- 18 Aug, 2021 40 commits
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20210816125434.948010115@linuxfoundation.org Link: https://lore.kernel.org/r/20210816171400.936235973@linuxfoundation.org Tested-by:
Fox Chen <foxhlchen@gmail.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Hulk Robot <hulkrobot@huawei.com> Tested-by:
Pavel Machek (CIP) <pavel@denx.de> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben Hutchings authored
commit 9130c2d3 upstream. On the CPU port, we can support both tagged and untagged VLANs at the same time by doing any necessary untagging in software rather than hardware. To enable that, keep the CPU port's Remove Tag flag cleared and set the dsa_switch::untag_bridge_pvid flag. Fixes: e66f840c ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by:
Ben Hutchings <ben.hutchings@mind.be> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backport to 5.10: adjust context] Signed-off-by:
-
Ben Hutchings authored
commit af01754f upstream. When a VLAN is deleted from a port, the flags in struct switchdev_obj_port_vlan are always 0. ksz8_port_vlan_del() copies the BRIDGE_VLAN_INFO_UNTAGGED flag to the port's Tag Removal flag, and therefore always clears it. In case there are multiple VLANs configured as untagged on this port - which seems useless, but is allowed - deleting one of them changes the remaining VLANs to be tagged. It's only ever necessary to change this flag when a VLAN is added to the port, so leave it unchanged in ksz8_port_vlan_del(). Fixes: e66f840c ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by:
-
Ben Hutchings authored
commit 8f4f58f8 upstream. The switches supported by ksz8795 only have a per-port flag for Tag Removal. This means it is not possible to support both tagged and untagged VLANs on the same port. Reject attempts to add a VLAN that requires the flag to be changed, unless there are no VLANs currently configured. VID 0 is excluded from this check since it is untagged regardless of the state of the flag. On the CPU port we could support tagged and untagged VLANs at the same time. This will be enabled by a later patch. Fixes: e66f840c ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by:
-
Ben Hutchings authored
commit ef3b02a1 upstream. ksz8795 has never actually enabled PVID tag insertion, and it also programmed the PVID incorrectly. To fix this: * Allow tag insertion to be controlled per ingress port. On most chips, set bit 2 in Global Control 19. On KSZ88x3 this control flag doesn't exist. * When adding a PVID: - Set the appropriate register bits to enable tag insertion on egress at every other port if this was the packet's ingress port. - Mask *out* the VID from the default tag, before or-ing in the new PVID. * When removing a PVID: - Clear the same control bits to disable tag insertion. - Don't update the default tag. This wasn't doing anything useful. Fixes: e66f840c ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by:
-
Ben Hutchings authored
The ksz8795 and ksz9477 drivers differ in the way they count ports. For ksz8795, ksz_device::port_cnt does not include the host port whereas for ksz9477 it does. This inconsistency was fixed in Linux 5.11 by a series of changes, but remains in 5.10-stable. When probing, the common code treats a port device node with an address >= dev->port_cnt as a fatal error. As a minimal fix, change it to compare again dev->mib_port_cnt. This is the length of the dev->ports array that the port number will be used to index, and always includes the host port. Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Signed-off-by:
-
Maxim Levitsky authored
commit c7dfa400 upstream. If L1 disables VMLOAD/VMSAVE intercepts, and doesn't enable Virtual VMLOAD/VMSAVE (currently not supported for the nested hypervisor), then VMLOAD/VMSAVE must operate on the L1 physical memory, which is only possible by making L0 intercept these instructions. Failure to do so allowed the nested guest to run VMLOAD/VMSAVE unintercepted, and thus read/write portions of the host physical memory. Fixes: 89c8a498 ("KVM: SVM: Enable Virtual VMLOAD VMSAVE feature") Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Maxim Levitsky authored
commit 0f923e07 upstream. * Invert the mask of bits that we pick from L2 in nested_vmcb02_prepare_control * Invert and explicitly use VIRQ related bits bitmask in svm_clear_vintr This fixes a security issue that allowed a malicious L1 to run L2 with AVIC enabled, which allowed the L2 to exploit the uninitialized and enabled AVIC to read/write the host physical memory at some offsets. Fixes: 3d6368ef ("KVM: SVM: Add VMRUN handler") Signed-off-by:
-
Nathan Chancellor authored
commit 84837881 upstream. A recent change in LLVM causes module_{c,d}tor sections to appear when CONFIG_K{A,C}SAN are enabled, which results in orphan section warnings because these are not handled anywhere: ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_ctor) is being placed in '.text.asan.module_ctor' ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_dtor) is being placed in '.text.asan.module_dtor' ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.tsan.module_ctor) is being placed in '.text.tsan.module_ctor' Fangrui explains: "the function asan.module_ctor has the SHF_GNU_RETAIN flag, so it is in a separate section even with -fno-function-sections (default)". Place them in the TEXT_TEXT section so that these technologies continue to work with the newer compiler versions. All of the KASAN and KCSAN KUnit tests continue to pass after this change. Cc: stable@vger.kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/1432 Link: https://github.com/llvm/llvm-project/commit/7b789562244ee941b7bf2cefeb3fc08a59a01865 Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Fangrui Song <maskray@google.com> Acked-by:
Marco Elver <elver@google.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210731023107.1932981-1-nathan@kernel.org [nc: Resolve conflict due to lack of cf68fffb ] Signed-off-by:
-
Jeff Layton authored
commit 8434ffe7 upstream. There is a race in ceph_put_snap_realm. The change to the nref and the spinlock acquisition are not done atomically, so you could decrement nref, and before you take the spinlock, the nref is incremented again. At that point, you end up putting it on the empty list when it shouldn't be there. Eventually __cleanup_empty_realms runs and frees it when it's still in-use. Fix this by protecting the 1->0 transition with atomic_dec_and_lock, and just drop the spinlock if we can get the rwsem. Because these objects can also undergo a 0->1 refcount transition, we must protect that change as well with the spinlock. Increment locklessly unless the value is at 0, in which case we take the spinlock, increment and then take it off the empty list if it did the 0->1 transition. With these changes, I'm removing the dout() messages from these functions, as well as in __put_snap_realm. They've always been racy, and it's better to not print values that may be misleading. Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/46419 Reported-by:
Mark Nelson <mnelson@redhat.com> Signed-off-by:
Jeff Layton <jlayton@kernel.org> Reviewed-by:
Luis Henriques <lhenriques@suse.de> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Jeff Layton authored
commit df2c0cb7 upstream. They both say that the snap_rwsem must be held for write, but I don't see any real reason for it, and it's not currently always called that way. The lookup is just walking the rbtree, so holding it for read should be fine there. The "get" is bumping the refcount and (possibly) removing it from the empty list. I see no need to hold the snap_rwsem for write for that. Signed-off-by:
-
Jeff Layton authored
commit a6862e67 upstream. Turn some comments into lockdep asserts. Signed-off-by:
-
Hans de Goede authored
commit 52dfd86a upstream. Opening a new file is done in 2 steps on regular filesystems: 1. Call the create inode-op on the parent-dir to create an inode to hold the meta-data related to the file. 2. Call the open file-op to get a handle for the file. vboxsf however does not really use disk-backed inodes because it is based on passing through file-related system-calls through to the hypervisor. So both steps translate to an open(2) call being passed through to the hypervisor. With the handle returned by the first call immediately being closed again. Making 2 open calls for a single open(..., O_CREATE, ...) calls has 2 problems: a) It is not really efficient. b) It actually breaks some apps. An example of b) is doing a git clone inside a vboxsf mount. When git clone tries to create a tempfile to store the pak files which is downloading the following happens: 1. vboxsf_dir_mkfile() gets called with a mode of 0444 and succeeds. 2. vboxsf_file_open() gets called with file->f_flags containing O_RDWR. When the host is a Linux machine this fails because doing a open(..., O_RDWR) on a file which exists and has mode 0444 results in an -EPERM error. Other network-filesystems and fuse avoid the problem of needing to pass 2 open() calls to the other side by using the atomic_open directory-inode op. This commit fixes git clone not working inside a vboxsf mount, by adding support for the atomic_open directory-inode op. As an added bonus this should also make opening new files faster. The atomic_open implementation is modelled after the atomic_open implementations from the 9p and fuse code. Fixes: 0fd16957 ("fs: Add VirtualBox guest shared folder (vboxsf) support") Reported-by:
Ludovic Pouzenc <bugreports@pouzenc.fr> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit 02f840f9 upstream. Factor out the code to create / release a struct vboxsf_handle into 2 new helper functions. This is a preparation patch for adding atomic_open support. Fixes: 0fd16957 ("fs: Add VirtualBox guest shared folder (vboxsf) support") Signed-off-by:
-
Sean Christopherson authored
commit 18712c13 upstream. Use vmx_need_pf_intercept() when determining if L0 wants to handle a #PF in L2 or if the VM-Exit should be forwarded to L1. The current logic fails to account for the case where #PF is intercepted to handle guest.MAXPHYADDR < host.MAXPHYADDR and ends up reflecting all #PFs into L1. At best, L1 will complain and inject the #PF back into L2. At worst, L1 will eat the unexpected fault and cause L2 to hang on infinite page faults. Note, while the bug was technically introduced by the commit that added support for the MAXPHYADDR madness, the shame is all on commit a0c13434 ("KVM: VMX: introduce vmx_need_pf_intercept"). Fixes: 1dbf5d68 ("KVM: VMX: Add guest physical address check in EPT violation and misconfig") Cc: stable@vger.kernel.org Cc: Peter Shier <pshier@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20210812045615.3167686-1-seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
commit 7b9cae02 upstream. Use the secondary_exec_controls_get() accessor in vmx_has_waitpkg() to effectively get the controls for the current VMCS, as opposed to using vmx->secondary_exec_controls, which is the cached value of KVM's desired controls for vmcs01 and truly not reflective of any particular VMCS. While the waitpkg control is not dynamic, i.e. vmcs01 will always hold the same waitpkg configuration as vmx->secondary_exec_controls, the same does not hold true for vmcs02 if the L1 VMM hides the feature from L2. If L1 hides the feature _and_ does not intercept MSR_IA32_UMWAIT_CONTROL, L2 could incorrectly read/write L1's virtual MSR instead of taking a #GP. Fixes: 6e3ba4ab ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL") Cc: stable@vger.kernel.org Signed-off-by:
-
Ard Biesheuvel authored
commit c32ac11d upstream. On arm64, the stub only moves the kernel image around in memory if needed, which is typically only for KASLR, given that relocatable kernels (which is the default) can run from any 64k aligned address, which is also the minimum alignment communicated to EFI via the PE/COFF header. Unfortunately, some loaders appear to ignore this header, and load the kernel at some arbitrary offset in memory. We can deal with this, but let's check for this condition anyway, so non-compliant code can be spotted and fixed. Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Tested-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Christophe Leroy authored
commit 82414615 upstream. Running an SMP kernel on an UP platform not prepared for it, I encountered the following OOPS: BUG: Kernel NULL pointer dereference on read at 0x00000034 Faulting instruction address: 0xc0a04110 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K SMP NR_CPUS=2 CMPCPRO Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-pmac-00001-g230fedfaad21 #5234 NIP: c0a04110 LR: c0a040d8 CTR: c0a04084 REGS: e100dda0 TRAP: 0300 Not tainted (5.13.0-pmac-00001-g230fedfaad21) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 84000284 XER: 00000000 DAR: 00000034 DSISR: 20000000 GPR00: c0006bd4 e100de60 c1033320 00000000 00000000 c0942274 00000000 00000000 GPR08: 00000000 00000000 00000001 00000063 00000007 00000000 c0006f30 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000005 GPR24: c0c67d74 c0c67f1c c0c60000 c0c67d70 c0c0c558 1efdf000 c0c00020 00000000 NIP [c0a04110] topology_init+0x8c/0x138 LR [c0a040d8] topology_init+0x54/0x138 Call Trace: [e100de60] [80808080] 0x80808080 (unreliable) [e100de90] [c0006bd4] do_one_initcall+0x48/0x1bc [e100def0] [c0a0150c] kernel_init_freeable+0x1c8/0x278 [e100df20] [c0006f44] kernel_init+0x14/0x10c [e100df30] [c00190fc] ret_from_kernel_thread+0x14/0x1c Instruction dump: 7c692e70 7d290194 7c035040 7c7f1b78 5529103a 546706fe 5468103a 39400001 7c641b78 40800054 80c690b4 7fb9402e <81060034> 7fbeea14 2c080000 7fa3eb78 ---[ end trace b246ffbc6bbbb6fb ]--- Fix it by checking smp_ops before using it, as already done in several other places in the arch/powerpc/kernel/smp.c Fixes: 39f87561 ("powerpc/smp: Move ppc_md.cpu_die() to smp_ops.cpu_offline_self()") Cc: stable@vger.kernel.org Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/75287841cbb8740edd44880fe60be66d489160d9.1628097995.git.christophe.leroy@csgroup.eu Signed-off-by:
-
Thomas Gleixner authored
commit 77e89afc upstream. Multi-MSI uses a single MSI descriptor and there is a single mask register when the device supports per vector masking. To avoid reading back the mask register the value is cached in the MSI descriptor and updates are done by clearing and setting bits in the cache and writing it to the device. But nothing protects msi_desc::masked and the mask register from being modified concurrently on two different CPUs for two different Linux interrupts which belong to the same multi-MSI descriptor. Add a lock to struct device and protect any operation on the mask and the mask register with it. This makes the update of msi_desc::masked unconditional, but there is no place which requires a modification of the hardware register without updating the masked cache. msi_mask_irq() is now an empty wrapper which will be cleaned up in follow up changes. The problem goes way back to the initial support of multi-MSI, but picking the commit which introduced the mask cache is a valid cut off point (2.6.30). Fixes: f2440d9a ("PCI MSI: Refactor interrupt masking code") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
-
Thomas Gleixner authored
commit d28d4ad2 upstream. No point in using the raw write function from shutdown. Preparatory change to introduce proper serialization for the msi_desc::masked cache. Signed-off-by:
-
Thomas Gleixner authored
commit 689e6b53 upstream. The comments about preserving the cached state in pci_msi[x]_shutdown() are misleading as the MSI descriptors are freed right after those functions return. So there is nothing to restore. Preparatory change. Signed-off-by:
-
Thomas Gleixner authored
commit 361fd373 upstream. msi_mask_irq() takes a mask and a flags argument. The mask argument is used to mask out bits from the cached mask and the flags argument to set bits. Some places invoke it with a flags argument which sets bits which are not used by the device, i.e. when the device supports up to 8 vectors a full unmask in some places sets the mask to 0xFFFFFF00. While devices probably do not care, it's still bad practice. Fixes: 7ba1930d ("PCI MSI: Unmask MSI if setup failed") Signed-off-by:
-
Thomas Gleixner authored
commit b9255a7c upstream. Nothing enforces the posted writes to be visible when the function returns. Flush them even if the flush might be redundant when the entry is masked already as the unmask will flush as well. This is either setup or a rare affinity change event so the extra flush is not the end of the world. While this is more a theoretical issue especially the logic in the X86 specific msi_set_affinity() function relies on the assumption that the update has reached the hardware when the function returns. Again, as this never has been enforced the Fixes tag refers to a commit in: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support") Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.515188147@linutronix.de Signed-off-by:
-
Thomas Gleixner authored
commit da181dc9 upstream. The specification (PCIe r5.0, sec 6.1.4.5) states: For MSI-X, a function is permitted to cache Address and Data values from unmasked MSI-X Table entries. However, anytime software unmasks a currently masked MSI-X Table entry either by clearing its Mask bit or by clearing the Function Mask bit, the function must update any Address or Data values that it cached from that entry. If software changes the Address or Data value of an entry while the entry is unmasked, the result is undefined. The Linux kernel's MSI-X support never enforced that the entry is masked before the entry is modified hence the Fixes tag refers to a commit in: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Enforce the entry to be masked across the update. There is no point in enforcing this to be handled at all possible call sites as this is just pointless code duplication and the common update function is the obvious place to enforce this. Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support") Reported-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
-
Thomas Gleixner authored
commit 7d5ec3d3 upstream. When MSI-X is enabled the ordering of calls is: msix_map_region(); msix_setup_entries(); pci_msi_setup_msi_irqs(); msix_program_entries(); This has a few interesting issues: 1) msix_setup_entries() allocates the MSI descriptors and initializes them except for the msi_desc:masked member which is left zero initialized. 2) pci_msi_setup_msi_irqs() allocates the interrupt descriptors and sets up the MSI interrupts which ends up in pci_write_msi_msg() unless the interrupt chip provides its own irq_write_msi_msg() function. 3) msix_program_entries() does not do what the name suggests. It solely updates the entries array (if not NULL) and initializes the masked member for each MSI descriptor by reading the hardware state and then masks the entry. Obviously this has some issues: 1) The uninitialized masked member of msi_desc prevents the enforcement of masking the entry in pci_write_msi_msg() depending on the cached masked bit. Aside of that half initialized data is a NONO in general 2) msix_program_entries() only ensures that the actually allocated entries are masked. This is wrong as experimentation with crash testing and crash kernel kexec has shown. This limited testing unearthed that when the production kernel had more entries in use and unmasked when it crashed and the crash kernel allocated a smaller amount of entries, then a full scan of all entries found unmasked entries which were in use in the production kernel. This is obviously a device or emulation issue as the device reset should mask all MSI-X table entries, but obviously that's just part of the paper specification. Cure this by: 1) Masking all table entries in hardware 2) Initializing msi_desc::masked in msix_setup_entries() 3) Removing the mask dance in msix_program_entries() 4) Renaming msix_program_entries() to msix_update_entries() to reflect the purpose of that function. As the masking of unused entries has never been done the Fixes tag refers to a commit in: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support") Signed-off-by:
-
Thomas Gleixner authored
commit 43855395 upstream. The ordering of MSI-X enable in hardware is dysfunctional: 1) MSI-X is disabled in the control register 2) Various setup functions 3) pci_msi_setup_msi_irqs() is invoked which ends up accessing the MSI-X table entries 4) MSI-X is enabled and masked in the control register with the comment that enabling is required for some hardware to access the MSI-X table Step #4 obviously contradicts #3. The history of this is an issue with the NIU hardware. When #4 was introduced the table access actually happened in msix_program_entries() which was invoked after enabling and masking MSI-X. This was changed in commit d71d6432 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") which removed the table write from msix_program_entries(). Interestingly enough nobody noticed and either NIU still works or it did not get any testing with a kernel 3.19 or later. Nevertheless this is inconsistent and there is no reason why MSI-X can't be enabled and masked in the control register early on, i.e. move step #4 above to step #1. This preserves the NIU workaround and has no side effects on other hardware. Fixes: d71d6432 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") Signed-off-by:
Ashok Raj <ashok.raj@intel.com> Reviewed-by:
-
Ben Dai authored
commit b9cc7d8a upstream. When the interrupt interval is greater than 2 ^ PREDICTION_BUFFER_SIZE * PREDICTION_FACTOR us and less than 1s, the calculated index will be greater than the length of irqs->ema_time[]. Check the calculated index before using it to prevent array overflow. Fixes: 23aa3b9a ("genirq/timings: Encapsulate storing function") Signed-off-by:
Ben Dai <ben.dai@unisoc.com> Signed-off-by:
-
Bixuan Cui authored
commit dbbc9357 upstream. msi_domain_alloc_irqs() invokes irq_domain_activate_irq(), but msi_domain_free_irqs() does not enforce deactivation before tearing down the interrupts. This happens when PCI/MSI interrupts are set up and never used before being torn down again, e.g. in error handling pathes. The only place which cleans that up is the error handling path in msi_domain_alloc_irqs(). Move the cleanup from msi_domain_alloc_irqs() into msi_domain_free_irqs() to cure that. Fixes: f3b0946d ("genirq/msi: Make sure PCI MSIs are activated early") Signed-off-by:
Bixuan Cui <cuibixuan@huawei.com> Signed-off-by:
-
Babu Moger authored
commit 064855a6 upstream. Creating a new sub monitoring group in the root /sys/fs/resctrl leads to getting the "Unavailable" value for mbm_total_bytes and mbm_local_bytes on the entire filesystem. Steps to reproduce: 1. mount -t resctrl resctrl /sys/fs/resctrl/ 2. cd /sys/fs/resctrl/ 3. cat mon_data/mon_L3_00/mbm_total_bytes 23189832 4. Create sub monitor group: mkdir mon_groups/test1 5. cat mon_data/mon_L3_00/mbm_total_bytes Unavailable When a new monitoring group is created, a new RMID is assigned to the new group. But the RMID is not active yet. When the events are read on the new RMID, it is expected to report the status as "Unavailable". When the user reads the events on the default monitoring group with multiple subgroups, the events on all subgroups are consolidated together. Currently, if any of the RMID reads report as "Unavailable", then everything will be reported as "Unavailable". Fix the issue by discarding the "Unavailable" reads and reporting all the successful RMID reads. This is not a problem on Intel systems as Intel reports 0 on Inactive RMIDs. Fixes: d89b7379 ("x86/intel_rdt/cqm: Add mon_data") Reported-by:
Paweł Szulik <pawel.szulik@intel.com> Signed-off-by:
Babu Moger <Babu.Moger@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Reinette Chatre <reinette.chatre@intel.com> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=213311 Link: https://lkml.kernel.org/r/162793309296.9224.15871659871696482080.stgit@bmoger-ubuntu Signed-off-by:
-
Thomas Gleixner authored
commit 0c0e37dc upstream. The IO/APIC cannot handle interrupt affinity changes safely after startup other than from an interrupt handler. The startup sequence in the generic interrupt code violates that assumption. Mark the irq chip with the new IRQCHIP_AFFINITY_PRE_STARTUP flag so that the default interrupt setting happens before the interrupt is started up for the first time. Fixes: 18404756 ("genirq: Expose default irq affinity mask (take 3)") Signed-off-by:
-
Thomas Gleixner authored
commit ff363f48 upstream. The X86 MSI mechanism cannot handle interrupt affinity changes safely after startup other than from an interrupt handler, unless interrupt remapping is enabled. The startup sequence in the generic interrupt code violates that assumption. Mark the irq chips with the new IRQCHIP_AFFINITY_PRE_STARTUP flag so that the default interrupt setting happens before the interrupt is started up for the first time. While the interrupt remapping MSI chip does not require this, there is no point in treating it differently as this might spare an interrupt to a CPU which is not in the default affinity mask. For the non-remapping case go to the direct write path when the interrupt is not yet started similar to the not yet activated case. Fixes: 18404756 ("genirq: Expose default irq affinity mask (take 3)") Signed-off-by:
-
Thomas Gleixner authored
commit 826da771 upstream. X86 IO/APIC and MSI interrupts (when used without interrupts remapping) require that the affinity setup on startup is done before the interrupt is enabled for the first time as the non-remapped operation mode cannot safely migrate enabled interrupts from arbitrary contexts. Provide a new irq chip flag which allows affected hardware to request this. This has to be opt-in because there have been reports in the past that some interrupt chips cannot handle affinity setting before startup. Fixes: 18404756 ("genirq: Expose default irq affinity mask (take 3)") Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 839ad22f ] Skip (omit) any version string info that is parenthesized. Warning: objdump version 15) is older than 2.19 Warning: Skipping posttest. where 'objdump -v' says: GNU objdump (GNU Binutils; SUSE Linux Enterprise 15) 2.35.1.20201123-7.18 Fixes: 8bee738b ("x86: Fix objdump version check in chkobjdump.awk for different formats.") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20210731000146.2720-1-rdunlap@infradead.org Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pu Lehui authored
[ Upstream commit 43e8f760 ] When using kprobe on powerpc booke series processor, Oops happens as show bellow: / # echo "p:myprobe do_nanosleep" > /sys/kernel/debug/tracing/kprobe_events / # echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable / # sleep 1 [ 50.076730] Oops: Exception in kernel mode, sig: 5 [#1] [ 50.077017] BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500 [ 50.077221] Modules linked in: [ 50.077462] CPU: 0 PID: 77 Comm: sleep Not tainted 5.14.0-rc4-00022-g251a1524 #21 [ 50.077887] NIP: c0b9c4e0 LR: c00ebecc CTR: 00000000 [ 50.078067] REGS: c3883de0 TRAP: 0700 Not tainted (5.14.0-rc4-00022-g251a1524) [ 50.078349] MSR: 00029000 <CE,EE,ME> CR: 24000228 XER: 20000000 [ 50.078675] [ 50.078675] GPR00: c00ebdf0 c3883e90 c313e300 c3883ea0 00000001 00000000 c3883ecc 00000001 [ 50.078675] GPR08: c100598c c00ea250 00000004 00000000 24000222 102490c2 bff4180c 101e60d4 [ 50.078675] GPR16: 00000000 102454ac 00000040 10240000 10241100 102410f8 10240000 00500000 [ 50.078675] GPR24: 00000002 00000000 c3883ea0 00000001 00000000 0000c350 3b9b8d50 00000000 [ 50.080151] NIP [c0b9c4e0] do_nanosleep+0x0/0x190 [ 50.080352] LR [c00ebecc] hrtimer_nanosleep+0x14c/0x1e0 [ 50.080638] Call Trace: [ 50.080801] [c3883e90] [c00ebdf0] hrtimer_nanosleep+0x70/0x1e0 (unreliable) [ 50.081110] [c3883f00] [c00ec004] sys_nanosleep_time32+0xa4/0x110 [ 50.081336] [c3883f40] [c001509c] ret_from_syscall+0x0/0x28 [ 50.081541] --- interrupt: c00 at 0x100a4d08 [ 50.081749] NIP: 100a4d08 LR: 101b5234 CTR: 00000003 [ 50.081931] REGS: c3883f50 TRAP: 0c00 Not tainted (5.14.0-rc4-00022-g251a1524) [ 50.082183] MSR: 0002f902 <CE,EE,PR,FP,ME> CR: 24000222 XER: 00000000 [ 50.082457] [ 50.082457] GPR00: 000000a2 bf980040 1024b4d0 bf980084 bf980084 64000000 00555345 fefefeff [ 50.082457] GPR08: 7f7f7f7f 101e0000 00000069 00000003 28000422 102490c2 bff4180c 101e60d4 [ 50.082457] GPR16: 00000000 102454ac 00000040 10240000 10241100 102410f8 10240000 00500000 [ 50.082457] GPR24: 00000002 bf9803f4 10240000 00000000 00000000 100039e0 00000000 102444e8 [ 50.083789] NIP [100a4d08] 0x100a4d08 [ 50.083917] LR [101b5234] 0x101b5234 [ 50.084042] --- interrupt: c00 [ 50.084238] Instruction dump: [ 50.084483] 4bfffc40 60000000 60000000 60000000 9421fff0 39400402 914200c0 38210010 [ 50.084841] 4bfffc20 00000000 00000000 00000000 <7fe00008> 7c0802a6 7c892378 93c10048 [ 50.085487] ---[ end trace f6fffe98e2fa8f3e ]--- [ 50.085678] Trace/breakpoint trap There is no real mode for booke arch and the MMU translation is always on. The corresponding MSR_IS/MSR_DS bit in booke is used to switch the address space, but not for real mode judgment. Fixes: 21f8b2fa ("powerpc/kprobes: Ignore traps that happened in real mode") Signed-off-by:
Pu Lehui <pulehui@huawei.com> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 3a262423 ] Commit 82046702 ("efi/libstub/arm64: Replace 'preferred' offset with alignment check") simplified the way the stub moves the kernel image around in memory before booting it, given that a relocatable image does not need to be copied to a 2M aligned offset if it was loaded on a 64k boundary by EFI. Commit d32de913 ("efi/arm64: libstub: Deal gracefully with EFI_RNG_PROTOCOL failure") inadvertently defeated this logic by overriding the value of efi_nokaslr if EFI_RNG_PROTOCOL is not available, which was mistaken by the loader logic as an explicit request on the part of the user to disable KASLR and any associated relocation of an Image not loaded on a 2M boundary. So let's reinstate this functionality, by capturing the value of efi_nokaslr at function entry to choose the minimum alignment. Fixes: d32de913 ("efi/arm64: libstub: Deal gracefully with EFI_RNG_PROTOCOL failure") Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 5b94046e ] Distro versions of GRUB replace the usual LoadImage/StartImage calls used to load the kernel image with some local code that fails to honor the allocation requirements described in the PE/COFF header, as it does not account for the image's BSS section at all: it fails to allocate space for it, and fails to zero initialize it. Since the EFI stub itself is allocated in the .init segment, which is in the middle of the image, its BSS section is not impacted by this, and the main consequence of this omission is that the BSS section may overlap with memory regions that are already used by the firmware. So let's warn about this condition, and force image reallocation to occur in this case, which works around the problem. Fixes: 82046702 ("efi/libstub/arm64: Replace 'preferred' offset with alignment check") Signed-off-by:
-
Benjamin Herrenschmidt authored
[ Upstream commit 4152433c ] The EFI stub random allocator used for kaslr on arm64 has a subtle bug. In function get_entry_num_slots() which counts the number of possible allocation "slots" for the image in a given chunk of free EFI memory, "last_slot" can become negative if the chunk is smaller than the requested allocation size. The test "if (first_slot > last_slot)" doesn't catch it because both first_slot and last_slot are unsigned. I chose not to make them signed to avoid problems if this is ever used on architectures where there are meaningful addresses with the top bit set. Instead, fix it with an additional test against the allocation size. This can cause a boot failure in addition to a loss of randomisation due to another bug in the arm64 stub fixed separately. Signed-off-by:
-
Xie Yongji authored
[ Upstream commit cddce011 ] There is a race between iterating over requests in nbd_clear_que() and completing requests in recv_work(), which can lead to double completion of a request. To fix it, flush the recv worker before iterating over the requests and don't abort the completed request while iterating. Fixes: 96d97e17 ("nbd: clear_sock on netlink disconnect") Reported-by:
Jiang Yadong <jiangyadong@bytedance.com> Signed-off-by:
Xie Yongji <xieyongji@bytedance.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20210813151330.96-1-xieyongji@bytedance.com Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Longpeng(Mike) authored
[ Upstream commit 49b0b6ff ] There's a potential deadlock case when remove the vsock device or process the RESET event: vsock_for_each_connected_socket: spin_lock_bh(&vsock_table_lock) ----------- (1) ... virtio_vsock_reset_sock: lock_sock(sk) --------------------- (2) ... spin_unlock_bh(&vsock_table_lock) lock_sock() may do initiative schedule when the 'sk' is owned by other thread at the same time, we would receivce a warning message that "scheduling while atomic". Even worse, if the next task (selected by the scheduler) try to release a 'sk', it need to request vsock_table_lock and the deadlock occur, cause the system into softlockup state. Call trace: queued_spin_lock_slowpath vsock_remove_bound vsock_remove_sock virtio_transport_release __vsock_release vsock_release __sock_release sock_close __fput ____fput So we should not require sk_lock in this case, just like the behavior in vhost_vsock or vmci. Fixes: 0ea9e1d3 ("VSOCK: Introduce virtio_transport.ko") Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Longpeng(Mike) <longpeng2@huawei.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210812053056.1699-1-longpeng2@huawei.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Maximilian Heyne authored
[ Upstream commit 88ca2521 ] There is a TOCTOU issue in set_evtchn_to_irq. Rows in the evtchn_to_irq mapping are lazily allocated in this function. The check whether the row is already present and the row initialization is not synchronized. Two threads can at the same time allocate a new row for evtchn_to_irq and add the irq mapping to the their newly allocated row. One thread will overwrite what the other has set for evtchn_to_irq[row] and therefore the irq mapping is lost. This will trigger a BUG_ON later in bind_evtchn_to_cpu: INFO: pci 0000:1a:15.4: [1d0f:8061] type 00 class 0x010802 INFO: nvme 0000:1a:12.1: enabling device (0000 -> 0002) INFO: nvme nvme77: 1/0/0 default/read/poll queues CRIT: kernel BUG at drivers/xen/events/events_base.c:427! WARN: invalid opcode: 0000 [#1] SMP NOPTI WARN: Workqueue: nvme-reset-wq nvme_reset_work [nvme] WARN: RIP: e030:bind_evtchn_to_cpu+0xc2/0xd0 WARN: Call Trace: WARN: set_affinity_irq+0x121/0x150 WARN: irq_do_set_affinity+0x37/0xe0 WARN: irq_setup_affinity+0xf6/0x170 WARN: irq_startup+0x64/0xe0 WARN: __setup_irq+0x69e/0x740 WARN: ? request_threaded_irq+0xad/0x160 WARN: request_threaded_irq+0xf5/0x160 WARN: ? nvme_timeout+0x2f0/0x2f0 [nvme] WARN: pci_request_irq+0xa9/0xf0 WARN: ? pci_alloc_irq_vectors_affinity+0xbb/0x130 WARN: queue_request_irq+0x4c/0x70 [nvme] WARN: nvme_reset_work+0x82d/0x1550 [nvme] WARN: ? check_preempt_wakeup+0x14f/0x230 WARN: ? check_preempt_curr+0x29/0x80 WARN: ? nvme_irq_check+0x30/0x30 [nvme] WARN: process_one_work+0x18e/0x3c0 WARN: worker_thread+0x30/0x3a0 WARN: ? process_one_work+0x3c0/0x3c0 WARN: kthread+0x113/0x130 WARN: ? kthread_park+0x90/0x90 WARN: ret_from_fork+0x3a/0x50 This patch sets evtchn_to_irq rows via a cmpxchg operation so that they will be set only once. The row is now cleared before writing it to evtchn_to_irq in order to not create a race once the row is visible for other threads. While at it, do not require the page to be zeroed, because it will be overwritten with -1's in clear_evtchn_to_irq_row anyway. Signed-off-by:
Maximilian Heyne <mheyne@amazon.de> Fixes: d0b075ff ("xen/events: Refactor evtchn_to_irq array to be dynamically allocated") Link: https://lore.kernel.org/r/20210812130930.127134-1-mheyne@amazon.de Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
