- 22 May, 2021 24 commits
-
-
Rodrigo Siqueira authored
[ Upstream commit 16e9b3e5 ] Our driver supports overlay planes, and as expected, some userspace compositor takes advantage of these features. If the userspace is not enabling the cursor, they can use multiple planes as they please. Nevertheless, we start to have constraints when userspace tries to enable hardware cursor with various planes. Basically, we cannot draw the cursor at the same size and position on two separated pipes since it uses extra bandwidth and DML only run with one cursor. For those reasons, when we enable hardware cursor and multiple planes, our driver should accept variations like the ones described below: +-------------+ +--------------+ | +---------+ | | | | |Primary | | | Primary | | | | | | Overlay | | +---------+ | | | |Overlay | | | +-------------+ +--------------+ In this scenario, we can have the desktop UI in the overlay and some other framebuffer attached to the primary plane (e.g., video). However, userspace needs to obey some rules and avoid scenarios like the ones described below (when enabling hw cursor): +--------+ |Overlay | +-------------+ +-----+-------+ +-| |--+ | +--------+ | +--------+ | | +--------+ | | |Overlay | | |Overlay | | | | | | | | | | | | | | +--------+ | +--------+ | | | | Primary | | Primary | | Primary | +-------------+ +-------------+ +-------------+ +-------------+ +-------------+ | +--------+ | Primary | | |Overlay | | | | | | | | | +--------+ | +--------+ | | Primary | | |Overlay | | +-------------+ +-| |--+ +--------+ If the userspace violates some of the above scenarios, our driver needs to reject the commit; otherwise, we can have unexpected behavior. Since we don't have a proper driver validation for the above case, we can see some problems like a duplicate cursor in applications that use multiple planes. This commit fixes the cursor issue and others by adding adequate verification for multiple planes. Change since V1 (Harry and Sean): - Remove cursor verification from the equation. Cc: Louis Li <Ching-shih.Li@amd.com> Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zhang Zhengming authored
[ Upstream commit 59259ff7 ] There is a crash in the function br_get_link_af_size_filtered, as the port_exists(dev) is true and the rx_handler_data of dev is NULL. But the rx_handler_data of dev is correct saved in vmcore. The oops looks something like: ... pc : br_get_link_af_size_filtered+0x28/0x1c8 [bridge] ... Call trace: br_get_link_af_size_filtered+0x28/0x1c8 [bridge] if_nlmsg_size+0x180/0x1b0 rtnl_calcit.isra.12+0xf8/0x148 rtnetlink_rcv_msg+0x334/0x370 netlink_rcv_skb+0x64/0x130 rtnetlink_rcv+0x28/0x38 netlink_unicast+0x1f0/0x250 netlink_sendmsg+0x310/0x378 sock_sendmsg+0x4c/0x70 __sys_sendto+0x120/0x150 __arm64_sys_sendto+0x30/0x40 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc In br_add_if(), we found there is no guarantee that assigning rx_handler_data to dev->rx_handler_data will before setting the IFF_BRIDGE_PORT bit of priv_flags. So there is a possible data competition: CPU 0: CPU 1: (RCU read lock) (RTNL lock) rtnl_calcit() br_add_slave() if_nlmsg_size() br_add_if() br_get_link_af_size_filtered() -> netdev_rx_handler_register ... // The order is not guaranteed ... -> dev->priv_flags |= IFF_BRIDGE_PORT; // The IFF_BRIDGE_PORT bit of priv_flags has been set -> if (br_port_exists(dev)) { // The dev->rx_handler_data has NOT been assigned -> p = br_port_get_rcu(dev); .... -> rcu_assign_pointer(dev->rx_handler_data, rx_handler_data); ... Fix it in br_get_link_af_size_filtered, using br_port_get_check_rcu() and checking the return value. Signed-off-by:
Zhang Zhengming <zhangzhengming@huawei.com> Reviewed-by:
Zhao Lei <zhaolei69@huawei.com> Reviewed-by:
Wang Xiaogang <wangxiaogang3@huawei.com> Suggested-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Bodo Stroesser authored
[ Upstream commit 9814b55c ] If tcmu_handle_completions() finds an invalid cmd_id while looping over cmd responses from userspace it sets TCMU_DEV_BIT_BROKEN and breaks the loop. This means that it does further handling for the tcmu device. Skip that handling by replacing 'break' with 'return'. Additionally change tcmu_handle_completions() from unsigned int to bool, since the value used in return already is bool. Link: https://lore.kernel.org/r/20210423150123.24468-1-bostroesser@gmail.com Signed-off-by:
Bodo Stroesser <bostroesser@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Jeff Layton authored
[ Upstream commit 10a7052c ] Ensure that we invalidate the fscache whenever we invalidate the pagecache. Signed-off-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
James Smart authored
[ Upstream commit e1364711 ] In devloss timer handler and in backend calls to terminate remote port I/O, there is logic to walk through all active IOCBs and validate them to potentially trigger an abort request. This logic is causing illegal memory accesses which leads to a crash. Abort IOCBs, which may be on the list, do not have an associated lpfc_io_buf struct. The driver is trying to map an lpfc_io_buf struct on the IOCB and which results in a bogus address thus the issue. Fix by skipping over ABORT IOCBs (CLOSE IOCBs are ABORTS that don't send ABTS) in the IOCB scan logic. Link: https://lore.kernel.org/r/20210421234433.102079-1-jsmart2021@gmail.com Co-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 7ce04771 ] Prior to clang 13.0.0, the RISC-V name for the mcount symbol was "mcount", which differs from the GCC version of "_mcount", which results in the following errors: riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_level': main.c:(.text+0xe): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_start': main.c:(.text+0x4e): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_finish': main.c:(.text+0x92): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `.LBB32_28': main.c:(.text+0x30c): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `free_initmem': main.c:(.text+0x54c): undefined reference to `mcount' This has been corrected in https://reviews.llvm.org/D98881 but the minimum supported clang version is 10.0.1. To avoid build errors and to gain a working function tracer, adjust the name of the mcount symbol for older versions of clang in mount.S and recordmcount.pl. Link: https://github.com/ClangBuiltLinux/linux/issues/1331 Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 2f095504 ] Clang can generate R_RISCV_CALL_PLT relocations to _mcount: $ llvm-objdump -dr build/riscv/init/main.o | rg mcount 000000000000000e: R_RISCV_CALL_PLT _mcount 000000000000004e: R_RISCV_CALL_PLT _mcount After this, the __start_mcount_loc section is properly generated and function tracing still works. Link: https://github.com/ClangBuiltLinux/linux/issues/1331 Signed-off-by:
Fangrui Song <maskray@google.com> Signed-off-by:
-
Manivannan Sadhasivam authored
[ Upstream commit 57ac5166 ] On Qualcomm ARM32 platforms, the SMC call can return before it has completed. If this occurs, the call can be restarted, but it requires using the returned session ID value from the interrupted SMC call. The ARM32 SMCC code already has the provision to add platform specific quirks for things like this. So let's make use of it and add the Qualcomm specific quirk (ARM_SMCCC_QUIRK_QCOM_A6) used by the QCOM_SCM driver. This change is similar to the below one added for ARM64 a while ago: commit 82bcd087 ("firmware: qcom: scm: Fix interrupted SCM calls") Without this change, the Qualcomm ARM32 platforms like SDX55 will return -EINVAL for SMC calls used for modem firmware loading and validation. Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit ad3d1991 ] CONFIG_GCOV doesn't work with modules, and for various reasons it cannot work, see also https://lore.kernel.org/r/d36ea54d8c0a8dd706826ba844a6f27691f45d55.camel@sipsolutions.net Make CONFIG_GCOV depend on !MODULES to avoid anyone running into issues there. This also means we need not export the gcov symbols. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit d5027ca6 ] Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 #45 0x00007f8990968b85 in __getgrnam_r [...] #46 0x00007f89909d6b77 in grantpt [...] #47 0x00007f8990a9394e in __GI_openpty [...] #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by:
Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by:
Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By:
-
Hans de Goede authored
[ Upstream commit e4791877 ] Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 65299e8b ] Several users have been reporting that elants_i2c gives several errors during probe and that their touchscreen does not work on their Lenovo AMD based laptops with a touchscreen with a ELAN0001 ACPI hardware-id: [ 0.550596] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vcc33 not found, using dummy regulator [ 0.551836] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vccio not found, using dummy regulator [ 0.560932] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.562427] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.595925] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.597974] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.621893] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.622504] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.632650] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (4d 61 69 6e): -121 [ 0.634256] elants_i2c i2c-ELAN0001:00: boot failed: -121 [ 0.699212] elants_i2c i2c-ELAN0001:00: invalid 'hello' packet: 00 00 ff ff [ 1.630506] elants_i2c i2c-ELAN0001:00: Failed to read fw id: -121 [ 1.645508] elants_i2c i2c-ELAN0001:00: unknown packet 00 00 ff ff Despite these errors, the elants_i2c driver stays bound to the device (it returns 0 from its probe method despite the errors), blocking the i2c-hid driver from binding. Manually unbinding the elants_i2c driver and binding the i2c-hid driver makes the touchscreen work. Check if the ACPI-fwnode for the touchscreen contains one of the i2c-hid compatiblity-id strings and if it has the I2C-HID spec's DSM to get the HID descriptor address, If it has both then make elants_i2c not bind, so that the i2c-hid driver can bind. This assumes that non of the (older) elan touchscreens which actually need the elants_i2c driver falsely advertise an i2c-hid compatiblity-id + DSM in their ACPI-fwnodes. If some of them actually do have this false advertising, then this change may lead to regressions. While at it also drop the unnecessary DEVICE_NAME prefixing of the "I2C check functionality error", dev_err already outputs the driver-name. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207759 Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Feilong Lin authored
[ Upstream commit 3bbfd319 ] In enable_slot(), if pci_get_slot() returns NULL, we clear the SLOT_ENABLED flag. When pci_get_slot() finds a device, it increments the device's reference count. In this case, we did not call pci_dev_put() to decrement the reference count, so the memory of the device (struct pci_dev type) will eventually leak. Call pci_dev_put() to decrement its reference count when pci_get_slot() returns a PCI device. Link: https://lore.kernel.org/r/b411af88-5049-a1c6-83ac-d104a1f429be@huawei.com Signed-off-by:
Feilong Lin <linfeilong@huawei.com> Signed-off-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
louis.wang authored
[ Upstream commit 8252ca87 ] Enabling function_graph tracer on ARM causes kernel panic, because the function graph tracer updates the "return address" of a function in order to insert a trace callback on function exit, it saves the function's original return address in a return trace stack, but cpu_suspend() may not return through the normal return path. cpu_suspend() will resume directly via the cpu_resume path, but the return trace stack has been set-up by the subfunctions of cpu_suspend(), which makes the "return address" inconsistent with cpu_suspend(). This patch refers to Commit de818bd4 ("arm64: kernel: pause/unpause function graph tracer in cpu_suspend()"), fixes the issue by pausing/resuming the function graph tracer on the thread executing cpu_suspend(), so that the function graph tracer state is kept consistent across functions that enter power down states and never return by effectively disabling graph tracer while they are executing. Signed-off-by:
louis.wang <liang26812@gmail.com> Signed-off-by:
-
Gustavo Pimentel authored
[ Upstream commit e970dcc4 ] When the driver is compiled as a module and loaded if we try to unload it, the Kernel shows a crash log. This Kernel crash is due to the dma_async_device_unregister() call done after deleting the channels, this patch fixes this issue. Signed-off-by:
Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/4aa850c035cf7ee488f1d3fb6dee0e37be0dce0a.1613674948.git.gustavo.pimentel@synopsys.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 16f7ae59 ] Compile-testing these drivers is currently broken. Enabling it causes a couple of build failures though: drivers/pci/controller/pci-thunder-ecam.c:119:30: error: shift count >= width of type [-Werror,-Wshift-count-overflow] drivers/pci/controller/pci-thunder-pem.c:54:2: error: implicit declaration of function 'writeq' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-thunder-pem.c:392:8: error: implicit declaration of function 'acpi_get_rc_resources' [-Werror,-Wimplicit-function-declaration] Fix them with the obvious one-line changes. Link: https://lore.kernel.org/r/20210308152501.2135937-2-arnd@kernel.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by:
Robert Richter <rric@kernel.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 0f6925b3 ] Xuan Zhuo reported that commit 3226b158 ("net: avoid 32 x truesize under-estimation for tiny skbs") brought a ~10% performance drop. The reason for the performance drop was that GRO was forced to chain sk_buff (using skb_shinfo(skb)->frag_list), which uses more memory but also cause packet consumers to go over a lot of overhead handling all the tiny skbs. It turns out that virtio_net page_to_skb() has a wrong strategy : It allocates skbs with GOOD_COPY_LEN (128) bytes in skb->head, then copies 128 bytes from the page, before feeding the packet to GRO stack. This was suboptimal before commit 3226b158 ("net: avoid 32 x truesize under-estimation for tiny skbs") because GRO was using 2 frags per MSS, meaning we were not packing MSS with 100% efficiency. Fix is to pull only the ethernet header in page_to_skb() Then, we change virtio_net_hdr_to_skb() to pull the missing headers, instead of assuming they were already pulled by callers. This fixes the performance regression, but could also allow virtio_net to accept packets with more than 128bytes of headers. Many thanks to Xuan Zhuo for his report, and his tests/help. Fixes: 3226b158 ("net: avoid 32 x truesize under-estimation for tiny skbs") Reported-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://www.spinics.net/lists/netdev/msg731397.html Co-Developed-by:
Eric Dumazet <edumazet@google.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtualization@lists.linux-foundation.org Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Magnus Karlsson authored
[ Upstream commit 11cc2d21 ] In order to set the correct return flags for poll, the xsk code has to check if the Rx queue is empty and if the Tx queue is full. This code was unnecessarily large and complex as it used the functions that are used to update the local state from the global state (xskq_nb_free and xskq_nb_avail). Since we are not doing this nor updating any data dependent on this state, we can simplify the functions. Another benefit from this is that we can also simplify the xskq_nb_free and xskq_nb_avail functions in a later commit. Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/1576759171-28550-3-git-send-email-magnus.karlsson@intel.com Signed-off-by:
-
Josh Poimboeuf authored
[ Upstream commit d6d43a92 ] In the second loop of ingenic_pinconf_set(), it annotates the switch default case as unreachable(). The annotation is technically correct, because that same case would have resulted in an early function return in the previous loop. However, the compiled code is suboptimal. GCC seems to work extra hard to ensure that the unreachable code path triggers undefined behavior. The function would fall through to start executing whatever function happens to be next in the compilation unit. This is problematic because: a) it adds unnecessary 'ensure undefined behavior' logic, and corresponding i-cache footprint; and b) it's less robust -- if a bug were to be introduced, falling through to the next function would be catastrophic. Yet another issue is that, while objtool normally understands unreachable() annotations, there's one special case where it doesn't: when the annotation occurs immediately after a 'ret' instruction. That happens to be the case here because unreachable() is immediately before the return. Remove the unreachable() annotation and replace it with a comment. This simplifies the code generation and changes the unreachable error path to just silently return instead of corrupting execution. This fixes the following objtool warning: drivers/pinctrl/pinctrl-ingenic.o: warning: objtool: ingenic_pinconf_set() falls through to next function ingenic_pinconf_group_set() Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/bc20fdbcb826512cf76b7dfd0972740875931b19.1582212881.git.jpoimboe@redhat.com Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
commit 5ee7d4c7 upstream. gcc-11 complains about a prototype declaration that is different from the function definition: drivers/isdn/capi/kcapi.c:724:44: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=] 724 | u16 capi20_get_manufacturer(u32 contr, u8 *buf) | ~~~~^~~ In file included from drivers/isdn/capi/kcapi.c:13: drivers/isdn/capi/kcapi.h:62:43: note: previously declared as an array ‘u8[64]’ {aka ‘unsigned char[64]’} 62 | u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]); | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/isdn/capi/kcapi.c:790:38: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=] 790 | u16 capi20_get_serial(u32 contr, u8 *serial) | ~~~~^~~~~~ In file included from drivers/isdn/capi/kcapi.c:13: drivers/isdn/capi/kcapi.h:64:37: note: previously declared as an array ‘u8[8]’ {aka ‘unsigned char[8]’} 64 | u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]); | ~~~^~~~~~~~~~~~~~~~~~~~~~~ Change the definition to make them match. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kaixu Xia authored
commit ea8146c6 upstream. Fix the gcc warning: drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c:2673:9: warning: this 'for' clause does not guard... [-Wmisleading-indentation] 2673 | for (i = 0; i < n; ++i) \ Reported-by:
Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by:
Kaixu Xia <kaixuxia@tencent.com> Link: https://lore.kernel.org/r/1604467444-23043-1-git-send-email-kaixuxia@tencent.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 8460f600 upstream. gcc-11 now warns about a confusingly indented code block: drivers/usb/host/sl811-hcd.c: In function ‘sl811h_hub_control’: drivers/usb/host/sl811-hcd.c:1291:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation] 1291 | if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ | ^~ drivers/usb/host/sl811-hcd.c:1295:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’ 1295 | break; Rewrite this to use a single if() block with the __is_defined() macro. Signed-off-by:
-
Arnd Bergmann authored
commit 40cc3a80 upstream. gcc-11 starts warning about misleading indentation inside of macros: drivers/misc/kgdbts.c: In function ‘kgdbts_break_test’: drivers/misc/kgdbts.c:103:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation] 103 | if (verbose > 1) \ | ^~ drivers/misc/kgdbts.c:200:9: note: in expansion of macro ‘v2printk’ 200 | v2printk("kgdbts: breakpoint complete\n"); | ^~~~~~~~ drivers/misc/kgdbts.c:105:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’ 105 | touch_nmi_watchdog(); \ | ^~~~~~~~~~~~~~~~~~ The code looks correct to me, so just reindent it for readability. Fixes: e8d31c20 ("kgdb: add kgdb internal test suite") Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
commit 396a66aa upstream. gcc-11 warns about mismatched prototypes here: arch/x86/lib/msr-smp.c:255:51: error: argument 2 of type ‘u32 *’ {aka ‘unsigned int *’} declared as a pointer [-Werror=array-parameter=] 255 | int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs) | ~~~~~^~~~ arch/x86/include/asm/msr.h:347:50: note: previously declared as an array ‘u32[8]’ {aka ‘unsigned int[8]’} GCC is right here - fix up the types. [ mingo: Twiddled the changelog. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20210322164541.912261-1-arnd@kernel.org Signed-off-by:
-
- 19 May, 2021 16 commits
-
-
Greg Kroah-Hartman authored
Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Jason Self <jason@bluehome.net> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Hulk Robot <hulkrobot@huawei.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210517140242.729269392@linuxfoundation.org Signed-off-by:
-
Kuninori Morimoto authored
commit a4856e15 upstream. commit 66c705d0 ("SoC: rsnd: add interrupt support for SSI BUSIF buffer") adds __rsnd_ssi_interrupt() checks for BUSIF status, but is using "break" at for loop. This means it is not checking all status. Let's check all BUSIF status. Fixes: commit 66c705d0 ("SoC: rsnd: add interrupt support for SSI BUSIF buffer") Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/874kgh1jsw.wl-kuninori.morimoto.gx@renesas.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Christoph Hellwig authored
commit 53fe2a30 upstream. Do not call nvme_configure_apst when the controller is not live, given that nvme_configure_apst will fail due the lack of an admin queue when the controller is being torn down and nvme_set_latency_tolerance is called from dev_pm_qos_hide_latency_tolerance. Fixes: 510a405d ("nvme: fix memory leak for power latency tolerance") Reported-by:
Peng Liu <liupeng17@lenovo.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
-
Paweł Chmiel authored
commit 34138a59 upstream. This clock must be always enabled to allow access to any registers in fsys1 CMU. Until proper solution based on runtime PM is applied (similar to what was done for Exynos5433), mark that clock as critical so it won't be disabled. It was observed on Samsung Galaxy S6 device (based on Exynos7420), where UFS module is probed before pmic used to power that device. In this case defer probe was happening and that clock was disabled by UFS driver, causing whole boot to hang on next CMU access. Fixes: 753195a7 ("clk: samsung: exynos7: Correct CMU_FSYS1 clocks names") Signed-off-by:
Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/linux-clk/20201024154346.9589-1-pawel.mikolaj.chmiel@gmail.com [s.nawrocki: Added comment in the code] Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Jonathon Reinhart authored
commit 2671fa4d upstream. These sysctls point to global variables: - NF_SYSCTL_CT_MAX (&nf_conntrack_max) - NF_SYSCTL_CT_EXPECT_MAX (&nf_ct_expect_max) - NF_SYSCTL_CT_BUCKETS (&nf_conntrack_htable_size_user) Because their data pointers are not updated to point to per-netns structures, they must be marked read-only in a non-init_net ns. Otherwise, changes in any net namespace are reflected in (leaked into) all other net namespaces. This problem has existed since the introduction of net namespaces. The current logic marks them read-only only if the net namespace is owned by an unprivileged user (other than init_user_ns). Commit d0febd81 ("netfilter: conntrack: re-visit sysctls in unprivileged namespaces") "exposes all sysctls even if the namespace is unpriviliged." Since we need to mark them readonly in any case, we can forego the unprivileged user check altogether. Fixes: d0febd81 ("netfilter: conntrack: re-visit sysctls in unprivileged namespaces") Signed-off-by:
Jonathon Reinhart <Jonathon.Reinhart@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit b4104180 upstream. syzbot can trigger the WARN() in init_uevent_argv() which isn't the nicest as the code does properly recover and handle the error. So change the WARN() call to pr_warn() and provide some more information on what the buffer size that was needed. Link: https://lore.kernel.org/r/20201107082206.GA19079@kroah.com Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: linux-kernel@vger.kernel.org Reported-by: syzbot+92340f7b2b4789907fdb@syzkaller.appspotmail.com Signed-off-by:
-
Badhri Jagan Sridharan authored
commit 374157ff upstream. "usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply" introduced a regression for req_out_volt and req_op_curr calculation. req_out_volt should consider the newly calculated max voltage instead of previously accepted max voltage by the port partner. Likewise, req_op_curr should consider the newly calculated max current instead of previously accepted max current by the port partner. Fixes: e3a07202 ("usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply") Reviewed-by:
Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20210415050121.1928298-1-badhri@google.com Signed-off-by:
-
Ard Biesheuvel authored
commit 10fce53c upstream The early ATAGS/DT mapping code uses SECTION_SHIFT to mask low order bits of R2, and decides that no ATAGS/DTB were provided if the resulting value is 0x0. This means that on systems where DRAM starts at 0x0 (such as Raspberry Pi), no explicit mapping of the DT will be created if R2 points into the first 1 MB section of memory. This was not a problem before, because the decompressed kernel is loaded at the base of DRAM and mapped using sections as well, and so as long as the DT is referenced via a virtual address that uses the same translation (the linear map, in this case), things work fine. However, commit 7a1be318 ("9012/1: move device tree mapping out of linear region") changes this, and now the DT is referenced via a virtual address that is disjoint from the linear mapping of DRAM, and so we need the early code to create the DT mapping unconditionally. So let's create the early DT mapping for any value of R2 != 0x0. Reported-by:
"kernelci.org bot" <bot@kernelci.org> Reviewed-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
Ard Biesheuvel authored
commit fc2933c1 upstream Commit 149a3ffe62b9dbc3 ("9012/1: move device tree mapping out of linear region") created a permanent, read-only section mapping of the device tree blob provided by the firmware, and added a set of macros to get the base and size of the virtually mapped FDT based on the physical address. However, while the mapping code uses the SECTION_SIZE macro correctly, the macros use PMD_SIZE instead, which means something entirely different on ARM when using short descriptors, and is therefore not the right quantity to use here. So replace PMD_SIZE with SECTION_SIZE. While at it, change the names of the macro and its parameter to clarify that it returns the virtual address of the start of the FDT, based on the physical address in memory. Tested-by:
Joel Stanley <joel@jms.id.au> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Ard Biesheuvel authored
commit 7a1be318 upstream On ARM, setting up the linear region is tricky, given the constraints around placement and alignment of the memblocks, and how the kernel itself as well as the DT are placed in physical memory. Let's simplify matters a bit, by moving the device tree mapping to the top of the address space, right between the end of the vmalloc region and the start of the the fixmap region, and create a read-only mapping for it that is independent of the size of the linear region, and how it is organized. Since this region was formerly used as a guard region, which will now be populated fully on LPAE builds by this read-only mapping (which will still be able to function as a guard region for stray writes), bump the start of the [underutilized] fixmap region by 512 KB as well, to ensure that there is always a proper guard region here. Doing so still leaves ample room for the fixmap space, even with NR_CPUS set to its maximum value of 32. Tested-by:
Nicolas Pitre <nico@fluxnic.net> Signed-off-by:
-
Ard Biesheuvel authored
commit e9a2f8b5 upstream Before moving the DT mapping out of the linear region, let's prepare for this change by removing all the phys-to-virt translations of the __atags_pointer variable, and perform this translation only once at setup time. Tested-by:
-
Eric Biggers authored
commit 3c031542 upstream. f2fs didn't properly clean up if verity failed to be enabled on a file: - It left verity metadata (pages past EOF) in the page cache, which would be exposed to userspace if the file was later extended. - It didn't truncate the verity metadata at all (either from cache or from disk) if an error occurred while setting the verity bit. Fix these bugs by adding a call to truncate_inode_pages() and ensuring that we truncate the verity metadata (both from cache and from disk) in all error paths. Also rework the code to cleanly separate the success path from the error paths, which makes it much easier to understand. Finally, log a message if f2fs_truncate() fails, since it might otherwise fail silently. Reported-by:
Yunlei He <heyunlei@hihonor.com> Fixes: 95ae251f ("f2fs: add fs-verity support") Cc: <stable@vger.kernel.org> # v5.4+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Lukasz Luba authored
commit fef05776 upstream. The tz->lock must be hold during the looping over the instances in that thermal zone. This lock was missing in the governor code since the beginning, so it's hard to point into a particular commit. CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Lukasz Luba <lukasz.luba@arm.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422153624.6074-2-lukasz.luba@arm.com Signed-off-by:
-
Maciej W. Rozycki authored
commit 25ab14cb upstream. Remove the inline asm with a DIVU instruction from `__div64_32' and use plain C code for the intended DIVMOD calculation instead. GCC is smart enough to know that both the quotient and the remainder are calculated with single DIVU, so with ISAs up to R5 the same instruction is actually produced with overall similar code. For R6 compiled code will work, but separate DIVU and MODU instructions will be produced, which are also interlocked, so scalar implementations will likely not perform as well as older ISAs with their asynchronous MD unit. Likely still faster then the generic algorithm though. This removes a compilation error for R6 however where the original DIVU instruction is not supported anymore and the MDU accumulator registers have been removed and consequently GCC complains as to a constraint it cannot find a register for: In file included from ./include/linux/math.h:5, from ./include/linux/kernel.h:13, from mm/page-writeback.c:15: ./include/linux/math64.h: In function 'div_u64_rem': ./arch/mips/include/asm/div64.h:76:17: error: inconsistent operand constraints in an 'asm' 76 | __asm__("divu $0, %z1, %z2" \ | ^~~~~~~ ./include/asm-generic/div64.h:245:25: note: in expansion of macro '__div64_32' 245 | __rem = __div64_32(&(n), __base); \ | ^~~~~~~~~~ ./include/linux/math64.h:91:22: note: in expansion of macro 'do_div' 91 | *remainder = do_div(dividend, divisor); | ^~~~~~ This has passed correctness verification with test_div64 and reduced the module's average execution time down to 1.0404s from 1.0445s with R3400 @40MHz. The module's MIPS I machine code has also shrunk by 12 bytes or 3 instructions. Signed-off-by:
Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Maciej W. Rozycki authored
commit c1d337d4 upstream. We already check the high part of the divident against zero to avoid the costly DIVU instruction in that case, needed to reduce the high part of the divident, so we may well check against the divisor instead and set the high part of the quotient to zero right away. We need to treat the high part the divident in that case though as the remainder that would be calculated by the DIVU instruction we avoided. This has passed correctness verification with test_div64 and reduced the module's average execution time down to 1.0445s and 0.2619s from 1.0668s and 0.2629s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz. Signed-off-by:
-
Maciej W. Rozycki authored
commit c49f71f6 upstream. Our current MIPS platform `__div64_32' handler is inactive, because it is incorrectly only enabled for 64-bit configurations, for which generic `do_div' code does not call it anyway. The handler is not suitable for being called from there though as it only calculates 32 bits of the quotient under the assumption the 64-bit divident has been suitably reduced. Code for such reduction used to be there, however it has been incorrectly removed with commit c21004cd ("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0."), which should have only updated an obsoleted constraint for an inline asm involving $hi and $lo register outputs, while possibly wiring the original MIPS variant of the `do_div' macro as `__div64_32' handler for the generic `do_div' implementation Correct the handler as follows then: - Revert most of the commit referred, however retaining the current formatting, except for the final two instructions of the inline asm sequence, which the original commit missed. Omit the original 64-bit parts though. - Rename the original `do_div' macro to `__div64_32'. Use the combined `x' constraint referring to the MD accumulator as a whole, replacing the original individual `h' and `l' constraints used for $hi and $lo registers respectively, of which `h' has been obsoleted with GCC 4.4. Update surrounding code accordingly. We have since removed support for GCC versions before 4.9, so no need for a special arrangement here; GCC has supported the `x' constraint since forever anyway, or at least going back to 1991. - Rename the `__base' local variable in `__div64_32' to `__radix' to avoid a conflict with a local variable in `do_div'. - Actually enable this code for 32-bit rather than 64-bit configurations by qualifying it with BITS_PER_LONG being 32 instead of 64. Include <asm/bitsperlong.h> for this macro rather than <linux/types.h> as we don't need anything else. - Finally include <asm-generic/div64.h> last rather than first. This has passed correctness verification with test_div64 and reduced the module's average execution time down to 1.0668s and 0.2629s from 2.1529s and 0.5647s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz. For a reference 64-bit `do_div' code where we have the DDIVU instruction available to do the whole calculation right away averages at 0.0660s for the latter CPU. Fixes: c21004cd ("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.") Reported-by:
Huacai Chen <chenhuacai@kernel.org> Signed-off-by:
-
