- 01 Oct, 2020 40 commits
-
-
Jonathan Bakker authored
[ Upstream commit 05942b8c ] The USB phy takes some time to reset, so make sure we give it to it. The delay length was taken from the 4x12 phy driver. This manifested in issues with the DWC2 driver since commit fe369e18 ("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.") where the endianness check would read the DWC ID as 0 due to the phy still resetting, resulting in the wrong endian mode being chosen. Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/BN6PR04MB06605D52502816E500683553A3D10@BN6PR04MB0660.namprd04.prod.outlook.com Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jonathan Bakker authored
[ Upstream commit 0383024f ] According to the datasheet available at (1), the bottom four bits are always zero and the actual voltage is 1.25x this value in mV. Since the kernel API specifies that voltages should be in uV, it should report 1250x the shifted value. 1) https://datasheets.maximintegrated.com/en/ds/MAX17040-MAX17041.pdf Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 8d9f73c0 ] In lec_arp_clear_vccs() only entry->vcc is freed, but vcc could be installed on entry->recv_vcc too in lec_vcc_added(). This fixes the following memory leak: unreferenced object 0xffff8880d9266b90 (size 16): comm "atm2", pid 425, jiffies 4294907980 (age 23.488s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 6b 6b 6b a5 ............kkk. backtrace: [<(____ptrval____)>] kmem_cache_alloc_trace+0x10e/0x151 [<(____ptrval____)>] lane_ioctl+0x4b3/0x569 [<(____ptrval____)>] do_vcc_ioctl+0x1ea/0x236 [<(____ptrval____)>] svc_ioctl+0x17d/0x198 [<(____ptrval____)>] sock_do_ioctl+0x47/0x12f [<(____ptrval____)>] sock_ioctl+0x2f9/0x322 [<(____ptrval____)>] vfs_ioctl+0x1e/0x2b [<(____ptrval____)>] ksys_ioctl+0x61/0x80 [<(____ptrval____)>] __x64_sys_ioctl+0x16/0x19 [<(____ptrval____)>] do_syscall_64+0x57/0x65 [<(____ptrval____)>] entry_SYSCALL_64_after_hwframe+0x49/0xb3 Cc: Gengming Liu <l.dmxcsnsbh@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 8c149b7d ] The required supplies in bindings were actually not matching implementation making the bindings incorrect and misleading. The Linux kernel driver requires all supplies to be present. Also for wlf,wm8994 uses just DBVDD-supply instead of DBVDDn-supply (n: <1,3>). Reported-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200501133534.6706-1-krzk@kernel.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Will Deacon authored
[ Upstream commit 98448cdf ] We don't need to be quite as strict about mismatched AArch32 support, which is good because the friendly hardware folks have been busy mismatching this to their hearts' content. * We don't care about EL2 or EL3 (there are silly comments concerning the latter, so remove those) * EL1 support is gated by the ARM64_HAS_32BIT_EL1 capability and handled gracefully when a mismatch occurs * EL0 support is gated by the ARM64_HAS_32BIT_EL0 capability and handled gracefully when a mismatch occurs Relax the AArch32 checks to FTR_NONSTRICT. Tested-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20200421142922.18950-8-will@kernel.org Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit ff62255a ] Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200427122415.47416-1-weiyongjun1@huawei.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Ivan Safonov authored
[ Upstream commit 628cbd97 ] skb clones use same data buffer, so tail of one skb is corrupted by beginning of next skb. Signed-off-by:
Ivan Safonov <insafonov@gmail.com> Link: https://lore.kernel.org/r/20200423191404.12028-1-insafonov@gmail.com Signed-off-by:
-
Madhuparna Bhowmik authored
[ Upstream commit 44b8fb6e ] After registering character device the file operation callbacks can be called. The open callback registers interrupt handler. Therefore interrupt handler can execute in parallel with rest of the init function. To avoid such data race initialize telclk_interrupt variable and struct alarm_events before registering character device. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200417153451.1551-1-madhuparnabhowmik10@gmail.com Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit b849dd84 ] While trying to "dd" to the block device for a USB stick, I encountered a hung task warning (blocked for > 120 seconds). I managed to come up with an easy way to reproduce this on my system (where /dev/sdb is the block device for my USB stick) with: while true; do dd if=/dev/zero of=/dev/sdb bs=4M; done With my reproduction here are the relevant bits from the hung task detector: INFO: task udevd:294 blocked for more than 122 seconds. ... udevd D 0 294 1 0x00400008 Call trace: ... mutex_lock_nested+0x40/0x50 __blkdev_get+0x7c/0x3d4 blkdev_get+0x118/0x138 blkdev_open+0x94/0xa8 do_dentry_open+0x268/0x3a0 vfs_open+0x34/0x40 path_openat+0x39c/0xdf4 do_filp_open+0x90/0x10c do_sys_open+0x150/0x3c8 ... ... Showing all locks held in the system: ... 1 lock held by dd/2798: #0: ffffff814ac1a3b8 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x50/0x204 ... dd D 0 2798 2764 0x00400208 Call trace: ... schedule+0x8c/0xbc io_schedule+0x1c/0x40 wait_on_page_bit_common+0x238/0x338 __lock_page+0x5c/0x68 write_cache_pages+0x194/0x500 generic_writepages+0x64/0xa4 blkdev_writepages+0x24/0x30 do_writepages+0x48/0xa8 __filemap_fdatawrite_range+0xac/0xd8 filemap_write_and_wait+0x30/0x84 __blkdev_put+0x88/0x204 blkdev_put+0xc4/0xe4 blkdev_close+0x28/0x38 __fput+0xe0/0x238 ____fput+0x1c/0x28 task_work_run+0xb0/0xe4 do_notify_resume+0xfc0/0x14bc work_pending+0x8/0x14 The problem appears related to the fact that my USB disk is terribly slow and that I have a lot of RAM in my system to cache things. Specifically my writes seem to be happening at ~15 MB/s and I've got ~4 GB of RAM in my system that can be used for buffering. To write 4 GB of buffer to disk thus takes ~4000 MB / ~15 MB/s = ~267 seconds. The 267 second number is a problem because in __blkdev_put() we call sync_blockdev() while holding the bd_mutex. Any other callers who want the bd_mutex will be blocked for the whole time. The problem is made worse because I believe blkdev_put() specifically tells other tasks (namely udev) to go try to access the device at right around the same time we're going to hold the mutex for a long time. Putting some traces around this (after disabling the hung task detector), I could confirm: dd: 437.608600: __blkdev_put() right before sync_blockdev() for sdb udevd: 437.623901: blkdev_open() right before blkdev_get() for sdb dd: 661.468451: __blkdev_put() right after sync_blockdev() for sdb udevd: 663.820426: blkdev_open() right after blkdev_get() for sdb A simple fix for this is to realize that sync_blockdev() works fine if you're not holding the mutex. Also, it's not the end of the world if you sync a little early (though it can have performance impacts). Thus we can make a guess that we're going to need to do the sync and then do it without holding the mutex. We still do one last sync with the mutex but it should be much, much faster. With this, my hung task warnings for my test case are gone. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Steve Rutherford authored
[ Upstream commit 7289fdb5 ] Fixes a NULL pointer dereference, caused by the PIT firing an interrupt before the interrupt table has been initialized. SET_PIT2 can race with the creation of the IRQchip. In particular, if SET_PIT2 is called with a low PIT timer period (after the creation of the IOAPIC, but before the instantiation of the irq routes), the PIT can fire an interrupt at an uninitialized table. Signed-off-by:
Steve Rutherford <srutherford@google.com> Signed-off-by:
Jon Cargille <jcargill@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Message-Id: <20200416191152.259434-1-jcargill@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Raviteja Narayanam authored
[ Upstream commit 42e11948 ] On some platforms, the log is corrupted while console is being registered. It is observed that when set_termios is called, there are still some bytes in the FIFO to be transmitted. So, wait for tx_empty inside cdns_uart_console_setup before calling set_termios. Signed-off-by:
Raviteja Narayanam <raviteja.narayanam@xilinx.com> Reviewed-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/1586413563-29125-2-git-send-email-raviteja.narayanam@xilinx.com Signed-off-by:
-
Nilesh Javali authored
[ Upstream commit b9b97e69 ] The destroy connection ramrod timed out during session logout. Fix the wait delay for graceful vs abortive termination as per the FW requirements. Link: https://lore.kernel.org/r/20200408064332.19377-7-mrangankar@marvell.com Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Jaewon Kim authored
[ Upstream commit 09ef5283 ] On passing requirement to vm_unmapped_area, arch_get_unmapped_area and arch_get_unmapped_area_topdown did not set align_offset. Internally on both unmapped_area and unmapped_area_topdown, if info->align_mask is 0, then info->align_offset was meaningless. But commit df529cab ("mm: mmap: add trace point of vm_unmapped_area") always prints info->align_offset even though it is uninitialized. Fix this uninitialized value issue by setting it to 0 explicitly. Before: vm_unmapped_area: addr=0x755b155000 err=0 total_vm=0x15aaf0 flags=0x1 len=0x109000 lo=0x8000 hi=0x75eed48000 mask=0x0 ofs=0x4022 After: vm_unmapped_area: addr=0x74a4ca1000 err=0 total_vm=0x168ab1 flags=0x1 len=0x9000 lo=0x8000 hi=0x753d94b000 mask=0x0 ofs=0x0 Signed-off-by:
Jaewon Kim <jaewon31.kim@samsung.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 5644e1fb ] pgdat->kswapd_classzone_idx could be accessed concurrently in wakeup_kswapd(). Plain writes and reads without any lock protection result in data races. Fix them by adding a pair of READ|WRITE_ONCE() as well as saving a branch (compilers might well optimize the original code in an unintentional way anyway). While at it, also take care of pgdat->kswapd_order and non-kswapd threads in allow_direct_reclaim(). The data races were reported by KCSAN, BUG: KCSAN: data-race in wakeup_kswapd / wakeup_kswapd write to 0xffff9f427ffff2dc of 4 bytes by task 7454 on cpu 13: wakeup_kswapd+0xf1/0x400 wakeup_kswapd at mm/vmscan.c:3967 wake_all_kswapds+0x59/0xc0 wake_all_kswapds at mm/page_alloc.c:4241 __alloc_pages_slowpath+0xdcc/0x1290 __alloc_pages_slowpath at mm/page_alloc.c:4512 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x16e/0x6f0 __handle_mm_fault+0xcd5/0xd40 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 1 lock held by mtest01/7454: #0: ffff9f425afe8808 (&mm->mmap_sem#2){++++}, at: do_page_fault+0x143/0x6f9 do_user_addr_fault at arch/x86/mm/fault.c:1405 (inlined by) do_page_fault at arch/x86/mm/fault.c:1539 irq event stamp: 6944085 count_memcg_event_mm+0x1a6/0x270 count_memcg_event_mm+0x119/0x270 __do_softirq+0x34c/0x57c irq_exit+0xa2/0xc0 read to 0xffff9f427ffff2dc of 4 bytes by task 7472 on cpu 38: wakeup_kswapd+0xc8/0x400 wake_all_kswapds+0x59/0xc0 __alloc_pages_slowpath+0xdcc/0x1290 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x16e/0x6f0 __handle_mm_fault+0xcd5/0xd40 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 1 lock held by mtest01/7472: #0: ffff9f425a9ac148 (&mm->mmap_sem#2){++++}, at: do_page_fault+0x143/0x6f9 irq event stamp: 6793561 count_memcg_event_mm+0x1a6/0x270 count_memcg_event_mm+0x119/0x270 __do_softirq+0x34c/0x57c irq_exit+0xa2/0xc0 BUG: KCSAN: data-race in kswapd / wakeup_kswapd write to 0xffff90973ffff2dc of 4 bytes by task 820 on cpu 6: kswapd+0x27c/0x8d0 kthread+0x1e0/0x200 ret_from_fork+0x27/0x50 read to 0xffff90973ffff2dc of 4 bytes by task 6299 on cpu 0: wakeup_kswapd+0xf3/0x450 wake_all_kswapds+0x59/0xc0 __alloc_pages_slowpath+0xdcc/0x1290 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x170/0x700 __handle_mm_fault+0xc9f/0xd00 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Xianting Tian authored
[ Upstream commit faffdfa0 ] Mount failure issue happens under the scenario: Application forked dozens of threads to mount the same number of cramfs images separately in docker, but several mounts failed with high probability. Mount failed due to the checking result of the page(read from the superblock of loop dev) is not uptodate after wait_on_page_locked(page) returned in function cramfs_read: wait_on_page_locked(page); if (!PageUptodate(page)) { ... } The reason of the checking result of the page not uptodate: systemd-udevd read the loopX dev before mount, because the status of loopX is Lo_unbound at this time, so loop_make_request directly trigger the calling of io_end handler end_buffer_async_read, which called SetPageError(page). So It caused the page can't be set to uptodate in function end_buffer_async_read: if(page_uptodate && !PageError(page)) { SetPageUptodate(page); } Then mount operation is performed, it used the same page which is just accessed by systemd-udevd above, Because this page is not uptodate, it will launch a actual read via submit_bh, then wait on this page by calling wait_on_page_locked(page). When the I/O of the page done, io_end handler end_buffer_async_read is called, because no one cleared the page error(during the whole read path of mount), which is caused by systemd-udevd reading, so this page is still in "PageError" status, which can't be set to uptodate in function end_buffer_async_read, then caused mount failure. But sometimes mount succeed even through systemd-udeved read loopX dev just before, The reason is systemd-udevd launched other loopX read just between step 3.1 and 3.2, the steps as below: 1, loopX dev default status is Lo_unbound; 2, systemd-udved read loopX dev (page is set to PageError); 3, mount operation 1) set loopX status to Lo_bound; ==>systemd-udevd read loopX dev<== 2) read loopX dev(page has no error) 3) mount succeed As the loopX dev status is set to Lo_bound after step 3.1, so the other loopX dev read by systemd-udevd will go through the whole I/O stack, part of the call trace as below: SYS_read vfs_read do_sync_read blkdev_aio_read generic_file_aio_read do_generic_file_read: ClearPageError(page); mapping->a_ops->readpage(filp, page); here, mapping->a_ops->readpage() is blkdev_readpage. In latest kernel, some function name changed, the call trace as below: blkdev_read_iter generic_file_read_iter generic_file_buffered_read: /* * A previous I/O error may have been due to temporary * failures, eg. mutipath errors. * Pg_error will be set again if readpage fails. */ ClearPageError(page); /* Start the actual read. The read will unlock the page*/ error=mapping->a_ops->readpage(flip, page); We can see ClearPageError(page) is called before the actual read, then the read in step 3.2 succeed. This patch is to add the calling of ClearPageError just before the actual read of read path of cramfs mount. Without the patch, the call trace as below when performing cramfs mount: do_mount cramfs_read cramfs_blkdev_read read_cache_page do_read_cache_page: filler(data, page); or mapping->a_ops->readpage(data, page); With the patch, the call trace as below when performing mount: do_mount cramfs_read cramfs_blkdev_read read_cache_page: do_read_cache_page: ClearPageError(page); <== new add filler(data, page); or mapping->a_ops->readpage(data, page); With the patch, mount operation trigger the calling of ClearPageError(page) before the actual read, the page has no error if no additional page error happen when I/O done. Signed-off-by:
Xianting Tian <xianting_tian@126.com> Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: <yubin@h3c.com> Link: http://lkml.kernel.org/r/1583318844-22971-1-git-send-email-xianting_tian@126.com Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit b0d14fc4 ] Clang warns: mm/kmemleak.c:1955:28: warning: array comparison always evaluates to a constant [-Wtautological-compare] if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata) ^ mm/kmemleak.c:1955:60: warning: array comparison always evaluates to a constant [-Wtautological-compare] if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata) These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr). Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/895 Link: http://lkml.kernel.org/r/20200220051551.44000-1-natechancellor@gmail.com Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 08ca8b21 ] When a subrequest is being detached from the subgroup, we want to ensure that it is not holding the group lock, or in the process of waiting for the group lock. Fixes: 5b2b5187 ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Andreas Steinmetz authored
[ Upstream commit 5c6cd702 ] The Miditech MIDIFACE 16x16 (USB ID 1290:1749) has more than one extra endpoint descriptor. The first extra descriptor is: 0x06 0x30 0x00 0x00 0x00 0x00 As the code in snd_usbmidi_get_ms_info() looks only at the first extra descriptor to find USB_DT_CS_ENDPOINT the device as such is recognized but there is neither input nor output configured. The patch iterates through the extra descriptors to find the proper one. With this patch the device is correctly configured. Signed-off-by:
Andreas Steinmetz <ast@domdv.de> Link: https://lore.kernel.org/r/1c3b431a86f69e1d60745b6110cdb93c299f120b.camel@domdv.de Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Liu Song authored
[ Upstream commit acc5af3e ] In “ubifs_check_node”, when the value of "node_len" is abnormal, the code will goto label of "out_len" for execution. Then, in the following "ubifs_dump_node", if inode type is "UBIFS_DATA_NODE", in "print_hex_dump", an out-of-bounds access may occur due to the wrong "ch->len". Therefore, when the value of "node_len" is abnormal, data length should to be adjusted to a reasonable safe range. At this time, structured data is not credible, so dump the corrupted data directly for analysis. Signed-off-by:
Liu Song <liu.song11@zte.com.cn> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Chuck Lever authored
[ Upstream commit 1a33d8a2 ] Kernel memory leak detected: unreferenced object 0xffff888849cdf480 (size 8): comm "kworker/u8:3", pid 2086, jiffies 4297898756 (age 4269.856s) hex dump (first 8 bytes): 30 00 cd 49 88 88 ff ff 0..I.... backtrace: [<00000000acfc370b>] __kmalloc_track_caller+0x137/0x183 [<00000000a2724354>] kstrdup+0x2b/0x43 [<0000000082964f84>] xprt_rdma_format_addresses+0x114/0x17d [rpcrdma] [<00000000dfa6ed00>] xprt_setup_rdma_bc+0xc0/0x10c [rpcrdma] [<0000000073051a83>] xprt_create_transport+0x3f/0x1a0 [sunrpc] [<0000000053531a8e>] rpc_create+0x118/0x1cd [sunrpc] [<000000003a51b5f8>] setup_callback_client+0x1a5/0x27d [nfsd] [<000000001bd410af>] nfsd4_process_cb_update.isra.7+0x16c/0x1ac [nfsd] [<000000007f4bbd56>] nfsd4_run_cb_work+0x4c/0xbd [nfsd] [<0000000055c5586b>] process_one_work+0x1b2/0x2fe [<00000000b1e3e8ef>] worker_thread+0x1a6/0x25a [<000000005205fb78>] kthread+0xf6/0xfb [<000000006d2dc057>] ret_from_fork+0x3a/0x50 Introduce a call to xprt_rdma_free_addresses() similar to the way that the TCP backchannel releases a transport's peer address strings. Fixes: 5d252f90 ("svcrdma: Add class for RDMA backwards direction transport") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit b25b60d7 ] 'maxlen' is the total size of the destination buffer. There is only one caller and this value is 256. When we compute the size already used and what we would like to add in the buffer, the trailling NULL character is not taken into account. However, this trailling character will be added by the 'strcat' once we have checked that we have enough place. So, there is a off-by-one issue and 1 byte of the stack could be erroneously overwridden. Take into account the trailling NULL, when checking if there is enough place in the destination buffer. While at it, also replace a 'sprintf' by a safer 'snprintf', check for output truncation and avoid a superfluous 'strlen'. Fixes: dc9a16e4 ("svc: Add /proc/sys/sunrpc/transport files") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> [ cel: very minor fix to documenting comment Signed-off-by:
-
Zhu Yanjun authored
[ Upstream commit d0ca2c35 ] The RXE driver doesn't set sys_image_guid and user space applications see zeros. This causes to pyverbs tests to fail with the following traceback, because the IBTA spec requires to have valid sys_image_guid. Traceback (most recent call last): File "./tests/test_device.py", line 51, in test_query_device self.verify_device_attr(attr) File "./tests/test_device.py", line 74, in verify_device_attr assert attr.sys_image_guid != 0 In order to fix it, set sys_image_guid to be equal to node_guid. Before: 5: rxe0: ... node_guid 5054:00ff:feaa:5363 sys_image_guid 0000:0000:0000:0000 After: 5: rxe0: ... node_guid 5054:00ff:feaa:5363 sys_image_guid 5054:00ff:feaa:5363 Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200323112800.1444784-1-leon@kernel.org Signed-off-by:
Zhu Yanjun <yanjunz@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Gabriel Ravier authored
[ Upstream commit d1ee7e1f ] If '-o' was used more than 64 times in a single invocation of gpio-hammer, this could lead to an overflow of the 'lines' array. This commit fixes this by avoiding the overflow and giving a proper diagnostic back to the user Signed-off-by:
Gabriel Ravier <gabravier@gmail.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Pratik Rajesh Sampat authored
[ Upstream commit d95fe371 ] The patch avoids allocating cpufreq_policy on stack hence fixing frame size overflow in 'powernv_cpufreq_work_fn' Fixes: 22794280 ("cpufreq: powernv: Restore cpu frequency to policy->cur on unthrottling") Signed-off-by:
Pratik Rajesh Sampat <psampat@linux.ibm.com> Reviewed-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200316135743.57735-1-psampat@linux.ibm.com Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit d74b181a ] 'snprintf' returns the number of characters which would be generated for the given input. If the returned value is *greater than* or equal to the buffer size, it means that the output has been truncated. Fix the overflow test accordingly. Fixes: 7780c25b ("perf tools: Allow ability to map cpus to nodes easily") Fixes: 92a7e127 ("perf cpumap: Add cpu__max_present_cpu()") Signed-off-by:
David Laight <David.Laight@ACULAB.COM> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: He Zhe <zhe.he@windriver.com> Cc: Jan Stancek <jstancek@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-janitors@vger.kernel.org Link: http://lore.kernel.org/lkml/20200324070319.10901-1-christophe.jaillet@wanadoo.fr Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Vignesh Raghavendra authored
[ Upstream commit 7cf4df30 ] Terminate and flush DMA internal buffers, before pushing RX data to higher layer. Otherwise, this will lead to data corruption, as driver would end up pushing stale buffer data to higher layer while actual data is still stuck inside DMA hardware and has yet not arrived at the memory. While at that, replace deprecated dmaengine_terminate_all() with dmaengine_terminate_async(). Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200319110344.21348-2-vigneshr@ti.com Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 4ce35a36 ] When booting j721e the following bug is printed: [ 1.154821] BUG: sleeping function called from invalid context at kernel/sched/completion.c:99 [ 1.154827] in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 12, name: kworker/0:1 [ 1.154832] 3 locks held by kworker/0:1/12: [ 1.154836] #0: ffff000840030728 ((wq_completion)events){+.+.}, at: process_one_work+0x1d4/0x6e8 [ 1.154852] #1: ffff80001214fdd8 (deferred_probe_work){+.+.}, at: process_one_work+0x1d4/0x6e8 [ 1.154860] #2: ffff00084060b170 (&dev->mutex){....}, at: __device_attach+0x38/0x138 [ 1.154872] irq event stamp: 63096 [ 1.154881] hardirqs last enabled at (63095): [<ffff800010b74318>] _raw_spin_unlock_irqrestore+0x70/0x78 [ 1.154887] hardirqs last disabled at (63096): [<ffff800010b740d8>] _raw_spin_lock_irqsave+0x28/0x80 [ 1.154893] softirqs last enabled at (62254): [<ffff800010080c88>] _stext+0x488/0x564 [ 1.154899] softirqs last disabled at (62247): [<ffff8000100fdb3c>] irq_exit+0x114/0x140 [ 1.154906] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.6.0-rc6-next-20200318-00094-g45e4089b0bd3 #221 [ 1.154911] Hardware name: Texas Instruments K3 J721E SoC (DT) [ 1.154917] Workqueue: events deferred_probe_work_func [ 1.154923] Call trace: [ 1.154928] dump_backtrace+0x0/0x190 [ 1.154933] show_stack+0x14/0x20 [ 1.154940] dump_stack+0xe0/0x148 [ 1.154946] ___might_sleep+0x150/0x1f0 [ 1.154952] __might_sleep+0x4c/0x80 [ 1.154957] wait_for_completion_timeout+0x40/0x140 [ 1.154964] ti_sci_set_device_state+0xa0/0x158 [ 1.154969] ti_sci_cmd_get_device_exclusive+0x14/0x20 [ 1.154977] ti_sci_dev_start+0x34/0x50 [ 1.154984] genpd_runtime_resume+0x78/0x1f8 [ 1.154991] __rpm_callback+0x3c/0x140 [ 1.154996] rpm_callback+0x20/0x80 [ 1.155001] rpm_resume+0x568/0x758 [ 1.155007] __pm_runtime_resume+0x44/0xb0 [ 1.155013] omap8250_probe+0x2b4/0x508 [ 1.155019] platform_drv_probe+0x50/0xa0 [ 1.155023] really_probe+0xd4/0x318 [ 1.155028] driver_probe_device+0x54/0xe8 [ 1.155033] __device_attach_driver+0x80/0xb8 [ 1.155039] bus_for_each_drv+0x74/0xc0 [ 1.155044] __device_attach+0xdc/0x138 [ 1.155049] device_initial_probe+0x10/0x18 [ 1.155053] bus_probe_device+0x98/0xa0 [ 1.155058] deferred_probe_work_func+0x74/0xb0 [ 1.155063] process_one_work+0x280/0x6e8 [ 1.155068] worker_thread+0x48/0x430 [ 1.155073] kthread+0x108/0x138 [ 1.155079] ret_from_fork+0x10/0x18 To fix the bug we need to first call pm_runtime_enable() prior to any pm_runtime calls. Reported-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200320125200.6772-1-peter.ujfalusi@ti.com Signed-off-by:
-
Vignesh Raghavendra authored
[ Upstream commit f19c3f6c ] When port's throttle callback is called, it should stop pushing any more data into TTY buffer to avoid buffer overflow. This means driver has to stop HW from receiving more data and assert the HW flow control. For UARTs with auto HW flow control (such as 8250_omap) manual assertion of flow control line is not possible and only way is to allow RX FIFO to fill up, thus trigger auto HW flow control logic. Therefore make sure that 8250 generic IRQ handler does not drain data when port is stopped (i.e UART_LSR_DR is unset in read_status_mask). Not servicing, RX FIFO would trigger auto HW flow control when FIFO occupancy reaches preset threshold, thus halting RX. Since, error conditions in UART_LSR register are cleared just by reading the register, data has to be drained in case there are FIFO errors, else error information will lost. Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit bf2cbe04 ] Clang warns: ../kernel/trace/trace.c:9335:33: warning: array comparison always evaluates to true [-Wtautological-compare] if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt) ^ 1 warning generated. These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the runtime result of the check (tested with some print statements compiled in with clang + ld.lld and gcc + ld.bfd in QEMU). Link: http://lkml.kernel.org/r/20200220051011.26113-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/893 Suggested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit c11af813 ] The RTC IRQ is requested before the struct rtc_device is allocated, this may lead to a NULL pointer dereference in the IRQ handler. To fix this issue, allocating the rtc_device struct before requesting the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device to register the RTC device. Link: https://lore.kernel.org/r/20200306073404.56921-1-alexandre.belloni@bootlin.com Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Stefan Berger authored
[ Upstream commit d8d74ea3 ] Synchronize with the results from the CRQs before continuing with the initialization. This avoids trying to send TPM commands while the rtce buffer has not been allocated, yet. This patch fixes an existing race condition that may occurr if the hypervisor does not quickly respond to the VTPM_GET_RTCE_BUFFER_SIZE request sent during initialization and therefore the ibmvtpm->rtce_buf has not been allocated at the time the first TPM command is sent. Fixes: 132f7629 ("drivers/char/tpm: Add new device driver to support IBM vTPM") Signed-off-by:
Stefan Berger <stefanb@linux.ibm.com> Acked-by:
Nayna Jain <nayna@linux.ibm.com> Tested-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 1cb5deb5 ] If we decide that a directory free block is corrupt, we must take care not to leak a buffer pointer to the caller. After xfs_trans_brelse returns, the buffer can be freed or reused, which means that we have to set *bpp back to NULL. Callers are supposed to notice the nonzero return value and not use the buffer pointer, but we should code more defensively, even if all current callers handle this situation correctly. Fixes: de14c5f5 ("xfs: verify free block header fields") Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit a7463e2d ] The shifting of buf[3] by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to an unsigned long. In the unlikely event that the the top bit of buf[3] is set then all then all the upper bits end up as also being set because of the sign-extension and this affect the ev->post_bit_error sum. Fix this by using the temporary u32 variable bit_error to avoid the sign-extension promotion. This also removes the need to do the computation twice. Addresses-Coverity: ("Unintended sign extension") Fixes: 267897a4 ("[media] tda10071: implement DVBv5 statistics") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Howard Chung authored
[ Upstream commit 96298f64 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 #32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 #32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 #33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by:
Howard Chung <howardchung@google.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Sagar Biradar authored
[ Upstream commit bef18d30 ] Fixes the occasional adapter panic when sg_reset is issued with -d, -t, -b and -H flags. Removal of command type HBA_IU_TYPE_SCSI_TM_REQ in aac_hba_send since iu_type, request_id and fib_flags are not populated. Device and target reset handlers are made to send TMF commands only when reset_state is 0. Link: https://lore.kernel.org/r/1581553771-25796-1-git-send-email-Sagar.Biradar@microchip.com Reviewed-by:
Sagar Biradar <Sagar.Biradar@microchip.com> Signed-off-by:
Balsundar P <balsundar.p@microsemi.com> Signed-off-by:
-
Wen Gong authored
[ Upstream commit 402f2992 ] When use command to read values, it crashed. command: dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value count=1 bs=4 skip=$((0x100233)) It will call to ath10k_sdio_hif_diag_read with address = 0x4008cc and buf_len = 4. Then system crash: [ 1786.013258] Unable to handle kernel paging request at virtual address ffffffc00bd45000 [ 1786.013273] Mem abort info: [ 1786.013281] ESR = 0x96000045 [ 1786.013291] Exception class = DABT (current EL), IL = 32 bits [ 1786.013299] SET = 0, FnV = 0 [ 1786.013307] EA = 0, S1PTW = 0 [ 1786.013314] Data abort info: [ 1786.013322] ISV = 0, ISS = 0x00000045 [ 1786.013330] CM = 0, WnR = 1 [ 1786.013342] swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000008542a60e [ 1786.013350] [ffffffc00bd45000] pgd=0000000000000000, pud=0000000000000000 [ 1786.013368] Internal error: Oops: 96000045 [#1] PREEMPT SMP [ 1786.013609] Process swapper/0 (pid: 0, stack limit = 0x0000000084b153c6) [ 1786.013623] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.86 #137 [ 1786.013631] Hardware name: MediaTek krane sku176 board (DT) [ 1786.013643] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 1786.013662] pc : __memcpy+0x94/0x180 [ 1786.013678] lr : swiotlb_tbl_unmap_single+0x84/0x150 [ 1786.013686] sp : ffffff8008003c60 [ 1786.013694] x29: ffffff8008003c90 x28: ffffffae96411f80 [ 1786.013708] x27: ffffffae960d2018 x26: ffffff8019a4b9a8 [ 1786.013721] x25: 0000000000000000 x24: 0000000000000001 [ 1786.013734] x23: ffffffae96567000 x22: 00000000000051d4 [ 1786.013747] x21: 0000000000000000 x20: 00000000fe6e9000 [ 1786.013760] x19: 0000000000000004 x18: 0000000000000020 [ 1786.013773] x17: 0000000000000001 x16: 0000000000000000 [ 1786.013787] x15: 00000000ffffffff x14: 00000000000044c0 [ 1786.013800] x13: 0000000000365ba4 x12: 0000000000000000 [ 1786.013813] x11: 0000000000000001 x10: 00000037be6e9000 [ 1786.013826] x9 : ffffffc940000000 x8 : 000000000bd45000 [ 1786.013839] x7 : 0000000000000000 x6 : ffffffc00bd45000 [ 1786.013852] x5 : 0000000000000000 x4 : 0000000000000000 [ 1786.013865] x3 : 0000000000000c00 x2 : 0000000000000004 [ 1786.013878] x1 : fffffff7be6e9004 x0 : ffffffc00bd45000 [ 1786.013891] Call trace: [ 1786.013903] __memcpy+0x94/0x180 [ 1786.013914] unmap_single+0x6c/0x84 [ 1786.013925] swiotlb_unmap_sg_attrs+0x54/0x80 [ 1786.013938] __swiotlb_unmap_sg_attrs+0x8c/0xa4 [ 1786.013952] msdc_unprepare_data+0x6c/0x84 [ 1786.013963] msdc_request_done+0x58/0x84 [ 1786.013974] msdc_data_xfer_done+0x1a0/0x1c8 [ 1786.013985] msdc_irq+0x12c/0x17c [ 1786.013996] __handle_irq_event_percpu+0xe4/0x250 [ 1786.014006] handle_irq_event_percpu+0x28/0x68 [ 1786.014015] handle_irq_event+0x48/0x78 [ 1786.014026] handle_fasteoi_irq+0xd0/0x1a0 [ 1786.014039] __handle_domain_irq+0x84/0xc4 [ 1786.014050] gic_handle_irq+0x124/0x1a4 [ 1786.014059] el1_irq+0xb0/0x128 [ 1786.014072] cpuidle_enter_state+0x298/0x328 [ 1786.014082] cpuidle_enter+0x30/0x40 [ 1786.014094] do_idle+0x190/0x268 [ 1786.014104] cpu_startup_entry+0x24/0x28 [ 1786.014116] rest_init+0xd4/0xe0 [ 1786.014126] start_kernel+0x30c/0x38c [ 1786.014139] Code: f8408423 f80084c3 36100062 b8404423 (b80044c3) [ 1786.014150] ---[ end trace 3b02ddb698ea69ee ]--- [ 1786.015415] Kernel panic - not syncing: Fatal exception in interrupt [ 1786.015433] SMP: stopping secondary CPUs [ 1786.015447] Kernel Offset: 0x2e8d200000 from 0xffffff8008000000 [ 1786.015458] CPU features: 0x0,2188200c [ 1786.015466] Memory Limit: none For sdio chip, it need the memory which is kmalloc, if it is vmalloc from ath10k_mem_value_read, then it have a memory error. kzalloc of ath10k_sdio_hif_diag_read32 is the correct type, so add kzalloc in ath10k_sdio_hif_diag_read to replace the buffer which is vmalloc from ath10k_mem_value_read. This patch only effect sdio chip. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by:
Wen Gong <wgong@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
John Clements authored
[ Upstream commit 1b3460a8 ] mitigates race condition on BACO reset between GPU bootcode and driver reload Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
John Clements <john.clements@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Kirill A. Shutemov authored
[ Upstream commit c3e5ea6e ] Jeff Moyer has reported that one of xfstests triggers a warning when run on DAX-enabled filesystem: WARNING: CPU: 76 PID: 51024 at mm/memory.c:2317 wp_page_copy+0xc40/0xd50 ... wp_page_copy+0x98c/0xd50 (unreliable) do_wp_page+0xd8/0xad0 __handle_mm_fault+0x748/0x1b90 handle_mm_fault+0x120/0x1f0 __do_page_fault+0x240/0xd70 do_page_fault+0x38/0xd0 handle_page_fault+0x10/0x30 The warning happens on failed __copy_from_user_inatomic() which tries to copy data into a CoW page. This happens because of race between MADV_DONTNEED and CoW page fault: CPU0 CPU1 handle_mm_fault() do_wp_page() wp_page_copy() do_wp_page() madvise(MADV_DONTNEED) zap_page_range() zap_pte_range() ptep_get_and_clear_full() <TLB flush> __copy_from_user_inatomic() sees empty PTE and fails WARN_ON_ONCE(1) clear_page() The solution is to re-try __copy_from_user_inatomic() under PTL after checking that PTE is matches the orig_pte. The second copy attempt can still fail, like due to non-readable PTE, but there's nothing reasonable we can do about, except clearing the CoW page. Reported-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by:
-
Qiujun Huang authored
[ Upstream commit dce8e237 ] KCSAN find inode->i_disksize could be accessed concurrently. BUG: KCSAN: data-race in ext4_mark_iloc_dirty / ext4_write_end write (marked) to 0xffff8b8932f40090 of 8 bytes by task 66792 on cpu 0: ext4_write_end+0x53f/0x5b0 ext4_da_write_end+0x237/0x510 generic_perform_write+0x1c4/0x2a0 ext4_buffered_write_iter+0x13a/0x210 ext4_file_write_iter+0xe2/0x9b0 new_sync_write+0x29c/0x3a0 __vfs_write+0x92/0xa0 vfs_write+0xfc/0x2a0 ksys_write+0xe8/0x140 __x64_sys_write+0x4c/0x60 do_syscall_64+0x8a/0x2a0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff8b8932f40090 of 8 bytes by task 14414 on cpu 1: ext4_mark_iloc_dirty+0x716/0x1190 ext4_mark_inode_dirty+0xc9/0x360 ext4_convert_unwritten_extents+0x1bc/0x2a0 ext4_convert_unwritten_io_end_vec+0xc5/0x150 ext4_put_io_end+0x82/0x130 ext4_writepages+0xae7/0x16f0 do_writepages+0x64/0x120 __writeback_single_inode+0x7d/0x650 writeback_sb_inodes+0x3a4/0x860 __writeback_inodes_wb+0xc4/0x150 wb_writeback+0x43f/0x510 wb_workfn+0x3b2/0x8a0 process_one_work+0x39b/0x7e0 worker_thread+0x88/0x650 kthread+0x1d4/0x1f0 ret_from_fork+0x35/0x40 The plain read is outside of inode->i_data_sem critical section which results in a data race. Fix it by adding READ_ONCE(). Signed-off-by:
Qiujun Huang <hqjagain@gmail.com> Link: https://lore.kernel.org/r/1582556566-3909-1-git-send-email-hqjagain@gmail.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 4cbbc3a0 ] While unlikely the divisor in scale64_check_overflow() could be >= 32bit in scale64_check_overflow(). do_div() truncates the divisor to 32bit at least on 32bit platforms. Use div64_u64() instead to avoid the truncation to 32-bit. [ tglx: Massaged changelog ] Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200120100523.45656-1-wenyang@linux.alibaba.com Signed-off-by:
-
