- 21 Dec, 2019 37 commits
-
-
Greg Kroah-Hartman authored
-
Aaro Koskinen authored
commit 07b39753 upstream. Currently, if we drop a packet, we exit from NAPI loop before the budget is consumed. In some situations this will make the RX processing stall e.g. when flood pinging the system with oversized packets, as the errorneous packets are not dropped efficiently. If we drop a packet, we should just continue to the next one as long as the budget allows. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [acj: backport v4.14 -stable - adjust context] Signed-off-by:
Aviraj CJ <acj@cisco.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aaro Koskinen authored
commit 583e6361 upstream. We always program the maximum DMA buffer size into the receive descriptor, although the allocated size may be less. E.g. with the default MTU size we allocate only 1536 bytes. If somebody sends us a bigger frame, then memory may get corrupted. Fix by using exact buffer sizes. Signed-off-by:
-
Mathias Nyman authored
commit 057d476f upstream. A race in xhci USB3 remote wake handling may force device back to suspend after it initiated resume siganaling, causing a missed resume event or warm reset of device. When a USB3 link completes resume signaling and goes to enabled (UO) state a interrupt is issued and the interrupt handler will clear the bus_state->port_remote_wakeup resume flag, allowing bus suspend. If the USB3 roothub thread just finished reading port status before the interrupt, finding ports still in suspended (U3) state, but hasn't yet started suspending the hub, then the xhci interrupt handler will clear the flag that prevented roothub suspend and allow bus to suspend, forcing all port links back to suspended (U3) state. Example case: usb_runtime_suspend() # because all ports still show suspended U3 usb_suspend_both() hub_suspend(); # successful as hub->wakeup_bits not set yet ==> INTERRUPT xhci_irq() handle_port_status() clear bus_state->port_remote_wakeup usb_wakeup_notification() sets hub->wakeup_bits; kick_hub_wq() <== END INTERRUPT hcd_bus_suspend() xhci_bus_suspend() # success as port_remote_wakeup bits cleared Fix this by increasing roothub usage count during port resume to prevent roothub autosuspend, and by making sure bus_state->port_remote_wakeup flag is only cleared after resume completion is visible, i.e. after xhci roothub returned U0 or other non-U3 link state link on a get port status request. Issue rootcaused by Chiasheng Lee Cc: <stable@vger.kernel.org> Cc: Lee, Hou-hsun <hou-hsun.lee@intel.com> Reported-by:
Lee, Chiasheng <chiasheng.lee@intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-3-mathias.nyman@linux.intel.com Signed-off-by:
-
Alex Deucher authored
commit 008037d4 upstream. Shift and mask were reversed. Noticed by chance. Tested-by:
Meelis Roos <mroos@linux.ee> Reviewed-by:
Michel Dänzer <mdaenzer@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Bart Van Assche authored
commit 5480e299 upstream. Some time ago the block layer was modified such that timeout handlers are called from thread context instead of interrupt context. Make it safe to run the iSCSI timeout handler in thread context. This patch fixes the following lockdep complaint: ================================ WARNING: inconsistent lock state 5.5.1-dbg+ #11 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/7:1H/206 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff88802d9827e8 (&(&session->frwd_lock)->rlock){+.?.}, at: iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi] {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x106/0x240 _raw_spin_lock+0x38/0x50 iscsi_check_transport_timeouts+0x3e/0x210 [libiscsi] call_timer_fn+0x132/0x470 __run_timers.part.0+0x39f/0x5b0 run_timer_softirq+0x63/0xc0 __do_softirq+0x12d/0x5fd irq_exit+0xb3/0x110 smp_apic_timer_interrupt+0x131/0x3d0 apic_timer_interrupt+0xf/0x20 default_idle+0x31/0x230 arch_cpu_idle+0x13/0x20 default_idle_call+0x53/0x60 do_idle+0x38a/0x3f0 cpu_startup_entry+0x24/0x30 start_secondary+0x222/0x290 secondary_startup_64+0xa4/0xb0 irq event stamp: 1383705 hardirqs last enabled at (1383705): [<ffffffff81aace5c>] _raw_spin_unlock_irq+0x2c/0x50 hardirqs last disabled at (1383704): [<ffffffff81aacb98>] _raw_spin_lock_irq+0x18/0x50 softirqs last enabled at (1383690): [<ffffffffa0e2efea>] iscsi_queuecommand+0x76a/0xa20 [libiscsi] softirqs last disabled at (1383682): [<ffffffffa0e2e998>] iscsi_queuecommand+0x118/0xa20 [libiscsi] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&session->frwd_lock)->rlock); <Interrupt> lock(&(&session->frwd_lock)->rlock); *** DEADLOCK *** 2 locks held by kworker/7:1H/206: #0: ffff8880d57bf928 ((wq_completion)kblockd){+.+.}, at: process_one_work+0x472/0xab0 #1: ffff88802b9c7de8 ((work_completion)(&q->timeout_work)){+.+.}, at: process_one_work+0x476/0xab0 stack backtrace: CPU: 7 PID: 206 Comm: kworker/7:1H Not tainted 5.5.1-dbg+ #11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: kblockd blk_mq_timeout_work Call Trace: dump_stack+0xa5/0xe6 print_usage_bug.cold+0x232/0x23b mark_lock+0x8dc/0xa70 __lock_acquire+0xcea/0x2af0 lock_acquire+0x106/0x240 _raw_spin_lock+0x38/0x50 iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi] scsi_times_out+0xf4/0x440 [scsi_mod] scsi_timeout+0x1d/0x20 [scsi_mod] blk_mq_check_expired+0x365/0x3a0 bt_iter+0xd6/0xf0 blk_mq_queue_tag_busy_iter+0x3de/0x650 blk_mq_timeout_work+0x1af/0x380 process_one_work+0x56d/0xab0 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Fixes: 287922eb ("block: defer timeouts to a workqueue") Cc: Christoph Hellwig <hch@lst.de> Cc: Keith Busch <keith.busch@intel.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Chris Leech <cleech@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191209173457.187370-1-bvanassche@acm.org Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Hou Tao authored
commit 474e5595 upstream. We got the following warnings from thin_check during thin-pool setup: $ thin_check /dev/vdb examining superblock examining devices tree missing devices: [1, 84] too few entries in btree_node: 41, expected at least 42 (block 138, max_entries = 126) examining mapping tree The phenomenon is the number of entries in one node of details_info tree is less than (max_entries / 3). And it can be easily reproduced by the following procedures: $ new a thin pool $ presume the max entries of details_info tree is 126 $ new 127 thin devices (e.g. 1~127) to make the root node being full and then split $ remove the first 43 (e.g. 1~43) thin devices to make the children reblance repeatedly $ stop the thin pool $ thin_check The root cause is that the B-tree removal procedure in __rebalance2() doesn't guarantee the invariance: the minimal number of entries in non-root node should be >= (max_entries / 3). Simply fix the problem by increasing the rebalance threshold to make sure the number of entries in each child will be greater than or equal to (max_entries / 3 + 1), so no matter which child is used for removal, the number will still be valid. Cc: stable@vger.kernel.org Signed-off-by:
Hou Tao <houtao1@huawei.com> Acked-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Navid Emamdoost authored
commit 6645d42d upstream. In the implementation of sync_file_merge() the allocated sync_file is leaked if number of fences overflows. Release sync_file by goto err. Fixes: a02b9dc9 ("dma-buf/sync_file: refactor fence storage in struct sync_file") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191122220957.30427-1-navid.emamdoost@gmail.com Signed-off-by:
-
Jiang Yi authored
commit d567fb88 upstream. Since irq_bypass_register_producer() is called after request_irq(), we should do tear-down in reverse order: irq_bypass_unregister_producer() then free_irq(). Specifically free_irq() may release resources required by the irqbypass del_producer() callback. Notably an example provided by Marc Zyngier on arm64 with GICv4 that he indicates has the potential to wedge the hardware: free_irq(irq) __free_irq(irq) irq_domain_deactivate_irq(irq) its_irq_domain_deactivate() [unmap the VLPI from the ITS] kvm_arch_irq_bypass_del_producer(cons, prod) kvm_vgic_v4_unset_forwarding(kvm, irq, ...) its_unmap_vlpi(irq) [Unmap the VLPI from the ITS (again), remap the original LPI] Signed-off-by:
Jiang Yi <giangyi@amazon.com> Cc: stable@vger.kernel.org # v4.4+ Fixes: 6d7425f1 ("vfio: Register/unregister irq_bypass_producer") Link: https://lore.kernel.org/kvm/20191127164910.15888-1-giangyi@amazon.com Reviewed-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Eric Auger <eric.auger@redhat.com> [aw: commit log] Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Dmitry Osipenko authored
commit d70f7d31 upstream. There is an unfortunate typo in the code that results in writing to FLOW_CTLR_HALT instead of FLOW_CTLR_CSR. Cc: <stable@vger.kernel.org> Acked-by:
Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Lihua Yao authored
commit d60d0cff upstream. fin_pll is the parent of clock-controller@7e00f000, specify the dependency to ensure proper initialization order of clock providers. without this patch: [ 0.000000] S3C6410 clocks: apll = 0, mpll = 0 [ 0.000000] epll = 0, arm_clk = 0 with this patch: [ 0.000000] S3C6410 clocks: apll = 532000000, mpll = 532000000 [ 0.000000] epll = 24000000, arm_clk = 532000000 Cc: <stable@vger.kernel.org> Fixes: 3f6d439f ("clk: reverse default clk provider initialization order in of_clk_init()") Signed-off-by:
Lihua Yao <ylhuajnu@outlook.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Pavel Shilovsky authored
commit 44805b0e upstream. Currently the client translates O_SYNC and O_DIRECT flags into corresponding SMB create options when openning a file. The problem is that on reconnect when the file is being re-opened the client doesn't set those flags and it causes a server to reject re-open requests because create options don't match. The latter means that any subsequent system call against that open file fail until a share is re-mounted. Fix this by properly setting SMB create options when re-openning files after reconnects. Fixes: 1013e760 : ("SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags") Cc: Stable <stable@vger.kernel.org> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Bjorn Andersson authored
commit 278bcb73 upstream. By just cancelling the deferred rx worker during GLINK instance teardown any pending deferred commands are leaked, so free them. Fixes: b4f8e52b ("rpmsg: Introduce Qualcomm RPM glink driver") Cc: stable@vger.kernel.org Acked-by:
Chris Lew <clew@codeaurora.org> Tested-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Bjorn Andersson authored
commit c3dadc19 upstream. Attempting to transmit rx_done messages after the GLINK instance is being torn down will cause use after free and memory leaks. So cancel the intent_work and free up the pending intents. With this there are no concurrent accessors of the channel left during qcom_glink_native_remove() and there is therefor no need to hold the spinlock during this operation - which would prohibit the use of cancel_work_sync() in the release function. So remove this. Fixes: 1d2ea36e ("rpmsg: glink: Add rx done command") Cc: stable@vger.kernel.org Acked-by:
-
Chris Lew authored
commit f7e71498 upstream. The device release function is set before registering with rpmsg. If rpmsg registration fails, the framework will call device_put(), which invokes the release function. The channel create logic does not need to free rpdev if rpmsg_register_device() fails and release is called. Fixes: b4f8e52b ("rpmsg: Introduce Qualcomm RPM glink driver") Cc: stable@vger.kernel.org Tested-by:
-
Chris Lew authored
commit b646293e upstream. In a remote processor crash scenario, there is no guarantee the remote processor sent close requests before it went into a bad state. Remove the reference that is normally handled by the close command in the so channel resources can be released. Fixes: b4f8e52b ("rpmsg: Introduce Qualcomm RPM glink driver") Cc: stable@vger.kernel.org Tested-by:
-
Arun Kumar Neelakantam authored
commit ac74ea01 upstream. Extra channel reference put when remote sending OPEN_ACK after timeout causes use-after-free while handling next remote CLOSE command. Remove extra reference put in timeout case to avoid use-after-free. Fixes: b4f8e52b ("rpmsg: Introduce Qualcomm RPM glink driver") Cc: stable@vger.kernel.org Tested-by:
Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by:
-
Arun Kumar Neelakantam authored
commit b85f6b60 upstream. Memory allocated for re-usable intents are not freed during channel cleanup which causes memory leak in system. Check and free all re-usable memory to avoid memory leak. Fixes: 933b45da ("rpmsg: glink: Add support for TX intents") Cc: stable@vger.kernel.org Acked-By:
-
Chris Lew authored
commit 4623e8bf upstream. When wrapping around the FIFO, the remote expects the tail pointer to be reset to 0 on the edge case where the tail equals the FIFO length. Fixes: caf989c3 ("rpmsg: glink: Introduce glink smem based transport") Cc: stable@vger.kernel.org Signed-off-by:
-
Max Filippov authored
commit 36de10c4 upstream. Virtual and translated addresses retrieved by the xtensa TLB sanity checker must be consistent, i.e. correspond to the same state of the checked TLB entry. KASAN shadow memory is mapped dynamically using auto-refill TLB entries and thus may change TLB state between the virtual and translated address retrieval, resulting in false TLB insanity report. Move read_xtlb_translation close to read_xtlb_virtual to make sure that read values are consistent. Cc: stable@vger.kernel.org Fixes: a99e07ee ("xtensa: check TLB sanity on return to userspace") Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
George Cherian authored
commit f338bb9f upstream. Enhance the ACS quirk for Cavium Processors. Add the root port vendor IDs for ThunderX2 and ThunderX3 series of processors. [bhelgaas: add Fixes: and stable tag] Fixes: f2ddaf8d ("PCI: Apply Cavium ThunderX ACS quirk to more Root Ports") Link: https://lore.kernel.org/r/20191111024243.GA11408@dc5-eodlnx05.marvell.com Signed-off-by:
George Cherian <george.cherian@marvell.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Robert Richter <rrichter@marvell.com> Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
-
Jian-Hong Pan authored
commit e045fa29 upstream. When a driver enables MSI-X, msix_program_entries() reads the MSI-X Vector Control register for each vector and saves it in desc->masked. Each register is 32 bits and bit 0 is the actual Mask bit. When we restored these registers during resume, we previously set the Mask bit if *any* bit in desc->masked was set instead of when the Mask bit itself was set: pci_restore_state pci_restore_msi_state __pci_restore_msix_state for_each_pci_msi_entry msix_mask_irq(entry, entry->masked) <-- entire u32 word __pci_msix_desc_mask_irq(desc, flag) mask_bits = desc->masked & ~PCI_MSIX_ENTRY_CTRL_MASKBIT if (flag) <-- testing entire u32, not just bit 0 mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT writel(mask_bits, desc_addr + PCI_MSIX_ENTRY_VECTOR_CTRL) This means that after resume, MSI-X vectors were masked when they shouldn't be, which leads to timeouts like this: nvme nvme0: I/O 978 QID 3 timeout, completion polled On resume, set the Mask bit only when the saved Mask bit from suspend was set. This should remove the need for 19ea025e ("nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"). [bhelgaas: commit log, move fix to __pci_msix_desc_mask_irq()] Link: https://bugzilla.kernel.org/show_bug.cgi?id=204887 Link: https://lore.kernel.org/r/20191008034238.2503-1-jian-hong@endlessm.com Fixes: f2440d9a ("PCI MSI: Refactor interrupt masking code") Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
-
Steffen Liebergeld authored
commit d8558ac8 upstream. According to documentation [0] the correct offset for the Upstream Peer Decode Configuration Register (UPDCR) is 0x1014. It was previously defined as 0x1114. d99321b6 ("PCI: Enable quirks for PCIe ACS on Intel PCH root ports") intended to enforce isolation between PCI devices allowing them to be put into separate IOMMU groups. Due to the wrong register offset the intended isolation was not fully enforced. This is fixed with this patch. Please note that I did not test this patch because I have no hardware that implements this register. [0] https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/4th-gen-core-family-mobile-i-o-datasheet.pdf (page 325) Fixes: d99321b6 ("PCI: Enable quirks for PCIe ACS on Intel PCH root ports") Link: https://lore.kernel.org/r/7a3505df-79ba-8a28-464c-88b83eefffa6@kernkonzept.com Signed-off-by:
Steffen Liebergeld <steffen.liebergeld@kernkonzept.com> Signed-off-by:
Andrew Murray <andrew.murray@arm.com> Acked-by:
Ashok Raj <ashok.raj@intel.com> Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
-
Dexuan Cui authored
commit f2c33cca upstream. pci_pm_thaw_noirq() is supposed to return the device to D0 and restore its configuration registers, but previously it only did that for devices whose drivers implemented the new power management ops. Hibernation, e.g., via "echo disk > /sys/power/state", involves freezing devices, creating a hibernation image, thawing devices, writing the image, and powering off. The fact that thawing did not return devices with legacy power management to D0 caused errors, e.g., in this path: pci_pm_thaw_noirq if (pci_has_legacy_pm_support(pci_dev)) # true for Mellanox VF driver return pci_legacy_resume_early(dev) # ... legacy PM skips the rest pci_set_power_state(pci_dev, PCI_D0) pci_restore_state(pci_dev) pci_pm_thaw if (pci_has_legacy_pm_support(pci_dev)) pci_legacy_resume drv->resume mlx4_resume ... pci_enable_msix_range ... if (dev->current_state != PCI_D0) # <--- return -EINVAL; which caused these warnings: mlx4_core a6d1:00:02.0: INTx is not supported in multi-function mode, aborting PM: dpm_run_callback(): pci_pm_thaw+0x0/0xd7 returns -95 PM: Device a6d1:00:02.0 failed to thaw: error -95 Return devices to D0 and restore config registers for all devices, not just those whose drivers support new power management. [bhelgaas: also call pci_restore_state() before pci_legacy_resume_early(), update comment, add stable tag, commit log] Link: https://lore.kernel.org/r/KU1P153MB016637CAEAD346F0AA8E3801BFAD0@KU1P153MB0166.APCP153.PROD.OUTLOOK.COM Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org # v4.13+ Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit d7ce17fb which is commit 55576cf1 upstream. It's causing "odd" interactions with older kernels, so it probably isn't a good idea to cause timing changes there. This has been reported to cause oopses on Pixel devices. Reported-by:
Siddharth Kapoor <ksiddharth@google.com> Cc: Mark Brown <broonie@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Ivan Bornyakov authored
commit e9a9853c upstream. Ternary operator have lower precedence then bitwise or, so 'cdw10' was calculated wrong. Signed-off-by:
Ivan Bornyakov <brnkv.i1@gmail.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
Keith Busch <keith.busch@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 501a90c9 ] syzbot was once again able to crash a host by setting a very small mtu on loopback device. Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data() Also add a READ_ONCE() when the device mtu is read. Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field. Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations. Hopefully we will add the missing ones in followup patches. [1] refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89 RSP: 0018:ffff88809689f550 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1 R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001 R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40 refcount_add include/linux/refcount.h:193 [inline] skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821 kernel_sendpage+0x92/0xf0 net/socket.c:3794 sock_sendpage+0x8b/0xc0 net/socket.c:936 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636 splice_from_pipe+0x108/0x170 fs/splice.c:671 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842 do_splice_from fs/splice.c:861 [inline] direct_splice_actor+0x123/0x190 fs/splice.c:1035 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441409 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005 RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180 R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 1470ddf7 ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 721c8daf ] Syncookies borrow the ->rx_opt.ts_recent_stamp field to store the timestamp of the last synflood. Protect them with READ_ONCE() and WRITE_ONCE() since reads and writes aren't serialised. Use of .rx_opt.ts_recent_stamp for storing the synflood timestamp was introduced by a0f82f64 ("syncookies: remove last_synq_overflow from struct tcp_sock"). But unprotected accesses were already there when timestamp was stored in .last_synq_overflow. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit cb44a08f ] When no synflood occurs, the synflood timestamp isn't updated. Therefore it can be so old that time_after32() can consider it to be in the future. That's a problem for tcp_synq_no_recent_overflow() as it may report that a recent overflow occurred while, in fact, it's just that jiffies has grown past 'last_overflow' + TCP_SYNCOOKIE_VALID + 2^31. Spurious detection of recent overflows lead to extra syncookie verification in cookie_v[46]_check(). At that point, the verification should fail and the packet dropped. But we should have dropped the packet earlier as we didn't even send a syncookie. Let's refine tcp_synq_no_recent_overflow() to report a recent overflow only if jiffies is within the [last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval. This way, no spurious recent overflow is reported when jiffies wraps and 'last_overflow' becomes in the future from the point of view of time_after32(). However, if jiffies wraps and enters the [last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval (with 'last_overflow' being a stale synflood timestamp), then tcp_synq_no_recent_overflow() still erroneously reports an overflow. In such cases, we have to rely on syncookie verification to drop the packet. We unfortunately have no way to differentiate between a fresh and a stale syncookie timestamp. In practice, using last_overflow as lower bound is problematic. If the synflood timestamp is concurrently updated between the time we read jiffies and the moment we store the timestamp in 'last_overflow', then 'now' becomes smaller than 'last_overflow' and tcp_synq_no_recent_overflow() returns true, potentially dropping a valid syncookie. Reading jiffies after loading the timestamp could fix the problem, but that'd require a memory barrier. Let's just accommodate for potential timestamp growth instead and extend the interval using 'last_overflow - HZ' as lower bound. Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 04d26e7b ] If no synflood happens for a long enough period of time, then the synflood timestamp isn't refreshed and jiffies can advance so much that time_after32() can't accurately compare them any more. Therefore, we can end up in a situation where time_after32(now, last_overflow + HZ) returns false, just because these two values are too far apart. In that case, the synflood timestamp isn't updated as it should be, which can trick tcp_synq_no_recent_overflow() into rejecting valid syncookies. For example, let's consider the following scenario on a system with HZ=1000: * The synflood timestamp is 0, either because that's the timestamp of the last synflood or, more commonly, because we're working with a freshly created socket. * We receive a new SYN, which triggers synflood protection. Let's say that this happens when jiffies == 2147484649 (that is, 'synflood timestamp' + HZ + 2^31 + 1). * Then tcp_synq_overflow() doesn't update the synflood timestamp, because time_after32(2147484649, 1000) returns false. With: - 2147484649: the value of jiffies, aka. 'now'. - 1000: the value of 'last_overflow' + HZ. * A bit later, we receive the ACK completing the 3WHS. But cookie_v[46]_check() rejects it because tcp_synq_no_recent_overflow() says that we're not under synflood. That's because time_after32(2147484649, 120000) returns false. With: - 2147484649: the value of jiffies, aka. 'now'. - 120000: the value of 'last_overflow' + TCP_SYNCOOKIE_VALID. Of course, in reality jiffies would have increased a bit, but this condition will last for the next 119 seconds, which is far enough to accommodate for jiffie's growth. Fix this by updating the overflow timestamp whenever jiffies isn't within the [last_overflow, last_overflow + HZ] range. That shouldn't have any performance impact since the update still happens at most once per second. Now we're guaranteed to have fresh timestamps while under synflood, so tcp_synq_no_recent_overflow() can safely use it with time_after32() in such situations. Stale timestamps can still make tcp_synq_no_recent_overflow() return the wrong verdict when not under synflood. This will be handled in the next patch. For 64 bits architectures, the problem was introduced with the conversion of ->tw_ts_recent_stamp to 32 bits integer by commit cca9bab1 ("tcp: use monotonic timestamps for PAWS"). The problem has always been there on 32 bits architectures. Fixes: cca9bab1 ("tcp: use monotonic timestamps for PAWS") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 9cf1cd8e ] In order to set/get/dump, the tipc uses the generic netlink infrastructure. So, when tipc module is inserted, init function calls genl_register_family(). After genl_register_family(), set/get/dump commands are immediately allowed and these callbacks internally use the net_generic. net_generic is allocated by register_pernet_device() but this is called after genl_register_family() in the __init function. So, these callbacks would use un-initialized net_generic. Test commands: #SHELL1 while : do modprobe tipc modprobe -rv tipc done #SHELL2 while : do tipc link list done Splat looks like: [ 59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled [ 59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194 [ 59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc] [ 59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00 [ 59.622550][ T2780] NET: Registered protocol family 30 [ 59.624627][ T2788] RSP: 0018:ffff88804b09f578 EFLAGS: 00010202 [ 59.624630][ T2788] RAX: dffffc0000000000 RBX: 0000000000000011 RCX: 000000008bc66907 [ 59.624631][ T2788] RDX: 0000000000000229 RSI: 000000004b3cf4cc RDI: 0000000000001149 [ 59.624633][ T2788] RBP: ffff88804b09f588 R08: 0000000000000003 R09: fffffbfff4fb3df1 [ 59.624635][ T2788] R10: fffffbfff50318f8 R11: ffff888066cadc18 R12: ffffffffa6cc2f40 [ 59.624637][ T2788] R13: 1ffff11009613eba R14: ffff8880662e9328 R15: ffff8880662e9328 [ 59.624639][ T2788] FS: 00007f57d8f7b740(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000 [ 59.624645][ T2788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 59.625875][ T2780] tipc: Started in single node mode [ 59.626128][ T2788] CR2: 00007f57d887a8c0 CR3: 000000004b140002 CR4: 00000000000606e0 [ 59.633991][ T2788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 59.635195][ T2788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 59.636478][ T2788] Call Trace: [ 59.637025][ T2788] tipc_nl_add_bc_link+0x179/0x1470 [tipc] [ 59.638219][ T2788] ? lock_downgrade+0x6e0/0x6e0 [ 59.638923][ T2788] ? __tipc_nl_add_link+0xf90/0xf90 [tipc] [ 59.639533][ T2788] ? tipc_nl_node_dump_link+0x318/0xa50 [tipc] [ 59.640160][ T2788] ? mutex_lock_io_nested+0x1380/0x1380 [ 59.640746][ T2788] tipc_nl_node_dump_link+0x4fd/0xa50 [tipc] [ 59.641356][ T2788] ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc] [ 59.642088][ T2788] ? __skb_ext_del+0x270/0x270 [ 59.642594][ T2788] genl_lock_dumpit+0x85/0xb0 [ 59.643050][ T2788] netlink_dump+0x49c/0xed0 [ 59.643529][ T2788] ? __netlink_sendskb+0xc0/0xc0 [ 59.644044][ T2788] ? __netlink_dump_start+0x190/0x800 [ 59.644617][ T2788] ? __mutex_unlock_slowpath+0xd0/0x670 [ 59.645177][ T2788] __netlink_dump_start+0x5a0/0x800 [ 59.645692][ T2788] genl_rcv_msg+0xa75/0xe90 [ 59.646144][ T2788] ? __lock_acquire+0xdfe/0x3de0 [ 59.646692][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320 [ 59.647340][ T2788] ? genl_lock_dumpit+0xb0/0xb0 [ 59.647821][ T2788] ? genl_unlock+0x20/0x20 [ 59.648290][ T2788] ? genl_parallel_done+0xe0/0xe0 [ 59.648787][ T2788] ? find_held_lock+0x39/0x1d0 [ 59.649276][ T2788] ? genl_rcv+0x15/0x40 [ 59.649722][ T2788] ? lock_contended+0xcd0/0xcd0 [ 59.650296][ T2788] netlink_rcv_skb+0x121/0x350 [ 59.650828][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320 [ 59.651491][ T2788] ? netlink_ack+0x940/0x940 [ 59.651953][ T2788] ? lock_acquire+0x164/0x3b0 [ 59.652449][ T2788] genl_rcv+0x24/0x40 [ 59.652841][ T2788] netlink_unicast+0x421/0x600 [ ... ] Fixes: 7e436905 ("tipc: fix a slab object leak") Fixes: a62fbcce ("tipc: make subscriber server support net namespace") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9424e2e7 ] Back in 2008, Adam Langley fixed the corner case of packets for flows having all of the following options : MD5 TS SACK Since MD5 needs 20 bytes, and TS needs 12 bytes, no sack block can be cooked from the remaining 8 bytes. tcp_established_options() correctly sets opts->num_sack_blocks to zero, but returns 36 instead of 32. This means TCP cooks packets with 4 extra bytes at the end of options, containing unitialized bytes. Fixes: 33ad798c ("tcp: options clean up") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Aaron Conole authored
[ Upstream commit 5d50aa83 ] The openvswitch module shares a common conntrack and NAT infrastructure exposed via netfilter. It's possible that a packet needs both SNAT and DNAT manipulation, due to e.g. tuple collision. Netfilter can support this because it runs through the NAT table twice - once on ingress and again after egress. The openvswitch module doesn't have such capability. Like netfilter hook infrastructure, we should run through NAT twice to keep the symmetry. Fixes: 05752523 ("openvswitch: Interface with NAT.") Signed-off-by:
Aaron Conole <aconole@redhat.com> Signed-off-by:
-
Mian Yousaf Kaukab authored
[ Upstream commit a350d2e7 ] Since commit 2b3e88ea ("net: phy: improve phy state checking") phy_start_aneg() expects phy state to be >= PHY_UP. Call phy_start() before calling phy_start_aneg() during probe so that autonegotiation is initiated. As phy_start() takes care of calling phy_start_aneg(), drop the explicit call to phy_start_aneg(). Network fails without this patch on Octeon TX. Fixes: 2b3e88ea ("net: phy: improve phy state checking") Signed-off-by:
Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Grygorii Strashko authored
[ Upstream commit 51302f77 ] Now RX interrupt is triggered twice every time, because in cpsw_rx_interrupt() it is asked first and then disabled. So there will be pending interrupt always, when RX interrupt is enabled again in NAPI handler. Fix it by first disabling IRQ and then do ask. Fixes: 870915fe ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Alexander Lobakin authored
[ Upstream commit 8bef0af0 ] Commit 43e66528 ("net-next: dsa: fix flow dissection") added an ability to override protocol and network offset during flow dissection for DSA-enabled devices (i.e. controllers shipped as switch CPU ports) in order to fix skb hashing for RPS on Rx path. However, skb_hash() and added part of code can be invoked not only on Rx, but also on Tx path if we have a multi-queued device and: - kernel is running on UP system or - XPS is not configured. The call stack in this two cases will be like: dev_queue_xmit() -> __dev_queue_xmit() -> netdev_core_pick_tx() -> netdev_pick_tx() -> skb_tx_hash() -> skb_get_hash(). The problem is that skbs queued for Tx have both network offset and correct protocol already set up even after inserting a CPU tag by DSA tagger, so calling tag_ops->flow_dissect() on this path actually only breaks flow dissection and hashing. This can be observed by adding debug prints just before and right after tag_ops->flow_dissect() call to the related block of code: Before the patch: Rx path (RPS): [ 19.240001] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 19.244271] tag_ops->flow_dissect() [ 19.247811] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */ [ 19.215435] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 19.219746] tag_ops->flow_dissect() [ 19.223241] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */ [ 18.654057] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 18.658332] tag_ops->flow_dissect() [ 18.661826] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */ Tx path (UP system): [ 18.759560] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */ [ 18.763933] tag_ops->flow_dissect() [ 18.767485] Tx: proto: 0x920b, nhoff: 34 /* junk */ [ 22.800020] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */ [ 22.804392] tag_ops->flow_dissect() [ 22.807921] Tx: proto: 0x920b, nhoff: 34 /* junk */ [ 16.898342] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */ [ 16.902705] tag_ops->flow_dissect() [ 16.906227] Tx: proto: 0x920b, nhoff: 34 /* junk */ After: Rx path (RPS): [ 16.520993] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 16.525260] tag_ops->flow_dissect() [ 16.528808] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */ [ 15.484807] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 15.490417] tag_ops->flow_dissect() [ 15.495223] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */ [ 17.134621] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 17.138895] tag_ops->flow_dissect() [ 17.142388] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */ Tx path (UP system): [ 15.499558] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */ [ 20.664689] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */ [ 18.565782] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */ In order to fix that we can add the check 'proto == htons(ETH_P_XDSA)' to prevent code from calling tag_ops->flow_dissect() on Tx. I also decided to initialize 'offset' variable so tagger callbacks can now safely leave it untouched without provoking a chaos. Fixes: 43e66528 ("net-next: dsa: fix flow dissection") Signed-off-by:
Alexander Lobakin <alobakin@dlink.ru> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit c4b4c421 ] We have an interesting memory leak in the bridge when it is being unregistered and is a slave to a master device which would change the mac of its slaves on unregister (e.g. bond, team). This is a very unusual setup but we do end up leaking 1 fdb entry because dev_set_mac_address() would cause the bridge to insert the new mac address into its table after all fdbs are flushed, i.e. after dellink() on the bridge has finished and we call NETDEV_UNREGISTER the bond/team would release it and will call dev_set_mac_address() to restore its original address and that in turn will add an fdb in the bridge. One fix is to check for the bridge dev's reg_state in its ndo_set_mac_address callback and return an error if the bridge is not in NETREG_REGISTERED. Easy steps to reproduce: 1. add bond in mode != A/B 2. add any slave to the bond 3. add bridge dev as a slave to the bond 4. destroy the bridge device Trace: unreferenced object 0xffff888035c4d080 (size 128): comm "ip", pid 4068, jiffies 4296209429 (age 1413.753s) hex dump (first 32 bytes): 41 1d c9 36 80 88 ff ff 00 00 00 00 00 00 00 00 A..6............ d2 19 c9 5e 3f d7 00 00 00 00 00 00 00 00 00 00 ...^?........... backtrace: [<00000000ddb525dc>] kmem_cache_alloc+0x155/0x26f [<00000000633ff1e0>] fdb_create+0x21/0x486 [bridge] [<0000000092b17e9c>] fdb_insert+0x91/0xdc [bridge] [<00000000f2a0f0ff>] br_fdb_change_mac_address+0xb3/0x175 [bridge] [<000000001de02dbd>] br_stp_change_bridge_id+0xf/0xff [bridge] [<00000000ac0e32b1>] br_set_mac_address+0x76/0x99 [bridge] [<000000006846a77f>] dev_set_mac_address+0x63/0x9b [<00000000d30738fc>] __bond_release_one+0x3f6/0x455 [bonding] [<00000000fc7ec01d>] bond_netdev_event+0x2f2/0x400 [bonding] [<00000000305d7795>] notifier_call_chain+0x38/0x56 [<0000000028885d4a>] call_netdevice_notifiers+0x1e/0x23 [<000000008279477b>] rollback_registered_many+0x353/0x6a4 [<0000000018ef753a>] unregister_netdevice_many+0x17/0x6f [<00000000ba854b7a>] rtnl_delete_link+0x3c/0x43 [<00000000adf8618d>] rtnl_dellink+0x1dc/0x20a [<000000009b6395fd>] rtnetlink_rcv_msg+0x23d/0x268 Fixes: 43598813 ("bridge: add local MAC address to forwarding table (v2)") Reported-by: syzbot+2add91c08eb181fea1bf@syzkaller.appspotmail.com Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
- 17 Dec, 2019 3 commits
-
-
Greg Kroah-Hartman authored
-
Erhard Furtner authored
[ Upstream commit 2aacace6 ] In attach_node_and_children memory is allocated for full_name via kasprintf. If the condition of the 1st if is not met the function returns early without freeing the memory. Add a kfree() to fix that. This has been detected with kmemleak: Link: https://bugzilla.kernel.org/show_bug.cgi?id=205327 It looks like the leak was introduced by this commit: Fixes: 5babefb7 ("of: unittest: allow base devicetree to have symbol metadata") Signed-off-by:
Erhard Furtner <erhard_f@mailbox.org> Reviewed-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guoqing Jiang authored
[ Upstream commit a7ede3d1 ] With commit 6ce220dd ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list"), we don't want to set STRIPE_HANDLE flag for sh which is already in batch list. However, the stripe which is the head of batch list should set this flag, otherwise panic could happen inside init_stripe at BUG_ON(sh->batch_head), it is reproducible with raid5 on top of nvdimm devices per Xiao oberserved. Thanks for Xiao's effort to verify the change. Fixes: 6ce220dd ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list") Reported-by:
Xiao Ni <xni@redhat.com> Tested-by:
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
