- 26 Nov, 2022 40 commits
-
-
Davide Tronchin authored
commit d9e37a5c upstream. The official LARA-R6 (00B) modem uses 0x908b PID. LARA-R6 00B does not implement a QMI interface on port 4, the reservation (RSVD(4)) has been added to meet other companies that implement QMI on that interface. LARA-R6 00B USB composition exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions Signed-off-by:
Davide Tronchin <davide.tronchin.94@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Davide Tronchin authored
commit 2ec106b9 upstream. Remove the UBLOX_PRODUCT_R6XX 0x90fa association since LARA-R6 00B final product uses a new USB composition with different PID. 0x90fa PID used only by LARA-R6 internal prototypes. Move 0x90fa PID directly in the option_ids array since used by other Qualcomm based modem vendors as pointed out in: https://lore.kernel.org/all/6572c4e6-d8bc-b8d3-4396-d879e4e76338@gmail.com Signed-off-by:
-
Benoît Monin authored
commit df3414b0 upstream. Add support for the AT and diag ports, similar to other qualcomm SDX55 modems. In QDL mode, the modem uses a different device ID and support is provided by qcserial in commit 11c52d25 ("USB: serial: qcserial: add EM9191 QDL support"). T: Bus=08 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=1199 ProdID=90d3 Rev=00.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9191 S: SerialNumber=xxxxxxxxxxxxxxxx C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) Signed-off-by:
Benoît Monin <benoit.monin@gmx.fr> Cc: stable@vger.kernel.org Signed-off-by:
-
Linus Walleij authored
commit cd136706 upstream. What the code does is to not check the return value from devm_gpiod_get() and then avoid using an erroneous GPIO descriptor with IS_ERR_OR_NULL(). This will miss real errors from the GPIO core that should not be ignored, such as probe deferral. Instead request the GPIO as explicitly optional, which means that if it doesn't exist, the descriptor returned will be NULL. Then we can add error handling and also avoid just doing this on the device tree path, and simplify the site where the optional GPIO descriptor is used. There were some problems with cleaning up this GPIO descriptor use in the past, but this is the proper way to deal with it. Cc: Rafał Miłecki <rafal@milecki.pl> Cc: Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20221107090753.1404679-1-linus.walleij@linaro.org Signed-off-by:
-
Mushahid Hussain authored
commit 0fc801f8 upstream. This patch fixes a segfault by adding a null check on synth in speakup_con_update(). The segfault can be reproduced as follows: - Login into a text console - Load speakup and speakup_soft modules - Remove speakup_soft - Switch to a graphics console This is caused by lack of a null check on `synth` in speakup_con_update(). Here's the sequence that causes the segfault: - When we remove the speakup_soft, synth_release() sets the synth to null. - After that, when we change the virtual console to graphics console, vt_notifier_call() is fired, which then calls speakup_con_update(). - Inside speakup_con_update() there's no null check on synth, so it calls synth_printf(). - Inside synth_printf(), synth_buffer_add() and synth_start(), both access synth, when it is null and causing a segfault. Therefore adding a null check on synth solves the issue. Fixes: 2610df41 ("staging: speakup: Add pause command used on switching to graphical mode") Cc: stable <stable@kernel.org> Signed-off-by:
Mushahid Hussain <mushi.shar@gmail.com> Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Link: https://lore.kernel.org/r/20221010165720.397042-1-mushi.shar@gmail.com Signed-off-by:
-
Krzysztof Kozlowski authored
commit b9c19396 upstream. Correct few frequencies in presence rate table - multiplied by 10 (110250 instead of 11025 Hz). Fixes: abb9c9b8 ("slimbus: stream: add stream support") Cc: <stable@vger.kernel.org> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220929165202.410937-1-krzysztof.kozlowski@linaro.org Signed-off-by:
-
Zheng Bin authored
commit e54fad80 upstream. If CONFIG_SLIM_QCOM_NGD_CTRL=y, CONFIG_QCOM_RPROC_COMMON=m, COMPILE_TEST=y, bulding fails: drivers/slimbus/qcom-ngd-ctrl.o: In function `qcom_slim_ngd_ctrl_probe': qcom-ngd-ctrl.c:(.text+0x330): undefined reference to `qcom_register_ssr_notifier' qcom-ngd-ctrl.c:(.text+0x5fc): undefined reference to `qcom_unregister_ssr_notifier' drivers/slimbus/qcom-ngd-ctrl.o: In function `qcom_slim_ngd_remove': qcom-ngd-ctrl.c:(.text+0x90c): undefined reference to `qcom_unregister_ssr_notifier' Make SLIM_QCOM_NGD_CTRL depends on QCOM_RPROC_COMMON || (COMPILE_TEST && !QCOM_RPROC_COMMON) to fix this. Fixes: e291691c ("slimbus: qcom-ngd-ctrl: allow compile testing without QCOM_RPROC_COMMON") Cc: stable <stable@kernel.org> Signed-off-by:
Zheng Bin <zhengbin13@huawei.com> Reviewed-by:
-
Johan Hovold authored
commit 5c294de3 upstream. This reverts commit 6000b8d9. The offending commit disabled the USB core PHY management as the dwc3 already manages the PHYs in question. Unfortunately some platforms have started relying on having USB core also controlling the PHY and this is specifically currently needed on some Exynos platforms for PHY calibration or connected device may fail to enumerate. The PHY calibration was previously handled in the dwc3 driver, but to work around some issues related to how the dwc3 driver interacts with xhci (e.g. using multiple drivers) this was moved to USB core by commits 34c7ed72 ("usb: core: phy: add support for PHY calibration") and a0a46556 ("usb: dwc3: remove generic PHY calibrate() calls"). The same PHY obviously should not be controlled from two different places, which for example do no agree on the PHY mode or power state during suspend, but as the offending patch was backported to stable, let's revert it for now. Reported-by:
Stefan Agner <stefan@agner.ch> Link: https://lore.kernel.org/lkml/808bdba846bb60456adf10a3016911ee@agner.ch/ Fixes: 6000b8d9 ("usb: dwc3: disable USB core PHY management") Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20221103144648.14197-1-johan+linaro@kernel.org Signed-off-by:
-
Takashi Iwai authored
commit 1abfd71e upstream. Samsung Galaxy Book Pro 360 (13" 2021 NP930QBD-ke1US) with codec SSID 144d:c1a6 requires the same workaround for enabling the speaker amp like other Samsung models with ALC298 codec. Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1205100 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221115170235.18875-1-tiwai@suse.de Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Emil Flink authored
commit b18a4563 upstream. The Samsung Galaxy Book Pro seems to have the same issue as a few other Samsung laptops, detailed in kernel bug report 207423. Sound from headphone jack works, but not the built-in speakers. alsa-info: http://alsa-project.org/db/?f=b40ba609dc6ae28dc84ad404a0d8a4bbcd8bea6d Signed-off-by:
Emil Flink <emil.flink@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221115144500.7782-1-emil.flink@gmail.com Signed-off-by:
-
Takashi Iwai authored
commit ad72c3c3 upstream. snd_usbmidi_output_open() has a check of the NULL port with snd_BUG_ON(). snd_BUG_ON() was used as this shouldn't have happened, but in reality, the NULL port may be seen when the device gives an invalid endpoint setup at the descriptor, hence the driver skips the allocation. That is, the check itself is valid and snd_BUG_ON() should be dropped from there. Otherwise it's confusing as if it were a real bug, as recently syzbot stumbled on it. Reported-by: syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20221112141223.6144-1-tiwai@suse.de Signed-off-by:
-
Rodrigo Siqueira authored
commit 7af87fc1 upstream. On IGT, there is a test named amd_hotplug, and when the subtest basic is executed on DCN31, we get the following error: [drm] *ERROR* [CRTC:71:crtc-0] flip_done timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CRTC:71:crtc-0] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CONNECTOR:88:DP-1] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [PLANE:59:plane-3] commit wait timed out After enable the page flip log with the below command: echo -n 'format "[PFLIP]" +p' > /sys/kernel/debug/dynamic_debug/control It is possible to see that the flip was submitted, but DC never replied back, which generates time-out issues. This is an indication that the HUBP surface flip is missing. This commit fixes this issue by adding hubp1_set_flip_int to DCN31. Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Shang XiaoJing authored
commit 22ea4ca9 upstream. When test_gen_kprobe_cmd() failed after kprobe_event_gen_cmd_end(), it will goto delete, which will call kprobe_event_delete() and release the corresponding resource. However, the trace_array in gen_kretprobe_test will point to the invalid resource. Set gen_kretprobe_test to NULL after called kprobe_event_delete() to prevent null-ptr-deref. BUG: kernel NULL pointer dereference, address: 0000000000000070 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 246 Comm: modprobe Tainted: G W 6.1.0-rc1-00174-g9522dc5c87da-dirty #248 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:__ftrace_set_clr_event_nolock+0x53/0x1b0 Code: e8 82 26 fc ff 49 8b 1e c7 44 24 0c ea ff ff ff 49 39 de 0f 84 3c 01 00 00 c7 44 24 18 00 00 00 00 e8 61 26 fc ff 48 8b 6b 10 <44> 8b 65 70 4c 8b 6d 18 41 f7 c4 00 02 00 00 75 2f RSP: 0018:ffffc9000159fe00 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88810971d268 RCX: 0000000000000000 RDX: ffff8881080be600 RSI: ffffffff811b48ff RDI: ffff88810971d058 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: ffffc9000159fe58 R11: 0000000000000001 R12: ffffffffa0001064 R13: ffffffffa000106c R14: ffff88810971d238 R15: 0000000000000000 FS: 00007f89eeff6540(0000) GS:ffff88813b600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000070 CR3: 000000010599e004 CR4: 0000000000330ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __ftrace_set_clr_event+0x3e/0x60 trace_array_set_clr_event+0x35/0x50 ? 0xffffffffa0000000 kprobe_event_gen_test_exit+0xcd/0x10b [kprobe_event_gen_test] __x64_sys_delete_module+0x206/0x380 ? lockdep_hardirqs_on_prepare+0xd8/0x190 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f89eeb061b7 Link: https://lore.kernel.org/all/20221108015130.28326-3-shangxiaojing@huawei.com/ Fixes: 64836248 ("tracing: Add kprobe event command generation test module") Signed-off-by:
Shang XiaoJing <shangxiaojing@huawei.com> Cc: stable@vger.kernel.org Acked-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by:
-
Shang XiaoJing authored
commit e0d75267 upstream. When trace_get_event_file() failed, gen_kretprobe_test will be assigned as the error code. If module kprobe_event_gen_test is removed now, the null pointer dereference will happen in kprobe_event_gen_test_exit(). Check if gen_kprobe_test or gen_kretprobe_test is error code or NULL before dereference them. BUG: kernel NULL pointer dereference, address: 0000000000000012 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 2210 Comm: modprobe Not tainted 6.1.0-rc1-00171-g2159299a3b74-dirty #217 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:kprobe_event_gen_test_exit+0x1c/0xb5 [kprobe_event_gen_test] Code: Unable to access opcode bytes at 0xffffffff9ffffff2. RSP: 0018:ffffc900015bfeb8 EFLAGS: 00010246 RAX: ffffffffffffffea RBX: ffffffffa0002080 RCX: 0000000000000000 RDX: ffffffffa0001054 RSI: ffffffffa0001064 RDI: ffffffffdfc6349c RBP: ffffffffa0000000 R08: 0000000000000004 R09: 00000000001e95c0 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000800 R13: ffffffffa0002420 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f56b75be540(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff9ffffff2 CR3: 000000010874a006 CR4: 0000000000330ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __x64_sys_delete_module+0x206/0x380 ? lockdep_hardirqs_on_prepare+0xd8/0x190 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://lore.kernel.org/all/20221108015130.28326-2-shangxiaojing@huawei.com/ Fixes: 64836248 ("tracing: Add kprobe event command generation test module") Signed-off-by:
-
Steven Rostedt (Google) authored
commit 94eedf3d upstream. The flag that tells the event to call its triggers after reading the event is set for eprobes after the eprobe is enabled. This leads to a race where the eprobe may be triggered at the beginning of the event where the record information is NULL. The eprobe then dereferences the NULL record causing a NULL kernel pointer bug. Test for a NULL record to keep this from happening. Link: https://lore.kernel.org/linux-trace-kernel/20221116192552.1066630-1-rafaelmendsr@gmail.com/ Link: https://lore.kernel.org/linux-trace-kernel/20221117214249.2addbe10@gandalf.local.home Cc: Linux Trace Kernel <linux-trace-kernel@vger.kernel.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: Tom Zanussi <zanussi@kernel.org> Cc: stable@vger.kernel.org Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events") Acked-by:
Rafael Mendonca <rafaelmendsr@gmail.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
-
Shang XiaoJing authored
commit 1b5f1c34 upstream. In register_synth_event(), if set_synth_event_print_fmt() failed, then both trace_remove_event_call() and unregister_trace_event() will be called, which means the trace_event_call will call __unregister_trace_event() twice. As the result, the second unregister will causes the wild-memory-access. register_synth_event set_synth_event_print_fmt failed trace_remove_event_call event_remove if call->event.funcs then __unregister_trace_event (first call) unregister_trace_event __unregister_trace_event (second call) Fix the bug by avoiding to call the second __unregister_trace_event() by checking if the first one is called. general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN PTI KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] CPU: 0 PID: 3807 Comm: modprobe Not tainted 6.1.0-rc1-00186-g76f33a7eedb4 #299 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:unregister_trace_event+0x6e/0x280 Code: 00 fc ff df 4c 89 ea 48 c1 ea 03 80 3c 02 00 0f 85 0e 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 63 08 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 e2 01 00 00 49 89 2c 24 48 85 ed 74 28 e8 7a 9b RSP: 0018:ffff88810413f370 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffff888105d050b0 RCX: 0000000000000000 RDX: 1bd5a00000000024 RSI: ffff888119e276e0 RDI: ffffffff835a8b20 RBP: dead000000000100 R08: 0000000000000000 R09: fffffbfff0913481 R10: ffffffff8489a407 R11: fffffbfff0913480 R12: dead000000000122 R13: ffff888105d050b8 R14: 0000000000000000 R15: ffff888105d05028 FS: 00007f7823e8d540(0000) GS:ffff888119e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7823e7ebec CR3: 000000010a058002 CR4: 0000000000330ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __create_synth_event+0x1e37/0x1eb0 create_or_delete_synth_event+0x110/0x250 synth_event_run_command+0x2f/0x110 test_gen_synth_cmd+0x170/0x2eb [synth_event_gen_test] synth_event_gen_test_init+0x76/0x9bc [synth_event_gen_test] do_one_initcall+0xdb/0x480 do_init_module+0x1cf/0x680 load_module+0x6a50/0x70a0 __do_sys_finit_module+0x12f/0x1c0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://lkml.kernel.org/r/20221117012346.22647-3-shangxiaojing@huawei.com Fixes: 4b147936 ("tracing: Add support for 'synthetic' events") Signed-off-by:
-
Shang XiaoJing authored
commit a4527fef upstream. test_gen_synth_cmd() only free buf in fail path, hence buf will leak when there is no failure. Add kfree(buf) to prevent the memleak. The same reason and solution in test_empty_synth_event(). unreferenced object 0xffff8881127de000 (size 2048): comm "modprobe", pid 247, jiffies 4294972316 (age 78.756s) hex dump (first 32 bytes): 20 67 65 6e 5f 73 79 6e 74 68 5f 74 65 73 74 20 gen_synth_test 20 70 69 64 5f 74 20 6e 65 78 74 5f 70 69 64 5f pid_t next_pid_ backtrace: [<000000004254801a>] kmalloc_trace+0x26/0x100 [<0000000039eb1cf5>] 0xffffffffa00083cd [<000000000e8c3bc8>] 0xffffffffa00086ba [<00000000c293d1ea>] do_one_initcall+0xdb/0x480 [<00000000aa189e6d>] do_init_module+0x1cf/0x680 [<00000000d513222b>] load_module+0x6a50/0x70a0 [<000000001fd4d529>] __do_sys_finit_module+0x12f/0x1c0 [<00000000b36c4c0f>] do_syscall_64+0x3f/0x90 [<00000000bbf20cf3>] entry_SYSCALL_64_after_hwframe+0x63/0xcd unreferenced object 0xffff8881127df000 (size 2048): comm "modprobe", pid 247, jiffies 4294972324 (age 78.728s) hex dump (first 32 bytes): 20 65 6d 70 74 79 5f 73 79 6e 74 68 5f 74 65 73 empty_synth_tes 74 20 20 70 69 64 5f 74 20 6e 65 78 74 5f 70 69 t pid_t next_pi backtrace: [<000000004254801a>] kmalloc_trace+0x26/0x100 [<00000000d4db9a3d>] 0xffffffffa0008071 [<00000000c31354a5>] 0xffffffffa00086ce [<00000000c293d1ea>] do_one_initcall+0xdb/0x480 [<00000000aa189e6d>] do_init_module+0x1cf/0x680 [<00000000d513222b>] load_module+0x6a50/0x70a0 [<000000001fd4d529>] __do_sys_finit_module+0x12f/0x1c0 [<00000000b36c4c0f>] do_syscall_64+0x3f/0x90 [<00000000bbf20cf3>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://lkml.kernel.org/r/20221117012346.22647-2-shangxiaojing@huawei.com Cc: <mhiramat@kernel.org> Cc: <zanussi@kernel.org> Cc: <fengguang.wu@intel.com> Cc: stable@vger.kernel.org Fixes: 9fe41efa ("tracing: Add synth event generation test module") Signed-off-by:
-
Steven Rostedt (Google) authored
commit 42fb0a1e upstream. Currently the way polling works on the ring buffer is broken. It will return immediately if there's any data in the ring buffer whereas a read will block until the watermark (defined by the tracefs buffer_percent file) is hit. That is, a select() or poll() will return as if there's data available, but then the following read will block. This is broken for the way select()s and poll()s are supposed to work. Have the polling on the ring buffer also block the same way reads and splice does on the ring buffer. Link: https://lkml.kernel.org/r/20221020231427.41be3f26@gandalf.local.home Cc: Linux Trace Kernel <linux-trace-kernel@vger.kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Primiano Tucci <primiano@google.com> Cc: stable@vger.kernel.org Fixes: 1e0d6714 ("ring-buffer: Do not wake up a splice waiter when page is not full") Signed-off-by:
-
Wang Yufen authored
commit 649e7207 upstream. kmemleak reports this issue: unreferenced object 0xffff888105a18900 (size 128): comm "test_progs", pid 18933, jiffies 4336275356 (age 22801.766s) hex dump (first 32 bytes): 25 73 00 90 81 88 ff ff 26 05 00 00 42 01 58 04 %s......&...B.X. 03 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000560143a1>] __kmalloc_node_track_caller+0x4a/0x140 [<000000006af00822>] krealloc+0x8d/0xf0 [<00000000c309be6a>] trace_iter_expand_format+0x99/0x150 [<000000005a53bdb6>] trace_check_vprintf+0x1e0/0x11d0 [<0000000065629d9d>] trace_event_printf+0xb6/0xf0 [<000000009a690dc7>] trace_raw_output_bpf_trace_printk+0x89/0xc0 [<00000000d22db172>] print_trace_line+0x73c/0x1480 [<00000000cdba76ba>] tracing_read_pipe+0x45c/0x9f0 [<0000000015b58459>] vfs_read+0x17b/0x7c0 [<000000004aeee8ed>] ksys_read+0xed/0x1c0 [<0000000063d3d898>] do_syscall_64+0x3b/0x90 [<00000000a06dda7f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd iter->fmt alloced in tracing_read_pipe() -> .. ->trace_iter_expand_format(), but not freed, to fix, add free in tracing_release_pipe() Link: https://lkml.kernel.org/r/1667819090-4643-1-git-send-email-wangyufen@huawei.com Cc: stable@vger.kernel.org Fixes: efbbdaa2 ("tracing: Show real address for trace event arguments") Acked-by:
Wang Yufen <wangyufen@huawei.com> Signed-off-by:
-
Daniil Tatianin authored
commit 56f4ca0a upstream. rb_head_page_deactivate() expects cpu_buffer to contain a valid list of ->pages, so verify that the list is actually present before calling it. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Link: https://lkml.kernel.org/r/20221114143129.3534443-1-d-tatianin@yandex-team.ru Cc: stable@vger.kernel.org Fixes: 77ae365e ("ring-buffer: make lockless") Signed-off-by:
Daniil Tatianin <d-tatianin@yandex-team.ru> Signed-off-by:
-
Xiu Jianfeng authored
commit 19ba6c8a upstream. The @ftrace_mod is allocated by kzalloc(), so both the members {prev,next} of @ftrace_mode->list are NULL, it's not a valid state to call list_del(). If kstrdup() for @ftrace_mod->{func|module} fails, it goes to @out_free tag and calls free_ftrace_mod() to destroy @ftrace_mod, then list_del() will write prev->next and next->prev, where null pointer dereference happens. BUG: kernel NULL pointer dereference, address: 0000000000000008 Oops: 0002 [#1] PREEMPT SMP NOPTI Call Trace: <TASK> ftrace_mod_callback+0x20d/0x220 ? do_filp_open+0xd9/0x140 ftrace_process_regex.isra.51+0xbf/0x130 ftrace_regex_write.isra.52.part.53+0x6e/0x90 vfs_write+0xee/0x3a0 ? __audit_filter_op+0xb1/0x100 ? auditd_test_task+0x38/0x50 ksys_write+0xa5/0xe0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Kernel panic - not syncing: Fatal exception So call INIT_LIST_HEAD() to initialize the list member to fix this issue. Link: https://lkml.kernel.org/r/20221116015207.30858-1-xiujianfeng@huawei.com Cc: stable@vger.kernel.org Fixes: 673feb9d ("ftrace: Add :mod: caching infrastructure to trace_array") Signed-off-by:
Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by:
-
Wang Wensheng authored
commit bcea02b0 upstream. If we can't allocate this size, try something smaller with half of the size. Its order should be decreased by one instead of divided by two. Link: https://lkml.kernel.org/r/20221109094434.84046-3-wangwensheng4@huawei.com Cc: <mhiramat@kernel.org> Cc: <mark.rutland@arm.com> Cc: stable@vger.kernel.org Fixes: a7900875 ("ftrace: Allocate the mcount record pages as groups") Signed-off-by:
Wang Wensheng <wangwensheng4@huawei.com> Signed-off-by:
-
Wang Wensheng authored
commit 08948cae upstream. If the number of mcount entries is an integer multiple of ENTRIES_PER_PAGE, the page count showing on the console would be wrong. Link: https://lkml.kernel.org/r/20221109094434.84046-2-wangwensheng4@huawei.com Cc: <mhiramat@kernel.org> Cc: <mark.rutland@arm.com> Cc: stable@vger.kernel.org Fixes: 5821e1b7 ("function tracing: fix wrong pos computing when read buffer has been fulfilled") Signed-off-by:
-
Anastasia Belova authored
[ Upstream commit a51e5d29 ] If the returning value of SMB2_set_info_init is an error-value, exit the function. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 0967e545 ("cifs: use a compound for setting an xattr") Signed-off-by:
Anastasia Belova <abelova@astralinux.ru> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yuan Can authored
[ Upstream commit f524b728 ] A problem about insmod thunderbolt-net failed is triggered with following log given while lsmod does not show thunderbolt_net: insmod: ERROR: could not insert module thunderbolt-net.ko: File exists The reason is that tbnet_init() returns tb_register_service_driver() directly without checking its return value, if tb_register_service_driver() failed, it returns without removing property directory, resulting the property directory can never be created later. tbnet_init() tb_register_property_dir() # register property directory tb_register_service_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without remove property directory Fix by remove property directory when tb_register_service_driver() returns error. Fixes: e69b6c02 ("net: Add support for networking over Thunderbolt cable") Signed-off-by:
Yuan Can <yuancan@huawei.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Shang XiaoJing authored
[ Upstream commit 639f5d00 ] sparx_stats_init() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: sparx_stats_init() create_singlethread_workqueue() # failed, sparx5->stats_queue is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL. So as sparx5_start(). Fixes: af4b1102 ("net: sparx5: add ethtool configuration and statistics support") Fixes: b37a1bae ("net: sparx5: add mactable support") Signed-off-by:
-
Zhang Xiaoxu authored
[ Upstream commit 92bbd67a ] The return value of CIFSGetExtAttr is negative, should be checked with -EOPNOTSUPP rather than EOPNOTSUPP. Fixes: 64a5cfa6 ("Allow setting per-file compression via SMB2/3") Signed-off-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 2929cceb ] x25_lapb_receive_frame() using skb_copy() to get a private copy of skb, the new skb should be freed in the undersized/fragmented skb error handling path. Otherwise there is a memory leak. Fixes: cb101ed2 ("x25: Handle undersized/fragmented skbs") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20221114110519.514538-1-weiyongjun@huaweicloud.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Liu Jian authored
[ Upstream commit c9b895c6 ] If ag71xx_hw_enable() fails, call phylink_disconnect_phy() to clean up. And if phylink_of_phy_connect() fails, nothing needs to be done. Compile tested only. Fixes: 892e0915 ("net: ag71xx: port to phylink") Signed-off-by:
Liu Jian <liujian56@huawei.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221114095549.40342-1-liujian56@huawei.com Signed-off-by:
-
Anastasia Belova authored
[ Upstream commit d520de6c ] If the returning value of SMB2_close_init is an error-value, exit the function. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 352d96f3 ("cifs: multichannel: move channel selection above transport layer") Signed-off-by:
-
Maximilian Luz authored
[ Upstream commit d9a477f6 ] Currently, we check any received packet whether we have already seen it previously, regardless of the packet type (sequenced / unsequenced). We do this by checking the sequence number. This assumes that sequence numbers are valid for both sequenced and unsequenced packets. However, this assumption appears to be incorrect. On some devices, the sequence number field of unsequenced packets (in particular HID input events on the Surface Pro 9) is always zero. As a result, the current retransmission check kicks in and discards all but the first unsequenced packet, breaking (among other things) keyboard and touchpad input. Note that we have, so far, only seen packets being retransmitted in sequenced communication. In particular, this happens when there is an ACK timeout, causing the EC (or us) to re-send the packet waiting for an ACK. Arguably, retransmission / duplication of unsequenced packets should not be an issue as there is no logical condition (such as an ACK timeout) to determine when a packet should be sent again. Therefore, remove the retransmission check for unsequenced packets entirely to resolve the issue. Fixes: c167b9c7 ("platform/surface: Add Surface Aggregator subsystem") Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221113185951.224759-1-luzmaximilian@gmail.com Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Roger Pau Monné authored
[ Upstream commit 2dbfb3f3 ] The current logic in the Intel PMC driver will forcefully attach it when detecting any CPU on the intel_pmc_core_platform_ids array, even if the matching ACPI device is not present. There's no checking in pmc_core_probe() to assert that the PMC device is present, and hence on virtualized environments the PMC device probes successfully, even if the underlying registers are not present. Before commit 21ae4357 ("platform/x86: intel_pmc_core: Substitute PCI with CPUID enumeration") the driver would check for the presence of a specific PCI device, and that prevented the driver from attaching when running virtualized. Fix by only forcefully attaching the PMC device when not running virtualized. Note that virtualized platforms can still get the device to load if the appropriate ACPI device is present on the tables provided to the VM. Make an exception for the Xen initial domain, which does have full hardware access, and hence can attach to the PMC if present. Fixes: 21ae4357 ("platform/x86: intel_pmc_core: Substitute PCI with CPUID enumeration") Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Acked-by:
David E. Box <david.e.box@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221110163145.80374-1-roger.pau@citrix.com Reviewed-by:
-
Dan Carpenter authored
[ Upstream commit a7a15981 ] The drbd_destroy_connection() frees the "connection" so use the _safe() iterator to prevent a use after free. Fixes: b6f85ef9 ("drbd: Iterate over all connections") Signed-off-by:
Dan Carpenter <error27@gmail.com> Reviewed-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/Y3Jd5iZRbNQ9w6gm@kili Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 9d45921e ] The bridge driver can offload VLANs to the underlying hardware either via switchdev or the 8021q driver. When the former is used, the VLAN is marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV' private flag. To avoid the memory leaks mentioned in the cited commit, the bridge driver will try to delete a VLAN via the 8021q driver if the VLAN is not marked with the previously mentioned flag. When the VLAN protocol of the bridge changes, switchdev drivers are notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but the 8021q driver is also called to add the existing VLANs with the new protocol and delete them with the old protocol. In case the VLANs were offloaded via switchdev, the above behavior is both redundant and buggy. Redundant because the VLANs are already programmed in hardware and drivers that support VLAN protocol change (currently only mlx5) change the protocol upon the switchdev attribute notification. Buggy because the 8021q driver is called despite these VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to memory leaks [1] when the VLANs are deleted. Fix by not calling the 8021q driver for VLANs that were already programmed via switchdev. [1] unreferenced object 0xffff8881f6771200 (size 256): comm "ip", pid 446855, jiffies 4298238841 (age 55.240s) hex dump (first 32 bytes): 00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000012819ac>] vlan_vid_add+0x437/0x750 [<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920 [<000000000632b56f>] br_changelink+0x3d6/0x13f0 [<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0 [<00000000f6276baf>] rtnl_newlink+0x5f/0x90 [<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00 [<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340 [<0000000010588814>] netlink_unicast+0x438/0x710 [<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40 [<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0 [<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0 [<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0 [<00000000684f7e25>] __sys_sendmsg+0xab/0x130 [<000000004538b104>] do_syscall_64+0x3d/0x90 [<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 27973793 ("net: bridge: Fix VLANs memory leak") Reported-by:
Vlad Buslov <vladbu@nvidia.com> Tested-by:
Ido Schimmel <idosch@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20221114084509.860831-1-idosch@nvidia.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Guangbin Huang authored
[ Upstream commit 510d7b6a ] Currently, if driver is in phy-imp(phy controlled by imp firmware) mode, as driver did not update phy link ksettings after initialization process or not update advertising when getting phy link ksettings from firmware, it may set incorrect phy link ksettings for firmware in resetting process. So fix it. Fixes: f5f2b3e4 ("net: hns3: add support for imp-controlled PHYs") Fixes: c5ef83cb ("net: hns3: fix for phy_addr error in hclge_mac_mdio_config") Fixes: 2312e050 ("net: hns3: Fix for deadlock problem occurring when unregistering ae_algo") Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
Hao Lan <lanhao@huawei.com> Signed-off-by:
-
Yuan Can authored
[ Upstream commit d349e9be ] The ena_init() won't destroy workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/r/20221114025659.124726-1-yuancan@huawei.com Signed-off-by:
-
Yuan Can authored
[ Upstream commit 280c0f7c ] A problem about ionic create debugfs failed is triggered with the following log given: [ 415.799514] debugfs: Directory 'ionic' with parent '/' already present! The reason is that ionic_init_module() returns ionic_bus_register_driver() directly without checking its return value, if ionic_bus_register_driver() failed, it returns without destroy the newly created debugfs, resulting the debugfs of ionic can never be created later. ionic_init_module() ionic_debugfs_create() # create debugfs directory ionic_bus_register_driver() pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when ionic_bus_register_driver() returns error. Fixes: fbfb8031 ("ionic: Add hardware init and device commands") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20221113092929.19161-1-yuancan@huawei.com Signed-off-by:
-
Yang Yingliang authored
[ Upstream commit da36a2a7 ] In device_add(), dev_set_name() is called to allocate name, if it returns error, the name need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(). Fixes: f65c9bb3 ("xen/pcpu: Xen physical cpus online/offline sys interface") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20221110152441.401630-1-yangyingliang@huawei.com Signed-off-by:
-
Vladimir Oltean authored
[ Upstream commit ed1fe1be ] There are multi-generational drivers like mv88e6xxx which have code like this: int mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr) { if (!chip->info->ptp_support) return -EOPNOTSUPP; ... } DSA wants to deny PTP timestamping on the master if the switch supports timestamping too. However it currently relies on the presence of the port_hwtstamp_get() callback to determine PTP capability, and this clearly does not work in that case (method is present but returns -EOPNOTSUPP). We should not deny PTP on the DSA master for those switches which truly do not support hardware timestamping. Create a dsa_port_supports_hwtstamp() method which actually probes for support by calling port_hwtstamp_get() and seeing whether that returned -EOPNOTSUPP or not. Fixes: f685e609 ("net: dsa: Deny PTP on master if switch supports it") Link: https://patchwork.kernel.org/project/netdevbpf/patch/20221110124345.3901389-1-festevam@gmail.com/ Reported-by:
Fabio Estevam <festevam@gmail.com> Reported-by:
Steffen Bätz <steffen@innosonix.de> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by:
Fabio Estevam <festevam@denx.de> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit f7c125bd ] MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch calls free_netdev() to fix it since netdev_priv is used after unregister. Fixes: 13adac03 ("net: mhi_net: Register wwan_ops for link creation") Signed-off-by:
-
