- 16 May, 2019 40 commits
-
-
Greg Kroah-Hartman authored
-
Guenter Roeck authored
The backport of commit 0336e04a ("s390/speculation: Support 'mitigations=' cmdline option") introduces a build error. Fix it up. Fixes: 91788fcb ("s390/speculation: Support 'mitigations=' cmdline option") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
commit 5266e58d upstream. Set RI in the default kernel's MSR so that the architected way of detecting unrecoverable machine check interrupts has a chance to work. This is inline with the MSR setup of the rest of booke powerpc architectures configured here. Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: stable@vger.kernel.org Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Russell Currey authored
commit a3f3072d upstream. Without restoring the IAMR after idle, execution prevention on POWER9 with Radix MMU is overwritten and the kernel can freely execute userspace without faulting. This is necessary when returning from any stop state that modifies user state, as well as hypervisor state. To test how this fails without this patch, load the lkdtm driver and do the following: $ echo EXEC_USERSPACE > /sys/kernel/debug/provoke-crash/DIRECT which won't fault, then boot the kernel with powersave=off, where it will fault. Applying this patch will fix this. Fixes: 3b10d009 ("powerpc/mm/radix: Prevent kernel execution of user space") Cc: stable@vger.kernel.org # v4.10+ Signed-off-by:
Russell Currey <ruscur@russell.cc> Reviewed-by:
Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit 6a024330 upstream. The "param.count" value is a u64 thatcomes from the user. The code later in the function assumes that param.count is at least one and if it's not then it leads to an Oops when we dereference the ZERO_SIZE_PTR. Also the addition can have an integer overflow which would lead us to allocate a smaller "pages" array than required. I can't immediately tell what the possible run times implications are, but it's safest to prevent the overflow. Link: http://lkml.kernel.org/r/20181218082129.GE32567@kadam Fixes: 6db71994 ("drivers/virt: introduce Freescale hypervisor management driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Timur Tabi <timur@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Carpenter authored
commit c8ea3663 upstream. strndup_user() returns error pointers on error, and then in the error handling we pass the error pointers to kfree(). It will cause an Oops. Link: http://lkml.kernel.org/r/20181218082003.GD32567@kadam Fixes: 6db71994 ("drivers/virt: introduce Freescale hypervisor management driver") Signed-off-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit ff946833 ] commit 517d7c79 ("tipc: fix hanging poll() for stream sockets") introduced a regression for clients using non-blocking sockets. After the commit, we send EPOLLOUT event to the client even in TIPC_CONNECTING state. This causes the subsequent send() to fail with ENOTCONN, as the socket is still not in TIPC_ESTABLISHED state. In this commit, we: - improve the fix for hanging poll() by replacing sk_data_ready() with sk_state_change() to wake up all clients. - revert the faulty updates introduced by commit 517d7c79 ("tipc: fix hanging poll() for stream sockets"). Fixes: 517d7c79 ("tipc: fix hanging poll() for stream sockets") Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.se> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Stephen Suryaputra authored
[ Upstream commit ff6ab32b ] VRF netdev mtu isn't typically set and have an mtu of 65536. When the link of a tunnel is set, the tunnel mtu is changed from 1480 to the link mtu minus tunnel header. In the case of VRF netdev is the link, then the tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in this case. Signed-off-by:
Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 873017af ] With NET_ADMIN enabled in container, a normal user could be mapped to root and is able to change the real device's rx filter via ioctl on vlan, which would affect the other ptp process on host. Fix it by disabling SIOCSHWTSTAMP in container. Fixes: a6111d3c ("vlan: Pass SIOC[SG]HWTSTAMP ioctls to real device") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 36096f2f ] kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1 CPU: 0 PID: 12914 Comm: rmmod Tainted: G W 5.1.0+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_del_entry_valid+0x53/0x90 Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48 89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2 RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000 FS: 00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0 Call Trace: unregister_pernet_operations+0x34/0x120 unregister_pernet_subsys+0x1c/0x30 packet_exit+0x1c/0x369 [af_packet __x64_sys_delete_module+0x156/0x260 ? lockdep_hardirqs_on+0x133/0x1b0 ? do_syscall_64+0x12/0x1f0 do_syscall_64+0x6e/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe When modprobe af_packet, register_pernet_subsys fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit ee0df193 ] When changing the number of buffers in the RX ring while the interface is running, the following Oops is encountered due to the new number of buffers being taken into account immediately while their allocation is done when opening the device only. [ 69.882706] Unable to handle kernel paging request for data at address 0xf0000100 [ 69.890172] Faulting instruction address: 0xc033e164 [ 69.895122] Oops: Kernel access of bad area, sig: 11 [#1] [ 69.900494] BE PREEMPT CMPCPRO [ 69.907120] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.115-00006-g179ade8ce3-dirty #269 [ 69.915956] task: c0684310 task.stack: c06da000 [ 69.920470] NIP: c033e164 LR: c02e44d0 CTR: c02e41fc [ 69.925504] REGS: dfff1e20 TRAP: 0300 Not tainted (4.14.115-00006-g179ade8ce3-dirty) [ 69.934161] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 22004428 XER: 20000000 [ 69.940869] DAR: f0000100 DSISR: 20000000 [ 69.940869] GPR00: c0352d70 dfff1ed0 c0684310 f00000a4 00000040 dfff1f68 00000000 0000001f [ 69.940869] GPR08: df53f410 1cc00040 00000021 c0781640 42004424 100c82b6 f00000a4 df53f5b0 [ 69.940869] GPR16: df53f6c0 c05daf84 00000040 00000000 00000040 c0782be4 00000000 00000001 [ 69.940869] GPR24: 00000000 df53f400 000001b0 df53f410 df53f000 0000003f df708220 1cc00044 [ 69.978348] NIP [c033e164] skb_put+0x0/0x5c [ 69.982528] LR [c02e44d0] ucc_geth_poll+0x2d4/0x3f8 [ 69.987384] Call Trace: [ 69.989830] [dfff1ed0] [c02e4554] ucc_geth_poll+0x358/0x3f8 (unreliable) [ 69.996522] [dfff1f20] [c0352d70] net_rx_action+0x248/0x30c [ 70.002099] [dfff1f80] [c04e93e4] __do_softirq+0xfc/0x310 [ 70.007492] [dfff1fe0] [c0021124] irq_exit+0xd0/0xd4 [ 70.012458] [dfff1ff0] [c000e7e0] call_do_irq+0x24/0x3c [ 70.017683] [c06dbe80] [c0006bac] do_IRQ+0x64/0xc4 [ 70.022474] [c06dbea0] [c001097c] ret_from_except+0x0/0x14 [ 70.027964] --- interrupt: 501 at rcu_idle_exit+0x84/0x90 [ 70.027964] LR = rcu_idle_exit+0x74/0x90 [ 70.037585] [c06dbf60] [20000000] 0x20000000 (unreliable) [ 70.042984] [c06dbf80] [c004bb0c] do_idle+0xb4/0x11c [ 70.047945] [c06dbfa0] [c004bd14] cpu_startup_entry+0x18/0x1c [ 70.053682] [c06dbfb0] [c05fb034] start_kernel+0x370/0x384 [ 70.059153] [c06dbff0] [00003438] 0x3438 [ 70.063062] Instruction dump: [ 70.066023] 38a00000 38800000 90010014 4bfff015 80010014 7c0803a6 3123ffff 7c691910 [ 70.073767] 38210010 4e800020 38600000 4e800020 <80e3005c> 80c30098 3107ffff 7d083910 [ 70.081690] ---[ end trace be7ccd9c1e1a9f12 ]--- This patch forbids the modification of the number of buffers in the ring while the interface is running. Fixes: ac421852 ("ucc_geth: add ethtool support") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit 5afcd14c ] The old MIPS implementation of dma_cache_sync() didn't use the dev argument, but commit c9eb6172 ("dma-mapping: turn dma_cache_sync into a dma_map_ops method") changed that, so we now need to set dev.parent. Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
-
Corentin Labbe authored
[ Upstream commit d4c26eb6 ] When adding more MAC addresses to a dwmac-sun8i interface, the device goes directly in promiscuous mode. This is due to IFF_UNICAST_FLT missing flag. So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT. Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i") Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 68be9302 ] BUG: unable to handle kernel paging request at ffffffffa01c5430 PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ #33 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:raw_notifier_chain_register+0x16/0x40 Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08 RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282 RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068 RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700 R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78 FS: 00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0 Call Trace: register_netdevice_notifier+0x43/0x250 ? 0xffffffffa01e0000 dsa_slave_register_notifier+0x13/0x70 [dsa_core ? 0xffffffffa01e0000 dsa_init_module+0x2e/0x1000 [dsa_core do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cleanup allocated resourses if there are errors, otherwise it will trgger memleak. Fixes: c9eb3e0f ("net: dsa: Add support for learning FDB through notification") Signed-off-by:
Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David Ahern authored
[ Upstream commit 19e4e768 ] inet_iif should be used for the raw socket lookup. inet_iif considers rt_iif which handles the case of local traffic. As it stands, ping to a local address with the '-I <dev>' option fails ever since ping was changed to use SO_BINDTODEVICE instead of cmsg + IP_PKTINFO. IPv6 works fine. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit e9919a24 ] With commit 153380ec ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule") we now able to check if a rule already exists. But this only works with iproute2. For other tools like libnl, NetworkManager, it still could add duplicate rules with only NLM_F_CREATE flag, like [localhost ~ ]# ip rule 0: from all lookup local 32766: from all lookup main 32767: from all lookup default 100000: from 192.168.7.5 lookup 5 100000: from 192.168.7.5 lookup 5 As it doesn't make sense to create two duplicate rules, let's just return 0 if the rule exists. Fixes: 153380ec ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule") Reported-by:
Thomas Haller <thaller@redhat.com> Signed-off-by:
-
Laurentiu Tudor authored
[ Upstream commit 17170e65 ] Fix issue with the entry indexing in the sg frame cleanup code being off-by-1. This problem showed up when doing some basic iperf tests and manifested in traffic coming to a halt. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Tobin C. Harding authored
[ Upstream commit bdfad5ae ] Currently error return from kobject_init_and_add() is not followed by a call to kobject_put(). This means there is a memory leak. We currently set p to NULL so that kfree() may be called on it as a noop, the code is arguably clearer if we move the kfree() up closer to where it is called (instead of after goto jump). Remove a goto label 'err1' and jump to call to kobject_put() in error return from kobject_init_and_add() fixing the memory leak. Re-name goto label 'put_back' to 'err1' now that we don't use err1, following current nomenclature (err1, err2 ...). Move call to kfree out of the error code at bottom of function up to closer to where memory was allocated. Add comment to clarify call to kfree(). Signed-off-by:
Tobin C. Harding <tobin@kernel.org> Signed-off-by:
-
Jarod Wilson authored
[ Upstream commit a9b8a2b3 ] There's currently a problem with toggling arp_validate on and off with an active-backup bond. At the moment, you can start up a bond, like so: modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1 ip link set bond0 down echo "ens4f0" > /sys/class/net/bond0/bonding/slaves echo "ens4f1" > /sys/class/net/bond0/bonding/slaves ip link set bond0 up ip addr add 192.168.1.2/24 dev bond0 Pings to 192.168.1.1 work just fine. Now turn on arp_validate: echo 1 > /sys/class/net/bond0/bonding/arp_validate Pings to 192.168.1.1 continue to work just fine. Now when you go to turn arp_validate off again, the link falls flat on it's face: echo 0 > /sys/class/net/bond0/bonding/arp_validate dmesg ... [133191.911987] bond0: Setting arp_validate to none (0) [133194.257793] bond0: bond_should_notify_peers: slave ens4f0 [133194.258031] bond0: link status definitely down for interface ens4f0, disabling it [133194.259000] bond0: making interface ens4f1 the new active one [133197.330130] bond0: link status definitely down for interface ens4f1, disabling it [133197.331191] bond0: now running without any active interface! The problem lies in bond_options.c, where passing in arp_validate=0 results in bond->recv_probe getting set to NULL. This flies directly in the face of commit 3fe68df9, which says we need to set recv_probe = bond_arp_recv, even if we're not using arp_validate. Said commit fixed this in bond_option_arp_interval_set, but missed that we can get to that same state in bond_option_arp_validate_set as well. One solution would be to universally set recv_probe = bond_arp_recv here as well, but I don't think bond_option_arp_validate_set has any business touching recv_probe at all, and that should be left to the arp_interval code, so we can just make things much tidier here. Fixes: 3fe68df9 ("bonding: always set recv_probe to bond_arp_rcv in arp monitor") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Breno Leitao authored
commit 42e2acde upstream. Current powerpc security.c file is defining functions, as cpu_show_meltdown(), cpu_show_spectre_v{1,2} and others, that are being declared at linux/cpu.h header without including the header file that contains these declarations. This is being reported by sparse, which thinks that these functions are static, due to the lack of declaration: arch/powerpc/kernel/security.c:105:9: warning: symbol 'cpu_show_meltdown' was not declared. Should it be static? arch/powerpc/kernel/security.c:139:9: warning: symbol 'cpu_show_spectre_v1' was not declared. Should it be static? arch/powerpc/kernel/security.c:161:9: warning: symbol 'cpu_show_spectre_v2' was not declared. Should it be static? arch/powerpc/kernel/security.c:209:6: warning: symbol 'stf_barrier' was not declared. Should it be static? arch/powerpc/kernel/security.c:289:9: warning: symbol 'cpu_show_spec_store_bypass' was not declared. Should it be static? This patch simply includes the proper header (linux/cpu.h) to match function definition and declaration. Signed-off-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
-
Nigel Croxon authored
commit 4f4fd7c5 upstream. Changing state from check_state_check_result to check_state_compute_result not only is unsafe but also doesn't appear to serve a valid purpose. A raid6 check should only be pushing out extra writes if doing repair and a mis-match occurs. The stripe dev management will already try and do repair writes for failing sectors. This patch makes the raid6 check_state_check_result handling work more like raid5's. If somehow too many failures for a check, just quit the check operation for the stripe. When any checks pass, don't try and use check_state_compute_result for a purpose it isn't needed for and is unsafe for. Just mark the stripe as in sync for passing its parity checks and let the stripe dev read/write code and the bad blocks list do their job handling I/O errors. Repro steps from Xiao: These are the steps to reproduce this problem: 1. redefined OPT_MEDIUM_ERR_ADDR to 12000 in scsi_debug.c 2. insmod scsi_debug.ko dev_size_mb=11000 max_luns=1 num_tgts=1 3. mdadm --create /dev/md127 --level=6 --raid-devices=5 /dev/sde1 /dev/sde2 /dev/sde3 /dev/sde5 /dev/sde6 sde is the disk created by scsi_debug 4. echo "2" >/sys/module/scsi_debug/parameters/opts 5. raid-check It panic: [ 4854.730899] md: data-check of RAID array md127 [ 4854.857455] sd 5:0:0:0: [sdr] tag#80 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.859246] sd 5:0:0:0: [sdr] tag#80 Sense Key : Medium Error [current] [ 4854.860694] sd 5:0:0:0: [sdr] tag#80 Add. Sense: Unrecovered read error [ 4854.862207] sd 5:0:0:0: [sdr] tag#80 CDB: Read(10) 28 00 00 00 2d 88 00 04 00 00 [ 4854.864196] print_req_error: critical medium error, dev sdr, sector 11656 flags 0 [ 4854.867409] sd 5:0:0:0: [sdr] tag#100 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.869469] sd 5:0:0:0: [sdr] tag#100 Sense Key : Medium Error [current] [ 4854.871206] sd 5:0:0:0: [sdr] tag#100 Add. Sense: Unrecovered read error [ 4854.872858] sd 5:0:0:0: [sdr] tag#100 CDB: Read(10) 28 00 00 00 2e e0 00 00 08 00 [ 4854.874587] print_req_error: critical medium error, dev sdr, sector 12000 flags 4000 [ 4854.876456] sd 5:0:0:0: [sdr] tag#101 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.878552] sd 5:0:0:0: [sdr] tag#101 Sense Key : Medium Error [current] [ 4854.880278] sd 5:0:0:0: [sdr] tag#101 Add. Sense: Unrecovered read error [ 4854.881846] sd 5:0:0:0: [sdr] tag#101 CDB: Read(10) 28 00 00 00 2e e8 00 00 08 00 [ 4854.883691] print_req_error: critical medium error, dev sdr, sector 12008 flags 4000 [ 4854.893927] sd 5:0:0:0: [sdr] tag#166 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.896002] sd 5:0:0:0: [sdr] tag#166 Sense Key : Medium Error [current] [ 4854.897561] sd 5:0:0:0: [sdr] tag#166 Add. Sense: Unrecovered read error [ 4854.899110] sd 5:0:0:0: [sdr] tag#166 CDB: Read(10) 28 00 00 00 2e e0 00 00 10 00 [ 4854.900989] print_req_error: critical medium error, dev sdr, sector 12000 flags 0 [ 4854.902757] md/raid:md127: read error NOT corrected!! (sector 9952 on sdr1). [ 4854.904375] md/raid:md127: read error NOT corrected!! (sector 9960 on sdr1). [ 4854.906201] ------------[ cut here ]------------ [ 4854.907341] kernel BUG at drivers/md/raid5.c:4190! raid5.c:4190 above is this BUG_ON: handle_parity_checks6() ... BUG_ON(s->uptodate < disks - 1); /* We don't need Q to recover */ Cc: <stable@vger.kernel.org> # v3.16+ OriginalAuthor: David Jeffery <djeffery@redhat.com> Cc: Xiao Ni <xni@redhat.com> Tested-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
Nigel Croxon <ncroxon@redhat.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 84242b82 upstream. Add missing break statement in order to prevent the code from falling through to case 0x1025, and erroneously setting rtlhal->oem_id to RT_CID_819X_ACER when rtlefuse->eeprom_svid is equal to 0x10EC and none of the cases in switch (rtlefuse->eeprom_smid) match. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: 238ad2dd ("rtlwifi: rtl8723ae: Clean up the hardware info routine") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Petr Štetiar authored
commit 6b583201 upstream. It was reported on OpenWrt bug tracking system[1], that several users are affected by the endless reboot of their routers if they configure 5GHz interface with channel 44 or 48. The reboot loop is caused by the following excessive number of WARN_ON messages: WARNING: CPU: 0 PID: 0 at backports-4.19.23-1/net/mac80211/rx.c:4516 ieee80211_rx_napi+0x1fc/0xa54 [mac80211] as the messages are being correctly emitted by the following guard: case RX_ENC_LEGACY: if (WARN_ON(status->rate_idx >= sband->n_bitrates)) as the rate_idx is in this case erroneously set to 251 (0xfb). This fix simply converts previously used magic number to proper constant and guards against substraction which is leading to the currently observed underflow. 1. https://bugs.openwrt.org/index.php?do=details&task_id=2218 Fixes: 85478344 ("mwl8k: properly set receive status rate index on 5 GHz receive") Cc: <stable@vger.kernel.org> Tested-by:
Eubert Bao <bunnier@gmail.com> Reported-by:
Petr Štetiar <ynezz@true.cz> Signed-off-by:
-
Wei Yongjun authored
commit 51c8d241 upstream. Add the missing unlock before return from function cw1200_hw_scan() in the error handling case. Fixes: 4f68ef64 ("cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit b191fa96 ] Avoid kretprobe recursion loop bg by setting a dummy kprobes to current_kprobe per-CPU variable. This bug has been introduced with the asm-coded trampoline code, since previously it used another kprobe for hooking the function return placeholder (which only has a nop) and trampoline handler was called from that kprobe. This revives the old lost kprobe again. With this fix, we don't see deadlock anymore. And you can see that all inner-called kretprobe are skipped. event_1 235 0 event_2 19375 19612 The 1st column is recorded count and the 2nd is missed count. Above shows (event_1 rec) + (event_2 rec) ~= (event_2 missed) (some difference are here because the counter is racy) Reported-by:
Andrea Righi <righi.andrea@gmail.com> Tested-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: c9becf58 ("[PATCH] kretprobe: kretprobe-booster") Link: http://lkml.kernel.org/r/155094064889.6137.972160690963039.stgit@devbox Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com>
-
Dan Carpenter authored
[ Upstream commit 6491d698 ] This is similar to commit e285d5bf ("NFC: Fix the number of pipes") where we changed NFC_HCI_MAX_PIPES from 127 to 128. As the comment next to the define explains, the pipe identifier is 7 bits long. The highest possible pipe is 127, but the number of possible pipes is 128. As the code is now, then there is potential for an out of bounds array access: net/nfc/nci/hci.c:297 nci_hci_cmd_received() warn: array off by one? 'ndev->hci_dev->pipes[pipe]' '0-127 == 127' Fixes: 11f54f22 ("NFC: nci: Add HCI over NCI protocol support") Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit d7ee81ad ] This is similar to commit 674d9de0 ("NFC: Fix possible memory corruption when handling SHDLC I-Frame commands"). I'm not totally sure, but I think that commit description may have overstated the danger. I was under the impression that this data came from the firmware? If you can't trust your networking firmware, then you're already in trouble. Anyway, these days we add bounds checking where ever we can and we call it kernel hardening. Better safe than sorry. Fixes: 11f54f22 ("NFC: nci: Add HCI over NCI protocol support") Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit b442fed1 ] The workqueue is used to periodically update the networking stack about activity / statistics of various objects such as neighbours and TC actions. It should not be called as part of memory reclaim path, so remove the WQ_MEM_RECLAIM flag. Fixes: 3d5479e9 ("mlxsw: core: Remove deprecated create_workqueue") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 4af06997 ] The ordered workqueue is used to offload various objects such as routes and neighbours in the order they are notified. It should not be called as part of memory reclaim path, so remove the WQ_MEM_RECLAIM flag. This can also result in a warning [1], if a worker tries to flush a non-WQ_MEM_RECLAIM workqueue. [1] [97703.542861] workqueue: WQ_MEM_RECLAIM mlxsw_core_ordered:mlxsw_sp_router_fib6_event_work [mlxsw_spectrum] is flushing !WQ_MEM_RECLAIM events:rht_deferred_worker [97703.542884] WARNING: CPU: 1 PID: 32492 at kernel/workqueue.c:2605 check_flush_dependency+0xb5/0x130 ... [97703.542988] Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 [97703.543049] Workqueue: mlxsw_core_ordered mlxsw_sp_router_fib6_event_work [mlxsw_spectrum] [97703.543061] RIP: 0010:check_flush_dependency+0xb5/0x130 ... [97703.543071] RSP: 0018:ffffb3f08137bc00 EFLAGS: 00010086 [97703.543076] RAX: 0000000000000000 RBX: ffff96e07740ae00 RCX: 0000000000000000 [97703.543080] RDX: 0000000000000094 RSI: ffffffff82dc1934 RDI: 0000000000000046 [97703.543084] RBP: ffffb3f08137bc20 R08: ffffffff82dc18a0 R09: 00000000000225c0 [97703.543087] R10: 0000000000000000 R11: 0000000000007eec R12: ffffffff816e4ee0 [97703.543091] R13: ffff96e06f6a5c00 R14: ffff96e077ba7700 R15: ffffffff812ab0c0 [97703.543097] FS: 0000000000000000(0000) GS:ffff96e077a80000(0000) knlGS:0000000000000000 [97703.543101] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [97703.543104] CR2: 00007f8cd135b280 CR3: 00000001e860e003 CR4: 00000000003606e0 [97703.543109] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [97703.543112] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [97703.543115] Call Trace: [97703.543129] __flush_work+0xbd/0x1e0 [97703.543137] ? __cancel_work_timer+0x136/0x1b0 [97703.543145] ? pwq_dec_nr_in_flight+0x49/0xa0 [97703.543154] __cancel_work_timer+0x136/0x1b0 [97703.543175] ? mlxsw_reg_trans_bulk_wait+0x145/0x400 [mlxsw_core] [97703.543184] cancel_work_sync+0x10/0x20 [97703.543191] rhashtable_free_and_destroy+0x23/0x140 [97703.543198] rhashtable_destroy+0xd/0x10 [97703.543254] mlxsw_sp_fib_destroy+0xb1/0xf0 [mlxsw_spectrum] [97703.543310] mlxsw_sp_vr_put+0xa8/0xc0 [mlxsw_spectrum] [97703.543364] mlxsw_sp_fib_node_put+0xbf/0x140 [mlxsw_spectrum] [97703.543418] ? mlxsw_sp_fib6_entry_destroy+0xe8/0x110 [mlxsw_spectrum] [97703.543475] mlxsw_sp_router_fib6_event_work+0x6cd/0x7f0 [mlxsw_spectrum] [97703.543484] process_one_work+0x1fd/0x400 [97703.543493] worker_thread+0x34/0x410 [97703.543500] kthread+0x121/0x140 [97703.543507] ? process_one_work+0x400/0x400 [97703.543512] ? kthread_park+0x90/0x90 [97703.543523] ret_from_fork+0x35/0x40 Fixes: a3832b31 ("mlxsw: core: Create an ordered workqueue for FIB offload") Signed-off-by:
Semion Lisyansky <semionl@mellanox.com> Acked-by:
-
Ido Schimmel authored
[ Upstream commit a8c133b0 ] The EMAD workqueue is used to handle retransmission of EMAD packets that contain configuration data for the device's firmware. Given the workers need to allocate these packets and that the code is not called as part of memory reclaim path, remove the WQ_MEM_RECLAIM flag. Fixes: d965465b ("mlxsw: core: Fix possible deadlock") Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit d4d0e409 ] The driver cannot guarantee in the prepare phase that it will be able to write an MDB entry to the device. In case the driver returned success during the prepare phase, but then failed to add the entry in the commit phase, a WARNING [1] will be generated by the switchdev core. Fix this by doing the work in the prepare phase instead. [1] [ 358.544486] swp12s0: Commit of object (id=2) failed. [ 358.550061] WARNING: CPU: 0 PID: 30 at net/switchdev/switchdev.c:281 switchdev_port_obj_add_now+0x9b/0xe0 [ 358.560754] CPU: 0 PID: 30 Comm: kworker/0:1 Not tainted 5.0.0-custom-13382-gf2449babf221 #1350 [ 358.570472] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ 358.580582] Workqueue: events switchdev_deferred_process_work [ 358.587001] RIP: 0010:switchdev_port_obj_add_now+0x9b/0xe0 ... [ 358.614109] RSP: 0018:ffffa6b900d6fe18 EFLAGS: 00010286 [ 358.619943] RAX: 0000000000000000 RBX: ffff8b00797ff000 RCX: 0000000000000000 [ 358.627912] RDX: ffff8b00b7a1d4c0 RSI: ffff8b00b7a152e8 RDI: ffff8b00b7a152e8 [ 358.635881] RBP: ffff8b005c3f5bc0 R08: 000000000000022b R09: 0000000000000000 [ 358.643850] R10: 0000000000000000 R11: ffffa6b900d6fcc8 R12: 0000000000000000 [ 358.651819] R13: dead000000000100 R14: ffff8b00b65a23c0 R15: 0ffff8b00b7a2200 [ 358.659790] FS: 0000000000000000(0000) GS:ffff8b00b7a00000(0000) knlGS:0000000000000000 [ 358.668820] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 358.675228] CR2: 00007f00aad90de0 CR3: 00000001ca80d000 CR4: 00000000001006f0 [ 358.683188] Call Trace: [ 358.685918] switchdev_port_obj_add_deferred+0x13/0x60 [ 358.691655] switchdev_deferred_process+0x6b/0xf0 [ 358.696907] switchdev_deferred_process_work+0xa/0x10 [ 358.702548] process_one_work+0x1f5/0x3f0 [ 358.707022] worker_thread+0x28/0x3c0 [ 358.711099] ? process_one_work+0x3f0/0x3f0 [ 358.715768] kthread+0x10d/0x130 [ 358.719369] ? __kthread_create_on_node+0x180/0x180 [ 358.724815] ret_from_fork+0x35/0x40 Fixes: 3a49b4fd ("mlxsw: Adding layer 2 multicast support") Signed-off-by:
Alex Kushnarov <alexanderk@mellanox.com> Tested-by:
-
Andy Duan authored
[ Upstream commit d7c3a206 ] Some SOC like i.MX6SX clock have some limits: - ahb clock should be disabled before ipg. - ahb and ipg clocks are required for MAC MII bus. So, move the ahb clock to runtime management together with ipg clock. Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Jan Kara authored
[ Upstream commit cae85cb8 ] Aneesh has reported that PPC triggers the following warning when excercising DAX code: IP set_pte_at+0x3c/0x190 LR insert_pfn+0x208/0x280 Call Trace: insert_pfn+0x68/0x280 dax_iomap_pte_fault.isra.7+0x734/0xa40 __xfs_filemap_fault+0x280/0x2d0 do_wp_page+0x48c/0xa40 __handle_mm_fault+0x8d0/0x1fd0 handle_mm_fault+0x140/0x250 __do_page_fault+0x300/0xd60 handle_page_fault+0x18 Now that is WARN_ON in set_pte_at which is VM_WARN_ON(pte_hw_valid(*ptep) && !pte_protnone(*ptep)); The problem is that on some architectures set_pte_at() cannot cope with a situation where there is already some (different) valid entry present. Use ptep_set_access_flags() instead to modify the pfn which is built to deal with modifying existing PTE. Link: http://lkml.kernel.org/r/20190311084537.16029-1-jack@suse.cz Fixes: b2770da6 "mm: add vm_insert_mixed_mkwrite()" Signed-off-by:
Jan Kara <jack@suse.cz> Reported-by:
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Cc: Chandan Rajendra <chandan@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jun Xiao authored
[ Upstream commit c77804be ] Commit 308c6caf ("net: hns: All ports can not work when insmod hns ko after rmmod.") add phy_stop in hns_nic_init_phy(), In the branch of "net", this method is effective, but in the branch of "net-next", it will cause a WARNING when hns modules loaded, reference to commit 2b3e88ea ("net: phy: improve phy state checking"): [10.092168] ------------[ cut here ]------------ [10.092171] called from state READY [10.092189] WARNING: CPU: 4 PID: 1 at ../drivers/net/phy/phy.c:854 phy_stop+0x90/0xb0 [10.092192] Modules linked in: [10.092197] CPU: 4 PID:1 Comm:swapper/0 Not tainted 4.20.0-rc7-next-20181220 #1 [10.092200] Hardware name: Huawei TaiShan 2280 /D05, BIOS Hisilicon D05 UEFI 16.12 Release 05/15/2017 [10.092202] pstate: 60000005 (nZCv daif -PAN -UAO) [10.092205] pc : phy_stop+0x90/0xb0 [10.092208] lr : phy_stop+0x90/0xb0 [10.092209] sp : ffff00001159ba90 [10.092212] x29: ffff00001159ba90 x28: 0000000000000007 [10.092215] x27: ffff000011180068 x26: ffff0000110a5620 [10.092218] x25: ffff0000113b6000 x24: ffff842f96dac000 [10.092221] x23: 0000000000000000 x22: 0000000000000000 [10.092223] x21: ffff841fb8425e18 x20: ffff801fb3a56438 [10.092226] x19: ffff801fb3a56000 x18: ffffffffffffffff [10.092228] x17: 0000000000000000 x16: 0000000000000000 [10.092231] x15: ffff00001122d6c8 x14: ffff00009159b7b7 [10.092234] x13: ffff00001159b7c5 x12: ffff000011245000 [10.092236] x11: 0000000005f5e0ff x10: ffff00001159b750 [10.092239] x9 : 00000000ffffffd0 x8 : 0000000000000465 [10.092242] x7 : ffff0000112457f8 x6 : ffff0000113bd7ce [10.092245] x5 : 0000000000000000 x4 : 0000000000000000 [10.092247] x3 : 00000000ffffffff x2 : ffff000011245828 [10.092250] x1 : 4b5860bd05871300 x0 : 0000000000000000 [10.092253] Call trace: [10.092255] phy_stop+0x90/0xb0 [10.092260] hns_nic_init_phy+0xf8/0x110 [10.092262] hns_nic_try_get_ae+0x4c/0x3b0 [10.092264] hns_nic_dev_probe+0x1fc/0x480 [10.092268] platform_drv_probe+0x50/0xa0 [10.092271] really_probe+0x1f4/0x298 [10.092273] driver_probe_device+0x58/0x108 [10.092275] __driver_attach+0xdc/0xe0 [10.092278] bus_for_each_dev+0x74/0xc8 [10.092280] driver_attach+0x20/0x28 [10.092283] bus_add_driver+0x1b8/0x228 [10.092285] driver_register+0x60/0x110 [10.092288] __platform_driver_register+0x40/0x48 [10.092292] hns_nic_dev_driver_init+0x18/0x20 [10.092296] do_one_initcall+0x5c/0x180 [10.092299] kernel_init_freeable+0x198/0x240 [10.092303] kernel_init+0x10/0x108 [10.092306] ret_from_fork+0x10/0x18 [10.092308] ---[ end trace 1396dd0278e397eb ]--- This WARNING occurred because of calling phy_stop before phy_start. The root cause of the problem in commit '308c6caf' is: Reference to hns_nic_init_phy, the flag phydev->supported is changed after phy_connect_direct. The flag phydev->supported is 0x6ff when hns modules is loaded, so will not change Fiber Port power(Reference to marvell.c), which is power on at default. Then the flag phydev->supported is changed to 0x6f, so Fiber Port power is off when removing hns modules. When hns modules installed again, the flag phydev->supported is default value 0x6ff, so will not change Fiber Port power(now is off), causing mac link not up problem. So the solution is change phy flags before phy_connect_direct. Fixes: 308c6caf ("net: hns: All ports can not work when insmod hns ko after rmmod.") Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
[ Upstream commit 12209993 ] There is one user of __kernel_fpu_begin() and before invoking it, it invokes preempt_disable(). So it could invoke kernel_fpu_begin() right away. The 32bit version of arch_efi_call_virt_setup() and arch_efi_call_virt_teardown() does this already. The comment above *kernel_fpu*() claims that before invoking __kernel_fpu_begin() preemption should be disabled and that KVM is a good example of doing it. Well, KVM doesn't do that since commit f775b13e ("x86,kvm: move qemu/guest FPU switching out to vcpu_run") so it is not an example anymore. With EFI gone as the last user of __kernel_fpu_{begin|end}(), both can be made static and not exported anymore. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Rik van Riel <riel@surriel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Nicolai Stange <nstange@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Cc: linux-efi <linux-efi@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181129150210.2k4mawt37ow6c2vq@linutronix.de Signed-off-by:
-
Ronnie Sahlberg authored
[ Upstream commit 05fd5c2c ] Commit 088aaf17 introduced a leak where if SMB2_read() returned an error we would return without freeing the request buffer. Cc: Stable <stable@vger.kernel.org> Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Damian Kos authored
[ Upstream commit e4056bbb ] This is basically the same fix as in commit fa68d4f8 ("drm/rockchip: fix for mailbox read size") but for cdn_dp_mailbox_validate_receive function. See patchwork.kernel.org/patch/10671981/ for details. Signed-off-by:
Damian Kos <dkos@cadence.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1542640463-18332-1-git-send-email-dkos@cadence.com Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 0ef235c7 ] ->destroy is only allowed to free data, or do other cleanups that do not have side effects on other state, such as visibility to other netlink requests. Such things need to be done in ->deactivate. As a transaction can fail, we need to make sure we can undo such operations, therefore ->activate() has to be provided too. So print a warning and refuse registration if expr->ops provides only one of the two operations. v2: fix nft_expr_check_ops to not repeat same check twice (Jones Desougi) Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
KT Liao authored
[ Upstream commit 738c06d0 ] There are many Lenovo laptops which need elan_i2c support, this patch adds relevant IDs to the Elan driver so that touchpads are recognized. Signed-off-by:
KT Liao <kt.liao@emc.com.tw> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Erik Schmauss authored
[ Upstream commit c5781ffb ] ACPICA commit b233720031a480abd438f2e9c643080929d144c3 ASL operation_regions declare a range of addresses that it uses. In a perfect world, the range of addresses should be used exclusively by the AML interpreter. The OS can use this information to decide which drivers to load so that the AML interpreter and device drivers use different regions of memory. During table load, the address information is added to a global address range list. Each node in this list contains an address range as well as a namespace node of the operation_region. This list is deleted at ACPI shutdown. Unfortunately, ASL operation_regions can be declared inside of control methods. Although this is not recommended, modern firmware contains such code. New module level code changes unintentionally removed the functionality of adding and removing nodes to the global address range list. A few months ago, support for adding addresses has been re- implemented. However, the removal of the address range list was missed and resulted in some systems to crash due to the address list containing bogus namespace nodes from operation_regions declared in control methods. In order to fix the crash, this change removes dynamic operation_regions after control method termination. Link: https://github.com/acpica/acpica/commit/b2337200 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202475 Fixes: 4abb951b ("ACPICA: AML interpreter: add region addresses in global list during initialization") Reported-by:
Michael J Gruber <mjg@fedoraproject.org> Signed-off-by:
Erik Schmauss <erik.schmauss@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
