- 22 Sep, 2021 40 commits
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20210920163921.633181900@linuxfoundation.org Tested-by:
Fox Chen <foxhlchen@gmail.com> Tested-by:
Justin M. Forbes <jforbes@fedoraproject.org> Tested-by:
Salvatore Bonaccorso <carnil@debian.org> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Rudi Heitbaum <rudi@heitbaum.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ilya Leoshkevich authored
commit 1511df6f upstream. EMIT6_PCREL() macro assumes that the previous pass generated 6 bytes of code, which is not the case if branch shortening took place. Fix by using jit->prg, like all the other EMIT6_PCREL_*() macros. Reported-by:
Johan Almbladh <johan.almbladh@anyfinetworks.com> Fixes: 4e9b4a68 ("s390/bpf: Use relative long branches") Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Ilya Leoshkevich authored
commit 6e61dc9d upstream. The JIT uses agfi for subtracting constants, but -(-0x80000000) cannot be represented as a 32-bit signed binary integer. Fix by using algfi in this particular case. Reported-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
-
Ilya Leoshkevich authored
commit db7bee65 upstream. Currently the JIT completely removes things like `reg32 += 0`, however, the BPF_ALU semantics requires the target register to be zero-extended in such cases. Fix by optimizing out only the arithmetic operation, but not the subsequent zero-extension. Reported-by:
-
Florian Fainelli authored
commit 02319bf1 upstream. After d12e1c46 ("net: dsa: b53: Set correct number of ports in the DSA struct") we stopped setting dsa_switch::num_ports to DSA_MAX_PORTS, which created an off by one error between the statically allocated bcm_sf2_priv::port_sts array (of size DSA_MAX_PORTS). When dsa_is_cpu_port() is used, we end-up accessing an out of bounds member and causing a NPD. Fix this by iterating with the appropriate port count using ds->num_ports. Fixes: d12e1c46 ("net: dsa: b53: Set correct number of ports in the DSA struct") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Michael Chan authored
commit eca4cf12 upstream. The recent patch has introduced a regression by not reading the reset count in the ERROR_RECOVERY async event handler. We may have just gone through a reset and the reset count has just incremented. If we don't update the reset count in the ERROR_RECOVERY event handler, the health check timer will see that the reset count has changed and will initiate an unintended reset. Restore the unconditional update of the reset count in bnxt_async_event_process() if error recovery watchdog is enabled. Also, update the reset count at the end of the reset sequence to make it even more robust. Fixes: 1b2b9183 ("bnxt_en: Fix possible unintended driver initiated error recovery") Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit 0341d5e3 ] The cur_tx counter must be incremented after TACT bit of txdesc->status was set. However, a CPU is possible to reorder instructions and/or memory accesses between cur_tx and txdesc->status. And then, if TX interrupt happened at such a timing, the sh_eth_tx_free() may free the descriptor wrongly. So, add wmb() before cur_tx++. Otherwise NETDEV WATCHDOG timeout is possible to happen. Fixes: 86a74ff2 ("net: sh_eth: add support for Renesas SuperH Ethernet") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Heiner Kallweit authored
[ Upstream commit be27a47a ] When removing the driver module w/o bringing an interface up before the error below occurs. Reason seems to be that cancel_work_sync() is called in t3_sge_stop() for a queue that hasn't been initialized yet. [10085.941785] ------------[ cut here ]------------ [10085.941799] WARNING: CPU: 1 PID: 5850 at kernel/workqueue.c:3074 __flush_work+0x3ff/0x480 [10085.941819] Modules linked in: vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio led_class ee1004 iTCO_ wdt intel_tcc_cooling x86_pkg_temp_thermal coretemp aesni_intel crypto_simd cryptd snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core r 8169 snd_pcm realtek mdio_devres snd_timer snd i2c_i801 i2c_smbus libphy i915 i2c_algo_bit cxgb3(-) intel_gtt ttm mdio drm_kms_helper mei_me s yscopyarea sysfillrect sysimgblt mei fb_sys_fops acpi_pad sch_fq_codel crypto_user drm efivarfs ext4 mbcache jbd2 crc32c_intel [10085.941944] CPU: 1 PID: 5850 Comm: rmmod Not tainted 5.14.0-rc7-next-20210826+ #6 [10085.941974] Hardware name: System manufacturer System Product Name/PRIME H310I-PLUS, BIOS 2603 10/21/2019 [10085.941992] RIP: 0010:__flush_work+0x3ff/0x480 [10085.942003] Code: c0 74 6b 65 ff 0d d1 bd 78 75 e8 bc 2f 06 00 48 c7 c6 68 b1 88 8a 48 c7 c7 e0 5f b4 8b 45 31 ff e8 e6 66 04 00 e9 4b fe ff ff <0f> 0b 45 31 ff e9 41 fe ff ff e8 72 c1 79 00 85 c0 74 87 80 3d 22 [10085.942036] RSP: 0018:ffffa1744383fc08 EFLAGS: 00010246 [10085.942048] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000923 [10085.942062] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff91c901710a88 [10085.942076] RBP: ffffa1744383fce8 R08: 0000000000000001 R09: 0000000000000001 [10085.942090] R10: 00000000000000c2 R11: 0000000000000000 R12: ffff91c901710a88 [10085.942104] R13: 0000000000000000 R14: ffff91c909a96100 R15: 0000000000000001 [10085.942118] FS: 00007fe417837740(0000) GS:ffff91c969d00000(0000) knlGS:0000000000000000 [10085.942134] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10085.942146] CR2: 000055a8d567ecd8 CR3: 0000000121690003 CR4: 00000000003706e0 [10085.942160] Call Trace: [10085.942166] ? __lock_acquire+0x3af/0x22e0 [10085.942177] ? cancel_work_sync+0xb/0x10 [10085.942187] __cancel_work_timer+0x128/0x1b0 [10085.942197] ? __pm_runtime_resume+0x5b/0x90 [10085.942208] cancel_work_sync+0xb/0x10 [10085.942217] t3_sge_stop+0x2f/0x50 [cxgb3] [10085.942234] remove_one+0x26/0x190 [cxgb3] [10085.942248] pci_device_remove+0x39/0xa0 [10085.942258] __device_release_driver+0x15e/0x240 [10085.942269] driver_detach+0xd9/0x120 [10085.942278] bus_remove_driver+0x53/0xd0 [10085.942288] driver_unregister+0x2c/0x50 [10085.942298] pci_unregister_driver+0x31/0x90 [10085.942307] cxgb3_cleanup_module+0x10/0x18c [cxgb3] [10085.942324] __do_sys_delete_module+0x191/0x250 [10085.942336] ? syscall_enter_from_user_mode+0x21/0x60 [10085.942347] ? trace_hardirqs_on+0x2a/0xe0 [10085.942357] __x64_sys_delete_module+0x13/0x20 [10085.942368] do_syscall_64+0x40/0x90 [10085.942377] entry_SYSCALL_64_after_hwframe+0x44/0xae [10085.942389] RIP: 0033:0x7fe41796323b Fixes: 5e0b8928 ("net:cxgb3: replace tasklets with works") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit cdff1eda ] One MIPS platform (mach-rc32434) defines GPIOBASE. This macro conflicts with one of the same name in lpc_sch.c. Rename the latter one to prevent the build error. ../drivers/mfd/lpc_sch.c:25: error: "GPIOBASE" redefined [-Werror] 25 | #define GPIOBASE 0x44 ../arch/mips/include/asm/mach-rc32434/rb.h:32: note: this is the location of the previous definition 32 | #define GPIOBASE 0x050000 Cc: Denis Turischev <denis@compulab.co.il> Fixes: e82c60ae ("mfd: Introduce lpc_sch for Intel SCH LPC bridge") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit fe63339e ] This reverts commit 9cf448c2. This commit was added for equivalence with a similar fix to ip_gre. That fix proved to have a bug. Upon closer inspection, ip6_gre is not susceptible to the original bug. So revert the unnecessary extra check. In short, ipgre_xmit calls skb_pull to remove ipv4 headers previously inserted by dev_hard_header. ip6gre_tunnel_xmit does not. Link: https://lore.kernel.org/netdev/CA+FuTSe+vJgTVLc9SojGuN-f9YQ+xWLPKE_S4f=f+w+_P2hgUg@mail.gmail.com/#t Fixes: 9cf448c2 ("ip6_gre: add validation for csum_start") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 1b2b9183 ] If error recovery is already enabled, bnxt_timer() will periodically check the heartbeat register and the reset counter. If we get an error recovery async. notification from the firmware (e.g. change in primary/secondary role), we will immediately read and update the heartbeat register and the reset counter. If the timer for the next health check expires soon after this, we may read the heartbeat register again in quick succession and find that it hasn't changed. This will trigger error recovery unintentionally. The likelihood is small because we also reset fw_health->tmr_counter which will reset the interval for the next health check. But the update is not protected and bnxt_timer() can miss the update and perform the health check without waiting for the full interval. Fix it by only reading the heartbeat register and reset counter in bnxt_async_event_process() if error recovery is trasitioning to the enabled state. Also add proper memory barriers so that when enabling for the first time, bnxt_timer() will see the tmr_counter interval and perform the health check after the full interval has elapsed. Fixes: 7e914027 ("bnxt_en: Enable health monitoring.") Reviewed-by:
-
Michael Chan authored
[ Upstream commit 6fdab8a3 ] The current asic.rev is incomplete and does not include the metal revision. Add the metal revision and decode the complete asic revision into the more common and readable form (A0, B0, etc). Fixes: 7154917a ("bnxt_en: Refactor bnxt_dl_info_get().") Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Edwin Peer authored
[ Upstream commit 1656db67 ] The FW_PSID version components are 8 bits wide, not 4. Fixes: db28b6c7 ("bnxt_en: Fix devlink info's stored fw.psid version format.") Signed-off-by:
-
Rafał Miłecki authored
[ Upstream commit 63f8428b ] Broadcom's b53 switches have one IMP (Inband Management Port) that needs to be programmed using its own designed register. IMP port may be different than CPU port - especially on devices with multiple CPU ports. For that reason it's required to explicitly note IMP port index and check for it when choosing a register to use. This commit fixes BCM5301x support. Those switches use CPU port 5 while their IMP port is 8. Before this patch b53 was trying to program port 5 with B53_PORT_OVERRIDE_CTRL instead of B53_GMII_PORT_OVERRIDE_CTRL(5). It may be possible to also replace "cpu_port" usages with dsa_is_cpu_port() but that is out of the scope of thix BCM5301x fix. Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 8a0ed250 ] The GRE tunnel device can pull existing outer headers in ipge_xmit. This is a rare path, apparently unique to this device. The below commit ensured that pulling does not move skb->data beyond csum_start. But it has a false positive if ip_summed is not CHECKSUM_PARTIAL and thus csum_start is irrelevant. Refine to exclude this. At the same time simplify and strengthen the test. Simplify, by moving the check next to the offending pull, making it more self documenting and removing an unnecessary branch from other code paths. Strengthen, by also ensuring that the transport header is correct and therefore the inner headers will be after skb_reset_inner_headers. The transport header is set to csum_start in skb_partial_csum_set. Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/ Fixes: 1d011c48 ("ip_gre: add validation for csum_start") Reported-by:
Ido Schimmel <idosch@idosch.org> Suggested-by:
Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by:
Alexander Duyck <alexanderduyck@fb.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 45010c08 ] A firmware is requested but never released in this function. This leads to a memory leak in the normal execution path. Add the missing 'release_firmware()' call. Also introduce a temp variable (new_len) in order to keep the value of 'pnvm->size' after the firmware has been released. Fixes: cdda18fb ("iwlwifi: pnvm: move file loading code to a separate function") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Luca Coelho <luca@coelho.fi> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1b5d80f54c1dbf85710fd285243932943b498fe7.1630614969.git.christophe.jaillet@wanadoo.fr Signed-off-by:
-
Dror Moshe authored
[ Upstream commit b05c1d14 ] Move code that generates the pnvm file name to a separate function, so that it can be reused. Signed-off-by:
Dror Moshe <drorx.moshe@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.7d2dd18c75a2.I3652584755b9ab44909ddcd09ff4d80c6690a1ad@changeid Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit 9ddbc2a0 ] Previous commit 68233c58 removes the qlcnic_rom_lock() in qlcnic_pinit_from_rom(), but remains its corresponding unlock function, which is odd. I'm not very sure whether the lock is missing, or the unlock is redundant. This bug is suggested by a static analysis tool, please advise. Fixes: 68233c58 ("qlcnic: updated reset sequence") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c7c5e6ff ] syzbot found that forcing a big quantum attribute would crash hosts fast, essentially using this: tc qd replace dev eth0 root fq_codel quantum 4294967295 This is because fq_codel_dequeue() would have to loop ~2^31 times in : if (flow->deficit <= 0) { flow->deficit += q->quantum; list_move_tail(&flow->flowchain, &q->old_flows); goto begin; } SFQ max quantum is 2^19 (half a megabyte) Lets adopt a max quantum of one megabyte for FQ_CODEL. Fixes: 4b549a2e ("fq_codel: Fair Queue Codel AQM") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Benjamin Hesmans authored
[ Upstream commit 730affed ] Bug reported by KASAN: BUG: KASAN: use-after-scope in inet6_ehashfn (net/ipv6/inet6_hashtables.c:40) Call Trace: (...) inet6_ehashfn (net/ipv6/inet6_hashtables.c:40) (...) nf_sk_lookup_slow_v6 (net/ipv6/netfilter/nf_socket_ipv6.c:91 net/ipv6/netfilter/nf_socket_ipv6.c:146) It seems that this bug has already been fixed by Eric Dumazet in the past in: commit 78296c97 ("netfilter: xt_socket: fix a stack corruption bug") But a variant of the same issue has been introduced in commit d64d80a2 ("netfilter: x_tables: don't extract flow keys on early demuxed sks in socket match") `daddr` and `saddr` potentially hold a reference to ipv6_var that is no longer in scope when the call to `nf_socket_get_sock_v6` is made. Fixes: d64d80a2 ("netfilter: x_tables: don't extract flow keys on early demuxed sks in socket match") Acked-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Benjamin Hesmans <benjamin.hesmans@tessares.net> Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Mat Martineau authored
[ Upstream commit 340fa666 ] Recent changes exposed a bug where specifically-timed requests to the path manager netlink API could trigger a divide-by-zero in __tcp_select_window(), as syzkaller does: divide error: 0000 [#1] SMP KASAN NOPTI CPU: 0 PID: 9667 Comm: syz-executor.0 Not tainted 5.14.0-rc6+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:__tcp_select_window+0x509/0xa60 net/ipv4/tcp_output.c:3016 Code: 44 89 ff e8 c9 29 e9 fd 45 39 e7 0f 8d 20 ff ff ff e8 db 28 e9 fd 44 89 e3 e9 13 ff ff ff e8 ce 28 e9 fd 44 89 e0 44 89 e3 99 <f7> 7c 24 04 29 d3 e9 fc fe ff ff e8 b7 28 e9 fd 44 89 f1 48 89 ea RSP: 0018:ffff888031ccf020 EFLAGS: 00010216 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000040000 RDX: 0000000000000000 RSI: ffff88811532c080 RDI: 0000000000000002 RBP: 0000000000000000 R08: ffffffff835807c2 R09: 0000000000000000 R10: 0000000000000004 R11: ffffed1020b92441 R12: 0000000000000000 R13: 1ffff11006399e08 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fa4c8344700(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2f424000 CR3: 000000003e4e2003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: tcp_select_window net/ipv4/tcp_output.c:264 [inline] __tcp_transmit_skb+0xc00/0x37a0 net/ipv4/tcp_output.c:1351 __tcp_send_ack.part.0+0x3ec/0x760 net/ipv4/tcp_output.c:3972 __tcp_send_ack net/ipv4/tcp_output.c:3978 [inline] tcp_send_ack+0x7d/0xa0 net/ipv4/tcp_output.c:3978 mptcp_pm_nl_addr_send_ack+0x1ab/0x380 net/mptcp/pm_netlink.c:654 mptcp_pm_remove_addr+0x161/0x200 net/mptcp/pm.c:58 mptcp_nl_remove_id_zero_address+0x197/0x460 net/mptcp/pm_netlink.c:1328 mptcp_nl_cmd_del_addr+0x98b/0xd40 net/mptcp/pm_netlink.c:1359 genl_family_rcv_msg_doit.isra.0+0x225/0x340 net/netlink/genetlink.c:731 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x341/0x5b0 net/netlink/genetlink.c:792 netlink_rcv_skb+0x148/0x430 net/netlink/af_netlink.c:2504 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x537/0x750 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x846/0xd80 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0x14e/0x190 net/socket.c:724 ____sys_sendmsg+0x709/0x870 net/socket.c:2403 ___sys_sendmsg+0xff/0x170 net/socket.c:2457 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae mptcp_pm_nl_addr_send_ack() was attempting to send a TCP ACK on the first subflow in the MPTCP socket's connection list without validating that the subflow was in a suitable connection state. To address this, always validate subflow state when sending extra ACKs on subflows for address advertisement or subflow priority change. Fixes: 84dfe367 ("mptcp: send out dedicated ADD_ADDR packet") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/229 Co-developed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
[ Upstream commit d12e1c46 ] Setting DSA_MAX_PORTS caused DSA to call b53 callbacks (e.g. b53_disable_port() during dsa_register_switch()) for invalid (non-existent) ports. That made b53 modify unrelated registers and is one of reasons for a broken BCM5301x support. This problem exists for years but DSA_MAX_PORTS usage has changed few times. It seems the most accurate to reference commit dropping dsa_switch_alloc() in the Fixes tag. Fixes: 7e99e347 ("net: dsa: remove dsa_switch_alloc helper") Signed-off-by:
-
Rafał Miłecki authored
[ Upstream commit cdb067d3 ] It isn't true that CPU port is always the last one. Switches BCM5301x have 9 ports (port 6 being inactive) and they use port 5 as CPU by default (depending on design some other may be CPU ports too). A more reliable way of determining number of ports is to check for the last set bit in the "enabled_ports" bitfield. This fixes b53 internal state, it will allow providing accurate info to the DSA and is required to fix BCM5301x support. Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by:
-
Ziyang Xuan authored
[ Upstream commit ecdc28de ] If the network devices connected to the system beyond HSO_MAX_NET_DEVICES. add_net_device() in hso_create_net_device() will be failed for the network_table is full. It will lead to business failure which rely on network_table, for example, hso_suspend() and hso_resume(). It will also lead to memory leak because resource release process can not search the hso_device object from network_table in hso_free_interface(). Add failure handler for add_net_device() in hso_create_net_device() to solve the above problems. Fixes: 72dc1c09 ("HSO: add option hso driver") Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by:
-
Matthieu Baerts authored
[ Upstream commit bfd862a7 ] '$cin' and '$sin' variables are local to a function: they are then not available from the cleanup trap. Instead, we need to use '$large' and '$small' that are not local and defined just before setting the trap. Without this patch, running this script in a loop might cause a: write: No space left on device issue. Fixes: 1a418cb8 ("mptcp: simult flow self-tests") Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 1094c6fe ] Florian noted that if mptcp_alloc_tx_skb() allocation fails in __mptcp_push_pending(), we can end-up invoking mptcp_push_release()/tcp_push() with a zero mss, causing a divide by 0 error. This change addresses the issue refactoring the skb allocation code checking if skb collapsing will happen for sure and doing the skb allocation only after such check. Skb allocation will now happen only after the call to tcp_send_mss() which correctly initializes mss_now. As side bonuses we now fill the skb tx cache only when needed, and this also clean-up a bit the output path. v1 -> v2: - use lockdep_assert_held_once() - Jakub - fix indentation - Jakub Reported-by:
-
James Clark authored
[ Upstream commit 8af52e69 ] Currently the clean target when using O= isn't cleaning the feature detect output. This is because O= and OUTPUT= are set to canonical paths. For example in tools/perf/Makefile: FULL_O := $(shell cd $(PWD); readlink -f $(O) || echo $(O)) This means that OUTPUT ends in a / and most usages prepend it to a file without adding an extra /. This line that was changed adds an extra / before the 'feature' folder but not to the end, resulting in a clean command like this: rm -f /tmp/build//featuretest-all.bin ... After the change the clean command looks like this: rm -f /tmp/build/feature/test-all.bin ... Fixes: 762323eb ("perf build: Move feature cleanup under tools/build") Signed-off-by:
James Clark <james.clark@arm.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20210816130705.1331868-1-james.clark@arm.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 0e90dfa7 ] I noticed that only port 0 worked on the RTL8366RB since we started to use custom tags. It turns out that the format of egress custom tags is actually different from ingress custom tags. While the lower bits just contain the port number in ingress tags, egress tags need to indicate destination port by setting the bit for the corresponding port. It was working on port 0 because port 0 added 0x00 as port number in the lower bits, and if you do this the packet appears at all ports, including the intended port. Ooops. Fix this and all ports work again. Use the define for shifting the "type A" into place while we're at it. Tested on the D-Link DIR-685 by sending traffic to each of the ports in turn. It works. Fixes: 86dd9868 ("net: dsa: tag_rtl4_a: Support also egress tags") Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Ming Lei authored
[ Upstream commit 7db30437 ] In case of buffered reading from block device, when short read happens, we should retry to read more, otherwise the IO will be completed partially, for example, the following fio expects to read 2MB, but it can only read 1M or less bytes: fio --name=onessd --filename=/dev/nvme0n1 --filesize=2M \ --rw=randread --bs=2M --direct=0 --overwrite=0 --numjobs=1 \ --iodepth=1 --time_based=0 --runtime=2 --ioengine=io_uring \ --registerfiles --fixedbufs --gtod_reduce=1 --group_reporting Fix the issue by allowing short read retry for block device, which sets FMODE_BUF_RASYNC really. Fixes: 9a173346 ("io_uring: fix short read retries for non-reg files") Cc: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20210821150751.1290434-1-ming.lei@redhat.com Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 889a1b3f ] If an error occurs after a 'gpiochip_add_data()' call it must be undone by a corresponding 'gpiochip_remove()' as already done in the remove function. To simplify the code a fix a leak in the error handling path of the probe, use the managed version instead (i.e. 'devm_gpiochip_add_data()') Fixes: 698b8eea ("gpio/mpc8xxx: change irq handler from chained to normal") Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 7d658893 ] Commit 76c47d14 ("gpio: mpc8xxx: Add ACPI support") has switched to a managed version when dealing with 'mpc8xxx_gc->regs'. So the corresponding 'iounmap()' call in the error handling path and in the remove should be removed to avoid a double unmap. This also allows some simplification in the probe. All the error handling paths related to managed resources can be direct returns and a NULL check in what remains in the error handling path can be removed. Fixes: 76c47d14 ("gpio: mpc8xxx: Add ACPI support") Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 555bda42 ] Commit 698b8eea ("gpio/mpc8xxx: change irq handler from chained to normal") has introduced a new 'goto err;' at the very end of the function, but has not updated the error handling path accordingly. Add the now missing 'irq_domain_remove()' call which balances a previous 'irq_domain_create_linear() call. Fixes: 698b8eea ("gpio/mpc8xxx: change irq handler from chained to normal") Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit edf7b4a2 ] The build on fedora:35 and fedora:rawhide with clang is failing with: 49 41.00 fedora:35 : FAIL clang version 13.0.0 (Fedora 13.0.0~rc1-1.fc35) bench/inject-buildid.c:351:6: error: variable 'len' set but not used [-Werror,-Wunused-but-set-variable] u64 len = 0; ^ 1 error generated. make[3]: *** [/git/perf-5.14.0-rc7/tools/build/Makefile.build:139: bench] Error 2 50 41.11 fedora:rawhide : FAIL clang version 13.0.0 (Fedora 13.0.0~rc1-1.fc35) bench/inject-buildid.c:351:6: error: variable 'len' set but not used [-Werror,-Wunused-but-set-variable] u64 len = 0; ^ 1 error generated. make[3]: *** [/git/perf-5.14.0-rc7/tools/build/Makefile.build:139: bench] Error 2 That 'len' variable is not used at all, so just make sure all the synthesize_RECORD() routines return ssize_t to propagate the writen() return, as it may fail, ditch the 'ret' var and bail out if those routines fail. Fixes: 0bf02a0d ("perf bench: Add build-id injection benchmark") Acked-by:
Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/CAM9d7cgEZNSor+B+7Y2C+QYGme_v5aH0Zn0RLfxoQ+Fy83EHrg@mail.gmail.com Signed-off-by:
-
Li Huafei authored
[ Upstream commit cdf32b44 ] When setting LIBUNWIND_DIR, we first set FEATURE_CHECK_LDFLAGS-libunwind-{aarch64,x86} = -L$(LIBUNWIND_DIR)/lib. <committer note> This happens a bit before, the overwritting, in: libunwind_arch_set_flags = $(eval $(libunwind_arch_set_flags_code)) define libunwind_arch_set_flags_code FEATURE_CHECK_CFLAGS-libunwind-$(1) = -I$(LIBUNWIND_DIR)/include FEATURE_CHECK_LDFLAGS-libunwind-$(1) = -L$(LIBUNWIND_DIR)/lib endef ifdef LIBUNWIND_DIR LIBUNWIND_CFLAGS = -I$(LIBUNWIND_DIR)/include LIBUNWIND_LDFLAGS = -L$(LIBUNWIND_DIR)/lib LIBUNWIND_ARCHS = x86 x86_64 arm aarch64 debug-frame-arm debug-frame-aarch64 $(foreach libunwind_arch,$(LIBUNWIND_ARCHS),$(call libunwind_arch_set_flags,$(libunwind_arch))) endif Look at that 'foreach' on all the LIBUNWIND_ARCHS. </> After commit 5c4d7c82 ("perf unwind: Do not put libunwind-{x86,aarch64} in FEATURE_TESTS_BASIC"), FEATURE_CHECK_LDFLAGS-libunwind-{x86,aarch64} is overwritten. As a result, the remote libunwind libraries cannot be searched from $(LIBUNWIND_DIR)/lib directory during feature check tests. Fix it with variable appending. Before this patch: perf$ make VF=1 LIBUNWIND_DIR=/opt/libunwind_aarch64 BUILD: Doing 'make -j16' parallel build <SNIP> ... ... libopencsd: [ OFF ] ... libunwind-x86: [ OFF ] ... libunwind-x86_64: [ OFF ] ... libunwind-arm: [ OFF ] ... libunwind-aarch64: [ OFF ] ... libunwind-debug-frame: [ OFF ] ... libunwind-debug-frame-arm: [ OFF ] ... libunwind-debug-frame-aarch64: [ OFF ] ... cxx: [ OFF ] <SNIP> perf$ cat ../build/feature/test-libunwind-aarch64.make.output /usr/bin/ld: cannot find -lunwind-aarch64 /usr/bin/ld: cannot find -lunwind-aarch64 collect2: error: ld returned 1 exit status After this patch: perf$ make VF=1 LIBUNWIND_DIR=/opt/libunwind_aarch64 BUILD: Doing 'make -j16' parallel build <SNIP> ... libopencsd: [ OFF ] ... libunwind-x86: [ OFF ] ... libunwind-x86_64: [ OFF ] ... libunwind-arm: [ OFF ] ... libunwind-aarch64: [ on ] ... libunwind-debug-frame: [ OFF ] ... libunwind-debug-frame-arm: [ OFF ] ... libunwind-debug-frame-aarch64: [ OFF ] ... cxx: [ OFF ] <SNIP> perf$ cat ../build/feature/test-libunwind-aarch64.make.output perf$ ldd ./perf linux-vdso.so.1 (0x00007ffdf07da000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f30953dc000) librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f30951d4000) libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007f3094e36000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f3094c32000) libelf.so.1 => /usr/lib/x86_64-linux-gnu/libelf.so.1 (0x00007f3094a18000) libdw.so.1 => /usr/lib/x86_64-linux-gnu/libdw.so.1 (0x00007f30947cc000) libunwind-x86_64.so.8 => /usr/lib/x86_64-linux-gnu/libunwind-x86_64.so.8 (0x00007f30945ad000) libunwind.so.8 => /usr/lib/x86_64-linux-gnu/libunwind.so.8 (0x00007f3094392000) liblzma.so.5 => /lib/x86_64-linux-gnu/liblzma.so.5 (0x00007f309416c000) libunwind-aarch64.so.8 => not found libslang.so.2 => /lib/x86_64-linux-gnu/libslang.so.2 (0x00007f3093c8a000) libpython2.7.so.1.0 => /usr/local/lib/libpython2.7.so.1.0 (0x00007f309386b000) libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007f309364e000) libnuma.so.1 => /usr/lib/x86_64-linux-gnu/libnuma.so.1 (0x00007f3093443000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f3093052000) /lib64/ld-linux-x86-64.so.2 (0x00007f3096097000) libbz2.so.1.0 => /lib/x86_64-linux-gnu/libbz2.so.1.0 (0x00007f3092e42000) libutil.so.1 => /lib/x86_64-linux-gnu/libutil.so.1 (0x00007f3092c3f000) Fixes: 5c4d7c82 ("perf unwind: Do not put libunwind-{x86,aarch64} in FEATURE_TESTS_BASIC") Signed-off-by:
Li Huafei <lihuafei1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhang Jinhao <zhangjinhao2@huawei.com> Link: http://lore.kernel.org/lkml/20210823134340.60955-1-lihuafei1@huawei.com Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 261f4911 ] Acaict, perf_home_perfconfig() is supposed to cache the result of home_perfconfig, which returns the default location of perfconfig for the user, given the HOME environment variable. However, the current implementation calls home_perfconfig every time perf_home_perfconfig() is called (so no caching is actually performed), replacing the previous pointer, thus also causing a memory leak. This patch adds a check of whether either config or failed is set and, in that case, directly returns config without calling home_perfconfig at each invocation. Fixes: f5f03e19 ("perf config: Add perf_home_perfconfig function") Signed-off-by:
Riccardo Mancini <rickyman7@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Link: http://lore.kernel.org/lkml/20210820130817.740536-1-rickyman7@gmail.com [ Removed needless double check for the 'failed' variable ] Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 6b5ff040 ] 0day bot reports a build error: ERROR: modpost: "clear_user_page" [drivers/media/v4l2-core/videobuf-dma-sg.ko] undefined! so export it in arch/arc/ to fix the build error. In most ARCHes, clear_user_page() is a macro. OTOH, in a few ARCHes it is a function and needs to be exported. PowerPC exported it in 2004. It looks like nds32 and nios2 still need to have it exported. Fixes: 4102b533 ("ARC: [mm] Aliasing VIPT dcache support 2/4") Signed-off-by:
kernel test robot <lkp@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-snps-arc@lists.infradead.org Signed-off-by:
Vineet Gupta <vgupta@kernel.org> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 6b430c75 ] A successful 'init_rs_non_canonical()' call should be balanced by a corresponding 'free_rs()' call in the error handling path of the probe, as already done in the remove function. Update the error handling path accordingly. Fixes: 8c61b7a7 ("[MTD] [NAND] Use rslib for CAFÉ ECC") Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/fd313d3fb787458bcc73189e349f481133a2cdc9.1629532640.git.christophe.jaillet@wanadoo.fr Signed-off-by:
-
Curtis Klein authored
[ Upstream commit c7b178da ] watchdog_hrtimer_pretimeout_stop needs the watchdog device to have a valid pointer to the watchdog core data to stop the pretimeout hrtimer. Therefore it needs to be called before the pointers are cleared in watchdog_cdev_unregister. Fixes: 7b7d2fdc ("watchdog: Add hrtimer-based pretimeout feature") Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Curtis Klein <curtis.klein@hpe.com> Reviewed-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 817f9916 ] The CONFIG_PCI=y case got a new parameter long time ago. Sync the stub as well. [bhelgaas: add parameter names] Fixes: 725522b5 ("PCI: add the sysfs driver name to all modules") Link: https://lore.kernel.org/r/20210813153619.89574-1-andriy.shevchenko@linux.intel.com Reported-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit ff3a52ab ] Since 39850ed5 ("PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume"), devices that have PTM capability but don't enable it see this message on calls to pci_save_state(): no suspend buffer for PTM Drop the message, it's perfectly fine not to use a capability. Fixes: 39850ed5 ("PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume") Link: https://lore.kernel.org/r/20210811185955.3112534-1-kuba@kernel.org Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Signed-off-by:
-
