding style errors (code indent, trailing whitespaces). Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-