- 28 Apr, 2021 40 commits
-
-
Greg Kroah-Hartman authored
Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Jason Self <jason@bluehome.net> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Hulk Robot <hulkrobot@huawei.com> Link: https://lore.kernel.org/r/20210426072819.721586742@linuxfoundation.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit a8b3b519 upstream. suspend() does its poisoning conditionally, resume() does it unconditionally. On a device with combined interfaces this will balance, on a device with two interfaces the counter will go negative and resubmission will fail. Both actions need to be done conditionally. Fixes: 6069e3e9 ("USB: cdc-acm: untangle a circular dependency between callback and softint") Signed-off-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210421074513.4327-1-oneukum@suse.com Signed-off-by:
-
Johan Hovold authored
commit 2ad5692d upstream. Commit 8a12f883 ("net: hso: fix null-ptr-deref during tty device unregistration") fixed the racy minor allocation reported by syzbot, but introduced an unconditional NULL-pointer dereference on every disconnect instead. Specifically, the serial device table must no longer be accessed after the minor has been released by hso_serial_tty_unregister(). Fixes: 8a12f883 ("net: hso: fix null-ptr-deref during tty device unregistration") Cc: stable@vger.kernel.org Cc: Anirudh Rayabharam <mail@anirudhrb.com> Reported-by:
Leonardo Antoniazzi <leoanto@aruba.it> Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Anirudh Rayabharam <mail@anirudhrb.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mike Galbraith authored
commit 5849cdf8 upstream. Commit in Fixes: added support for kexec-ing a kernel on panic using a new system call. As part of it, it does prepare a memory map for the new kernel. However, while doing so, it wrongly accesses memory it has not allocated: it accesses the first element of the cmem->ranges[] array in memmap_exclude_ranges() but it has not allocated the memory for it in crash_setup_memmap_entries(). As KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in crash_setup_memmap_entries+0x17e/0x3a0 Write of size 8 at addr ffffc90000426008 by task kexec/1187 (gdb) list *crash_setup_memmap_entries+0x17e 0xffffffff8107cafe is in crash_setup_memmap_entries (arch/x86/kernel/crash.c:322). 317 unsigned long long mend) 318 { 319 unsigned long start, end; 320 321 cmem->ranges[0].start = mstart; 322 cmem->ranges[0].end = mend; 323 cmem->nr_ranges = 1; 324 325 /* Exclude elf header region */ 326 start = image->arch.elf_load_addr; (gdb) Make sure the ranges array becomes a single element allocated. [ bp: Write a proper commit message. ] Fixes: dd5f7260 ("kexec: support for kexec on panic using new system call") Signed-off-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Dave Young <dyoung@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/725fa3dc1da2737f0f6188a1a9701bead257ea9d.camel@gmx.de Signed-off-by:
-
John Paul Adrian Glaubitz authored
[ Upstream commit f4bf09dc ] The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf failing to build: CC /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o In file included from /usr/src/linux/tools/include/asm/barrier.h:24, from /usr/src/linux/tools/include/linux/ring_buffer.h:4, from libbpf.c:37: /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror] 43 | #define ia64_mf() asm volatile ("mf" ::: "memory") | In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20, from /usr/include/ia64-linux-gnu/asm/swab.h:11, from /usr/include/linux/swab.h:8, from /usr/include/linux/byteorder/little_endian.h:13, from /usr/include/ia64-linux-gnu/asm/byteorder.h:5, from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20, from libbpf.c:36: /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition 382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory") | cc1: all warnings being treated as errors Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h. Signed-off-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Randy Dunlap authored
[ Upstream commit e2af9da4 ] Fix IA64 discontig.c Section mismatch warnings. When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions computer_pernodesize() and scatter_node_data() should not be marked as __meminit because they are needed after init, on any memory hotplug event. Also, early_nr_cpus_node() is called by compute_pernodesize(), so early_nr_cpus_node() cannot be __meminit either. WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize() The function arch_alloc_nodedata() references the function __meminit compute_pernodesize(). This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong. WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data() The function arch_refresh_nodedata() references the function __meminit scatter_node_data(). This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong. WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node() The function compute_pernodesize() references the function __meminit early_nr_cpus_node(). This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong. Link: https://lkml.kernel.org/r/20210411001201.3069-1-rdunlap@infradead.org Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Mike Rapoport <rppt@kernel.org> Signed-off-by:
-
Wan Jiabing authored
[ Upstream commit 416dcc5c ] Fix the following coccicheck warning: ./drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h:413:6-28: duplicated argument to & or | The CN6XXX_INTR_M1UPB0_ERR here is duplicate. Here should be CN6XXX_INTR_M1UNB0_ERR. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
-
Michael Brown authored
[ Upstream commit 2afeec08 ] The logic in connect() is currently written with the assumption that xenbus_watch_pathfmt() will return an error for a node that does not exist. This assumption is incorrect: xenstore does allow a watch to be registered for a nonexistent node (and will send notifications should the node be subsequently created). As of commit 1f256578 ("xen-netback: remove 'hotplug-status' once it has served its purpose"), this leads to a failure when a domU transitions into XenbusStateConnected more than once. On the first domU transition into Connected state, the "hotplug-status" node will be deleted by the hotplug_status_changed() callback in dom0. On the second or subsequent domU transition into Connected state, the hotplug_status_changed() callback will therefore never be invoked, and so the backend will remain stuck in InitWait. This failure prevents scenarios such as reloading the xen-netfront module within a domU, or booting a domU via iPXE. There is unfortunately no way for the domU to work around this dom0 bug. Fix by explicitly checking for existence of the "hotplug-status" node, thereby creating the behaviour that was previously assumed to exist. Signed-off-by:
Michael Brown <mbrown@fensystems.co.uk> Reviewed-by:
Paul Durrant <paul@xen.org> Signed-off-by:
-
Vasily Gorbik authored
[ Upstream commit a994eddb ] Currently psw_idle does not allocate a stack frame and does not save its r14 and r15 into the save area. Even though this is valid from call ABI point of view, because psw_idle does not make any calls explicitly, in reality psw_idle is an entry point for controlled transition into serving interrupts. So, in practice, psw_idle stack frame is analyzed during stack unwinding. Depending on build options that r14 slot in the save area of psw_idle might either contain a value saved by previous sibling call or complete garbage. [task 0000038000003c28] do_ext_irq+0xd6/0x160 [task 0000038000003c78] ext_int_handler+0xba/0xe8 [task *0000038000003dd8] psw_idle_exit+0x0/0x8 <-- pt_regs ([task 0000038000003dd8] 0x0) [task 0000038000003e10] default_idle_call+0x42/0x148 [task 0000038000003e30] do_idle+0xce/0x160 [task 0000038000003e70] cpu_startup_entry+0x36/0x40 [task 0000038000003ea0] arch_call_rest_init+0x76/0x80 So, to make a stacktrace nicer and actually point for the real caller of psw_idle in this frequently occurring case, make psw_idle save its r14. [task 0000038000003c28] do_ext_irq+0xd6/0x160 [task 0000038000003c78] ext_int_handler+0xba/0xe8 [task *0000038000003dd8] psw_idle_exit+0x0/0x6 <-- pt_regs ([task 0000038000003dd8] arch_cpu_idle+0x3c/0xd0) [task 0000038000003e10] default_idle_call+0x42/0x148 [task 0000038000003e30] do_idle+0xce/0x160 [task 0000038000003e70] cpu_startup_entry+0x36/0x40 [task 0000038000003ea0] arch_call_rest_init+0x76/0x80 Reviewed-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
-
Phillip Potter authored
[ Upstream commit 6628ddfe ] Check within geneve_xmit_skb/geneve6_xmit_skb that sk_buff structure is large enough to include IPv4 or IPv6 header, and reject if not. The geneve_xmit_skb portion and overall idea was contributed by Eric Dumazet. Fixes a KMSAN-found uninit-value bug reported by syzbot at: https://syzkaller.appspot.com/bug?id=abe95dc3e3e9667fc23b8d81f29ecad95c6f106f Suggested-by:
Eric Dumazet <edumazet@google.com> Reported-by: syzbot+2e406a9ac75bb71d4b7a@syzkaller.appspotmail.com Signed-off-by:
Phillip Potter <phil@philpotter.co.uk> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit a1ebdb37 ] Also some omap3 devices like n900 seem to have eMMC and micro-sd swapped around with commit 21b2cec6 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4"). Let's fix the issue with aliases as discussed on the mailing lists. While the mmc aliases should be board specific, let's first fix the issue with minimal changes. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Jiapeng Zhong authored
[ Upstream commit e29c62ff ] Fix the following coccicheck warnings: ./drivers/hid/wacom_wac.c:2536:2-6: WARNING: Assignment of 0/1 to bool variable. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit fa8ba6e5 ] When input_register_device() fails, no error return code is assigned. To fix this bug, ret is assigned with -ENOENT as error return code. Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Yuanyuan Zhong authored
[ Upstream commit 196d9417 ] When updating pin names for Intel Lewisburg, the numbers of pins were left behind. Update them accordingly. Fixes: e66ff71f ("pinctrl: lewisburg: Update pin list according to v1.1v6") Signed-off-by:
Yuanyuan Zhong <yzhong@purestorage.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Zhang Yi authored
The backport of upstream patch 5dccdc5a ("ext4: do not iput inode under running transaction in ext4_rename()") introduced a regression on the stable kernels 4.14 and older. One of the end_rename error label was forgetting to change to release_bh, which may trigger below bug. ------------[ cut here ]------------ kernel BUG at /home/zhangyi/hulk-4.4/fs/ext4/ext4_jbd2.c:30! ... Call Trace: [<ffffffff8b4207b2>] ext4_rename+0x9e2/0x10c0 [<ffffffff8b331324>] ? unlazy_walk+0x124/0x2a0 [<ffffffff8b420eb5>] ext4_rename2+0x25/0x60 [<ffffffff8b335104>] vfs_rename+0x3a4/0xed0 [<ffffffff8b33a7ad>] SYSC_renameat2+0x57d/0x7f0 [<ffffffff8b33c119>] SyS_renameat+0x19/0x30 [<ffffffff8bc57bb8>] entry_SYSCALL_64_fastpath+0x18/0x78 ... ---[ end trace 75346ce7c76b9f06 ]--- Fixes: d962f1b4 ("ext4: do not iput inode under running transaction in ext4_rename()") Signed-off-by:
Zhang Yi <yi.zhang@huawei.com> Signed-off-by:
-
Anirudh Rayabharam authored
commit 8a12f883 upstream Multiple ttys try to claim the same the minor number causing a double unregistration of the same device. The first unregistration succeeds but the next one results in a null-ptr-deref. The get_free_serial_index() function returns an available minor number but doesn't assign it immediately. The assignment is done by the caller later. But before this assignment, calls to get_free_serial_index() would return the same minor number. Fix this by modifying get_free_serial_index to assign the minor number immediately after one is found to be and rename it to obtain_minor() to better reflect what it does. Similary, rename set_serial_by_index() to release_minor() and modify it to free up the minor number of the given hso_serial. Every obtain_minor() should have corresponding release_minor() call. Fixes: 72dc1c09 ("HSO: add option hso driver") Reported-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com Tested-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com Reviewed-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Linus Torvalds authored
commit 17839856 upstream. Doing a "get_user_pages()" on a copy-on-write page for reading can be ambiguous: the page can be COW'ed at any time afterwards, and the direction of a COW event isn't defined. Yes, whoever writes to it will generally do the COW, but if the thread that did the get_user_pages() unmapped the page before the write (and that could happen due to memory pressure in addition to any outright action), the writer could also just take over the old page instead. End result: the get_user_pages() call might result in a page pointer that is no longer associated with the original VM, and is associated with - and controlled by - another VM having taken it over instead. So when doing a get_user_pages() on a COW mapping, the only really safe thing to do would be to break the COW when getting the page, even when only getting it for reading. At the same time, some users simply don't even care. For example, the perf code wants to look up the page not because it cares about the page, but because the code simply wants to look up the physical address of the access for informational purposes, and doesn't really care about races when a page might be unmapped and remapped elsewhere. This adds logic to force a COW event by setting FOLL_WRITE on any copy-on-write mapping when FOLL_GET (or FOLL_PIN) is used to get a page pointer as a result. The current semantics end up being: - __get_user_pages_fast(): no change. If you don't ask for a write, you won't break COW. You'd better know what you're doing. - get_user_pages_fast(): the fast-case "look it up in the page tables without anything getting mmap_sem" now refuses to follow a read-only page, since it might need COW breaking. Which happens in the slow path - the fast path doesn't know if the memory might be COW or not. - get_user_pages() (including the slow-path fallback for gup_fast()): for a COW mapping, turn on FOLL_WRITE for FOLL_GET/FOLL_PIN, with very similar semantics to FOLL_FORCE. If it turns out that we want finer granularity (ie "only break COW when it might actually matter" - things like the zero page are special and don't need to be broken) we might need to push these semantics deeper into the lookup fault path. So if people care enough, it's possible that we might end up adding a new internal FOLL_BREAK_COW flag to go with the internal FOLL_COW flag we already have for tracking "I had a COW". Alternatively, if it turns out that different callers might want to explicitly control the forced COW break behavior, we might even want to make such a flag visible to the users of get_user_pages() instead of using the above default semantics. But for now, this is mostly commentary on the issue (this commit message being a lot bigger than the patch, and that patch in turn is almost all comments), with that minimal "enable COW breaking early" logic using the existing FOLL_WRITE behavior. [ It might be worth noting that we've always had this ambiguity, and it could arguably be seen as a user-space issue. You only get private COW mappings that could break either way in situations where user space is doing cooperative things (ie fork() before an execve() etc), but it _is_ surprising and very subtle, and fork() is supposed to give you independent address spaces. So let's treat this as a kernel issue and make the semantics of get_user_pages() easier to understand. Note that obviously a true shared mapping will still get a page that can change under us, so this does _not_ mean that get_user_pages() somehow returns any "stable" page ] [surenb: backport notes Replaced (gup_flags | FOLL_WRITE) with write=1 in gup_pgd_range. Removed FOLL_PIN usage in should_force_cow_break since it's missing in the earlier kernels.] Reported-by:
Jann Horn <jannh@google.com> Tested-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Kirill Shutemov <kirill@shutemov.name> Acked-by:
Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
Suren Baghdasaryan <surenb@google.com> Signed-off-by:
-
Fredrik Strupe authored
commit d2f7eca6 upstream. Since uprobes is not supported for thumb, check that the thumb bit is not set when matching the uprobes instruction hooks. The Arm UDF instructions used for uprobes triggering (UPROBE_SWBP_ARM_INSN and UPROBE_SS_ARM_INSN) coincidentally share the same encoding as a pair of unallocated 32-bit thumb instructions (not UDF) when the condition code is 0b1111 (0xf). This in effect makes it possible to trigger the uprobes functionality from thumb, and at that using two unallocated instructions which are not permanently undefined. Signed-off-by:
Fredrik Strupe <fredrik@strupe.net> Cc: stable@vger.kernel.org Fixes: c7edc9e3 ("ARM: add uprobes support") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
[ Upstream commit 30e3b4f2 ] Since commit 30fdfb92 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()"), the PCI code will call the IRQ mapping function whenever a PCI driver is probed. If these are marked as __init, this causes an oops if a PCI driver is loaded or bound after the kernel has initialised. Fixes: 30fdfb92 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()") Signed-off-by:
-
Lijun Pan authored
commit 7c451f3e upstream. Remove the unnecessary napi_schedule() call in __ibmvnic_open() since interrupt_rx() calls napi_schedule_prep/__napi_schedule during every receive interrupt. Fixes: ed651a10 ("ibmvnic: Updated reset handling") Signed-off-by:
Lijun Pan <lijunp213@gmail.com> Signed-off-by:
-
Lijun Pan authored
commit d3a6abcc upstream. During adapter reset, do_reset/do_hard_reset calls ibmvnic_open(), which will calls napi_schedule if previous state is VNIC_CLOSED (i.e, the reset case, and "ifconfig down" case). So there is no need for do_reset to call napi_schedule again at the end of the function though napi_schedule will neglect the request if napi is already scheduled. Fixes: ed651a10 ("ibmvnic: Updated reset handling") Signed-off-by:
-
Lijun Pan authored
commit 0775ebc4 upstream. __ibmvnic_open calls napi_disable without checking whether NAPI polling has already been disabled or not. This could cause napi_disable being called twice, which could generate deadlock. For example, the first napi_disable will spin until NAPI_STATE_SCHED is cleared by napi_complete_done, then set it again. When napi_disable is called the second time, it will loop infinitely because no dev->poll will be running to clear NAPI_STATE_SCHED. To prevent above scenario from happening, call ibmvnic_napi_disable() which checks if napi is disabled or not before calling napi_disable. Fixes: bfc32f29 ("ibmvnic: Move resource initialization to its own routine") Suggested-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Jason Xing authored
commit 4e39a072 upstream. Fix this panic by adding more rules to calculate the value of @rss_size_max which could be used in allocating the queues when bpf is loaded, which, however, could cause the failure and then trigger the NULL pointer of vsi->rx_rings. Prio to this fix, the machine doesn't care about how many cpus are online and then allocates 256 queues on the machine with 32 cpus online actually. Once the load of bpf begins, the log will go like this "failed to get tracking for 256 queues for VSI 0 err -12" and this "setup of MAIN VSI failed". Thus, I attach the key information of the crash-log here. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 0010:i40e_xdp+0xdd/0x1b0 [i40e] Call Trace: [2160294.717292] ? i40e_reconfig_rss_queues+0x170/0x170 [i40e] [2160294.717666] dev_xdp_install+0x4f/0x70 [2160294.718036] dev_change_xdp_fd+0x11f/0x230 [2160294.718380] ? dev_disable_lro+0xe0/0xe0 [2160294.718705] do_setlink+0xac7/0xe70 [2160294.719035] ? __nla_parse+0xed/0x120 [2160294.719365] rtnl_newlink+0x73b/0x860 Fixes: 41c445ff ("i40e: main driver core") Co-developed-by:
Shujin Li <lishujin@kuaishou.com> Signed-off-by:
Jason Xing <xingwanli@kuaishou.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Hristo Venev authored
commit 610f8c0f upstream. A sit interface created without a local or a remote address is linked into the `sit_net::tunnels_wc` list of its original namespace. When deleting a network namespace, delete the devices that have been moved. The following script triggers a null pointer dereference if devices linked in a deleted `sit_net` remain: for i in `seq 1 30`; do ip netns add ns-test ip netns exec ns-test ip link add dev veth0 type veth peer veth1 ip netns exec ns-test ip link add dev sit$i type sit dev veth0 ip netns exec ns-test ip link set dev sit$i netns $$ ip netns del ns-test done for i in `seq 1 30`; do ip link del dev sit$i done Fixes: 5e6700b3 ("sit: add support of x-netns") Signed-off-by:
Hristo Venev <hristo@venev.name> Signed-off-by:
-
Christophe JAILLET authored
commit 31457db3 upstream. When the probe fails, we must disable the regulator that was previously enabled. This patch is a follow-up to commit ac88c531 ("net: davicom: Fix regulator not turned off on failed probe") which missed one case. Fixes: 7994fe55 ("dm9000: Add regulator and reset support to dm9000") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Eric Dumazet authored
commit b895bdf5 upstream. div_u64() divides u64 by u32. nft_limit_init() wants to divide u64 by u64, use the appropriate math function (div64_u64) divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8390 Comm: syz-executor188 Not tainted 5.12.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:div_u64_rem include/linux/math64.h:28 [inline] RIP: 0010:div_u64 include/linux/math64.h:127 [inline] RIP: 0010:nft_limit_init+0x2a2/0x5e0 net/netfilter/nft_limit.c:85 Code: ef 4c 01 eb 41 0f 92 c7 48 89 de e8 38 a5 22 fa 4d 85 ff 0f 85 97 02 00 00 e8 ea 9e 22 fa 4c 0f af f3 45 89 ed 31 d2 4c 89 f0 <49> f7 f5 49 89 c6 e8 d3 9e 22 fa 48 8d 7d 48 48 b8 00 00 00 00 00 RSP: 0018:ffffc90009447198 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000200000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff875152e6 RDI: 0000000000000003 RBP: ffff888020f80908 R08: 0000200000000000 R09: 0000000000000000 R10: ffffffff875152d8 R11: 0000000000000000 R12: ffffc90009447270 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 000000000097a300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c4 CR3: 0000000026a52000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: nf_tables_newexpr net/netfilter/nf_tables_api.c:2675 [inline] nft_expr_init+0x145/0x2d0 net/netfilter/nf_tables_api.c:2713 nft_set_elem_expr_alloc+0x27/0x280 net/netfilter/nf_tables_api.c:5160 nf_tables_newset+0x1997/0x3150 net/netfilter/nf_tables_api.c:4321 nfnetlink_rcv_batch+0x85a/0x21b0 net/netfilter/nfnetlink.c:456 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:580 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:598 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: c26844ed ("netfilter: nf_tables: Fix nft limit burst handling") Fixes: 3e0f64b7 ("netfilter: nft_limit: fix packet ratelimiting") Signed-off-by:
Luigi Rizzo <lrizzo@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
commit fbea3180 upstream. /proc/net/nf_conntrack shows icmpv6 as unknown. Fixes: 09ec82f5 ("netfilter: conntrack: remove protocol name from l4proto struct") Signed-off-by:
-
Jolly Shah authored
commit 176ddd89 upstream. When the cache_type for the SCSI device is changed, the SCSI layer issues a MODE_SELECT command. The caching mode details are communicated via a request buffer associated with the SCSI command with data direction set as DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata layer, as a part of generic initial setup, libata layer sets up the scatterlist for the command using the SCSI command (ata_scsi_qc_new()). This command is then translated by the libata layer into ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats this as a non-data command (ata_mselect_caching()), since it only needs an ATA taskfile to pass the caching on/off information to the device. It does not need the scatterlist that has been setup, so it does not perform dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it as a non-data command with a scatterlist. It cannot extract the correct DMA length since the scatterlist has not been mapped with dma_map_sg() for a DMA operation. When this partially constructed SAS task reaches pm80xx LLDD, it results in the following warning: "pm80xx_chip_sata_req 6058: The sg list address start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff end_addr_low=0xffffffff has crossed 4G boundary" Update libsas to handle ATA non-data commands separately so num_scatter and total_xfer_len remain 0. Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com Fixes: 53de092f ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA") Tested-by:
Luo Jiaxing <luojiaxing@huawei.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Jolly Shah <jollys@google.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Nathan Chancellor authored
commit 22315a22 upstream. After commit 2decad92 ("arm64: mte: Ensure TIF_MTE_ASYNC_FAULT is set atomically"), LLVM's integrated assembler fails to build entry.S: <instantiation>:5:7: error: expected assembly-time absolute expression .org . - (664b-663b) + (662b-661b) ^ <instantiation>:6:7: error: expected assembly-time absolute expression .org . - (662b-661b) + (664b-663b) ^ The root cause is LLVM's assembler has a one-pass design, meaning it cannot figure out these instruction lengths when the .org directive is outside of the subsection that they are in, which was changed by the .arch_extension directive added in the above commit. Apply the same fix from commit 966a0acc ("arm64/alternatives: move length validation inside the subsection") to the alternative_endif macro, shuffling the .org directives so that the length validation happen will always happen in the same subsections. alternative_insn has not shown any issue yet but it appears that it could have the same issue in the future so just preemptively change it. Fixes: f7b93d42 ("arm64/alternatives: use subsections for replacement sequences") Cc: <stable@vger.kernel.org> # 5.8.x Link: https://github.com/ClangBuiltLinux/linux/issues/1347 Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Sami Tolvanen <samitolvanen@google.com> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Tested-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Peter Collingbourne authored
commit 185f2e5f upstream. The inline asm's addr operand is marked as input-only, however in the case where an exception is taken it may be modified by the BIC instruction on the exception path. Fix the problem by using a temporary register as the destination register for the BIC instruction. Signed-off-by:
Peter Collingbourne <pcc@google.com> Cc: stable@vger.kernel.org Link: https://linux-review.googlesource.com/id/I84538c8a2307d567b4f45bb20b715451005f9617 Link: https://lore.kernel.org/r/20210401165110.3952103-1-pcc@google.com Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Linus Torvalds authored
commit 0c93ac69 upstream. This does the directory entry name verification for the legacy "fillonedir" (and compat) interface that goes all the way back to the dark ages before we had a proper dirent, and the readdir() system call returned just a single entry at a time. Nobody should use this interface unless you still have binaries from 1991, but let's do it right. This came up during discussions about unsafe_copy_to_user() and proper checking of all the inputs to it, as the networking layer is looking to use it in a few new places. So let's make sure the _old_ users do it all right and proper, before we add new ones. See also commit 8a23eb80 ("Make filldir[64]() verify the directory entry filename is valid") which did the proper modern interfaces that people actually use. It had a note: Note that I didn't bother adding the checks to any legacy interfaces that nobody uses. which this now corrects. Note that we really don't care about POSIX and the presense of '/' in a directory entry, but verify_dirent_name() also ends up doing the proper name length verification which is what the input checking discussion was about. [ Another option would be to remove the support for this particular very old interface: any binaries that use it are likely a.out binaries, and they will no longer run anyway since we removed a.out binftm support in commit eac61655 ("x86: Deprecate a.out support"). But I'm not sure which came first: getdents() or ELF support, so let's pretend somebody might still have a working binary that uses the legacy readdir() case.. ] Link: https://lore.kernel.org/lkml/CAHk-=wjbvzCAhAtvG0d81W5o0-KT5PPTHhfJ5ieDFq+bGtgOYg@mail.gmail.com/ Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Ping Cheng authored
commit 276559d8 upstream. Valid HID_GENERIC type of devices set EV_KEY and EV_ABS by wacom_map_usage. When *_input_capabilities are reached, those devices should already have their proper EV_* set. EV_KEY and EV_ABS only need to be set for non-HID_GENERIC type of devices in *_input_capabilities. Devices that don't support HID descitoprs will pass back to hid-input for registration without being accidentally rejected by the introduction of patch: "Input: refuse to register absolute devices without absinfo" Fixes: 6ecfe51b ("Input: refuse to register absolute devices without absinfo") Signed-off-by:
Ping Cheng <ping.cheng@wacom.com> Reviewed-by:
Jason Gerecke <Jason.Gerecke@wacom.com> Tested-by:
Juan Garrido <Juan.Garrido@wacom.com> CC: stable@vger.kernel.org Signed-off-by:
-
Arnd Bergmann authored
commit daa58c8e upstream. The Zenbook Flip entry that was added overwrites a previous one because of a typo: In file included from drivers/input/serio/i8042.h:23, from drivers/input/serio/i8042.c:131: drivers/input/serio/i8042-x86ia64io.h:591:28: error: initialized field overwritten [-Werror=override-init] 591 | .matches = { | ^ drivers/input/serio/i8042-x86ia64io.h:591:28: note: (near initialization for 'i8042_dmi_noselftest_table[0].matches') Add the missing separator between the two. Fixes: b5d6e7ab ("Input: i8042 - add ASUS Zenbook Flip to noselftest list") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Marcos Paulo de Souza <mpdesouza@suse.com> Link: https://lore.kernel.org/r/20210323130623.2302402-1-arnd@kernel.org Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Seevalamuthu Mariappan authored
[ Upstream commit dd0b4553 ] In some race conditions, with more clients and traffic configuration, below crash is seen when making the interface down. sta->fast_rx wasn't cleared when STA gets removed from 4-addr AP_VLAN interface. The crash is due to try accessing 4-addr AP_VLAN interface's net_device (fast_rx->dev) which has been deleted already. Resolve this by clearing sta->fast_rx pointer when STA removes from a 4-addr VLAN. [ 239.449529] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 239.449531] pgd = 80204000 ... [ 239.481496] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.60 #227 [ 239.481591] Hardware name: Generic DT based system [ 239.487665] task: be05b700 ti: be08e000 task.ti: be08e000 [ 239.492360] PC is at get_rps_cpu+0x2d4/0x31c [ 239.497823] LR is at 0xbe08fc54 ... [ 239.778574] [<80739740>] (get_rps_cpu) from [<8073cb10>] (netif_receive_skb_internal+0x8c/0xac) [ 239.786722] [<8073cb10>] (netif_receive_skb_internal) from [<8073d578>] (napi_gro_receive+0x48/0xc4) [ 239.795267] [<8073d578>] (napi_gro_receive) from [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames+0xbcc/0x12d4 [mac80211]) [ 239.804776] [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames [mac80211]) from [<c7b84d4c>] (ieee80211_rx_napi+0x7b8/0x8c8 [mac8 0211]) [ 239.815857] [<c7b84d4c>] (ieee80211_rx_napi [mac80211]) from [<c7f63d7c>] (ath11k_dp_process_rx+0x7bc/0x8c8 [ath11k]) [ 239.827757] [<c7f63d7c>] (ath11k_dp_process_rx [ath11k]) from [<c7f5b6c4>] (ath11k_dp_service_srng+0x2c0/0x2e0 [ath11k]) [ 239.838484] [<c7f5b6c4>] (ath11k_dp_service_srng [ath11k]) from [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll+0x20/0x84 [ath11k_ahb] ) [ 239.849419] [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll [ath11k_ahb]) from [<8073ce1c>] (net_rx_action+0xe0/0x28c) [ 239.860945] [<8073ce1c>] (net_rx_action) from [<80324868>] (__do_softirq+0xe4/0x228) [ 239.871269] [<80324868>] (__do_softirq) from [<80324c48>] (irq_exit+0x98/0x108) [ 239.879080] [<80324c48>] (irq_exit) from [<8035c59c>] (__handle_domain_irq+0x90/0xb4) [ 239.886114] [<8035c59c>] (__handle_domain_irq) from [<8030137c>] (gic_handle_irq+0x50/0x94) [ 239.894100] [<8030137c>] (gic_handle_irq) from [<803024c0>] (__irq_svc+0x40/0x74) Signed-off-by:
Seevalamuthu Mariappan <seevalam@codeaurora.org> Link: https://lore.kernel.org/r/1616163532-3881-1-git-send-email-seevalam@codeaurora.org Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Colin Ian King authored
commit 9858af27 upstream. Currently udc->ud.tcp_rx is being assigned twice, the second assignment is incorrect, it should be to udc->ud.tcp_tx instead of rx. Fix this. Fixes: 46613c9d ("usbip: fix vudc usbip_sockfd_store races leading to gpf") Acked-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20210311104445.7811-1-colin.king@canonical.com Signed-off-by:
Tom Seewald <tseewald@gmail.com> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 66c3f05d ] pci_resource_start() is not a good indicator to determine if a PCI resource exists or not, since the resource may start at address 0. This is seen when trying to instantiate the driver in qemu for riscv32 or riscv64. pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000001f] ... pcnet32: card has no PCI IO resources, aborting Use pci_resouce_len() instead. Signed-off-by:
-
Alexander Aring authored
[ Upstream commit 9ec87e32 ] This patch forbids to add llsec seclevel for monitor interfaces which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors. Signed-off-by:
Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210405003054.256017-14-aahringo@redhat.com Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Alexander Aring authored
[ Upstream commit 4c9b4f55 ] This patch stops dumping llsec seclevels for monitors which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors. Signed-off-by:
-
Alexander Aring authored
[ Upstream commit a347b3b3 ] This patch forbids to add llsec devkey for monitor interfaces which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors. Signed-off-by:
-
Alexander Aring authored
[ Upstream commit 080d1a57 ] This patch stops dumping llsec devkeys for monitors which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors. Signed-off-by:
-
