- 10 Jun, 2020 35 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 3f4f034a which is commit 9ca41539 upstream. It was backported incorrectly, Paul writes at: https://lore.kernel.org/r/20200607203425.GD23662@windriver.com I happened to notice this commit: 9ca41539 - "net/mlx5: Annotate mutex destroy for root ns" ...was backported to 4.19 and 5.4 and v5.6 in linux-stable. It patches del_sw_root_ns() - which only exists after v5.7-rc7 from: 6eb7a268 - "net/mlx5: Don't maintain a case of del_sw_func being null" which creates the one line del_sw_root_ns stub function around kfree(node) by breaking it out of tree_put_node(). In the absense of del_sw_root_ns - the backport finds an identical one line kfree stub fcn - named del_sw_prio from this earlier commit: 139ed6c6 - "net/mlx5: Fix steering memory leak" [in v4.15-rc5] and then puts the mutex_destroy() into that (wrong) function, instead of putting it into tree_put_node where the root ns case used to be hand Reported-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Roi Dayan <roid@mellanox.com> Cc: Mark Bloch <markb@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oleg Nesterov authored
commit 013b2deb upstream. uprobe_write_opcode() must not cross page boundary; prepare_uprobe() relies on arch_uprobe_analyze_insn() which should validate "vaddr" but some architectures (csky, s390, and sparc) don't do this. We can remove the BUG_ON() check in prepare_uprobe() and validate the offset early in __uprobe_register(). The new IS_ALIGNED() check matches the alignment check in arch_prepare_kprobe() on supported architectures, so I think that all insns must be aligned to UPROBE_SWBP_INSN_SIZE. Another problem is __update_ref_ctr() which was wrong from the very beginning, it can read/write outside of kmap'ed page unless "vaddr" is aligned to sizeof(short), __uprobe_register() should check this too. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Suggested-by:
Oleg Nesterov <oleg@redhat.com> Reviewed-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Tested-by:
Sven Schnelle <svens@linux.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Josh Poimboeuf authored
commit 3798cc4d upstream Make the docs match the code. Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Mark Gross authored
commit 7222a1b5 upstream Add documentation for the SRBDS vulnerability and its mitigation. [ bp: Massage. jpoimboe: sysfs table strings. ] Signed-off-by:
Mark Gross <mgross@linux.intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Tony Luck <tony.luck@intel.com> Reviewed-by:
-
Mark Gross authored
commit 7e5b3c26 upstream SRBDS is an MDS-like speculative side channel that can leak bits from the random number generator (RNG) across cores and threads. New microcode serializes the processor access during the execution of RDRAND and RDSEED. This ensures that the shared buffer is overwritten before it is released for reuse. While it is present on all affected CPU models, the microcode mitigation is not needed on models that enumerate ARCH_CAPABILITIES[MDS_NO] in the cases where TSX is not supported or has been disabled with TSX_CTRL. The mitigation is activated by default on affected processors and it increases latency for RDRAND and RDSEED instructions. Among other effects this will reduce throughput from /dev/urandom. * Enable administrator to configure the mitigation off when desired using either mitigations=off or srbds=off. * Export vulnerability status via sysfs * Rename file-scoped macros to apply for non-whitelist table initializations. [ bp: Massage, - s/VULNBL_INTEL_STEPPING/VULNBL_INTEL_STEPPINGS/g, - do not read arch cap MSR a second time in tsx_fused_off() - just pass it in, - flip check in cpu_set_bug_bits() to save an indentation level, - reflow comments. jpoimboe: s/Mitigated/Mitigation/ in user-visible strings tglx: Dropped the fused off magic for now ] Signed-off-by:
Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Reviewed-by:
Neelima Krishnan <neelima.krishnan@intel.com> Signed-off-by:
-
Mark Gross authored
commit 93920f61 upstream To make cpu_matches() reusable for other matching tables, have it take a pointer to a x86_cpu_id table as an argument. [ bp: Flip arguments order. ] Signed-off-by:
-
Mark Gross authored
commit e9d71445 upstream Intel uses the same family/model for several CPUs. Sometimes the stepping must be checked to tell them apart. On x86 there can be at most 16 steppings. Add a steppings bitmask to x86_cpu_id and a X86_MATCH_VENDOR_FAMILY_MODEL_STEPPING_FEATURE macro and support for matching against family/model/stepping. [ bp: Massage. tglx: Lightweight variant for backporting ] Signed-off-by:
-
Tony W Wang-oc authored
commit 1e41a766 upstream. New Zhaoxin family 7 CPUs are not affected by SPECTRE_V2. So define a separate cpu_vuln_whitelist bit NO_SPECTRE_V2 and add these CPUs to the cpu vulnerability whitelist. Signed-off-by:
Tony W Wang-oc <TonyWWang-oc@zhaoxin.com> Signed-off-by:
-
Srinivas Kandagatla authored
commit 8d9eb0d6 upstream. qfprom has different address spaces for read and write. Reads are always done from corrected address space, where as writes are done on raw address space. Writing to corrected address space is invalid and ignored, so it does not make sense to have this support in the driver which only supports corrected address space regions at the moment. Fixes: 4ab11996 ("nvmem: qfprom: Add Qualcomm QFPROM support.") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200522113341.7728-1-srinivas.kandagatla@linaro.org Signed-off-by:
-
Oliver Neukum authored
commit 97fe8099 upstream. If buffers are iterated over in the error case, the lower limits for quirky devices must be heeded. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by:
Jean Rene Dawin <jdawin@math.uni-bielefeld.de> Fixes: a4e7279c ("cdc-acm: introduce a cool down") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200526124420.22160-1-oneukum@suse.com Signed-off-by:
-
Pascal Terjan authored
commit 15ea976a upstream. The value in shared headers was fixed 9 years ago in commit 8d661f1e ("ieee80211: correct IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK macro") and while looking at using shared headers for other duplicated constants I noticed this driver uses the old value. The macros are also defined twice in this file so I am deleting the second definition. Signed-off-by:
Pascal Terjan <pterjan@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200523211247.23262-1-pterjan@google.com Signed-off-by:
-
Jiri Slaby authored
commit 24eb2377 upstream. hvc_open sets tty->driver_data to NULL when open fails at some point. Typically, the failure happens in hp->ops->notifier_add(). If there is a racing process which tries to open such mangled tty, which was not closed yet, the process will crash in hvc_open as tty->driver_data is NULL. All this happens because close wants to know whether open failed or not. But ->open should not NULL this and other tty fields for ->close to be happy. ->open should call tty_port_set_initialized(true) and close should check by tty_port_initialized() instead. So do this properly in this driver. So this patch removes these from ->open: * tty_port_tty_set(&hp->port, NULL). This happens on last close. * tty->driver_data = NULL. Dtto. * tty_port_put(&hp->port). This happens in shutdown and until now, this must have been causing a reference underflow, if I am not missing something. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Reported-and-tested-by:
Raghavendra <rananta@codeaurora.org> Link: https://lore.kernel.org/r/20200526145632.13879-1-jslaby@suse.cz Signed-off-by:
-
Dmitry Torokhov authored
commit b86dab05 upstream. When k_ascii is invoked several times in a row there is a potential for signed integer overflow: UBSAN: Undefined behaviour in drivers/tty/vt/keyboard.c:888:19 signed integer overflow: 10 * 1111111111 cannot be represented in type 'int' CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.11 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 ubsan_epilogue+0xe/0x30 lib/ubsan.c:154 handle_overflow+0xdc/0xf0 lib/ubsan.c:184 __ubsan_handle_mul_overflow+0x2a/0x40 lib/ubsan.c:205 k_ascii+0xbf/0xd0 drivers/tty/vt/keyboard.c:888 kbd_keycode drivers/tty/vt/keyboard.c:1477 [inline] kbd_event+0x888/0x3be0 drivers/tty/vt/keyboard.c:1495 While it can be worked around by using check_mul_overflow()/ check_add_overflow(), it is better to introduce a separate flag to signal that number pad is being used to compose a symbol, and change type of the accumulator from signed to unsigned, thus avoiding undefined behavior when it overflows. Reported-by:
Kyungtae Kim <kt0755@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200525232740.GA262061@dtor-ws Signed-off-by:
-
Dinghao Liu authored
commit e4befc12 upstream. When copy_from_user() returns an error code, there is a runtime PM usage counter imbalance. Fix this by moving copy_from_user() to the beginning of this function. Fixes: 7b6c1b4c ("usb: musb: fix runtime PM in debugfs") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Cc: stable@vger.kernel.org Signed-off-by:
Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200525025049.3400-7-b-liu@ti.com Signed-off-by:
-
Bin Liu authored
commit 7f88a5ac upstream. Commit 17539f2f ("usb: musb: fix enumeration after resume") replaced musb_start() in musb_resume() to not override softconnect bit, but it doesn't restart the session for host port which was done in musb_start(). The session could be disabled in musb_suspend(), which leads the host port doesn't stay in host mode. So let's start the session specifically for host port in musb_resume(). Fixes: 17539f2f ("usb: musb: fix enumeration after resume") Cc: stable@vger.kernel.org Signed-off-by:
-
Fabrice Gasnier authored
commit 10134ec3 upstream. A wrong error message is printed out currently, like on STM32MP15: - stm32-adc-core 48003000.adc: IRQ index 2 not found. This is seen since commit 7723f4c5 ("driver core: platform: Add an error message to platform_get_irq*()"). The STM32 ADC core driver wrongly requests up to 3 interrupt lines. It should request only the necessary IRQs, based on the compatible: - stm32f4/h7 ADCs share a common interrupt - stm32mp1, has one interrupt line per ADC. So add the number of required interrupts to the compatible data. Fixes: d58c67d1 ("iio: adc: stm32-adc: add support for STM32MP1") Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Jonathan Cameron authored
commit 13e94563 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes: a1d64226 ("iio: chemical: add support for Plantower PMS7003 sensor") Reported-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Tomasz Duszynski <tomasz.duszynski@octakon.com> Signed-off-by:
-
Mathieu Othacehe authored
commit 18dfb532 upstream. The bytes returned by the i2c reading need to be swapped unconditionally. Otherwise, on be16 platforms, an incorrect value will be returned. Taking the slow path via next merge window as its been around a while and we have a patch set dependent on this which would be held up. Fixes: 62a1efb9 ("iio: add vcnl4000 combined ALS and proximity sensor") Signed-off-by:
Mathieu Othacehe <m.othacehe@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Jonathan Cameron authored
commit a5bf6fdd upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. Fixes: 232e0f6d ("iio: chemical: add support for Sensirion SPS30 sensor") Reported-by:
-
Michael Hanselmann authored
commit c404bf4a upstream. A subset of CH341 devices does not support all features, namely the prescaler is limited to a reduced precision and there is no support for sending a RS232 break condition. This patch adds a detection function which will be extended to set quirk flags as they're implemented. The author's affected device has an imprint of "340" on the turquoise-colored plug, but not all such devices appear to be affected. Signed-off-by:
Michael Hanselmann <public@hansmi.ch> Link: https://lore.kernel.org/r/1e1ae0da6082bb528a44ef323d4e1d3733d38858.1585697281.git.public@hansmi.ch [ johan: use long type for quirks; rephrase and use port device for messages; handle short reads; set quirk flags directly in helper function ] Cc: stable <stable@vger.kernel.org> # 5.5 Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Daniele Palmas authored
commit 399ad947 upstream. Add Telit LE910C1-EUX compositions: 0x1031: tty, tty, tty, rmnet 0x1033: tty, tty, tty, ecm Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20200525211106.27338-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by:
-
Bin Liu authored
commit 986c1748 upstream. usb_wwan_indat_callback() shouldn't resubmit rx urb if the previous urb status is a fatal error. Or the usb controller would keep processing the new urbs then run into interrupt storm, and has no chance to recover. Fixes: 6c1ee66a ("USB-Serial: Fix error handling of usb_wwan") Cc: stable@vger.kernel.org Signed-off-by:
-
Matt Jolly authored
commit 3429444a upstream. Add support for Dell Wireless 5816e Download Mode (AKA boot & hold mode / QDL download mode) to drivers/usb/serial/qcserial.c This is required to update device firmware. Signed-off-by:
Matt Jolly <Kangie@footclan.ninja> Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7c6d2ecb ] Recent change in virtio_net_hdr_to_skb() broke some packetdrill tests. When --mss=XXX option is set, packetdrill always provide gso_type & gso_size for its inbound packets, regardless of packet size. if (packet->tcp && packet->mss) { if (packet->ipv4) gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4; else gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6; gso.gso_size = packet->mss; } Since many other programs could do the same, relax virtio_net_hdr_to_skb() to no longer return an error, but instead ignore gso settings. This keeps Willem intent to make sure no malicious packet could reach gso stack. Note that TCP stack has a special logic in tcp_set_skb_tso_segs() to clear gso_size for small packets. Fixes: 6dd912f8 ("net: check untrusted gso_size at kernel entry") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 6dd912f8 ] Syzkaller again found a path to a kernel crash through bad gso input: a packet with gso size exceeding len. These packets are dropped in tcp_gso_segment and udp[46]_ufo_fragment. But they may affect gso size calculations earlier in the path. Now that we have thlen as of commit 9274124f ("net: stricter validation of untrusted gso packets"), check gso_size at entry too. Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Stefano Garzarella authored
[ Upstream commit 7e0afbdf ] The accept(2) is an "input" socket interface, so we should use SO_RCVTIMEO instead of SO_SNDTIMEO to set the timeout. So this patch replace sock_sndtimeo() with sock_rcvtimeo() to use the right timeout in the vsock_accept(). Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
Heinrich Kuhn authored
[ Upstream commit 5b186cd6 ] Prior to this change the correct value for the used counter is calculated but not stored nor, therefore, propagated to user-space. In use-cases such as OVS use-case at least this results in active flows being removed from the hardware datapath. Which results in both unnecessary flow tear-down and setup, and packet processing on the host. This patch addresses the problem by saving the calculated used value which allows the value to propagate to user-space. Found by inspection. Fixes: aa6ce2ea ("nfp: flower: support stats update for merge flows") Signed-off-by:
Heinrich Kuhn <heinrich.kuhn@netronome.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit 3decabdc ] st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path. Add the missed function call to fix it. Fixes: 1892bf84 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
Daniele Palmas authored
[ Upstream commit 591612aa ] Add support for Telit LE910C1-EUX composition 0x1031: tty, tty, tty, rmnet Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Fugang Duan authored
[ Upstream commit f2fb6b62 ] For rx filter 'HWTSTAMP_FILTER_PTP_V2_EVENT', it should be PTP v2/802.AS1, any layer, any kind of event packet, but HW only take timestamp snapshot for below PTP message: sync, Pdelay_req, Pdelay_resp. Then it causes below issue when test E2E case: ptp4l[2479.534]: port 1: received DELAY_REQ without timestamp ptp4l[2481.423]: port 1: received DELAY_REQ without timestamp ptp4l[2481.758]: port 1: received DELAY_REQ without timestamp ptp4l[2483.524]: port 1: received DELAY_REQ without timestamp ptp4l[2484.233]: port 1: received DELAY_REQ without timestamp ptp4l[2485.750]: port 1: received DELAY_REQ without timestamp ptp4l[2486.888]: port 1: received DELAY_REQ without timestamp ptp4l[2487.265]: port 1: received DELAY_REQ without timestamp ptp4l[2487.316]: port 1: received DELAY_REQ without timestamp Timestamp snapshot dependency on register bits in received path: SNAPTYPSEL TSMSTRENA TSEVNTENA PTP_Messages 01 x 0 SYNC, Follow_Up, Delay_Req, Delay_Resp, Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up 01 0 1 SYNC, Pdelay_Req, Pdelay_Resp For dwmac v5.10a, enabling all events by setting register DWC_EQOS_TIME_STAMPING[SNAPTYPSEL] to 2’b01, clearing bit [TSEVNTENA] to 0’b0, which can support all required events. Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Mark Bloch authored
[ Upstream commit 8fc3e29b ] Currently a Linux system with the mlx5 NIC always crashes upon hibernation - suspend/resume. Add basic callbacks so the NIC could be suspended and resumed. Fixes: 9603b61d ("mlx5: Move pci device handling from mlx5_ib to mlx5_core") Tested-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
Mark Bloch <markb@mellanox.com> Reviewed-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 02c71b14 ] syzbot recently found a way to crash the kernel [1] Issue here is that inet_hash() & inet_unhash() are currently only meant to be used by TCP & DCCP, since only these protocols provide the needed hashinfo pointer. L2TP uses a single list (instead of a hash table) This old bug became an issue after commit 61023658 ("bpf: Add new cgroup attach type to enable sock modifications") since after this commit, sk_common_release() can be called while the L2TP socket is still considered 'hashed'. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 7063 Comm: syz-executor654 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: sk_common_release+0xba/0x370 net/core/sock.c:3210 inet_create net/ipv4/af_inet.c:390 [inline] inet_create+0x966/0xe00 net/ipv4/af_inet.c:248 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x441e29 Code: e8 fc b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdce184148 EFLAGS: 00000246 ORIG_RAX: 0000000000000029 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441e29 RDX: 0000000000000073 RSI: 0000000000000002 RDI: 0000000000000002 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000402c30 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace 23b6578228ce553e ]--- RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 0d76751f ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d9a81a22 ] syzbot was able to trigger a crash after using an ISDN socket and fool l2tp. Fix this by making sure the UDP socket is of the proper family. BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018 CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382 __kasan_report.cold+0x20/0x38 mm/kasan/report.c:511 kasan_report+0x33/0x50 mm/kasan/common.c:625 setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523 l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline] genl_family_rcv_msg net/netlink/genetlink.c:718 [inline] genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e6/0x810 net/socket.c:2352 ___sys_sendmsg+0x100/0x170 net/socket.c:2406 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x45ca29 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4 Allocated by task 3018: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x161/0x7a0 mm/slab.c:3665 kmalloc include/linux/slab.h:560 [inline] sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612 sk_alloc+0x36/0x1100 net/core/sock.c:1666 data_sock_create drivers/isdn/mISDN/socket.c:600 [inline] mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Freed by task 2484: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] kasan_set_free_info mm/kasan/common.c:317 [inline] __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456 __cache_free mm/slab.c:3426 [inline] kfree+0x109/0x2b0 mm/slab.c:3757 kvfree+0x42/0x50 mm/util.c:603 __free_fdtable+0x2d/0x70 fs/file.c:31 put_files_struct fs/file.c:420 [inline] put_files_struct+0x248/0x2e0 fs/file.c:413 exit_files+0x7e/0xa0 fs/file.c:445 do_exit+0xb04/0x2dd0 kernel/exit.c:791 do_group_exit+0x125/0x340 kernel/exit.c:894 get_signal+0x47b/0x24e0 kernel/signal.c:2739 do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784 exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:279 [inline] do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305 entry_SYSCALL_64_after_hwframe+0x49/0xb3 The buggy address belongs to the object at ffff88808ed0c000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1424 bytes inside of 2048-byte region [ffff88808ed0c000, ffff88808ed0c800) The buggy address belongs to the page: page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00 raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 6b9f3423 ("l2tp: fix races in tunnel creation") Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Yang Yingliang authored
[ Upstream commit 1b49cd71 ] When devinet_sysctl_register() failed, the memory allocated in neigh_parms_alloc() should be freed. Fixes: 20e61da7 ("ipv4: fail early when creating netdev named all or default") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
- 07 Jun, 2020 5 commits
-
-
Greg Kroah-Hartman authored
-
Dinghao Liu authored
[ Upstream commit 539d39ad ] Remove runtime PM usage counter decrement when the increment function has not been called to keep the counter balanced. Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Amit Cohen authored
[ Upstream commit 46ca1117 ] Starting from iputils s20190709 (used in Fedora 31), arping does not support timeout being specified as a decimal: $ arping -c 1 -I swp1 -b 192.0.2.66 -q -w 0.1 arping: invalid argument: '0.1' Previously, such timeouts were rounded to an integer. Fix this by specifying the timeout as an integer. Fixes: a5ee171d ("selftests: mlxsw: qos_mc_aware: Add a test for UC awareness") Signed-off-by:
Amit Cohen <amitc@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Jonathan McDowell authored
[ Upstream commit a96ac8a0 ] The ipq806x_gmac_probe() function enables the PTP clock but not the appropriate interface clocks. This means that if the bootloader hasn't done so attempting to bring up the interface will fail with an error like: [ 59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma [ 59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed [ 59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed This patch, a slightly cleaned up version of one posted by Sergey Sergeev in: https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257 correctly enables the clock; we have already configured the source just before this. Tested on a MikroTik RB3011. Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
-
Valentin Longchamp authored
[ Upstream commit 79dde73c ] ugeth_quiesce/activate are used to halt the controller when there is a link change that requires to reconfigure the mac. The previous implementation called netif_device_detach(). This however causes the initial activation of the netdevice to fail precisely because it's detached. For details, see [1]. A possible workaround was the revert of commit net: linkwatch: add check for netdevice being present to linkwatch_do_dev However, the check introduced in the above commit is correct and shall be kept. The netif_device_detach() is thus replaced with netif_tx_stop_all_queues() that prevents any tranmission. This allows to perform mac config change required by the link change, without detaching the corresponding netdevice and thus not preventing its initial activation. [1] https://lists.openwall.net/netdev/2020/01/08/201 Signed-off-by:
Valentin Longchamp <valentin@longchamp.me> Acked-by:
Matteo Ghidoni <matteo.ghidoni@ch.abb.com> Signed-off-by:
-
